Homec4science
Diffusion invenio-infoscience (iugw2017) Browse

R3600/config/invenio.conf
c0904eadf08fiugw2017

Last Change
Raw File

invenio.conf
View Options

## This file is part of Invenio.
## Copyright (C) 2008, 2009, 2010, 2011 CERN.
##
## Invenio is free software; you can redistribute it and/or
## modify it under the terms of the GNU General Public License as
## published by the Free Software Foundation; either version 2 of the
## License, or (at your option) any later version.
##
## Invenio is distributed in the hope that it will be useful, but
## WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
## General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with Invenio; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
###################################################
## About 'invenio.conf' and 'invenio-local.conf' ##
###################################################
## The 'invenio.conf' file contains the vanilla default configuration
## parameters of a Invenio installation, as coming out of the
## distribution. The file should be self-explanatory. Once installed
## in its usual location (usually /opt/invenio/etc), you could in
## principle go ahead and change the values according to your local
## needs, but this is not advised.
##
## If you would like to customize some of these parameters, you should
## rather create a file named 'invenio-local.conf' in the same
## directory where 'invenio.conf' lives and you should write there
## only the customizations that you want to be different from the
## vanilla defaults.
##
## Here is a realistic, minimalist, yet production-ready example of
## what you would typically put there:
##
## $ cat /opt/invenio/etc/invenio-local.conf
## [Invenio]
## CFG_SITE_NAME = John Doe's Document Server
## CFG_SITE_NAME_INTL_fr = Serveur des Documents de John Doe
## CFG_SITE_URL = http://your.site.com
## CFG_SITE_SECURE_URL = https://your.site.com
## CFG_SITE_ADMIN_EMAIL = john.doe@your.site.com
## CFG_SITE_SUPPORT_EMAIL = john.doe@your.site.com
## CFG_WEBALERT_ALERT_ENGINE_EMAIL = john.doe@your.site.com
## CFG_WEBCOMMENT_ALERT_ENGINE_EMAIL = john.doe@your.site.com
## CFG_WEBCOMMENT_DEFAULT_MODERATOR = john.doe@your.site.com
## CFG_DATABASE_HOST = localhost
## CFG_DATABASE_NAME = invenio
## CFG_DATABASE_USER = invenio
## CFG_DATABASE_PASS = my123p$ss
##
## You should override at least the parameters mentioned above and the
## parameters mentioned in the `Part 1: Essential parameters' below in
## order to define some very essential runtime parameters such as the
## name of your document server (CFG_SITE_NAME and
## CFG_SITE_NAME_INTL_*), the visible URL of your document server
## (CFG_SITE_URL and CFG_SITE_SECURE_URL), the email address of the
## local Invenio administrator, comment moderator, and alert engine
## (CFG_SITE_SUPPORT_EMAIL, CFG_SITE_ADMIN_EMAIL, etc), and last but
## not least your database credentials (CFG_DATABASE_*).
##
## The Invenio system will then read both the default invenio.conf
## file and your customized invenio-local.conf file and it will
## override any default options with the ones you have specified in
## your local file. This cascading of configuration parameters will
## ease your future upgrades.
[Invenio]
###################################
## Part 1: Essential parameters ##
###################################
## This part defines essential Invenio internal parameters that
## everybody should override, like the name of the server or the email
## address of the local Invenio administrator.
## CFG_DATABASE_* - specify which MySQL server to use, the name of the
## database to use, and the database access credentials.
CFG_DATABASE_HOST = localhost
CFG_DATABASE_PORT = 3306
CFG_DATABASE_NAME = invenio
CFG_DATABASE_USER = invenio
CFG_DATABASE_PASS = my123p$ss
## CFG_SITE_URL - specify URL under which your installation will be
## visible. For example, use "http://your.site.com". Do not leave
## trailing slash.
CFG_SITE_URL = http://localhost
## CFG_SITE_SECURE_URL - specify secure URL under which your
## installation secure pages such as login or registration will be
## visible. For example, use "https://your.site.com". Do not leave
## trailing slash. If you don't plan on using HTTPS, then you may
## leave this empty.
CFG_SITE_SECURE_URL = https://localhost
## CFG_SITE_NAME -- the visible name of your Invenio installation.
CFG_SITE_NAME = Atlantis Institute of Fictive Science
## CFG_SITE_NAME_INTL -- the international versions of CFG_SITE_NAME
## in various languages. (See also CFG_SITE_LANGS below.)
CFG_SITE_NAME_INTL_en = Atlantis Institute of Fictive Science
CFG_SITE_NAME_INTL_fr = Atlantis Institut des Sciences Fictives
CFG_SITE_NAME_INTL_de = Atlantis Institut der fiktiven Wissenschaft
CFG_SITE_NAME_INTL_es = Atlantis Instituto de la Ciencia Fictive
CFG_SITE_NAME_INTL_ca = Institut Atlantis de Ciència Fictícia
CFG_SITE_NAME_INTL_pt = Instituto Atlantis de Ciência Fictícia
CFG_SITE_NAME_INTL_it = Atlantis Istituto di Scienza Fittizia
CFG_SITE_NAME_INTL_ru = Институт Фиктивных Наук Атлантиды
CFG_SITE_NAME_INTL_sk = Atlantis Inštitút Fiktívnych Vied
CFG_SITE_NAME_INTL_cs = Atlantis Institut Fiktivních Věd
CFG_SITE_NAME_INTL_no = Atlantis Institutt for Fiktiv Vitenskap
CFG_SITE_NAME_INTL_sv = Atlantis Institut för Fiktiv Vetenskap
CFG_SITE_NAME_INTL_el = Ινστιτούτο Φανταστικών Επιστημών Ατλαντίδος
CFG_SITE_NAME_INTL_uk = Інститут вигаданих наук в Атлантісі
CFG_SITE_NAME_INTL_ja = Fictive 科学のAtlantis の協会
CFG_SITE_NAME_INTL_pl = Instytut Fikcyjnej Nauki Atlantis
CFG_SITE_NAME_INTL_bg = Институт за фиктивни науки Атлантис
CFG_SITE_NAME_INTL_hr = Institut Fiktivnih Znanosti Atlantis
CFG_SITE_NAME_INTL_zh_CN = 阿特兰提斯虚拟科学学院
CFG_SITE_NAME_INTL_zh_TW = 阿特蘭提斯虛擬科學學院
CFG_SITE_NAME_INTL_hu = Kitalált Tudományok Atlantiszi Intézete
CFG_SITE_NAME_INTL_af = Atlantis Instituut van Fiktiewe Wetenskap
CFG_SITE_NAME_INTL_gl = Instituto Atlantis de Ciencia Fictive
CFG_SITE_NAME_INTL_ro = Institutul Atlantis al Ştiinţelor Fictive
CFG_SITE_NAME_INTL_rw = Atlantis Ishuri Rikuru Ry'ubuhanga
CFG_SITE_NAME_INTL_ka = ატლანტიდის ფიქტიური მეცნიერების ინსტიტუტი
CFG_SITE_NAME_INTL_lt = Fiktyvių Mokslų Institutas Atlantis
CFG_SITE_NAME_INTL_ar = معهد أطلنطيس للعلوم الافتراضية
## CFG_SITE_LANG -- the default language of the interface: '
CFG_SITE_LANG = en
## CFG_SITE_LANGS -- list of all languages the user interface should
## be available in, separated by commas. The order specified below
## will be respected on the interface pages. A good default would be
## to use the alphabetical order. Currently supported languages
## include Afrikaans, Arabic, Bulgarian, Catalan, Czech, German, Georgian,
## Greek, English, Spanish, French, Croatian, Hungarian, Galician,
## Italian, Japanese, Kinyarwanda, Lithuanian, Norwegian, Polish,
## Portuguese, Romanian, Russian, Slovak, Swedish, Ukrainian, Chinese
## (China), Chinese (Taiwan), so that the eventual maximum you can
## currently select is
## "af,ar,bg,ca,cs,de,el,en,es,fr,hr,gl,ka,it,rw,lt,hu,ja,no,pl,pt,ro,ru,sk,sv,uk,zh_CN,zh_TW".
CFG_SITE_LANGS = af,ar,bg,ca,cs,de,el,en,es,fr,hr,gl,ka,it,rw,lt,hu,ja,no,pl,pt,ro,ru,sk,sv,uk,zh_CN,zh_TW
