* Adapted from the FIRE (Fourier Image REsolution) plugin produced as part of the paper: * * Niewenhuizen, et al (2013). Measuring image resolution in optical nanoscopy. Nature Methods, 10, 557 * */ public class FRC { public enum ThresholdMethod { FIXED_1_OVER_7("Fixed 1/7"), HALF_BIT("Half-bit"), THREE_SIGMA("Three sigma"); private String name; private ThresholdMethod(String name) { this.name = name; } @Override public String toString() { return name; } }; // Properties controlling the algorithm /** * The correlation is computed using intervals around the circle circumference. The number of samples for half the * circle is computed as: Pi * radius * sampling factor */ public double perimeterSamplingFactor = 1; /** * The correlation is computed using intervals around the circle circumference of the Fourier transform. The Fourier * image is 2-fold radially symmetric and so the calculation can use only half the circle for speed. Note: The * results will differ slightly due to the implementation of the Fourier image not being exactly symmetric and the * sample points used on the perimeter not matching between the two semi-circles. */ public boolean useHalfCircle = true; /** * Calculate the Fourier Ring Correlation curve for two images. * * @param ip1 * @param ip2 * @return An array of triplets representing [][radius,correlation,N] where correlation is the FRC at the given * radius from the centre of the Fourier transform (i.e. 1/spatial frequency) and N is the number of samples * used to compute the correlation */ public double[][] calculateFrcCurve(ImageProcessor ip1, ImageProcessor ip2) { IJ.showStatus("Calculating complex FFT images..."); // Pad images to the same size final int maxWidth = FastMath.max(ip1.getWidth(), ip2.getWidth()); final int maxHeight = FastMath.max(ip1.getHeight(), ip2.getHeight()); ip1 = pad(ip1, maxWidth, maxHeight); ip2 = pad(ip2, maxWidth, maxHeight); // TODO - Can this be sped up by computing both FFT transforms together? FloatProcessor[] fft1 = getComplexFFT(ip1); FloatProcessor[] fft2 = getComplexFFT(ip2); IJ.showStatus("Preparing FRC curve calculation..."); final int size = fft1[0].getWidth(); // In-line for speed float[] numerator = new float[size * size]; float[] absFFT1 = new float[numerator.length]; float[] absFFT2 = new float[numerator.length]; float[] dataA1 = (float[]) fft1[0].getPixels(); float[] dataB1 = (float[]) fft1[1].getPixels(); float[] dataA2 = (float[]) fft2[0].getPixels(); float[] dataB2 = (float[]) fft2[1].getPixels(); for (int y = size, i = size * size - 1; y-- > 0;) { for (int x = size; x-- > 0; i--) { numerator[i] = dataA1[i] * dataA2[i] + dataB1[i] * dataB2[i]; absFFT1[i] = dataA1[i] * dataA1[i] + dataB1[i] * dataB1[i]; absFFT2[i] = dataA2[i] * dataA2[i] + dataB2[i] * dataB2[i]; } } int radius = 1; final double centre = size / 2; final double max = (Math.max(maxWidth, maxHeight)/2) - 1; IJ.showStatus("Calculating FRC curve..."); double[][] frcCurve = new double[(int) max][3]; // Radius zero is always 1 frcCurve[0][0] = 0; frcCurve[0][1] = 1; frcCurve[0][2] = 1; // Avoid divide by zero errors. Not sure if this is OK float[][] images = new float[][] { numerator, absFFT1, absFFT2 }; while (radius < max) { final double progress = (1.0 * radius) / max; IJ.showProgress(progress); IJ.showStatus("Calculating FRC curve...[Radius = " + radius + "px]"); // Inline the calculation for speed double sum1 = 0; double sum2 = 0; double sum3 = 0; // Circumference is 2*pi*r - double numSteps = perimeterSamplingFactor * Math.PI * radius; - double angleStep = 180.0 / numSteps; + double angleStep = 1 / (perimeterSamplingFactor * radius); double angle = 0D; int numSum = 0; - final double limit = (useHalfCircle) ? 