Page Menu
Home
c4science
Search
Configure Global Search
Log In
Files
F60085491
ext_uart.c
No One
Temporary
Actions
Download File
Edit File
Delete File
View Transforms
Subscribe
Mute Notifications
Award Token
Subscribers
None
File Metadata
Details
File Info
Storage
Attached
Created
Sat, Apr 27, 09:23
Size
10 KB
Mime Type
text/x-c
Expires
Mon, Apr 29, 09:23 (2 d)
Engine
blob
Format
Raw Data
Handle
17298044
Attached To
R2671 HHRI-software
ext_uart.c
View Options
/*
* Copyright (C) 2017 EPFL-LSRO (Laboratoire de Systemes Robotiques).
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "ext_uart.h"
#include "../lib/utils.h"
#define EXUART_RX_Pin GPIO_Pin_7
#define EXUART_RX_PinSource GPIO_PinSource7
#define EXUART_RX_Port GPIOB
#define EXUART_TX_Pin GPIO_Pin_6
#define EXUART_TX_PinSource GPIO_PinSource6
#define EXUART_TX_Port GPIOB
#define EXUART_PERIPH USART1
#define RX_DMA DMA2_Stream2
#define RX_DMA_CHANNEL DMA_Channel_4
#define TX_DMA DMA2_Stream7
#define TX_DMA_CHANNEL DMA_Channel_4
#define TX_BUFFER_SIZE 512
#define RX_BUFFER_SIZE 1024
#define USER_RX_QUEUE_SIZE 2048
uint8_t exuart_txBuffer[2][TX_BUFFER_SIZE];
uint8_t exuart_currentTxBufferToWriteTo;
uint16_t exuart_txBufferIndex;
uint16_t exuart_nBytesToTransferDma;
uint8_t exuart_rxBuffer[RX_BUFFER_SIZE];
uint8_t const * exuart_rxBuffTail;
uint8_t exuart_userRxQueue[USER_RX_QUEUE_SIZE];
cb_CircularBuffer exuart_rxQueue;
#define UART_DMA_TX_IS_BUSY (DMA_GetCmdStatus(TX_DMA) == ENABLE && DMA_GetCurrDataCounter(TX_DMA) > 0)
void exuart_FlushTx(void);
/**
* @brief Initializes the UART module.
* @param baudRate: UART communication frequency (baud rate) [b/s].
*/
void exuart_Init(uint32_t baudRate)
{
GPIO_InitTypeDef GPIO_InitStruct;
USART_InitTypeDef USART_InitStruct;
DMA_InitTypeDef DMA_InitStruct;
// Enable UART and DMA peripherals clocks.
RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE);
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_DMA2, ENABLE);
// Setup GPIOs as UART pins.
GPIO_InitStruct.GPIO_Pin = EXUART_TX_Pin;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStruct.GPIO_OType = GPIO_OType_PP;
GPIO_InitStruct.GPIO_PuPd = GPIO_PuPd_UP;
GPIO_Init(EXUART_TX_Port, &GPIO_InitStruct);
GPIO_PinAFConfig(EXUART_TX_Port, EXUART_TX_PinSource, GPIO_AF_USART1);
GPIO_InitStruct.GPIO_Pin = EXUART_RX_Pin;
GPIO_Init(EXUART_RX_Port, &GPIO_InitStruct);
GPIO_PinAFConfig(EXUART_RX_Port, EXUART_RX_PinSource, GPIO_AF_USART1);
// Setup the UART peripheral.
USART_InitStruct.USART_BaudRate = baudRate;
USART_InitStruct.USART_WordLength = USART_WordLength_8b;
USART_InitStruct.USART_StopBits = USART_StopBits_1;
USART_InitStruct.USART_Parity = USART_Parity_No;
USART_InitStruct.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStruct.USART_Mode = USART_Mode_Tx | USART_Mode_Rx;
USART_Init(EXUART_PERIPH, &USART_InitStruct);
USART_Cmd(EXUART_PERIPH, ENABLE);
// Setup the DMA for RX.