## CFG_SITE_SUPPORT_EMAIL -- the email address of the support team for
## this installation:
CFG_SITE_SUPPORT_EMAIL = info@invenio-software.org
## CFG_SITE_ADMIN_EMAIL -- the email address of the 'superuser' for
## this installation. Enter your email address below and login with
## this address when using Invenio inistration modules. You
## will then be automatically recognized as superuser of the system.
CFG_SITE_ADMIN_EMAIL = info@invenio-software.org
## CFG_SITE_EMERGENCY_EMAIL_ADDRESSES -- list of email addresses to
## which an email should be sent in case of emergency (e.g. bibsched
## queue has been stopped because of an error). Configuration
## dictionary allows for different recipients based on weekday and
## time-of-day. Example:
##
## CFG_SITE_EMERGENCY_EMAIL_ADDRESSES = {
## 'Sunday 22:00-06:00': '0041761111111@email2sms.foo.com',
## '06:00-18:00': 'team-in-europe@foo.com,0041762222222@email2sms.foo.com',
## '18:00-06:00': 'team-in-usa@foo.com',
## '*': 'john.doe.phone@foo.com'}
##
## If you want the emergency email notifications to always go to the
## same address, just use the wildcard line in the above example.
CFG_SITE_EMERGENCY_EMAIL_ADDRESSES = {}
## CFG_SITE_ADMIN_EMAIL_EXCEPTIONS -- set this to 0 if you do not want
## to receive any captured exception via email to CFG_SITE_ADMIN_EMAIL
## address. Captured exceptions will still be available in
## var/log/invenio.err file. Set this to 1 if you want to receive
## some of the captured exceptions (this depends on the actual place
## where the exception is captured). Set this to 2 if you want to
## receive all captured exceptions.
CFG_SITE_ADMIN_EMAIL_EXCEPTIONS = 1
## CFG_SITE_RECORD -- what is the URI part representing detailed
## record pages? We recomment to leave the default value `record'
## unchanged.
CFG_SITE_RECORD = record
## CFG_ERRORLIB_RESET_EXCEPTION_NOTIFICATION_COUNTER_AFTER -- set this to
## the number of seconds after which to reset the exception notification
## counter. A given repetitive exception is notified via email with a
## logarithmic strategy: the first time it is seen it is sent via email,
## then the second time, then the fourth, then the eighth and so forth.
## If the number of seconds elapsed since the last time it was notified
## is greater than CFG_ERRORLIB_RESET_EXCEPTION_NOTIFICATION_COUNTER_AFTER
## then the internal counter is reset in order not to have exception
## notification become more and more rare.
CFG_ERRORLIB_RESET_EXCEPTION_NOTIFICATION_COUNTER_AFTER = 14400
## CFG_CERN_SITE -- do we want to enable CERN-specific code?
## Put "1" for "yes" and "0" for "no".
CFG_CERN_SITE = 0
## CFG_INSPIRE_SITE -- do we want to enable INSPIRE-specific code?
## Put "1" for "yes" and "0" for "no".
CFG_INSPIRE_SITE = 0
## CFG_ADS_SITE -- do we want to enable ADS-specific code?
## Put "1" for "yes" and "0" for "no".
CFG_ADS_SITE = 0
## CFG_OPENAIRE_SITE -- do we want to enable OpenAIRE-specific code?
## Put "1" for "yes" and "0" for "no".
CFG_OPENAIRE_SITE = 0
## CFG_DEVEL_SITE -- is this a development site? If it is, you might
## prefer that it does not do certain things. For example, you might
## not want WebSubmit to send certain emails or trigger certain
## processes on a development site.
## Put "1" for "yes" (this is a development site) or "0" for "no"
## (this isn't a development site.)
CFG_DEVEL_SITE = 0
################################
## Part 2: Web page style ##
################################
## The variables affecting the page style. The most important one is
## the 'template skin' you would like to use and the obfuscation mode
## for your email addresses. Please refer to the WebStyle Admin Guide
## for more explanation. The other variables are listed here mostly
## for backwards compatibility purposes only.
## CFG_WEBSTYLE_TEMPLATE_SKIN -- what template skin do you want to
## use?
CFG_WEBSTYLE_TEMPLATE_SKIN = default
## CFG_WEBSTYLE_EMAIL_ADDRESSES_OBFUSCATION_MODE. How do we "protect"
## email addresses from undesired automated email harvesters? This
## setting will not affect 'support' and 'admin' emails.
## NOTE: there is no ultimate solution to protect against email
## harvesting. All have drawbacks and can more or less be
## circumvented. Choose you preferred mode ([t] means "transparent"
## for the user):
## -1: hide all emails.
## [t] 0 : no protection, email returned as is.
## foo@example.com => foo@example.com
## 1 : basic email munging: replaces @ by [at] and . by [dot]
## foo@example.com => foo [at] example [dot] com
## [t] 2 : transparent name mangling: characters are replaced by
## equivalent HTML entities.
## foo@example.com => foo@example.com
## [t] 3 : javascript insertion. Requires Javascript enabled on client
## side.
## 4 : replaces @ and . characters by gif equivalents.
## foo@example.com => foo<img src="at.gif" alt=" [at] ">example<img src="dot.gif" alt=" [dot] ">com
CFG_WEBSTYLE_EMAIL_ADDRESSES_OBFUSCATION_MODE = 2
## CFG_WEBSTYLE_INSPECT_TEMPLATES -- Do we want to debug all template
## functions so that they would return HTML results wrapped in
## comments indicating which part of HTML page was created by which
## template function? Useful only for debugging Pythonic HTML
## template. See WebStyle Admin Guide for more information.
CFG_WEBSTYLE_INSPECT_TEMPLATES = 0
## (deprecated) CFG_WEBSTYLE_CDSPAGEBOXLEFTTOP -- eventual global HTML
## left top box:
CFG_WEBSTYLE_CDSPAGEBOXLEFTTOP =
## (deprecated) CFG_WEBSTYLE_CDSPAGEBOXLEFTBOTTOM -- eventual global
## HTML left bottom box:
CFG_WEBSTYLE_CDSPAGEBOXLEFTBOTTOM =
## (deprecated) CFG_WEBSTYLE_CDSPAGEBOXRIGHTTOP -- eventual global
## HTML right top box:
CFG_WEBSTYLE_CDSPAGEBOXRIGHTTOP =
## (deprecated) CFG_WEBSTYLE_CDSPAGEBOXRIGHTBOTTOM -- eventual global
## HTML right bottom box:
CFG_WEBSTYLE_CDSPAGEBOXRIGHTBOTTOM =
## CFG_WEBSTYLE_HTTP_STATUS_ALERT_LIST -- when certain HTTP status
## codes are raised to the WSGI handler, the corresponding exceptions
## and error messages can be sent to the system administrator for
## inspecting. This is useful to detect and correct errors. The
## variable represents a comma-separated list of HTTP statuses that
## should alert admin. Wildcards are possible. If the status is
## followed by an "r", it means that a referer is required to exist
## (useful to distinguish broken known links from URL typos when 404
## errors are raised).
CFG_WEBSTYLE_HTTP_STATUS_ALERT_LIST = 404r,400,5*,41*
## CFG_WEBSTYLE_HTTP_USE_COMPRESSION -- whether to enable deflate
## compression of your HTTP/HTTPS connections. This will affect the Apache
## configuration snippets created by inveniocfg --create-apache-conf and
## the OAI-PMH Identify response.
CFG_WEBSTYLE_HTTP_USE_COMPRESSION = 0
## CFG_WEBSTYLE_REVERSE_PROXY_IPS -- if you are setting a multinode
## environment where an HTTP proxy such as mod_proxy is sitting in
## front of the Invenio web application and is forwarding requests to
## worker nodes, set here the the list of IP addresses of the allowed
## HTTP proxies. This is needed in order to avoid IP address spoofing
## when worker nodes are also available on the public Internet and
## might receive forged HTTP requests. Only HTTP requests coming from
## the specified IP addresses will be considered as forwarded from a
## reverse proxy. E.g. set this to '123.123.123.123'.
CFG_WEBSTYLE_REVERSE_PROXY_IPS =
##################################
## Part 3: WebSearch parameters ##
##################################
## This section contains some configuration parameters for WebSearch
## module. Please note that WebSearch is mostly configured on
## run-time via its WebSearch Admin web interface. The parameters
## below are the ones that you do not probably want to modify very
## often during the runtime. (Note that you may modify them
## afterwards too, though.)
## CFG_WEBSEARCH_SEARCH_CACHE_SIZE -- how many queries we want to
## cache in memory per one Apache httpd process? This cache is used
## mainly for "next/previous page" functionality, but it caches also
## "popular" user queries if more than one user happen to search for
## the same thing. Note that large numbers may lead to great memory
## consumption. We recommend a value not greater than 100.
CFG_WEBSEARCH_SEARCH_CACHE_SIZE = 0
## CFG_WEBSEARCH_FIELDS_CONVERT -- if you migrate from an older
## system, you may want to map field codes of your old system (such as
## 'ti') to Invenio/MySQL ("title"). Use Python dictionary syntax
## for the translation table, e.g. {'wau':'author', 'wti':'title'}.
## Usually you don't want to do that, and you would use empty dict {}.
CFG_WEBSEARCH_FIELDS_CONVERT = {}
## CFG_WEBSEARCH_LIGHTSEARCH_PATTERN_BOX_WIDTH -- width of the
## search pattern window in the light search interface, in
## characters. CFG_WEBSEARCH_LIGHTSEARCH_PATTERN_BOX_WIDTH = 60
CFG_WEBSEARCH_LIGHTSEARCH_PATTERN_BOX_WIDTH = 60
## CFG_WEBSEARCH_SIMPLESEARCH_PATTERN_BOX_WIDTH -- width of the search
## pattern window in the simple search interface, in characters.
CFG_WEBSEARCH_SIMPLESEARCH_PATTERN_BOX_WIDTH = 40
## CFG_WEBSEARCH_ADVANCEDSEARCH_PATTERN_BOX_WIDTH -- width of the
## search pattern window in the advanced search interface, in
## characters.
CFG_WEBSEARCH_ADVANCEDSEARCH_PATTERN_BOX_WIDTH = 30
## CFG_WEBSEARCH_NB_RECORDS_TO_SORT -- how many records do we still
## want to sort? For higher numbers we print only a warning and won't
## perform any sorting other than default 'latest records first', as
## sorting would be very time consuming then. We recommend a value of
## not more than a couple of thousands.
CFG_WEBSEARCH_NB_RECORDS_TO_SORT = 1000
## CFG_WEBSEARCH_CALL_BIBFORMAT -- if a record is being displayed but
## it was not preformatted in the "HTML brief" format, do we want to
## call BibFormatting on the fly? Put "1" for "yes" and "0" for "no".
## Note that "1" will display the record exactly as if it were fully
## preformatted, but it may be slow due to on-the-fly processing; "0"
## will display a default format very fast, but it may not have all
## the fields as in the fully preformatted HTML brief format. Note
## also that this option is active only for old (PHP) formats; the new
## (Python) formats are called on the fly by default anyway, since
## they are much faster. When usure, please set "0" here.
CFG_WEBSEARCH_CALL_BIBFORMAT = 0
