Diffusion invenio-infoscience (maint-1.0) Browse

R3600/INSTALL
65e5488efbabmaint-1.0

INSTALL
View Options

			CERN DOCUMENT SERVER SOFTWARE (CDSware) INSTALLATION
			====================================================

			Revision: $Id$

			About
			=====

			This document specifies how to build, customize, and install the CERN
			Document Server Software (CDSware) for the first time. See
			RELEASE-NOTES if you are upgrading from a previous CDSware release.

			Contents
			========

			0. Prerequisites
			1. Quick instructions for the impatient CDSware admin
			2. Detailed instructions for the patient CDSware admin
			3. Configuration philosophy explained and elucidated

			0. Prerequisites
			================

			Here is the software you need to have around before you
			start installing CDSware:

			a) Unix-like operating system. The main development and
			production platform for CDSware at CERN is Debian GNU/Linux,
			but any Unix system supporting the software listed below
			should do. Note that localhost should have an MTA running
			so that CDSware can email notification alerts or registration
			information to the end users, contact moderators and
			reviewers of submitted documents, inform administrators about
			various runtime system information, etc.

			b) MySQL server (may be on a remote machine), and MySQL client
			(must be available locally too). MySQL versions 4.0.x are
			recommended, versions above 4.1.0 may cause troubles.
			Please set the variable ``max_allowed_packet'' in your
			``my.cnf'' init file to at least 4M.
			<http://mysql.com/>

			c) Apache 2 server, with support for loading DSO modules.
			Tested mainly with version 2.0.43 and above. Apache 2 is
			required for the mod_python module (see below).
			<http://httpd.apache.org/>

			Note for FreeBSD users: Thierry Thomas <thierry@FreeBSD.org>
			reports troubles with Python open() in the Apache 2 and
			mod_python context. The solution is either (1) to compile
			Apache 2 with --enable-threads (the port has a knob
			WITH_THREADS to do that); or (2) to add the two following two
			lines in Apache's envvars file:
			LD_PRELOAD=/usr/lib/libc_r.so # or libpthread.so
			export LD_PRELOAD

			d) Python v2.2.2 or above (v2.3.2 and above recommended):
			<http://python.org/>
			as well as the following Python modules:
			- (mandatory) MySQLdb version 0.9.2 (higher versions like
			MySQLdb 1.0.0 will not work!):
			<http://sourceforge.net/projects/mysql-python>
			- (mandatory) Numeric module (v21 and above):
			<http://sourceforge.net/projects/numpy>
			- (recommended) PyStemmer, for indexing and ranking:
			<http://sourceforge.net/projects/pystemmer/>
			- (recommended) PyRXP, for very fast XML MARC processing:
			<http://www.reportlab.org/pyrxp.html>
			- (recommended) Gnuplot.Py, for producing graphs:
			<http://gnuplot-py.sourceforge.net/>
			- (optional) 4suite, slower alternative to PyRXP:
			<http://4suite.org/>
			- (optional) Psyco, to speed up the code at places:
			<http://psyco.sourceforge.net/>

			e) mod_python Apache module. Tested mainly with versions
			3.0BETA4 and above. mod_python 3.x is required for Apache 2.
			Previous versions (as well as Apache 1 ones) exhibited some
			problems with MySQL connectivity in our experience.
			<http://www.modpython.org/>

			f) PHP compiled as Apache module, including MySQL support.
			Tested mainly with PHP version 4.3.0 and above. (Note that if
			you are compiling mod_php from source, it is good to compile
			it against the same MySQL client library as mod_python, so
			that the two Apache modules are using the same MySQL client
			library. We saw Apache/PHP/Python problems in the past when
			they weren't.)
			<http://www.php.net/>

			g) PHP compiled as a standalone command-line executable (CLI)
			(in addition to Apache module) is required, too. As of PHP
			4.3.0 you'll obtain the CLI executable by default, so you
			don't have to compile it separately. Note that PHP CLI should
			be compiled with the process control support (--enable-pcntl)
			and the compression library (--with-zlib).
			<http://www.php.net/manual/en/install.commandline.php>
			<http://www.php.net/manual/en/ref.pcntl.php>

			h) WML - Website META Language. Tested mainly with versions
			2.0.8 and 2.0.9. Note that on Red Hat Linux 9 the WML 2.0.9
			compiled with Perl 5.8.0 exhibits problems, so you better use
			downgraded/upgraded Perl for compiling WML on that platform.
			<http://www.engelschall.com/sw/wml/>