DMA_DeInit(RX_DMA);
DMA_InitStruct.DMA_Channel = RX_DMA_CHANNEL;
DMA_InitStruct.DMA_PeripheralBaseAddr = (uint32_t)&EXUART_PERIPH->DR;
DMA_InitStruct.DMA_Memory0BaseAddr = (uint32_t)&exuart_rxBuffer[0];
DMA_InitStruct.DMA_DIR = DMA_DIR_PeripheralToMemory;
DMA_InitStruct.DMA_BufferSize = RX_BUFFER_SIZE;
DMA_InitStruct.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
DMA_InitStruct.DMA_MemoryInc = DMA_MemoryInc_Enable;
DMA_InitStruct.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
DMA_InitStruct.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
DMA_InitStruct.DMA_Mode = DMA_Mode_Circular;
DMA_InitStruct.DMA_Priority = DMA_Priority_Medium;
DMA_InitStruct.DMA_FIFOMode = DMA_FIFOMode_Disable;
DMA_InitStruct.DMA_MemoryBurst = DMA_MemoryBurst_Single;
DMA_InitStruct.DMA_PeripheralBurst = DMA_PeripheralBurst_Single;
DMA_Init(RX_DMA, &DMA_InitStruct);
USART_DMACmd(EXUART_PERIPH, USART_DMAReq_Rx | USART_DMAReq_Tx, ENABLE);
DMA_ITConfig(RX_DMA, DMA_IT_TC, ENABLE);
DMA_Cmd(RX_DMA, ENABLE);
exuart_rxBuffTail = &exuart_rxBuffer[0];
// Setup the DMA for TX.
DMA_DeInit(TX_DMA);
DMA_InitStruct.DMA_Channel = TX_DMA_CHANNEL;
DMA_InitStruct.DMA_PeripheralBaseAddr = (uint32_t)&EXUART_PERIPH->DR;
DMA_InitStruct.DMA_Memory0BaseAddr = (uint32_t)&exuart_txBuffer[0][0];
DMA_InitStruct.DMA_DIR = DMA_DIR_MemoryToPeripheral;
DMA_InitStruct.DMA_BufferSize = TX_BUFFER_SIZE;
DMA_InitStruct.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
DMA_InitStruct.DMA_MemoryInc = DMA_MemoryInc_Enable;
DMA_InitStruct.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
DMA_InitStruct.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
DMA_InitStruct.DMA_Mode = DMA_Mode_Normal;
DMA_InitStruct.DMA_Priority = DMA_Priority_Medium;
DMA_InitStruct.DMA_FIFOMode = DMA_FIFOMode_Disable;
DMA_InitStruct.DMA_MemoryBurst = DMA_MemoryBurst_Single;
DMA_InitStruct.DMA_PeripheralBurst = DMA_PeripheralBurst_Single;
DMA_Init(TX_DMA, &DMA_InitStruct);
USART_DMACmd(EXUART_PERIPH, USART_DMAReq_Rx | USART_DMAReq_Tx, ENABLE);
DMA_ITConfig(TX_DMA, DMA_IT_TC, ENABLE);
// Initialize the RX circular buffer.
cb_Init(&exuart_rxQueue, exuart_userRxQueue, USER_RX_QUEUE_SIZE);
// Initialize the variables for the UART TX.
exuart_currentTxBufferToWriteTo = 0;
exuart_txBufferIndex = 0;
exuart_nBytesToTransferDma = 0;
}
/**
* @brief Gets the number of bytes received and ready to read.
* @return the number of bytes ready to be acquired with exuart_GetByte().
* @remark This function must called often, otherwise the DMA RX buffer may be
* full, and data will be lost.
*/
uint16_t exuart_ReceivedBytesCount(void)
{
// Get the location of the location currently pointed by the DMA.
uint8_t const * head = exuart_rxBuffer + RX_BUFFER_SIZE
- DMA_GetCurrDataCounter(RX_DMA);
// Even if the STM32F4 reference manual (RM0090) states that the NDTR
// register is decremented after the transfer, this is not the case.
// So we wait a few cycles to be sure that the DMA actually performed the
// transfer.
utils_DelayUs(1);
// RX: add the received bytes into the user queue.
while(exuart_rxBuffTail != head)
{
uint8_t b = *exuart_rxBuffTail;
cb_Push(&exuart_rxQueue, b);
exuart_rxBuffTail++;
if(exuart_rxBuffTail >= exuart_rxBuffer + RX_BUFFER_SIZE)
exuart_rxBuffTail -= RX_BUFFER_SIZE;
}
// Return the number of bytes ready to get.
return cb_ItemsCount(&exuart_rxQueue);
}
/**
* @brief Gets the next received byte.
* @return the value of the received byte.
* @remark call exuart_ReceivedBytesCount() before calling this function.
* @warning this function return 0 if no byte is available.