## CFG_WEBSEARCH_USE_ALEPH_SYSNOS -- do we want to make old SYSNOs
## visible rather than MySQL's record IDs? You may use this if you
## migrate from a different e-doc system, and you store your old
## system numbers into 970__a. Put "1" for "yes" and "0" for
## "no". Usually you don't want to do that, though.
CFG_WEBSEARCH_USE_ALEPH_SYSNOS = 0
## CFG_WEBSEARCH_I18N_LATEST_ADDITIONS -- Put "1" if you want the
## "Latest Additions" in the web collection pages to show
## internationalized records. Useful only if your brief BibFormat
## templates contains internationalized strings. Otherwise put "0" in
## order not to slow down the creation of latest additions by WebColl.
CFG_WEBSEARCH_I18N_LATEST_ADDITIONS = 0
## CFG_WEBSEARCH_INSTANT_BROWSE -- the number of records to display
## under 'Latest Additions' in the web collection pages.
CFG_WEBSEARCH_INSTANT_BROWSE = 10
## CFG_WEBSEARCH_INSTANT_BROWSE_RSS -- the number of records to
## display in the RSS feed.
CFG_WEBSEARCH_INSTANT_BROWSE_RSS = 25
## CFG_WEBSEARCH_RSS_I18N_COLLECTIONS -- comma-separated list of
## collections that feature an internationalized RSS feed on their
## main seach interface page created by webcoll. Other collections
## will have RSS feed using CFG_SITE_LANG.
CFG_WEBSEARCH_RSS_I18N_COLLECTIONS =
## CFG_WEBSEARCH_RSS_TTL -- number of minutes that indicates how long
## a feed cache is valid.
CFG_WEBSEARCH_RSS_TTL = 360
## CFG_WEBSEARCH_RSS_MAX_CACHED_REQUESTS -- maximum number of request kept
## in cache. If the cache is filled, following request are not cached.
CFG_WEBSEARCH_RSS_MAX_CACHED_REQUESTS = 1000
## CFG_WEBSEARCH_AUTHOR_ET_AL_THRESHOLD -- up to how many author names
## to print explicitely; for more print "et al". Note that this is
## used in default formatting that is seldomly used, as usually
## BibFormat defines all the format. The value below is only used
## when BibFormat fails, for example.
CFG_WEBSEARCH_AUTHOR_ET_AL_THRESHOLD = 3
## CFG_WEBSEARCH_NARROW_SEARCH_SHOW_GRANDSONS -- whether to show or
## not collection grandsons in Narrow Search boxes (sons are shown by
## default, grandsons are configurable here). Use 0 for no and 1 for
## yes.
CFG_WEBSEARCH_NARROW_SEARCH_SHOW_GRANDSONS = 1
## CFG_WEBSEARCH_CREATE_SIMILARLY_NAMED_AUTHORS_LINK_BOX -- shall we
## create help links for Ellis, Nick or Ellis, Nicholas and friends
## when Ellis, N was searched for? Useful if you have one author
## stored in the database under several name formats, namely surname
## comma firstname and surname comma initial cataloging policy. Use 0
## for no and 1 for yes.
CFG_WEBSEARCH_CREATE_SIMILARLY_NAMED_AUTHORS_LINK_BOX = 1
## CFG_WEBSEARCH_USE_MATHJAX_FOR_FORMATS -- MathJax is a JavaScript
## library that renders (La)TeX mathematical formulas in the client
## browser. This parameter must contain a comma-separated list of
## output formats for which to apply the MathJax rendering, for example
## "hb,hd". If the list is empty, MathJax is disabled.
CFG_WEBSEARCH_USE_MATHJAX_FOR_FORMATS =
## CFG_WEBSEARCH_EXTERNAL_COLLECTION_SEARCH_TIMEOUT -- when searching
## external collections (e.g. SPIRES, CiteSeer, etc), how many seconds
## do we wait for reply before abandonning?
CFG_WEBSEARCH_EXTERNAL_COLLECTION_SEARCH_TIMEOUT = 5
## CFG_WEBSEARCH_EXTERNAL_COLLECTION_SEARCH_MAXRESULTS -- how many
## results do we fetch?
CFG_WEBSEARCH_EXTERNAL_COLLECTION_SEARCH_MAXRESULTS = 10
## CFG_WEBSEARCH_SPLIT_BY_COLLECTION -- do we want to split the search
## results by collection or not? Use 0 for not, 1 for yes.
CFG_WEBSEARCH_SPLIT_BY_COLLECTION = 1
## CFG_WEBSEARCH_DEF_RECORDS_IN_GROUPS -- the default number of
## records to display per page in the search results pages.
CFG_WEBSEARCH_DEF_RECORDS_IN_GROUPS = 10
## CFG_WEBSEARCH_MAX_RECORDS_IN_GROUPS -- in order to limit denial of
## service attacks the total number of records per group displayed as a
## result of a search query will be limited to this number. Only the superuser
## queries will not be affected by this limit.
CFG_WEBSEARCH_MAX_RECORDS_IN_GROUPS = 200
## CFG_WEBSEARCH_PERMITTED_RESTRICTED_COLLECTIONS_LEVEL -- logged in users
## might have rights to access some restricted collections. This variable
## tweaks the kind of support the system will automatically provide to the
## user with respect to searching into these restricted collections.
## Set this to 0 in order to have the user to explicitly activate restricted
## collections in order to search into them. Set this to 1 in order to
## propose to the user the list of restricted collections to which he/she has
## rights (note: this is not yet implemented). Set this to 2 in order to
## silently add all the restricted collections to which the user has rights to
## to any query.
## Note: the system will discover which restricted collections a user has
## rights to, at login time. The time complexity of this procedure is
## proportional to the number of restricted collections. E.g. for a system
## with ~50 restricted collections, you might expect ~1s of delay in the
## login time, when this variable is set to a value higher than 0.
CFG_WEBSEARCH_PERMITTED_RESTRICTED_COLLECTIONS_LEVEL = 0
## CFG_WEBSEARCH_SHOW_COMMENT_COUNT -- do we want to show the 'N comments'
## links on the search engine pages? (useful only when you have allowed
## commenting)
CFG_WEBSEARCH_SHOW_COMMENT_COUNT = 1
## CFG_WEBSEARCH_SHOW_REVIEW_COUNT -- do we want to show the 'N reviews'
## links on the search engine pages? (useful only when you have allowed
## reviewing)
CFG_WEBSEARCH_SHOW_REVIEW_COUNT = 1
## CFG_WEBSEARCH_FULLTEXT_SNIPPETS -- how many full-text snippets to
## display for full-text searches?
CFG_WEBSEARCH_FULLTEXT_SNIPPETS = 4
## CFG_WEBSEARCH_FULLTEXT_SNIPPETS_WORDS -- how many context words
## to display around the pattern in the snippet?
CFG_WEBSEARCH_FULLTEXT_SNIPPETS_WORDS = 4
## CFG_WEBSEARCH_WILDCARD_LIMIT -- some of the queries, wildcard
## queries in particular (ex: cern*, a*), but also regular expressions
## (ex: [a-z]+), may take a long time to respond due to the high
## number of hits. You can limit the number of terms matched by a
## wildcard by setting this variable. A negative value or zero means
## that none of the queries will be limited (which may be wanted by
## also prone to denial-of-service kind of attacks).
CFG_WEBSEARCH_WILDCARD_LIMIT = 50000
## CFG_WEBSEARCH_SYNONYM_KBRS -- defines which knowledge bases are to
## be used for which index in order to provide runtime synonym lookup
## of user-supplied terms, and what massaging function should be used
## upon search pattern before performing the KB lookup. (Can be one
## of `exact', 'leading_to_comma', `leading_to_number'.)
CFG_WEBSEARCH_SYNONYM_KBRS = {
'journal': ['SEARCH-SYNONYM-JOURNAL', 'leading_to_number'],
}
## CFG_SOLR_URL -- optionally, you may use Solr to serve full-text
## queries. If so, please specify the URL of your Solr instance.
## (example: http://localhost:8080/sorl)
CFG_SOLR_URL =
## CFG_WEBSEARCH_PREV_NEXT_HIT_LIMIT -- specify the limit when
## the previous/next/back hit links are to be displayed on detailed record pages.
## In order to speeding up list manipulations, if a search returns lots of hits,
## more than this limit, then do not loose time calculating next/previous/back
## hits at all, but display page directly without these.
## Note also that Invenio installations that do not like
## to have the next/previous hit link functionality would be able to set this
## variable to zero and not see anything.
CFG_WEBSEARCH_PREV_NEXT_HIT_LIMIT = 1000
## CFG_WEBSEARCH_VIEWRESTRCOLL_POLICY -- when a record belongs to more than one
## restricted collection, if the viewrestcoll policy is set to "ALL" (default)
## then the user must be authorized to all the restricted collections, in
## order to be granted access to the specific record. If the policy is set to
## "ANY", then the user need to be authorized to only one of the collections
## in order to be granted access to the specific record.
CFG_WEBSEARCH_VIEWRESTRCOLL_POLICY = ALL
#######################################
## Part 4: BibHarvest OAI parameters ##
#######################################
## This part defines parameters for the Invenio OAI gateway.
## Useful if you are running Invenio as OAI data provider.
## CFG_OAI_ID_FIELD -- OAI identifier MARC field:
CFG_OAI_ID_FIELD = 909COo
## CFG_OAI_SET_FIELD -- OAI set MARC field:
CFG_OAI_SET_FIELD = 909COp
## CFG_OAI_SET_FIELD -- previous OAI set MARC field:
CFG_OAI_PREVIOUS_SET_FIELD = 909COq
## CFG_OAI_DELETED_POLICY -- OAI deletedrecordspolicy
## (no/transient/persistent):
CFG_OAI_DELETED_POLICY = persistent
## CFG_OAI_ID_PREFIX -- OAI identifier prefix:
CFG_OAI_ID_PREFIX = atlantis.cern.ch
## CFG_OAI_SAMPLE_IDENTIFIER -- OAI sample identifier:
CFG_OAI_SAMPLE_IDENTIFIER = oai:atlantis.cern.ch:123
## CFG_OAI_IDENTIFY_DESCRIPTION -- description for the OAI Identify verb:
CFG_OAI_IDENTIFY_DESCRIPTION = <description>
<eprints xmlns="http://www.openarchives.org/OAI/1.1/eprints"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.openarchives.org/OAI/1.1/eprints
http://www.openarchives.org/OAI/1.1/eprints.xsd">
<content>
<URL>http://atlantis.cern.ch/</URL>
</content>
<metadataPolicy>
<text>Free and unlimited use by anybody with obligation to refer to original record</text>
</metadataPolicy>
<dataPolicy>
<text>Full content, i.e. preprints may not be harvested by robots</text>
</dataPolicy>
<submissionPolicy>
<text>Submission restricted. Submitted documents are subject of approval by OAI repository admins.</text>
</submissionPolicy>
</eprints>
</description>
## CFG_OAI_LOAD -- OAI number of records in a response:
CFG_OAI_LOAD = 500
## CFG_OAI_EXPIRE -- OAI resumptionToken expiration time:
CFG_OAI_EXPIRE = 90000
## CFG_OAI_SLEEP -- service unavailable between two consecutive
## requests for CFG_OAI_SLEEP seconds:
CFG_OAI_SLEEP = 2
## CFG_OAI_METADATA_FORMATS -- mapping between accepted metadataPrefixes and
## the corresponding output format to use, its schema and its metadataNamespace.
CFG_OAI_METADATA_FORMATS = {
'marcxml': ('XOAIMARC', 'http://www.openarchives.org/OAI/1.1/dc.xsd', 'http://purl.org/dc/elements/1.1/'),
'oai_dc': ('XOAIDC', 'http://www.loc.gov/standards/marcxml/schema/MARC21slim.xsd', 'http://www.loc.gov/MARC21/slim'),
}
## CFG_OAI_FRIENDS -- list of OAI baseURL of friend repositories. See:
## <http://www.openarchives.org/OAI/2.0/guidelines-friends.htm>
CFG_OAI_FRIENDS = http://cdsweb.cern.ch/oai2d,http://openaire.cern.ch/oai2d,http://export.arxiv.org/oai2