180 : 360; + final double limit = (useHalfCircle) ? Math.PI : 2 * Math.PI; while (angle < limit) { - double x = centre + radius * Math.cos(angle / 360 * 2*Math.PI); - double y = centre + radius * Math.sin(angle / 360 * 2*Math.PI); + double x = centre + radius * Math.cos(angle); + double y = centre + radius * Math.sin(angle); double[] values = getInterpolatedValues(x, y, images, size); sum1 += values[0]; sum2 += values[1]; sum3 += values[2]; numSum++; angle += angleStep; } double val = sum1 / Math.sqrt(sum2 * sum3); frcCurve[radius][0] = radius; frcCurve[radius][1] = val; frcCurve[radius][2] = numSum; radius++; } IJ.showProgress(1); IJ.showStatus("Finished calculating FRC curve..."); return frcCurve; } private ImageProcessor pad(ImageProcessor ip, int width, int height) { // Make sure width and height are even width = width%2 == 0 ? width : width+1; height = height%2 == 0 ? height : height+1; if (ip.getWidth() != width || ip.getHeight() != height) { ImageProcessor ip2 = ip.createProcessor(width, height); ip2.insert(ip, 0, 0); ip = ip2; } return ip; } /** * Convert an image into a Fourier image with real and imaginary parts * * @param ip * @return the real and imaginary parts */ public FloatProcessor[] getComplexFFT(ImageProcessor ip) { FloatProcessor taperedDataImage = getSquareTaperedImage(ip); FHT fht = new FHT(taperedDataImage); fht.transform(); FloatProcessor[] ret = new FloatProcessor[2]; ImageStack stack1 = fht.getComplexTransform(); ret[0] = ((FloatProcessor) stack1.getProcessor(1)); ret[1] = ((FloatProcessor) stack1.getProcessor(2)); return ret; } // Cache the Tukey window function private float[] taperX = new float[0]; private float[] taperY = new float[0]; /** * Applies a Tukey window function to the image and then pads it to the next square size power of two. * * @param dataImage * @return The square tapered image */ public FloatProcessor getSquareTaperedImage(ImageProcessor dataImage) { // Use a Tukey window function taperX = getWindowFunction(taperX, dataImage.getWidth()); taperY = getWindowFunction(taperY, dataImage.getHeight()); final int size = FastMath.max(dataImage.getWidth(), dataImage.getHeight()); // Pad to a power of 2 int newSize = 0; for (int i = 4; i < 15; i++) { newSize = (int) Math.pow(2.0, i); if (size <= newSize) { break; } } if (size > newSize) return null; // Error dataImage = dataImage.toFloat(0, null); float[] data = (float[]) dataImage.getPixels(); float[] pixels = new float[newSize * newSize]; // Note that the limits at 0 and size-1 the taper is zero so this can be ignored final int maxy_1 = dataImage.getHeight() - 1; final int maxx_1 = dataImage.getWidth() - 1; final int oldWidth = dataImage.getWidth(); for (int y = 1; y < maxy_1; y++) { final float yTmp = taperY[y]; for (int x = 1, i = y * oldWidth + 1, ii = y * newSize + 1; x < maxx_1; x++, i++, ii++) { pixels[ii] = data[i] * taperX[x] * yTmp; } } return new FloatProcessor(newSize, newSize, pixels, null); } private float[] getWindowFunction(float[] taper, int size) { if (taper.length != size) { // Re-use cached values if (taperX.length == size) return taperX; if (taperY.length == size) return taperY; final int boundary = size / 8; final int upperBoundary = size - boundary; taper = new float[size]; for (int i = 0; i < size; i++) { if ((i < boundary) || (i > size - upperBoundary)) { taper[i] = (float) Math.pow(Math.sin(12.566370614359172D * i / size), 2.0D); } else { taper[i] = 1; } } } return taper; } /** * Adapted from ij.process.ImageProcessor.getInterpolatedValue(int,int). *