			i) If you want to be able to extract references from PDF fulltext
			files, then you need to install pdftotext version 3 at least.
			<http://www.foolabs.com/xpdf/home.html>

			j) If you want to be able to search for words in the fulltext files
			(i.e. to have fulltext indexing), then you need as well to install
			some of the following tools:
			- for PDF files: pdftotext or pstotext
			<http://www.foolabs.com/xpdf/home.html>
			<http://www.cs.wisc.edu/~ghost/doc/AFPL/>
			- for PostScript files: pstotext or ps2ascii
			<http://www.cs.wisc.edu/~ghost/doc/AFPL/>
			- for MS Word files: antiword, catdoc, or wvText
			<http://www.winfield.demon.nl/index.html>
			<http://www.ice.ru/~vitus/catdoc/index.html>
			<http://sourceforge.net/projects/wvware>
			- for MS PowerPoint files: pptHtml and html2text
			<http://www.xlhtml.org/>
			<http://userpage.fu-berlin.de/~mbayer/tools/html2text.html>
			- for MS Excel files: xlhtml and html2text
			<http://chicago.sourceforge.net/xlhtml/>
			<http://userpage.fu-berlin.de/~mbayer/tools/html2text.html>

			k) If you have chosen to install fast XML MARC Python processors
			in the step d) above, then you have to install the parsers
			themselves:
			- (optional) RXP:
			<http://www.cogsci.ed.ac.uk/~richard/rxp.html>
			- (optional) 4suite:
			<http://4suite.org/>

			l) (recommended) Gnuplot, the command-line driven interactive
			plotting program. It is used to display download and citation
			history graphs on the Detailed record pages on the web
			interface. Note that Gnuplot is not required, only
			recommended.
			<http://www.gnuplot.info/>

			m) (recommended) A Common Lisp implementation, such as CLISP,
			SBCL or CMUCL. It is used for the web server log analysing
			tool and the metadata checking program. Note that any of the
			three implementations CLISP, SBCL, or CMUCL will do. CMUCL
			produces fastest machine code, but it does not support UTF-8
			yet. Pick up CLISP if you don't know what to do. Note that a
			Common Lisp implementation is not required, only recommended.
			<http://clisp.cons.org/>
			<http://www.cons.org/cmucl/>
			<http://sbcl.sourceforge.net/>

			Note that the configure script checks whether you have all
			the prerequisite software installed and that it won't let
			you to continue unless everything is in order. It also warns you
			if it cannot find some optional, but recommended software.

			1. Quick instructions for the impatient CDSware admin
			=====================================================

			$ cd /usr/local/src/
			$ wget http://cdsware.cern.ch/download/cdsware-0.3.2.tar.gz
			$ wget http://cdsware.cern.ch/download/cdsware-0.3.2.tar.gz.md5
			$ wget http://cdsware.cern.ch/download/cdsware-0.3.2.tar.gz.sig
			$ md5sum -v -c cdsware-0.3.2.tar.gz.md5
			$ gpg --verify cdsware-0.3.2.tar.gz.sig cdsware-0.3.2.tar.gz
			$ tar xvfz cdsware-0.3.2.tar.gz
			$ cd cdsware-0.3.2
			$ ./configure --prefix=/usr/local/cdsware-DEMO \
			--with-webdir=/var/www/DEMO \
			--with-weburl=http://webserver.domain.com/DEMO \
			--with-dbhost=sqlserver.domain.com \
			--with-dbname=cdsware \
			--with-dbuser=cdsware \
			--with-dbpass=myp1ss \
			--with-python=/opt/python/bin/python2.3
			$ vi ./config/config.wml ## optional, but strongly recommended
			$ make
			$ mysql -h sqlserver.domain.com -u root -p mysql
			mysql> CREATE DATABASE cdsware;
			mysql> GRANT ALL PRIVILEGES ON cdsware.* TO cdsware@webserver.domain.com IDENTIFIED BY 'myp1ss';
			$ sudo vi /path/to/apache/conf/httpd.conf ## see below in part 2
			$ sudo vi /path/to/php/conf/php.ini ## see below in part 2
			$ sudo /path/to/apache/bin/apachectl graceful
			$ make create-tables ## optional
			$ make install
			$ make test ## optional
			$ sudo chown -R www-data /usr/local/cdsware-DEMO/var
			$ make create-demo-site ## optional
			$ make load-demo-records ## optional
			$ make remove-demo-records ## optional
			$ make drop-demo-site ## optional
			$ netscape http://webserver.domain.com/cdsware/admin/ ## optional

			2. Detailed instructions for the patient CDSware admin
			======================================================

			The CERN Document Server Software (CDSware) uses standard GNU autoconf
			method to build and install its files. This means that you proceed
			as follows:

			$ cd /usr/local/src/

			Change to a directory where we will configure and build the
			CDS Software. (The built files will be installed into
			different "target" directories later.)