## The following subfields are a completition to
## CFG_BIBUPLOAD_EXTERNAL_OAIID_TAG. If CFG_OAI_PROVENANCE_BASEURL_SUBFIELD is
## set for a record, then the corresponding field is considered has being
## harvested via OAI-PMH
## CFG_OAI_PROVENANCE_BASEURL_SUBFIELD -- baseURL of the originDescription or a
## record
CFG_OAI_PROVENANCE_BASEURL_SUBFIELD = u
## CFG_OAI_PROVENANCE_DATESTAMP_SUBFIELD -- datestamp of the originDescription
## or a record
CFG_OAI_PROVENANCE_DATESTAMP_SUBFIELD = d
## CFG_OAI_PROVENANCE_METADATANAMESPACE_SUBFIELD -- metadataNamespace of the
## originDescription or a record
CFG_OAI_PROVENANCE_METADATANAMESPACE_SUBFIELD = m
## CFG_OAI_PROVENANCE_ORIGINDESCRIPTION_SUBFIELD -- originDescription of the
## originDescription or a record
CFG_OAI_PROVENANCE_ORIGINDESCRIPTION_SUBFIELD = d
## CFG_OAI_PROVENANCE_HARVESTDATE_SUBFIELD -- harvestDate of the
## originDescription or a record
CFG_OAI_PROVENANCE_HARVESTDATE_SUBFIELD = h
## CFG_OAI_PROVENANCE_ALTERED_SUBFIELD -- altered flag of the
## originDescription or a record
CFG_OAI_PROVENANCE_ALTERED_SUBFIELD = t
## NOTE: the following parameters are experimenta
## -----------------------------------------------------------------------------
## CFG_OAI_RIGHTS_FIELD -- MARC field dedicated to storing Copyright information
CFG_OAI_RIGHTS_FIELD = 542__
## CFG_OAI_RIGHTS_HOLDER_SUBFIELD -- MARC subfield dedicated to storing the
## Copyright holder information
CFG_OAI_RIGHTS_HOLDER_SUBFIELD = d
## CFG_OAI_RIGHTS_DATE_SUBFIELD -- MARC subfield dedicated to storing the
## Copyright date information
CFG_OAI_RIGHTS_DATE_SUBFIELD = g
## CFG_OAI_RIGHTS_URI_SUBFIELD -- MARC subfield dedicated to storing the URI
## (URL or URN, more detailed statement about copyright status) information
CFG_OAI_RIGHTS_URI_SUBFIELD = u
## CFG_OAI_RIGHTS_CONTACT_SUBFIELD -- MARC subfield dedicated to storing the
## Copyright holder contact information
CFG_OAI_RIGHTS_CONTACT_SUBFIELD = e
## CFG_OAI_RIGHTS_STATEMENT_SUBFIELD -- MARC subfield dedicated to storing the
## Copyright statement as presented on the resource
CFG_OAI_RIGHTS_STATEMENT_SUBFIELD = f
## CFG_OAI_LICENSE_FIELD -- MARC field dedicated to storing terms governing
## use and reproduction (license)
CFG_OAI_LICENSE_FIELD = 540__
## CFG_OAI_LICENSE_TERMS_SUBFIELD -- MARC subfield dedicated to storing the
## Terms governing use and reproduction, e.g. CC License
CFG_OAI_LICENSE_TERMS_SUBFIELD = a
## CFG_OAI_LICENSE_PUBLISHER_SUBFIELD -- MARC subfield dedicated to storing the
## person or institution imposing the license (author, publisher)
CFG_OAI_LICENSE_PUBLISHER_SUBFIELD = b
## CFG_OAI_LICENSE_URI_SUBFIELD -- MARC subfield dedicated to storing the URI
## URI
CFG_OAI_LICENSE_URI_SUBFIELD = u
##------------------------------------------------------------------------------
##################################
## Part 5: WebSubmit parameters ##
##################################
## This section contains some configuration parameters for WebSubmit
## module. Please note that WebSubmit is mostly configured on
## run-time via its WebSubmit Admin web interface. The parameters
## below are the ones that you do not probably want to modify during
## the runtime.
## CFG_WEBSUBMIT_FILESYSTEM_BIBDOC_GROUP_LIMIT -- the fulltext
## documents are stored under "/opt/invenio/var/data/files/gX/Y"
## directories where X is 0,1,... and Y stands for bibdoc ID. Thusly
## documents Y are grouped into directories X and this variable
## indicates the maximum number of documents Y stored in each
## directory X. This limit is imposed solely for filesystem
## performance reasons in order not to have too many subdirectories in
## a given directory.
CFG_WEBSUBMIT_FILESYSTEM_BIBDOC_GROUP_LIMIT = 5000
## CFG_WEBSUBMIT_ADDITIONAL_KNOWN_FILE_EXTENSIONS -- a comma-separated
## list of document extensions not listed in Python standard mimetype
## library that should be recognized by Invenio.
CFG_WEBSUBMIT_ADDITIONAL_KNOWN_FILE_EXTENSIONS = hpg,link,lis,llb,mat,mpp,msg,docx,docm,xlsx,xlsm,xlsb,pptx,pptm,ppsx,ppsm
## CFG_BIBDOCFILE_USE_XSENDFILE -- if your web server supports
## XSendfile header, you may want to enable this feature in order for
## to Invenio tell the web server to stream files for download (after
## proper authorization checks) by web server's means. This helps to
## liberate Invenio worker processes from being busy with sending big
## files to clients. The web server will take care of that. Note:
## this feature is still somewhat experimental. Note: when enabled
## (set to 1), then you have to also regenerate Apache vhost conf
## snippets (inveniocfg --update-config-py --create-apache-conf).
CFG_BIBDOCFILE_USE_XSENDFILE = 0
## CFG_BIBDOCFILE_MD5_CHECK_PROBABILITY -- a number between 0 and
## 1 that indicates probability with which MD5 checksum will be
## verified when streaming bibdocfile-managed files. (0.1 will cause
## the check to be performed once for every 10 downloads)
CFG_BIBDOCFILE_MD5_CHECK_PROBABILITY = 0.1
## CFG_OPENOFFICE_SERVER_HOST -- the host where an OpenOffice Server is
## listening to. If localhost an OpenOffice server will be started
## automatically if it is not already running.
## Note: if you set this to an empty value this will disable the usage of
## OpenOffice for converting documents.
## If you set this to something different than localhost you'll have to take
## care to have an OpenOffice server running on the corresponding host and
## to install the same OpenOffice release both on the client and on the server
## side.
## In order to launch an OpenOffice server on a remote machine, just start
## the usual 'soffice' executable in this way:
## $> soffice -headless -nologo -nodefault -norestore -nofirststartwizard \
## .. -accept=socket,host=HOST,port=PORT;urp;StarOffice.ComponentContext
CFG_OPENOFFICE_SERVER_HOST = localhost
## CFG_OPENOFFICE_SERVER_PORT -- the port where an OpenOffice Server is
## listening to.
CFG_OPENOFFICE_SERVER_PORT = 2002
## CFG_OPENOFFICE_USER -- the user that will be used to launch the OpenOffice
## client. It is recommended to set this to a user who don't own files, like
## e.g. 'nobody'. You should also authorize your Apache server user to be
## able to become this user, e.g. by adding to your /etc/sudoers the following
## line:
## "apache ALL=(nobody) NOPASSWD: ALL"
## provided that apache is the username corresponding to the Apache user.
## On some machine this might be apache2 or www-data.
CFG_OPENOFFICE_USER = nobody
#################################
## Part 6: BibIndex parameters ##
#################################
## This section contains some configuration parameters for BibIndex
## module. Please note that BibIndex is mostly configured on run-time
## via its BibIndex Admin web interface. The parameters below are the
## ones that you do not probably want to modify very often during the
## runtime.
## CFG_BIBINDEX_FULLTEXT_INDEX_LOCAL_FILES_ONLY -- when fulltext indexing, do
## you want to index locally stored files only, or also external URLs?
## Use "0" to say "no" and "1" to say "yes".
CFG_BIBINDEX_FULLTEXT_INDEX_LOCAL_FILES_ONLY = 1
## CFG_BIBINDEX_REMOVE_STOPWORDS -- when indexing, do we want to remove
## stopwords? Use "0" to say "no" and "1" to say "yes".
CFG_BIBINDEX_REMOVE_STOPWORDS = 0
## CFG_BIBINDEX_CHARS_ALPHANUMERIC_SEPARATORS -- characters considered as
## alphanumeric separators of word-blocks inside words. You probably
## don't want to change this.
CFG_BIBINDEX_CHARS_ALPHANUMERIC_SEPARATORS = \!\"\#\$\%\&\'\(\)\*\+\,\-\.\/\:\;\<\=\>\?\@\[\\\]\^\_\`\{\|\}\~
## CFG_BIBINDEX_CHARS_PUNCTUATION -- characters considered as punctuation
## between word-blocks inside words. You probably don't want to
## change this.
CFG_BIBINDEX_CHARS_PUNCTUATION = \.\,\:\;\?\!\"
## CFG_BIBINDEX_REMOVE_HTML_MARKUP -- should we attempt to remove HTML markup
## before indexing? Use 1 if you have HTML markup inside metadata
## (e.g. in abstracts), use 0 otherwise.
CFG_BIBINDEX_REMOVE_HTML_MARKUP = 0
## CFG_BIBINDEX_REMOVE_LATEX_MARKUP -- should we attempt to remove LATEX markup
## before indexing? Use 1 if you have LATEX markup inside metadata
## (e.g. in abstracts), use 0 otherwise.
CFG_BIBINDEX_REMOVE_LATEX_MARKUP = 0
## CFG_BIBINDEX_MIN_WORD_LENGTH -- minimum word length allowed to be added to
## index. The terms smaller then this amount will be discarded.
## Useful to keep the database clean, however you can safely leave
## this value on 0 for up to 1,000,000 documents.
CFG_BIBINDEX_MIN_WORD_LENGTH = 0
## CFG_BIBINDEX_URLOPENER_USERNAME and CFG_BIBINDEX_URLOPENER_PASSWORD --
## access credentials to access restricted URLs, interesting only if
## you are fulltext-indexing files located on a remote server that is
## only available via username/password. But it's probably better to
## handle this case via IP or some convention; the current scheme is
## mostly there for demo only.
CFG_BIBINDEX_URLOPENER_USERNAME = mysuperuser
CFG_BIBINDEX_URLOPENER_PASSWORD = mysuperpass
## CFG_INTBITSET_ENABLE_SANITY_CHECKS --
## Enable sanity checks for integers passed to the intbitset data
## structures. It is good to enable this during debugging
## and to disable this value for speed improvements.
CFG_INTBITSET_ENABLE_SANITY_CHECKS = False
## CFG_BIBINDEX_PERFORM_OCR_ON_DOCNAMES -- regular expression that matches
## docnames for which OCR is desired (set this to .* in order to enable
## OCR in general, set this to empty in order to disable it.)
CFG_BIBINDEX_PERFORM_OCR_ON_DOCNAMES = scan-.*
## CFG_BIBINDEX_SPLASH_PAGES -- key-value mapping where the key corresponds
## to a regular expression that matches the URLs of the splash pages of
## a given service and the value is a regular expression of the set of URLs
## referenced via <a> tags in the HTML content of the splash pages that are
## referring to documents that need to be indexed.
## NOTE: for backward compatibility reasons you can set this to a simple
## regular expression that will directly be used as the unique key of the
## map, with corresponding value set to ".*" (in order to match any URL)
CFG_BIBINDEX_SPLASH_PAGES = {
"http://documents\.cern\.ch/setlink\?.*": ".*",
"http://ilcagenda\.linearcollider\.org/subContributionDisplay\.py\?.*|http://ilcagenda\.linearcollider\.org/contributionDisplay\.py\?.*": "http://ilcagenda\.linearcollider\.org/getFile\.py/access\?.*|http://ilcagenda\.linearcollider\.org/materialDisplay\.py\?.*",