* Removed bounds checking and compute multiple values at the same time for multiple images. * * @param x * @param y * @return */ private double[] getInterpolatedValues(final double x, final double y, float[][] images, final int maxx) { final int xbase = (int) x; final int ybase = (int) y; double xFraction = x - xbase; double yFraction = y - ybase; if (xFraction < 0.0) xFraction = 0.0; if (yFraction < 0.0) yFraction = 0.0; final int lowerLeftIndex = ybase * maxx + xbase; final int lowerRightIndex = lowerLeftIndex + 1; final int upperLeftIndex = lowerLeftIndex + maxx; final int upperRightIndex = upperLeftIndex + 1; final int noImages = 3; //images.length; double[] values = new double[noImages]; for (int i = 0; i < noImages; i++) { final float[] image = images[i]; final double lowerLeft = image[lowerLeftIndex]; final double lowerRight = image[lowerRightIndex]; final double upperRight = image[upperLeftIndex]; final double upperLeft = image[upperRightIndex]; final double upperAverage = upperLeft + xFraction * (upperRight - upperLeft); final double lowerAverage = lowerLeft + xFraction * (lowerRight - lowerLeft); values[i] = lowerAverage + yFraction * (upperAverage - lowerAverage); } return values; } /** * Perform LOESS smoothing on the FRC curve. *
* The input curve is copied and then the correlation values are smoothed using a LOESS interpolation with the given * parameters. If smoothing fails the original curve values are returned. * * @param frcCurve * @param bandwidth * @param robustness * @return A new FRC curve */ public double[][] getSmoothedCurve(double[][] frcCurve, double bandwidth, int robustness) { double[][] sCurve = new double[frcCurve.length][3]; double[] xVals = new double[frcCurve.length]; double[] yVals = new double[frcCurve.length]; for (int i = 0; i < frcCurve.length; i++) { xVals[i] = frcCurve[i][0]; yVals[i] = frcCurve[i][1]; sCurve[i][0] = frcCurve[i][0]; sCurve[i][1] = frcCurve[i][1]; sCurve[i][2] = frcCurve[i][2]; } double[] ySmoothed = new double[frcCurve.length]; try { LoessInterpolator loess = new LoessInterpolator(bandwidth, robustness); ySmoothed = loess.smooth(xVals, yVals); for (int i = 0; i < frcCurve.length; i++) sCurve[i][1] = ySmoothed[i]; } catch (Exception e) { e.printStackTrace(); } return sCurve; } /** * Perform LOESS smoothing on the FRC curve *
* The input curve is copied and then the correlation values are smoothed using a LOESS interpolation with a * bandwidth of 0.0707 and robustness of 0. If smoothing fails the original curve values are returned. * * @param frcCurve * @return A new FRC curve */ public double[][] getSmoothedCurve(double[][] frcCurve) { double bandwidth = 0.0707; int robustness = 0; return getSmoothedCurve(frcCurve, bandwidth, robustness); } /** * Calculate the curve representing the minimum correlation required to distinguish two images for each resolution * in the input FRC curve. * * @param frcCurve * @param method * @return The threshold curve representing the threshold for each input spatial frequency */ public double[] calculateThresholdCurve(double[][] frcCurve, ThresholdMethod method) { double[] threshold = new double[frcCurve.length]; for (int i = 0; i < threshold.length; i++) { switch (method) { case HALF_BIT: - threshold[i] = ((0.2071 * Math.sqrt(frcCurve[i][2]) + 1.9102) / (1.2701 * Math.sqrt(frcCurve[i][2]) + 0.9102)); + threshold[i] = ((0.2071 * Math.sqrt(frcCurve[i][2]) + 1.9102) / (1.2071 * Math.sqrt(frcCurve[i][2]) + 0.9102)); break; case THREE_SIGMA: threshold[i] = (3.0 / Math.sqrt(frcCurve[i][2] / 2.0)); break; case FIXED_1_OVER_7: default: threshold[i] = 0.1428; } } return threshold; } /** * Computes the crossing points of the FRC curve and the threshold curve. The intersections can be used to determine * the image resolution using {@link #getCorrectIntersection(ArrayList, ThresholdMethod)} * * @param frcCurve * @param thresholdCurve * @return The crossing points */ public