			$ wget http://cdsware.cern.ch/download/cdsware-0.3.2.tar.gz
			$ wget http://cdsware.cern.ch/download/cdsware-0.3.2.tar.gz.md5
			$ wget http://cdsware.cern.ch/download/cdsware-0.3.2.tar.gz.sig

			Fetch CDSware source tarball from the CDSware distribution
			server, together with MD5 checksum and GnuPG cryptographic
			signature files useful for verifying the integrity of the
			tarball.

			$ md5sum -v -c cdsware-0.3.2.tar.gz.md5

			Verify MD5 checksum.

			$ gpg --verify cdsware-0.3.2.tar.gz.sig cdsware-0.3.2.tar.gz

			Verify GnuPG cryptographic signature. Note that you may
			first have to import my public key into your keyring, if you
			haven't done that already:
			$ gpg --keyserver wwwkeys.pgp.net --recv-keys 0xBA5A2B67
			The output of the gpg --verify command should then read:
			Good signature from "Tibor Simko <tibor@simko.info>"
			You can safely ignore any trusted signature certification
			warning that may follow after the signature has been
			successfully verified.

			$ tar xvfz cdsware-0.3.2.tar.gz

			Untar the distribution tarball.

			$ cd cdsware-0.3.2

			Go to the source directory.

			$ ./configure --prefix=/usr/local/cdsware-DEMO \
			--with-webdir=/var/www/DEMO \
			--with-weburl=http://webserver.domain.com/DEMO \
			--with-dbhost=sqlserver.domain.com \
			--with-dbname=cdsware \
			--with-dbuser=cdsware \
			--with-dbpass=myp1ss \
			--with-python=/opt/python/bin/python2.3

			Configure essential CDSware parameters, with the following
			signification:

			--prefix=/usr/local/cdsware-DEMO

			The CDSware general installation directory, used to
			hold command-line binaries and program libraries
			containing the core CDSware functionality, but also
			to store runtime log and cache information. Several
			subdirs like `bin', `lib', and `var' will be created
			inside the --prefix directory to this effect. Note
			that the --prefix directory should be chosen outside
			of the Apache htdocs tree, since no file from this
			directory is to be accessible on the Web.

			--with-webdir=/var/www/DEMO

			The directory holding the web interface to CDSware,
			i.e. containing all the callable scripts and web
			pages visible to the end user. Must be located
			inside Apache htdocs tree. The scripts within this
			directory will generally call core CDSware libraries
			and binaries installed in the --prefix directory.

			--with-weburl=http://webserver.domain.com/DEMO

			The URL corresponding to the --with-webdir directory.
			It will denote the home URL of your CDSware
			installation.

			--with-dbhost=sqlserver.domain.com
			--with-dbname=cdsware
			--with-dbuser=cdsware
			--with-dbpass=myp1ss

			The database server host, the database name, and the
			database user credentials.

			--with-python=/opt/python/bin/python2.3

			Optionally, specify a path to some specific Python
			binary. This is useful if you have more than one
			Python installation on your system. If you don't set
			this option, then the first Python that will be found
			in your PATH will be chosen for running CDSware.

			CDSware won't install to any other directory but to the two
			mentioned in this configuration line. Do not use trailing
			slashes when specifying any of the above values.

			This configuration step is mandatory, and is referred to as
			"pre-compile time configuration step a)" in the elucidative
			explanatory commentary below.

			(Note that if you prefer to build CDSware out of its source
			tree, you may run the above configure command like this:
			$ mkdir build && cd build && ../configure --prefix=...)

			$ vi ./config/config.wml ## optional, but strongly recommended

			Optionally, customize your CDSware installation. We
			strongly recommend you to edit at least the top of this file
			where you can define some very essential CDSware parameters
			like the name of your CDSware document server or the email
			address of the local CDSware administrator. (The latter is
			needed if you want to use administration modules, and you
			certainly do!)

			The rest of the "config.wml" file enables you to change the
			CDSware web page look and feel, and otherwise to influence
			its behaviour and default parameters.