}
## CFG_BIBINDEX_AUTHOR_WORD_INDEX_EXCLUDE_FIRST_NAMES -- do we want
## the author word index to exclude first names to keep only last
## names? If set to True, then for the author `Bernard, Denis', only
## `Bernard' will be indexed in the word index, not `Denis'. Note
## that if you change this variable, you have to re-index the author
## index via `bibindex -w author -R'.
CFG_BIBINDEX_AUTHOR_WORD_INDEX_EXCLUDE_FIRST_NAMES = False
## CFG_BIBINDEX_SYNONYM_KBRS -- defines which knowledge bases are to
## be used for which index in order to provide index-time synonym
## lookup, and what massaging function should be used upon search
## pattern before performing the KB lookup. (Can be one of `exact',
## 'leading_to_comma', `leading_to_number'.)
CFG_BIBINDEX_SYNONYM_KBRS = {
'global': ['INDEX-SYNONYM-TITLE', 'exact'],
'title': ['INDEX-SYNONYM-TITLE', 'exact'],
}
#######################################
## Part 7: Access control parameters ##
#######################################
## This section contains some configuration parameters for the access
## control system. Please note that WebAccess is mostly configured on
## run-time via its WebAccess Admin web interface. The parameters
## below are the ones that you do not probably want to modify very
## often during the runtime. (If you do want to modify them during
## runtime, for example te deny access temporarily because of backups,
## you can edit access_control_config.py directly, no need to get back
## here and no need to redo the make process.)
## CFG_ACCESS_CONTROL_LEVEL_SITE -- defines how open this site is.
## Use 0 for normal operation of the site, 1 for read-only site (all
## write operations temporarily closed), 2 for site fully closed,
## 3 for also disabling any database connection.
## Useful for site maintenance.
CFG_ACCESS_CONTROL_LEVEL_SITE = 0
## CFG_ACCESS_CONTROL_LEVEL_GUESTS -- guest users access policy. Use
## 0 to allow guest users, 1 not to allow them (all users must login).
CFG_ACCESS_CONTROL_LEVEL_GUESTS = 0
## CFG_ACCESS_CONTROL_LEVEL_ACCOUNTS -- account registration and
## activation policy. When 0, users can register and accounts are
## automatically activated. When 1, users can register but admin must
## activate the accounts. When 2, users cannot register nor update
## their email address, only admin can register accounts. When 3,
## users cannot register nor update email address nor password, only
## admin can register accounts. When 4, the same as 3 applies, nor
## user cannot change his login method. When 5, then the same as 4
## applies, plus info about how to get an account is hidden from the
## login page.
CFG_ACCESS_CONTROL_LEVEL_ACCOUNTS = 0
## CFG_ACCESS_CONTROL_LIMIT_REGISTRATION_TO_DOMAIN -- limit account
## registration to certain email addresses? If wanted, give domain
## name below, e.g. "cern.ch". If not wanted, leave it empty.
CFG_ACCESS_CONTROL_LIMIT_REGISTRATION_TO_DOMAIN =
## CFG_ACCESS_CONTROL_NOTIFY_ADMIN_ABOUT_NEW_ACCOUNTS -- send a
## notification email to the administrator when a new account is
## created? Use 0 for no, 1 for yes.
CFG_ACCESS_CONTROL_NOTIFY_ADMIN_ABOUT_NEW_ACCOUNTS = 0
## CFG_ACCESS_CONTROL_NOTIFY_USER_ABOUT_NEW_ACCOUNT -- send a
## notification email to the user when a new account is created in order to
## to verify the validity of the provided email address? Use
## 0 for no, 1 for yes.
CFG_ACCESS_CONTROL_NOTIFY_USER_ABOUT_NEW_ACCOUNT = 1
## CFG_ACCESS_CONTROL_NOTIFY_USER_ABOUT_ACTIVATION -- send a
## notification email to the user when a new account is activated?
## Use 0 for no, 1 for yes.
CFG_ACCESS_CONTROL_NOTIFY_USER_ABOUT_ACTIVATION = 0
## CFG_ACCESS_CONTROL_NOTIFY_USER_ABOUT_DELETION -- send a
## notification email to the user when a new account is deleted or
## account demand rejected? Use 0 for no, 1 for yes.
CFG_ACCESS_CONTROL_NOTIFY_USER_ABOUT_DELETION = 0
## CFG_APACHE_PASSWORD_FILE -- the file where Apache user credentials
## are stored. Must be an absolute pathname. If the value does not
## start by a slash, it is considered to be the filename of a file
## located under prefix/var/tmp directory. This is useful for the
## demo site testing purposes. For the production site, if you plan
## to restrict access to some collections based on the Apache user
## authentication mechanism, you should put here an absolute path to
## your Apache password file.
CFG_APACHE_PASSWORD_FILE = demo-site-apache-user-passwords
## CFG_APACHE_GROUP_FILE -- the file where Apache user groups are
## defined. See the documentation of the preceding config variable.
CFG_APACHE_GROUP_FILE = demo-site-apache-user-groups
###################################
## Part 8: WebSession parameters ##
###################################
## This section contains some configuration parameters for tweaking
## session handling.
## CFG_WEBSESSION_EXPIRY_LIMIT_DEFAULT -- number of days after which a session
## and the corresponding cookie is considered expired.
CFG_WEBSESSION_EXPIRY_LIMIT_DEFAULT = 2
## CFG_WEBSESSION_EXPIRY_LIMIT_REMEMBER -- number of days after which a session
## and the corresponding cookie is considered expired, when the user has
## requested to permanently stay logged in.
CFG_WEBSESSION_EXPIRY_LIMIT_REMEMBER = 365
## CFG_WEBSESSION_RESET_PASSWORD_EXPIRE_IN_DAYS -- when user requested
## a password reset, for how many days is the URL valid?
CFG_WEBSESSION_RESET_PASSWORD_EXPIRE_IN_DAYS = 3
## CFG_WEBSESSION_ADDRESS_ACTIVATION_EXPIRE_IN_DAYS -- when an account
## activation email was sent, for how many days is the URL valid?
CFG_WEBSESSION_ADDRESS_ACTIVATION_EXPIRE_IN_DAYS = 3
## CFG_WEBSESSION_NOT_CONFIRMED_EMAIL_ADDRESS_EXPIRE_IN_DAYS -- when
## user won't confirm his email address and not complete
## registeration, after how many days will it expire?
CFG_WEBSESSION_NOT_CONFIRMED_EMAIL_ADDRESS_EXPIRE_IN_DAYS = 10
## CFG_WEBSESSION_DIFFERENTIATE_BETWEEN_GUESTS -- when set to 1, the session
## system allocates the same uid=0 to all guests users regardless of where they
## come from. 0 allocate a unique uid to each guest.
CFG_WEBSESSION_DIFFERENTIATE_BETWEEN_GUESTS = 0
################################
## Part 9: BibRank parameters ##
################################
## This section contains some configuration parameters for the ranking
## system.
## CFG_BIBRANK_SHOW_READING_STATS -- do we want to show reading
## similarity stats? ('People who viewed this page also viewed')
CFG_BIBRANK_SHOW_READING_STATS = 1
## CFG_BIBRANK_SHOW_DOWNLOAD_STATS -- do we want to show the download
## similarity stats? ('People who downloaded this document also
## downloaded')
CFG_BIBRANK_SHOW_DOWNLOAD_STATS = 1
## CFG_BIBRANK_SHOW_DOWNLOAD_GRAPHS -- do we want to show download
## history graph? (0=no | 1=classic/gnuplot | 2=flot)
CFG_BIBRANK_SHOW_DOWNLOAD_GRAPHS = 1
## CFG_BIBRANK_SHOW_DOWNLOAD_GRAPHS_CLIENT_IP_DISTRIBUTION -- do we
## want to show a graph representing the distribution of client IPs
## downloading given document? (0=no | 1=classic/gnuplot | 2=flot)
CFG_BIBRANK_SHOW_DOWNLOAD_GRAPHS_CLIENT_IP_DISTRIBUTION = 0
## CFG_BIBRANK_SHOW_CITATION_LINKS -- do we want to show the 'Cited
## by' links? (useful only when you have citations in the metadata)
CFG_BIBRANK_SHOW_CITATION_LINKS = 1
## CFG_BIBRANK_SHOW_CITATION_STATS -- de we want to show citation
## stats? ('Cited by M recors', 'Co-cited with N records')
CFG_BIBRANK_SHOW_CITATION_STATS = 1
## CFG_BIBRANK_SHOW_CITATION_GRAPHS -- do we want to show citation
## history graph? (0=no | 1=classic/gnuplot | 2=flot)
CFG_BIBRANK_SHOW_CITATION_GRAPHS = 1
####################################
## Part 10: WebComment parameters ##
####################################
## This section contains some configuration parameters for the
## commenting and reviewing facilities.
## CFG_WEBCOMMENT_ALLOW_COMMENTS -- do we want to allow users write
## public comments on records?
CFG_WEBCOMMENT_ALLOW_COMMENTS = 1
## CFG_WEBCOMMENT_ALLOW_REVIEWS -- do we want to allow users write
## public reviews of records?
CFG_WEBCOMMENT_ALLOW_REVIEWS = 1
## CFG_WEBCOMMENT_ALLOW_SHORT_REVIEWS -- do we want to allow short
## reviews, that is just the attribution of stars without submitting
## detailed review text?
CFG_WEBCOMMENT_ALLOW_SHORT_REVIEWS = 0
## CFG_WEBCOMMENT_NB_REPORTS_BEFORE_SEND_EMAIL_TO_ADMIN -- if users
## report a comment to be abusive, how many they have to be before the
## site admin is alerted?
CFG_WEBCOMMENT_NB_REPORTS_BEFORE_SEND_EMAIL_TO_ADMIN = 5
## CFG_WEBCOMMENT_NB_COMMENTS_IN_DETAILED_VIEW -- how many comments do
## we display in the detailed record page upon welcome?
CFG_WEBCOMMENT_NB_COMMENTS_IN_DETAILED_VIEW = 1
## CFG_WEBCOMMENT_NB_REVIEWS_IN_DETAILED_VIEW -- how many reviews do
## we display in the detailed record page upon welcome?
CFG_WEBCOMMENT_NB_REVIEWS_IN_DETAILED_VIEW = 1
## CFG_WEBCOMMENT_ADMIN_NOTIFICATION_LEVEL -- do we notify the site
## admin after every comment?
CFG_WEBCOMMENT_ADMIN_NOTIFICATION_LEVEL = 1
## CFG_WEBCOMMENT_TIMELIMIT_PROCESSING_COMMENTS_IN_SECONDS -- how many
## elapsed seconds do we consider enough when checking for possible
## multiple comment submissions by a user?
CFG_WEBCOMMENT_TIMELIMIT_PROCESSING_COMMENTS_IN_SECONDS = 20
## CFG_WEBCOMMENT_TIMELIMIT_PROCESSING_REVIEWS_IN_SECONDS -- how many
## elapsed seconds do we consider enough when checking for possible
## multiple review submissions by a user?
CFG_WEBCOMMENT_TIMELIMIT_PROCESSING_REVIEWS_IN_SECONDS = 20
## CFG_WEBCOMMENT_USE_RICH_EDITOR -- enable the WYSIWYG
## Javascript-based editor when user edits comments?
CFG_WEBCOMMENT_USE_RICH_TEXT_EDITOR = False
## CFG_WEBCOMMENT_ALERT_ENGINE_EMAIL -- the email address from which the
## alert emails will appear to be sent:
CFG_WEBCOMMENT_ALERT_ENGINE_EMAIL = info@invenio-software.org
## CFG_WEBCOMMENT_DEFAULT_MODERATOR -- if no rules are
## specified to indicate who is the comment moderator of
## a collection, this person will be used as default
CFG_WEBCOMMENT_DEFAULT_MODERATOR = info@invenio-software.org
## CFG_WEBCOMMENT_USE_MATHJAX_IN_COMMENTS -- do we want to allow the use
## of MathJax plugin to render latex input in comments?
CFG_WEBCOMMENT_USE_MATHJAX_IN_COMMENTS = 1