*/
uint8_t exuart_GetByte(void)
{
if(cb_ItemsCount(&exuart_rxQueue) > 0)
return cb_Pull(&exuart_rxQueue);
else
return 0;
}
/**
* @brief Starts the DMA transfer to send bytes to UART peripheral.
*/
void exuart_StartDma(void)
{
DMA_InitTypeDef DMA_InitStruct;
//
exuart_nBytesToTransferDma = exuart_txBufferIndex;
exuart_currentTxBufferToWriteTo = !exuart_currentTxBufferToWriteTo;
exuart_txBufferIndex = 0;
// Start the DMA transfer.
DMA_DeInit(TX_DMA);
DMA_InitStruct.DMA_Channel = TX_DMA_CHANNEL;
DMA_InitStruct.DMA_PeripheralBaseAddr = (uint32_t)&EXUART_PERIPH->DR;
DMA_InitStruct.DMA_Memory0BaseAddr = (uint32_t)&exuart_txBuffer[!exuart_currentTxBufferToWriteTo][0];
DMA_InitStruct.DMA_DIR = DMA_DIR_MemoryToPeripheral;
DMA_InitStruct.DMA_BufferSize = exuart_nBytesToTransferDma;
DMA_InitStruct.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
DMA_InitStruct.DMA_MemoryInc = DMA_MemoryInc_Enable;
DMA_InitStruct.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
DMA_InitStruct.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
DMA_InitStruct.DMA_Mode = DMA_Mode_Normal;
DMA_InitStruct.DMA_Priority = DMA_Priority_Medium;
DMA_InitStruct.DMA_FIFOMode = DMA_FIFOMode_Disable;
DMA_InitStruct.DMA_MemoryBurst = DMA_MemoryBurst_Single;
DMA_InitStruct.DMA_PeripheralBurst = DMA_PeripheralBurst_Single;
DMA_Init(TX_DMA, &DMA_InitStruct);
DMA_Cmd(TX_DMA, ENABLE);
}
/**
* @brief Asynchronously sends the given byte through the UART bus.
* @param data the data byte to send.
*/
void exuart_SendByteAsync(uint8_t data)
{
// Check that it is possible to write in the current buffer.
if(exuart_txBufferIndex >= TX_BUFFER_SIZE)
{
// If the DMA is idle, switch to the other buffer.
if(UART_DMA_TX_IS_BUSY)
{
utils_TrapCpu(); // Error, can't write anywhere!
return;
}
else
exuart_StartDma();
}
// Write the byte in the buffer.
exuart_txBuffer[exuart_currentTxBufferToWriteTo][exuart_txBufferIndex] = data;
exuart_txBufferIndex++;
// If the buffer is full, start the DMA transfer.
if(exuart_txBufferIndex == TX_BUFFER_SIZE)
exuart_StartDma();
//
exuart_FlushTx();
}
/**
* @brief Asynchronously sends the given bytes through the UART bus.
* @param data pointer to the data bytes array to send.
* @param length number of bytes to send (array size).
*/
void exuart_SendBytesAsync(uint8_t *data, int length)
{
while(length > 0)
{
uint16_t nBytesToWriteInBuf;
// Check that it is possible to write in the current buffer.
if(exuart_txBufferIndex >= TX_BUFFER_SIZE)
{
// If the DMA is idle, switch to the other buffer.
if(UART_DMA_TX_IS_BUSY)
{
utils_TrapCpu(); // Error, can't write anywhere!
return;
}
else
exuart_StartDma();
}
// Write as many bytes as possible in the current buffer.
nBytesToWriteInBuf = TX_BUFFER_SIZE - exuart_txBufferIndex;
if(nBytesToWriteInBuf > length)
nBytesToWriteInBuf = length;
memcpy(&exuart_txBuffer[exuart_currentTxBufferToWriteTo][exuart_txBufferIndex],
data, nBytesToWriteInBuf);
exuart_txBufferIndex += nBytesToWriteInBuf;
data += nBytesToWriteInBuf;
length -= nBytesToWriteInBuf;
// If the buffer is full, start the DMA transfer.
if(exuart_txBufferIndex == TX_BUFFER_SIZE)
exuart_StartDma();
}
//
exuart_FlushTx();
}
/**
* @brief Start the DMA to send the bytes waiting in the intermediate buffer.
*/
void exuart_FlushTx(void)
{
if(exuart_txBufferIndex > 0 && !UART_DMA_TX_IS_BUSY)
exuart_StartDma();
}
Event Timeline
Log In to Comment