			This configuration step is optional, but strongly
			recommended. It is referred to as "compile time
			configuration step b)" in the elucidative explanatory
			commentary below.

			$ make

			Launch the CDSware build. Since many messages are printed
			during the build process, you may want to run it in a
			fast-scrolling terminal such as rxvt or in a detached screen
			session.

			During this step all the pages and scripts will be
			pre-created and customized based on the config you have
			edited in the previous step.

			Before proceeding further with the CDSware installation, we
			have to do some admin-level tasks on the MySQL and Apache
			servers.

			$ mysql -h sqlserver.domain.com -u root -p mysql
			mysql> CREATE DATABASE cdsware;
			mysql> GRANT ALL PRIVILEGES ON cdsware.* TO cdsware@webserver.domain.com IDENTIFIED BY 'myp1ss';

			You need to create a dedicated database on your MySQL server
			that the CDSware can use for its purposes. Please
			contact your MySQL administrator and ask him to execute the
			above commands that will create the "cdsware" database, a
			user called "cdsware" with password "myp1ss", and that will
			grant all rights on the "cdsware" database to the "cdsware"
			user.

			(Of course, you are free to choose your own user credentials
			and the database name; the above values were just an
			example. See also the configure line below.)

			$ sudo vi /path/to/apache/conf/httpd.conf ## see below in part 2

			Please ask your webserver administrator to put the following
			lines in your "httpd.conf" configuration file:

			AddDefaultCharset UTF-8
			AddType application/x-httpd-php .php
			AddType application/x-httpd-php-source .phps
			DirectoryIndex index.en.html index.html index.py index.en.php index.php

			This is to ensure that the browsers will get UTF-8 as
			the default page encoding, that "*.php" files will be
			interpreted by the web server as PHP files, and that
			"index.py" or "index.en.php" will be considered as directory
			index file.

			In addition, you have to ask Apache to interpret .py files
			in the installation place via mod_python and to indicate
			path to CDSware's Python library directory (composed from
			your --prefix choice followed by `/lib/python'):

			<Directory /var/www/DEMO/>
			AddHandler python-program .py
			PythonHandler mod_python.publisher
			PythonPath "['/usr/local/cdsware-DEMO/lib/python']+sys.path"
			PythonDebug On
			</Directory>

			$ sudo vi /path/to/php/conf/php.ini ## see below in part 2

			Please ask your webserver administrator to put the following
			lines in your "php.ini" configuration file:

			log_errors = on
			display_errors = off
			expose_php = off
			max_execution_time = 160
			register_globals = on
			short_open_tag = on

			This will set up some relevant PHP variables.

			$ sudo /path/to/apache/bin/apachectl graceful

			Please ask your webserver administrator to restart the
			Apache server after the above "httpd.conf" and "php.ini"
			changes.

			After these admin-level tasks to be performed as root, let's
			now go back to finish the installation of the CDSware package.

			$ make create-tables ## optional

			Optionally, create CDSware tables on the MySQL server. You
			probably want to do this step only once, i.e. if you have
			not created any CDSware database and tables yet.

			$ make install

			Install the web pages, scripts, utilities and everything
			needed for runtime into the respective directories, as
			specified earlier by the configure command.

			After this step, you should be able to point your browser to
			the chosen URL of your local CDSware installation and see it
			running!

			$ make test

			Optionally, you can run our test suite to verify the results
			of known tests on your local CDSware installation. Note
			that this command should be run only after you have
			installed the whole system via `make install'.

			$ sudo chown -R www-data /usr/local/cdsware-DEMO/var

			One more superuser step, as we need to enable Apache server
			to write some log information and to cache interesting
			entities inside the "var" subdirectory of our CDSware
			general installation directory.

			Here we assume that your Apache server processes are run
			under "www-data" group. Change this appropriately for your
			system.

			$ make create-demo-site ## optional

			This step is recommended to test your local CDSware
			installation. It should give you our "Atlantis Institute of
			Science" demo installation, exactly as you see it at
			<http://cdsware.cern.ch/DEMO/>.

			$ make load-demo-records ## optional

			Optionally, load some demo records to be able to test
			indexing and searching of your local demo CDSware
			installation.

			$ make remove-demo-records ## optional

			Optionally, remove the demo records loaded in the previous
			step but otherwise keep the demo collection, submit, format
			etc configurations that you may reuse and modify for
			production purposes.

			$ make drop-demo-site ## optional

			Optionally, drop also all the demo configuration so that
			you'll have a blank CDSware system for your production
			purposes.