## CFG_WEBCOMMENT_AUTHOR_DELETE_COMMENT_OPTION -- allow comment author to
## delete its own comment?
CFG_WEBCOMMENT_AUTHOR_DELETE_COMMENT_OPTION = 1
# CFG_WEBCOMMENT_EMAIL_REPLIES_TO -- which field of the record define
# email addresses that should be notified of newly submitted comments,
# and for which collection. Use collection names as keys, and list of
# tags as values
CFG_WEBCOMMENT_EMAIL_REPLIES_TO = {
'Articles': ['506__d', '506__m'],
}
# CFG_WEBCOMMENT_RESTRICTION_DATAFIELD -- which field of the record
# define the restriction (must be linked to WebAccess
# 'viewrestrcomment') to apply to newly submitted comments, and for
# which collection. Use collection names as keys, and one tag as value
CFG_WEBCOMMENT_RESTRICTION_DATAFIELD = {
'Articles': '5061_a',
'Pictures': '5061_a',
'Theses': '5061_a',
}
# CFG_WEBCOMMENT_ROUND_DATAFIELD -- which field of the record define
# the current round of comment for which collection. Use collection
# name as key, and one tag as value
CFG_WEBCOMMENT_ROUND_DATAFIELD = {
'Articles': '562__c',
'Pictures': '562__c',
}
# CFG_WEBCOMMENT_MAX_ATTACHMENT_SIZE -- max file size per attached
# file, in bytes. Choose 0 if you don't want to limit the size
CFG_WEBCOMMENT_MAX_ATTACHMENT_SIZE = 5242880
# CFG_WEBCOMMENT_MAX_ATTACHED_FILES -- maxium number of files that can
# be attached per comment. Choose 0 if you don't want to limit the
# number of files. File uploads can be restricted with action
# "attachcommentfile".
CFG_WEBCOMMENT_MAX_ATTACHED_FILES = 5
# CFG_WEBCOMMENT_MAX_COMMENT_THREAD_DEPTH -- how many levels of
# indentation discussions can be. This can be used to ensure that
# discussions will not go into deep levels of nesting if users don't
# understand the difference between "reply to comment" and "add
# comment". When the depth is reached, any "reply to comment" is
# conceptually converted to a "reply to thread" (i.e. reply to this
# parent's comment). Use -1 for no limit, 0 for unthreaded (flat)
# discussions.
CFG_WEBCOMMENT_MAX_COMMENT_THREAD_DEPTH = 1
##################################
## Part 11: BibSched parameters ##
##################################
## This section contains some configuration parameters for the
## bibliographic task scheduler.
## CFG_BIBSCHED_REFRESHTIME -- how often do we want to refresh
## bibsched monitor? (in seconds)
CFG_BIBSCHED_REFRESHTIME = 5
## CFG_BIBSCHED_LOG_PAGER -- what pager to use to view bibsched task
## logs?
CFG_BIBSCHED_LOG_PAGER = /bin/more
## CFG_BIBSCHED_GC_TASKS_OLDER_THAN -- after how many days to perform the
## gargbage collector of BibSched queue (i.e. removing/moving task to archive).
CFG_BIBSCHED_GC_TASKS_OLDER_THAN = 30
## CFG_BIBSCHED_GC_TASKS_TO_REMOVE -- list of BibTask that can be safely
## removed from the BibSched queue once they are DONE.
CFG_BIBSCHED_GC_TASKS_TO_REMOVE = bibindex,bibreformat,webcoll,bibrank,inveniogc
## CFG_BIBSCHED_GC_TASKS_TO_ARCHIVE -- list of BibTasks that should be safely
## archived out of the BibSched queue once they are DONE.
CFG_BIBSCHED_GC_TASKS_TO_ARCHIVE = bibupload,oaiarchive
## CFG_BIBSCHED_MAX_NUMBER_CONCURRENT_TASKS -- maximum number of BibTasks
## that can run concurrently.
## NOTE: concurrent tasks are still considered as an experimental
## feature. Please keep this value set to 1 on production environments.
CFG_BIBSCHED_MAX_NUMBER_CONCURRENT_TASKS = 1
## CFG_BIBSCHED_PROCESS_USER -- bibsched and bibtask processes must
## usually run under the same identity as the Apache web server
## process in order to share proper file read/write privileges. If
## you want to force some other bibsched/bibtask user, e.g. because
## you are using a local `invenio' user that belongs to your
## `www-data' Apache user group and so shares writing rights with your
## Apache web server process in this way, then please set its username
## identity here. Otherwise we shall check whether your
## bibsched/bibtask processes are run under the same identity as your
## Apache web server process (in which case you can leave the default
## empty value here).
CFG_BIBSCHED_PROCESS_USER =
## CFG_BIBSCHED_NODE_TASKS -- specific nodes may be configured to
## run only specific tasks; if you want this, then this variable is a
## dictionary of the form {'hostname1': ['task1', 'task2']}. The
## default is that any node can run any task.
CFG_BIBSCHED_NODE_TASKS = {}
###################################
## Part 12: WebBasket parameters ##
###################################
## CFG_WEBBASKET_MAX_NUMBER_OF_DISPLAYED_BASKETS -- a safety limit for
## a maximum number of displayed baskets
CFG_WEBBASKET_MAX_NUMBER_OF_DISPLAYED_BASKETS = 20
## CFG_WEBBASKET_USE_RICH_TEXT_EDITOR -- enable the WYSIWYG
## Javascript-based editor when user edits comments in WebBasket?
CFG_WEBBASKET_USE_RICH_TEXT_EDITOR = False
##################################
## Part 13: WebAlert parameters ##
##################################
## This section contains some configuration parameters for the
## automatic email notification alert system.
## CFG_WEBALERT_ALERT_ENGINE_EMAIL -- the email address from which the
## alert emails will appear to be sent:
CFG_WEBALERT_ALERT_ENGINE_EMAIL = info@invenio-software.org
## CFG_WEBALERT_MAX_NUM_OF_RECORDS_IN_ALERT_EMAIL -- how many records
## at most do we send in an outgoing alert email?
CFG_WEBALERT_MAX_NUM_OF_RECORDS_IN_ALERT_EMAIL = 20
## CFG_WEBALERT_MAX_NUM_OF_CHARS_PER_LINE_IN_ALERT_EMAIL -- number of
## chars per line in an outgoing alert email?
CFG_WEBALERT_MAX_NUM_OF_CHARS_PER_LINE_IN_ALERT_EMAIL = 72
## CFG_WEBALERT_SEND_EMAIL_NUMBER_OF_TRIES -- when sending alert
## emails fails, how many times we retry?
CFG_WEBALERT_SEND_EMAIL_NUMBER_OF_TRIES = 3
## CFG_WEBALERT_SEND_EMAIL_SLEEPTIME_BETWEEN_TRIES -- when sending
## alert emails fails, what is the sleeptime between tries? (in
## seconds)
CFG_WEBALERT_SEND_EMAIL_SLEEPTIME_BETWEEN_TRIES = 300
####################################
## Part 14: WebMessage parameters ##
####################################
## CFG_WEBMESSAGE_MAX_SIZE_OF_MESSAGE -- how large web messages do we
## allow?
CFG_WEBMESSAGE_MAX_SIZE_OF_MESSAGE = 20000
## CFG_WEBMESSAGE_MAX_NB_OF_MESSAGES -- how many messages for a
## regular user do we allow in its inbox?
CFG_WEBMESSAGE_MAX_NB_OF_MESSAGES = 30
## CFG_WEBMESSAGE_DAYS_BEFORE_DELETE_ORPHANS -- how many days before
## we delete orphaned messages?
CFG_WEBMESSAGE_DAYS_BEFORE_DELETE_ORPHANS = 60
##################################
## Part 15: MiscUtil parameters ##
##################################
## CFG_MISCUTIL_SQL_USE_SQLALCHEMY -- whether to use SQLAlchemy.pool
## in the DB engine of Invenio. It is okay to enable this flag
## even if you have not installed SQLAlchemy. Note that Invenio will
## loose some perfomance if this option is enabled.
CFG_MISCUTIL_SQL_USE_SQLALCHEMY = False
## CFG_MISCUTIL_SQL_RUN_SQL_MANY_LIMIT -- how many queries can we run
## inside run_sql_many() in one SQL statement? The limit value
## depends on MySQL's max_allowed_packet configuration.
CFG_MISCUTIL_SQL_RUN_SQL_MANY_LIMIT = 10000
## CFG_MISCUTIL_SMTP_HOST -- which server to use as outgoing mail server to
## send outgoing emails generated by the system, for example concerning
## submissions or email notification alerts.
CFG_MISCUTIL_SMTP_HOST = localhost
## CFG_MISCUTIL_SMTP_PORT -- which port to use on the outgoing mail server
## defined in the previous step.
CFG_MISCUTIL_SMTP_PORT = 25
## CFG_MISCUTILS_DEFAULT_PROCESS_TIMEOUT -- the default number of seconds after
## which a process launched trough shellutils.run_process_with_timeout will
## be killed. This is useful to catch runaway processes.
CFG_MISCUTIL_DEFAULT_PROCESS_TIMEOUT = 300
## CFG_MATHJAX_HOSTING -- if you plan to use MathJax to display TeX
## formulas on HTML web pages, you can specify whether you wish to use
## 'local' hosting or 'cdn' hosting of MathJax libraries. (If set to
## 'local', you have to run 'make install-mathjax-plugin' as described
## in the INSTALL guide.) If set to 'local', users will use your site
## to download MathJax sources. If set to 'cdn', users will use
## centralized MathJax CDN servers instead. Please note that using
## CDN is suitable only for small institutions or for MathJax
## sponsors; see the MathJax website for more details. (Also, please
## note that if you plan to use MathJax on your site, you have to
## adapt CFG_WEBSEARCH_USE_MATHJAX_FOR_FORMATS and
## CFG_WEBCOMMENT_USE_MATHJAX_IN_COMMENTS configuration variables
## elsewhere in this file.)
CFG_MATHJAX_HOSTING = local
#################################
## Part 16: BibEdit parameters ##
#################################
## CFG_BIBEDIT_TIMEOUT -- when a user edits a record, this record is
## locked to prevent other users to edit it at the same time.
## How many seconds of inactivity before the locked record again will be free
## for other people to edit?
CFG_BIBEDIT_TIMEOUT = 3600
## CFG_BIBEDIT_LOCKLEVEL -- when a user tries to edit a record which there
## is a pending bibupload task for in the queue, this shouldn't be permitted.
## The lock level determines how thouroughly the queue should be investigated
## to determine if this is the case.
## Level 0 - always permits editing, doesn't look at the queue
## (unsafe, use only if you know what you are doing)
## Level 1 - permits editing if there are no queued bibedit tasks for this record
## (safe with respect to bibedit, but not for other bibupload maintenance jobs)
## Level 2 - permits editing if there are no queued bibupload tasks of any sort
## (safe, but may lock more than necessary if many cataloguers around)
## Level 3 - permits editing if no queued bibupload task concerns given record
## (safe, most precise locking, but slow,
## checks for 001/EXTERNAL_SYSNO_TAG/EXTERNAL_OAIID_TAG)
## The recommended level is 3 (default) or 2 (if you use maintenance jobs often).
CFG_BIBEDIT_LOCKLEVEL = 3