double[] getIntersections(double[][] frcCurve, double[] thresholdCurve) { if (frcCurve.length != thresholdCurve.length) { IJ.error("Error", "Unable to calculate FRC curve intersections due to input length mismatch."); return null; } double[] intersections = new double[frcCurve.length - 1]; int count = 0; for (int i = 1; i < frcCurve.length; i++) { // http://en.wikipedia.org/wiki/Line-line_intersection // // x1,y1 x4,y4 // ** ++ // ** ++ // **++ P(x,y) // ++ ** // ++ ** // ++ ** // x3,y3 ** // x2,y2 final double y1 = frcCurve[i - 1][1]; final double y2 = frcCurve[i][1]; final double y3 = thresholdCurve[i - 1]; final double y4 = thresholdCurve[i]; // Check if they cross if (!((y3 >= y1 && y4 < y2) || (y1 >= y3 && y2 < y4))) { continue; } final double x1 = frcCurve[i - 1][0]; final double x2 = frcCurve[i][0]; final double x3 = x1; final double x4 = x2; final double x1_x2 = x1 - x2; final double x3_x4 = x3 - x4; final double y1_y2 = y1 - y2; final double y3_y4 = y3 - y4; // Check if lines are parallel if (x1_x2 * y3_y4 - y1_y2 * x3_x4 == 0) { if (y1 == y3) // The lines are the same intersections[count++] = x1; } else { // Find intersection double px = ((x1 * y2 - y1 * x2) * x3_x4 - x1_x2 * (x3 * y4 - y3 * x4)) / (x1_x2 * y3_y4 - y1_y2 * x3_x4); //double px = ((x1 * y2 - y1 * x2) * (x3 - x4) - (x1 - x2) * (x3 * y4 - y3 * x4)) / // ((x1 - x2) * (y3 - y4) - (y1 - y2) * (x3 - x4)); //double py = ((x1 * y2 - y1 * x2) * (y3 - y4) - (y1 - y2) * (x3 * y4 - y3 * x4)) / // ((x1 - x2) * (y3 - y4) - (y1 - y2) * (x3 - x4)); // Check if the intersection is within the two points // Q. Is this necessary given the intersection check above? if (px >= x1 && px < x2) { intersections[count++] = px; } } } return Arrays.copyOf(intersections, count); } /** * Get the correction intersection representing the image resolution. The intersection chosen depends on the method * used to calculate the threshold curve using {@link #calculateThresholdCurve(double[][], ThresholdMethod)} *
* The intersection corresponds the lowest spatial frequency at which there is no significant correlation between * the images. * * @param intersections * @param method * @return The intersection (or zero if no crossings) */ public double getCorrectIntersection(double[] intersections, ThresholdMethod method) { if (intersections == null || intersections.length == 0) return 0; switch (method) { // The half-bit and 3-sigma curves are often above 1 at close to zero spatial frequency. // This means that any FRC curve starting at 1 may cross the line twice. // If so the second crossing is the one that is desired. case HALF_BIT: case THREE_SIGMA: return (intersections.length > 1) ? intersections[1] : intersections[0]; case FIXED_1_OVER_7: default: return intersections[0]; } } /** * Utility function that calculates the Fourier Image Resolution (FIRE) number using the provided images. * * @param ip1 * @param ip2 * @param method * @return The FIRE number (in pixels) */ public double calculateFireNumber(ImageProcessor ip1, ImageProcessor ip2, ThresholdMethod method) { double[][] frcCurve = calculateFrcCurve(ip1, ip2); return calculateFireNumber(frcCurve, method); } /** * Utility function that calculates the Fourier Image Resolution (FIRE) number using the provided FRC curve data. * * @param frcCurve * @param method * @return The FIRE number (in pixels) */ public double calculateFireNumber(double[][] frcCurve, ThresholdMethod method) { double[] thresholdCurve = calculateThresholdCurve(frcCurve, method); double[] intersections = getIntersections(frcCurve, thresholdCurve); double fire = Double.NaN; if (intersections == null || intersections.length != 0) { double spatialFrequency = getCorrectIntersection(intersections, method); // Since