			$ netscape http://webserver.domain.com/DEMO/admin/ ## optional

			Optionally, do further runtime configuration of the CDSware,
			like definition of data collections, document types,
			document formats, word file tables, etc.

			This configuration step is optional, and is referred to as
			"runtime configuration step c)" in the elucidative
			explanatory commentary below.

			3. Configuration philosophy explained and elucidated
			====================================================

			As you could see from the above, the configuration of the CDSware is
			threefold:

			(a) pre-compile time configuration phase
			[uses command line options / while doing "configure"]
			(b) compile time configuration phase
			[uses WML / after "configure", while doing "make && make install"]
			(c) runtime configuration phase
			[uses MySQL / after "make install", while doing "netscape http://webserver.domain.com/DEMO/admin/"]

			What is the difference, and why?

			(a) pre-compile time configuration phase
			[uses command line options / while doing "configure"]

			This configures essential CDSware parameters that makes your
			CDSware copy installable and runable. The essential parameters
			include: general CDSware installation directory containing
			(among others) binaries, libraries, and log and cache
			directories; install directory for Web scripts and pages;
			and MySQL user and server credentials.

			This configuration step uses standard GNU autoconf approach,
			i.e. you will run the standard "configure" script. Note
			that the only arguments that CDSware takes into consideration
			are the general "--prefix" one and CDSware-specific
			"--with-foo" arguments, see the end of "configure --help"
			output.

			This configuration step is mandatory. Without knowing
			theses essential parameters there is nothing to install and
			nothing to run.

			Usually, you do this step only once.

			(b) compile time configuration phase
			[uses WML / after "configure", while doing "make && make install"]

			Optionally, you may choose to influence CDSware behaviour, to
			set up CDSware system name, to choose its default parameters,
			to change its look and feel, to add your local web pages, etc.

			This configuration step uses WML, the Website META Language.
			The most important configuration file is "config/config.wml"
			that you can edit at your will. Optionally, if you are an
			advanced user, you may edit other WML files in the
			distribution tree.

			After that, when you type "make", the CDSware pages will be
			pre-generated. We prefer that this configuration step is
			done during compile-time and not runtime, because of
			multiple reasons: (i) the pre-generated pages impose less
			load on the web server and the database server and so they
			are served faster to the end user; (ii) we use several
			different languages (Python, PHP) and by using independent
			compile-time configuration language we can share the same
			configuration variables across heterogeneous languages;
			(iii) use of WML and page templates enables you to easily
			change anything in the CDSware system, even into deep
			levels.

			If you are changing parameters and/or look and feel
			of CDSware pages, you may want to repeat these step several
			times:

			$ vi config/config.wml
			$ make drop-tables
			$ make create-tables
			$ make create-demo-site
			$ make load-demo-records
			$ netscape http://webserver.domain.com/DEMO/
			[...]

			to see what it brings, until you are satisfied with the
			result.

			(Note that you may as well choose to change these parameters
			inside the CDSware library configuration files later on,
			during runtime, at least for non-static Python and PHP
			pages.)

			(c) runtime configuration phase
			[uses MySQL / after "make install", while doing "netscape http://webserver.domain.com/DEMO/admin/"]

			Optionally, you will most probably want to define specific
			data collections, to configure submit and search page for those
			collections, to specify search options and word files to
			search in, formats how to display data, etc.

			This configuration step uses MySQL configuration tables and
			is done during the runtime, for your convenience. It means
			that after previous configuration step (b), and after
			successful "make install", if you are happy with its result
			you no longer edit WML files within the CDSware source tree but
			rather configure "fully running" CDSware installation via
			its Administration web interface.

			Usually, you will do this step many times in the future, to
			tweak the running installation, to add new collections and
			data types, etc.

			(Note that if you want to change something "deeper" in a
			running CDSware installation, such as look and feel of pages,
			or to add some new pages, then you may want to edit library
			configuration files for Python and PHP non-static pages, as
			noted above. But if you want to do really "deep" changes,
			you need to go back to WML source, so you may want to leave
			your customized copy of the CDSware WML source tree around.)

			We hope that this explains why we have chosen this three-level
			configuration model, and that you will find it convenient in real
			life.

			Good luck, and thanks for choosing the CERN Document Server Software.

			- CDS Development Group
			<cds.support@cern.ch>
			<http://cdsware.cern.ch/>

R3600/INSTALL65e5488efbabmaint-1.0

INSTALLView Options

R3600/INSTALL
65e5488efbabmaint-1.0

INSTALL
View Options