## CFG_BIBEDIT_PROTECTED_FIELDS -- a comma-separated list of fields that BibEdit
## will not allow to be added, edited or deleted. Wildcards are not supported,
## but conceptually a wildcard is added at the end of every field specification.
## Examples:
## 500A - protect all MARC fields with tag 500 and first indicator A
## 5 - protect all MARC fields in the 500-series.
## 909C_a - protect subfield a in tag 909 with first indicator C and empty
## second indicator
## Note that 001 is protected by default, but if protection of other
## identifiers or automated fields is a requirement, they should be added to
## this list.
CFG_BIBEDIT_PROTECTED_FIELDS =
## CFG_BIBEDIT_QUEUE_CHECK_METHOD -- how do we want to check for
## possible queue locking situations to prevent cataloguers from
## editing a record that may be waiting in the queue? Use 'bibrecord'
## for exact checking (always works, but may be slow), use 'regexp'
## for regular expression based checking (very fast, but may be
## inaccurate). When unsure, use 'bibrecord'.
CFG_BIBEDIT_QUEUE_CHECK_METHOD = bibrecord
## CFG_BIBEDIT_EXTEND_RECORD_WITH_COLLECTION_TEMPLATE -- a dictionary
## containing which collections will be extended with a given template
## while being displayed in BibEdit UI.
CFG_BIBEDIT_EXTEND_RECORD_WITH_COLLECTION_TEMPLATE = { 'Poetry' : 'poem'}
## CFG_BIBEDITMULTI_LIMIT_INSTANT_PROCESSING -- maximum number of records
## that can be modified instantly using the multi-record editor. Above
## this limit, modifications will only be executed in limited hours.
CFG_BIBEDITMULTI_LIMIT_INSTANT_PROCESSING = 2000
## CFG_BIBEDITMULTI_LIMIT_DELAYED_PROCESSING -- maximum number of records
## that can be send for modification without having a superadmin role.
## If the number of records is between CFG_BIBEDITMULTI_LIMIT_INSTANT_PROCESSING
## and this number, the modifications will take place only in limited hours.
CFG_BIBEDITMULTI_LIMIT_DELAYED_PROCESSING = 20000
## CFG_BIBEDITMULTI_LIMIT_DELAYED_PROCESSING_TIME -- Allowed time to
## execute modifications on records, when the number exceeds
## CFG_BIBEDITMULTI_LIMIT_INSTANT_PROCESSING.
CFG_BIBEDITMULTI_LIMIT_DELAYED_PROCESSING_TIME = 22:00-05:00
## CFG_BIBEDIT_KB_SUBJECTS - Name of the KB used in the field 65017a
## to automatically convert codes into extended version. e.g
## a - Astrophysics
CFG_BIBEDIT_KB_SUBJECTS = Subjects
## CFG_BIBEDIT_KB_INSTITUTIONS - Name of the KB used for institution
## autocomplete. To be applied in fields defined in
## CFG_BIBEDIT_AUTOCOMPLETE_INSTITUTIONS_FIELDS
CFG_BIBEDIT_KB_INSTITUTIONS = InstitutionsCollection
###################################
## Part 17: BibUpload parameters ##
###################################
## CFG_BIBUPLOAD_REFERENCE_TAG -- where do we store references?
CFG_BIBUPLOAD_REFERENCE_TAG = 999
## CFG_BIBUPLOAD_EXTERNAL_SYSNO_TAG -- where do we store external
## system numbers? Useful for matching when our records come from an
## external digital library system.
CFG_BIBUPLOAD_EXTERNAL_SYSNO_TAG = 970__a
## CFG_BIBUPLOAD_EXTERNAL_OAIID_TAG -- where do we store OAI ID tags
## of harvested records? Useful for matching when we harvest stuff
## via OAI that we do not want to reexport via Invenio OAI; so records
## may have only the source OAI ID stored in this tag (kind of like
## external system number too).
CFG_BIBUPLOAD_EXTERNAL_OAIID_TAG = 035__a
## CFG_BIBUPLOAD_EXTERNAL_OAIID_PROVENANCE_TAG -- where do we store OAI SRC
## tags of harvested records? Useful for matching when we harvest stuff
## via OAI that we do not want to reexport via Invenio OAI; so records
## may have only the source OAI SRC stored in this tag (kind of like
## external system number too). Note that the field should be the same of
## CFG_BIBUPLOAD_EXTERNAL_OAIID_TAG.
CFG_BIBUPLOAD_EXTERNAL_OAIID_PROVENANCE_TAG = 035__9
## CFG_BIBUPLOAD_STRONG_TAGS -- a comma-separated list of tags that
## are strong enough to resist the replace mode. Useful for tags that
## might be created from an external non-metadata-like source,
## e.g. the information about the number of copies left.
CFG_BIBUPLOAD_STRONG_TAGS = 964
## CFG_BIBUPLOAD_CONTROLLED_PROVENANCE_TAGS -- a comma-separated list
## of tags that contain provenance information that should be checked
## in the bibupload correct mode via matching provenance codes. (Only
## field instances of the same provenance information would be acted
## upon.) Please specify the whole tag info up to subfield codes.
CFG_BIBUPLOAD_CONTROLLED_PROVENANCE_TAGS = 6531_9
## CFG_BIBUPLOAD_FFT_ALLOWED_LOCAL_PATHS -- a comma-separated list of system
## paths from which it is allowed to take fulltextes that will be uploaded via
## FFT (CFG_TMPDIR is included by default).
CFG_BIBUPLOAD_FFT_ALLOWED_LOCAL_PATHS = /tmp,/home
## CFG_BIBUPLOAD_FFT_ALLOWED_EXTERNAL_URLS -- a dictionary containing external
## URLs that can be accessed by Invenio and specific HTTP headers that will be
## used for each URL.
## The keys of the dictionary are regular expressions matching a set of URLs,
## the values are dictionaries of headers as consumed by urllib2.Request. If a
## regular expression matching all URLs is created at the end of the list, it
## means that Invenio will download all URLs. Otherwise Invenio will just
## download authorized URLs.
## CFG_BIBUPLOAD_FFT_ALLOWED_EXTERNAL_URLS = [
## ('http://myurl.com/.*', {'User-Agent': 'Me'}),
## ('http://yoururl.com/.*', {'User-Agent': 'You', 'Accept': 'text/plain'}),
## ('http://.*', {'User-Agent': 'Invenio'}),
## ]
CFG_BIBUPLOAD_FFT_ALLOWED_EXTERNAL_URLS = [
('http(s)?://.*', {'User-Agent': 'Invenio'}),
]
## CFG_BIBUPLOAD_SERIALIZE_RECORD_STRUCTURE -- do we want to serialize
## internal representation of records (Pythonic record structure) into
## the database? This can improve internal processing speed of some
## operations at the price of somewhat bigger disk space usage.
## If you change this value after some records have already been added
## to your installation, you may want to run:
## $ /opt/invenio/bin/inveniocfg --reset-recstruct-cache
## in order to either erase the cache thus freeing database space,
## or to fill the cache for all records that have not been cached yet.
CFG_BIBUPLOAD_SERIALIZE_RECORD_STRUCTURE = 1
## CFG_BATCHUPLOADER_FILENAME_MATCHING_POLICY -- a comma-separated list
## indicating which fields match the file names of the documents to be
## uploaded.
## The matching will be done in the same order as the list provided.
CFG_BATCHUPLOADER_FILENAME_MATCHING_POLICY = reportnumber,recid
## CFG_BATCHUPLOADER_DAEMON_DIR -- Directory where the batchuploader daemon
## will look for the subfolders metadata and document by default.
## If path is relative, CFG_PREFIX will be joined as a prefix
CFG_BATCHUPLOADER_DAEMON_DIR = var/batchupload
## CFG_BATCHUPLOADER_WEB_ROBOT_AGENT -- Comma-separated list to specify the
## agents permitted when calling batch uploader web interface
## cdsweb.cern.ch/batchuploader/robotupload
## if using a curl, eg: curl xxx -A invenio_webupload
CFG_BATCHUPLOADER_WEB_ROBOT_AGENT = invenio_webupload
## CFG_BATCHUPLOADER_WEB_ROBOT_RIGHTS -- Access list specifying for each
## IP address, which collections are allowed using batch uploader robot
## interface.
CFG_BATCHUPLOADER_WEB_ROBOT_RIGHTS = {
'10.0.0.1': ['BOOK', 'REPORT'], # Example 1
'10.0.0.2': ['POETRY', 'PREPRINT'], # Example 2
}
####################################
## Part 18: BibCatalog parameters ##
####################################
## CFG_BIBCATALOG_SYSTEM -- set desired catalog system. For example, RT.
CFG_BIBCATALOG_SYSTEM =
## RT CONFIGURATION
## CFG_BIBCATALOG_SYSTEM_RT_CLI -- path to the RT CLI client
CFG_BIBCATALOG_SYSTEM_RT_CLI = /usr/bin/rt
## CFG_BIBCATALOG_SYSTEM_RT_URL -- Base URL of the remote RT system
CFG_BIBCATALOG_SYSTEM_RT_URL = http://localhost/rt3
## CFG_BIBCATALOG_SYSTEM_RT_DEFAULT_USER -- Set the username for a default RT account
## on remote system, with limited privileges, in order to only create and modify own tickets.
CFG_BIBCATALOG_SYSTEM_RT_DEFAULT_USER =
## CFG_BIBCATALOG_SYSTEM_RT_DEFAULT_PWD -- Set the password for the default RT account
## on remote system.
CFG_BIBCATALOG_SYSTEM_RT_DEFAULT_PWD =
####################################
## Part 19: BibFormat parameters ##
####################################
## CFG_BIBFORMAT_HIDDEN_TAGS -- comma-separated list of MARC tags that
## are not shown to users not having cataloging authorizations.
CFG_BIBFORMAT_HIDDEN_TAGS = 595
## CFG_BIBFORMAT_ADDTHIS_ID -- if you want to use the AddThis service from
## <http://www.addthis.com/>, set this value to the pubid parameter as
## provided by the service (e.g. ra-4ff80aae118f4dad), and add a call to
## <BFE_ADDTHIS /> formatting element in your formats, for example
## Default_HTML_detailed.bft.
CFG_BIBFORMAT_ADDTHIS_ID =
####################################
## Part 20: BibMatch parameters ##
####################################
## CFG_BIBMATCH_LOCAL_SLEEPTIME -- Determines the amount of seconds to sleep
## between search queries on LOCAL system.
CFG_BIBMATCH_LOCAL_SLEEPTIME = 0.0
## CFG_BIBMATCH_REMOTE_SLEEPTIME -- Determines the amount of seconds to sleep
## between search queries on REMOTE systems.
CFG_BIBMATCH_REMOTE_SLEEPTIME = 2.0
## CFG_BIBMATCH_FUZZY_WORDLIMITS -- Determines the amount of words to extract
## from a certain fields value during fuzzy matching mode. Add/change field
## and appropriate number to the dictionary to configure this.
CFG_BIBMATCH_FUZZY_WORDLIMITS = {
'100__a': 2,
'245__a': 4
}
## CFG_BIBMATCH_FUZZY_EMPTY_RESULT_LIMIT -- Determines the amount of empty results
## to accept during fuzzy matching mode.
CFG_BIBMATCH_FUZZY_EMPTY_RESULT_LIMIT = 1
## CFG_BIBMATCH_QUERY_TEMPLATES -- Here you can set the various predefined querystrings
## used to standardize common matching queries. By default the following templates
## are given:
## title - standard title search. Taken from 245__a (default)
## title-author - title and author search (i.e. this is a title AND author a)
## Taken from 245__a and 100__a
## reportnumber - reportnumber search (i.e. reportnumber:REP-NO-123).
CFG_BIBMATCH_QUERY_TEMPLATES = {
'title' : '[title]',
'title-author' : '[title] [author]',
'reportnumber' : 'reportnumber:[reportnumber]'