the Fourier calculation only uses half of the image (from centre to the edge) // we must double the curve length to get the original maximum image width. In addition // the computation was up to the edge-1 pixels so add back a pixel to the curve length. fire = 2 * (frcCurve.length + 1) / spatialFrequency; } return fire; } /** * Convenience function to batch calculate the FRC by going though file on two separate directories. * When one file name is identical in both directories, it opens them and computes the FRC. * If is_save_plot is true, then a plot of the FRC and FIRE calculations is saved in the parent of * directory1 in a folder named "Graphs" * NOTE: This only works for TIFF files at the moment. * * @param directory1 is the first directory containing data * @param directory2 is the first directory containing data * @param method is the {@link ThresholdMethod} used * @param rt is the {@link ij.measure.ResultsTable} where you want the batch to write the FIRE number to * @param is_save_plot defines whether the plot will be saved, as described above. */ public void batchCalculateFireNumber(File directory1, File directory2, ThresholdMethod method, ResultsTable rt, boolean is_save_plot) { // Navigate folder for tiffs String[] the_files = directory1.list(new FilenameFilter() { @Override public boolean accept(File dir, String name) { // check extensions - if(name.endsWith("tif")) - return true; - - return false; + return true; } }); // Prepare saving if necessary File save_dir = new File(directory1.getParentFile(), "Graphs"); save_dir.mkdir(); // For each file, open one in each directory for(String the_file : the_files) { File f1 = new File(directory1.getAbsolutePath()+File.separator+the_file); File f2 = new File(directory2.getAbsolutePath()+File.separator+the_file); if(f2.exists()) { ImagePlus i1 = IJ.openImage(f1.getAbsolutePath()); ImagePlus i2 = IJ.openImage(f2.getAbsolutePath()); // Finally calculate FRC double[][] frc_curve = calculateFrcCurve(i1.getProcessor(), i2.getProcessor()); double[][] smooth_frc = getSmoothedCurve(frc_curve); // Fourier Image REsolution number ("FIRE") double fire = calculateFireNumber(smooth_frc, method); rt.incrementCounter(); rt.addLabel(i1.getTitle()); rt.addValue("FRC ["+method+"]", fire); rt.addValue("FRC ["+method+"] Calibrated ["+i1.getCalibration().getUnit()+"]", fire*i1.getCalibration().pixelHeight); rt.show("FRC Results"); if(is_save_plot) { Plot p = doPlot(frc_curve, smooth_frc, method, fire, i1.getTitle()); - ImagePlus plot_image = p.makeHighResolution(null, 3, true, false); + ImagePlus plot_image = p.makeHighResolution("FRC", 3, true, false); String plot_name = save_dir.getAbsolutePath()+File.separator+f1.getName().substring(0,f1.getName().lastIndexOf(".")); plot_name += "_"+method.toString().replaceAll("/", " over ")+".tif"; IJ.save(plot_image, plot_name); } } } } /** * Simple method to plot the data using {@link ij.gui.Plot #Plot} * @param frc_curve is the raw FRC curve * @param smooth_frc is the smoothed curve computed using {@link #getSmoothedCurve(double[][])} or {@link #getSmoothedCurve(double[][], double, int)} * @param tm is the {@link ThresholdMethod} used * @param fire is the Fourier Image Resolution given by {@link #calculateFireNumber(double[][], ThresholdMethod)} * @param name is the title of the image that was used for the FRC calculations * @return a Plot object to use at your convenience */ public Plot doPlot(double[][] frc_curve, double[][] smooth_frc, ThresholdMethod tm, double fire, String name) { FRC frc = new FRC(); // Prepare arrays for Plot class double[] x = new double[frc_curve.length]; double[] y = new double[frc_curve.length]; double[] sy = new double[frc_curve.length]; for(int i=0; i