}
## CFG_BIBMATCH_MATCH_VALIDATION_RULESETS -- Here you can define the various rulesets for
## validating search results done by BibMatch. Each ruleset contains a certain pattern mapped
## to a tuple defining a "matching-strategy".
##
## The rule-definitions must come in two parts:
##
## * The first part is a string containing a regular expression
## that is matched against the textmarc representation of each record.
## If a match is found, the final rule-set is updated with
## the given "sub rule-set", where identical tag rules are replaced.
##
## * The second item is a list of key->value mappings (dict) that indicates specific
## strategy parameters with corresponding validation rules.
##
## This strategy consists of five items:
##
## * MARC TAGS:
## These MARC tags represents the fields taken from original record and any records from search
## results. When several MARC tags are specified with a given match-strategy, all the fields
## associated with these tags are matched together (i.e. with key "100__a,700__a", all 100__a
## and 700__a fields are matched together. Which is useful when first-author can vary for
## certain records on different systems).
##
## * COMPARISON THRESHOLD:
## a value between 0.0 and 1.0 specifying the threshold for string matches
## to determine if it is a match or not (using normalized string-distance).
## Normally 0.8 (80% match) is considered to be a close match.
##
## * COMPARISON MODE:
## the parse mode decides how the record datafields are compared:
## - 'strict' : all (sub-)fields are compared, and all must match. Order is significant.
## - 'normal' : all (sub-)fields are compared, and all must match. Order is ignored.
## - 'lazy' : all (sub-)fields are compared with each other and at least one must match
## - 'ignored': the tag is ignored in the match. Used to disable previously defined rules.
##
## * MATCHING MODE:
## the comparison mode decides how the fieldvalues are matched:
## - 'title' : uses a method specialized for comparing titles, e.g. looking for subtitles
## - 'author' : uses a special authorname comparison. Will take initials into account.
## - 'identifier' : special matching for identifiers, stripping away punctuation
## - 'date': matches dates by extracting and comparing the year
## - 'normal': normal string comparison.
## Note: Fields are considered matching when all its subfields or values match.
##
## * RESULT MODE:
## the result mode decides how the results from the comparisons are handled further:
## - 'normal' : a failed match will cause the validation to immediately exit as a failure.
## a successful match will cause the validation to continue on other rules (if any)
## - 'final' : a failed match will cause the validation to immediately exit as a failure.
## a successful match will cause validation to immediately exit as a success.
## - 'joker' : a failed match will cause the validation to continue on other rules (if any).
## a successful match will cause validation to immediately exit as a success.
##
## You can add your own rulesets in the dictionary below. The 'default' ruleset is always applied,
## and should therefore NOT be removed, but can be changed. The tag-rules can also be overwritten
## by other rulesets.
##
## WARNING: Beware that the validation quality is only as good as given rules, so matching results
## are never guaranteed to be accurate, as it is very content-specific.
CFG_BIBMATCH_MATCH_VALIDATION_RULESETS = [('default', [{ 'tags' : '245__%,242__%',
'threshold' : 0.8,
'compare_mode' : 'lazy',
'match_mode' : 'title',
'result_mode' : 'normal' },
{ 'tags' : '037__a,088__a',
'threshold' : 1.0,
'compare_mode' : 'lazy',
'match_mode' : 'identifier',
'result_mode' : 'final' },
{ 'tags' : '100__a,700__a',
'threshold' : 0.8,
'compare_mode' : 'normal',
'match_mode' : 'author',
'result_mode' : 'normal' },
{ 'tags' : '773__a',
'threshold' : 1.0,
'compare_mode' : 'lazy',
'match_mode' : 'title',
'result_mode' : 'normal' }]),
('980__ \$\$a(THESIS|Thesis)', [{ 'tags' : '100__a',
'threshold' : 0.8,
'compare_mode' : 'strict',
'match_mode' : 'author',
'result_mode' : 'normal' },
{ 'tags' : '700__a,701__a',
'threshold' : 1.0,
'compare_mode' : 'lazy',
'match_mode' : 'author',
'result_mode' : 'normal' },
{ 'tags' : '100__a,700__a',
'threshold' : 0.8,
'compare_mode' : 'ignored',
'match_mode' : 'author',
'result_mode' : 'normal' }]),
('260__', [{ 'tags' : '260__c',
'threshold' : 0.8,
'compare_mode' : 'lazy',
'match_mode' : 'date',
'result_mode' : 'normal' }]),
('0247_', [{ 'tags' : '0247_a',
'threshold' : 1.0,
'compare_mode' : 'lazy',
'match_mode' : 'identifier',
'result_mode' : 'final' }]),
('020__', [{ 'tags' : '020__a',
'threshold' : 1.0,
'compare_mode' : 'lazy',
'match_mode' : 'identifier',
'result_mode' : 'joker' }])
]
## CFG_BIBMATCH_FUZZY_MATCH_VALIDATION_LIMIT -- Determines the minimum percentage of the
## amount of rules to be positively matched when comparing two records. Should the number
## of matches be lower than required matches but equal to or above this limit,
## the match will be considered fuzzy.
CFG_BIBMATCH_FUZZY_MATCH_VALIDATION_LIMIT = 0.65
## CFG_BIBMATCH_SEARCH_RESULT_MATCH_LIMIT -- Determines the maximum amount of search results
## a single search can return before acting as a non-match.
CFG_BIBMATCH_SEARCH_RESULT_MATCH_LIMIT = 15
######################################
## Part 21: BibAuthorID parameters ##
######################################
# CFG_BIBAUTHORID_MAX_PROCESSES is the max number of processes
# that may be spawned by the disambiguation algorithm
CFG_BIBAUTHORID_MAX_PROCESSES = 12
# CFG_BIBAUTHORID_PERSONID_SQL_MAX_THREADS is the max number of threads
# to parallelize sql queries during personID tables updates
CFG_BIBAUTHORID_PERSONID_SQL_MAX_THREADS = 12
# CFG_BIBAUTHORID_PERSONID_MIN_P_FROM_BCTKD_RA is the minimum confidence needed
# when backtracking automatically disambiguated authors to persons.
# Values in [0,1]
CFG_BIBAUTHORID_PERSONID_MIN_P_FROM_BCTKD_RA = 0.5
# CFG_BIBAUTHORID_PERSONID_MIN_P_FROM_NEW_RA is the threshold for
# the confidence in a paper by the disambiguation algorithm to have it
# automatically connected to a personID. Papers below the thresholds are
# left disconnected from persons if not already connected in other ways.
# values in [0,1]
CFG_BIBAUTHORID_PERSONID_MIN_P_FROM_NEW_RA = 0.5
# CFG_BIBAUTHORID_PERSONID_MAX_COMP_LIST_MIN_TRSH minimum threshold for
# disambiguated authors and persons: if less compatible than this the update
# process will create a new person to associate to the found disambiguated author.
CFG_BIBAUTHORID_PERSONID_MAX_COMP_LIST_MIN_TRSH = 0.5
# CFG_BIBAUTHORID_PERSONID_MAX_COMP_LIST_MIN_TRSH_P_N is a fallback mechanism
# to force a merge if a certain percentage of papers is compatible no matter
# what the confidences on the automatically disambiguated author looks like
CFG_BIBAUTHORID_PERSONID_MAX_COMP_LIST_MIN_TRSH_P_N = 0.5
# CFG_BIBAUTHORID_EXTERNAL_CLAIMED_RECORDS_KEY defines the user info
# keys for externally claimed records in an remote-login scenario--e.g. from arXiv.org
# e.g. "external_arxivids" for arXiv SSO
CFG_BIBAUTHORID_EXTERNAL_CLAIMED_RECORDS_KEY =
# CFG_BIBAUTHORID_ATTACH_VA_TO_MULTIPLE_RAS determines if the authorid
# algorithm is allowed to attach a virtual author to multiple
# real authors in the last run of the orphan processing.
# Comma separated list of values.
CFG_BIBAUTHORID_ATTACH_VA_TO_MULTIPLE_RAS = False
# CFG_BIBAUTHORID_AID_ENABLED
# Globally enable AuthorID Interfaces.
# If False: No guest, user or operator will have access to the system.
CFG_BIBAUTHORID_ENABLED = True
# CFG_BIBAUTHORID_AID_ON_AUTHORPAGES
# Enable AuthorID information on the author pages.
CFG_BIBAUTHORID_ON_AUTHORPAGES = True
# CFG_BIBAUTHORID_AUTHOR_TICKET_ADMIN_EMAIL defines the eMail address
# all ticket requests concerning authors will be sent to.
CFG_BIBAUTHORID_AUTHOR_TICKET_ADMIN_EMAIL = info@invenio-software.org
#CFG_BIBAUTHORID_UI_SKIP_ARXIV_STUB_PAGE defines if the optional arXive stub page is skipped
CFG_BIBAUTHORID_UI_SKIP_ARXIV_STUB_PAGE = False
######################################
## Part 22: BibClassify parameters ##
######################################
# CFG_BIBCLASSIFY_WEB_MAXKW -- maximum number of keywords to display
# in the Keywords tab web page.
CFG_BIBCLASSIFY_WEB_MAXKW = 100
########################################
## Part 23: Plotextractor parameters ##
########################################
## CFG_PLOTEXTRACTOR_SOURCE_BASE_URL -- for acquiring source tarballs for plot
## extraction, where should we look? If nothing is set, we'll just go
## to arXiv, but this can be a filesystem location, too
CFG_PLOTEXTRACTOR_SOURCE_BASE_URL = http://arxiv.org/
## CFG_PLOTEXTRACTOR_SOURCE_TARBALL_FOLDER -- for acquiring source tarballs for plot
## extraction, subfolder where the tarballs sit
CFG_PLOTEXTRACTOR_SOURCE_TARBALL_FOLDER = e-print/
## CFG_PLOTEXTRACTOR_SOURCE_PDF_FOLDER -- for acquiring source tarballs for plot
## extraction, subfolder where the pdf sit
CFG_PLOTEXTRACTOR_SOURCE_PDF_FOLDER = pdf/
## CFG_PLOTEXTRACTOR_DOWNLOAD_TIMEOUT -- a float representing the number of seconds
## to wait between each download of pdf and/or tarball from source URL.
CFG_PLOTEXTRACTOR_DOWNLOAD_TIMEOUT = 2.0
## CFG_PLOTEXTRACTOR_CONTEXT_LIMIT -- when extracting context of plots from
## TeX sources, this is the limitation of characters in each direction to extract
## context from. Default 750.
CFG_PLOTEXTRACTOR_CONTEXT_EXTRACT_LIMIT = 750
## CFG_PLOTEXTRACTOR_DISALLOWED_TEX -- when extracting context of plots from TeX
## sources, this is the list of TeX tags that will trigger 'end of context'.
CFG_PLOTEXTRACTOR_DISALLOWED_TEX = begin,end,section,includegraphics,caption,acknowledgements
## CFG_PLOTEXTRACTOR_CONTEXT_WORD_LIMIT -- when extracting context of plots from
## TeX sources, this is the limitation of words in each direction. Default 75.
CFG_PLOTEXTRACTOR_CONTEXT_WORD_LIMIT = 75
## CFG_PLOTEXTRACTOR_CONTEXT_SENTENCE_LIMIT -- when extracting context of plots from
## TeX sources, this is the limitation of sentences in each direction. Default 2.
CFG_PLOTEXTRACTOR_CONTEXT_SENTENCE_LIMIT = 2
######################################
## Part 24: WebStat parameters ##
######################################
# CFG_WEBSTAT_BIBCIRCULATION_START_YEAR defines the start date of the BibCirculation
# statistics. Value should have the format 'yyyy'. If empty, take all existing data.
CFG_WEBSTAT_BIBCIRCULATION_START_YEAR =
##########################
## THAT's ALL, FOLKS! ##
##########################
c4science · Help