## This file is part of Invenio. ## Copyright (C) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 CERN. ## ## Invenio is free software; you can redistribute it and/or ## modify it under the terms of the GNU General Public License as ## published by the Free Software Foundation; either version 2 of the ## License, or (at your option) any later version. ## ## Invenio is distributed in the hope that it will be useful, but ## WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ## General Public License for more details. ## ## You should have received a copy of the GNU General Public License ## along with Invenio; if not, write to the Free Software Foundation, Inc., ## 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. ################################################### ## About 'invenio.conf' and 'invenio-local.conf' ## ################################################### ## The 'invenio.conf' file contains the vanilla default configuration ## parameters of a Invenio installation, as coming out of the ## distribution. The file should be self-explanatory. Once installed ## in its usual location (usually /opt/invenio/etc), you could in ## principle go ahead and change the values according to your local ## needs, but this is not advised. ## ## If you would like to customize some of these parameters, you should ## rather create a file named 'invenio-local.conf' in the same ## directory where 'invenio.conf' lives and you should write there ## only the customizations that you want to be different from the ## vanilla defaults. ## ## Here is a realistic, minimalist, yet production-ready example of ## what you would typically put there: ## ## $ cat /opt/invenio/etc/invenio-local.conf ## [Invenio] ## CFG_SITE_NAME = John Doe's Document Server ## CFG_SITE_NAME_INTL_fr = Serveur des Documents de John Doe ## CFG_SITE_URL = http://your.site.com ## CFG_SITE_SECURE_URL = https://your.site.com ## CFG_SITE_ADMIN_EMAIL = john.doe@your.site.com ## CFG_SITE_SUPPORT_EMAIL = john.doe@your.site.com ## CFG_WEBALERT_ALERT_ENGINE_EMAIL = john.doe@your.site.com ## CFG_WEBCOMMENT_ALERT_ENGINE_EMAIL = john.doe@your.site.com ## CFG_WEBCOMMENT_DEFAULT_MODERATOR = john.doe@your.site.com ## CFG_DATABASE_HOST = localhost ## CFG_DATABASE_NAME = invenio ## CFG_DATABASE_USER = invenio ## CFG_DATABASE_PASS = my123p$ss ## ## You should override at least the parameters mentioned above and the ## parameters mentioned in the `Part 1: Essential parameters' below in ## order to define some very essential runtime parameters such as the ## name of your document server (CFG_SITE_NAME and ## CFG_SITE_NAME_INTL_*), the visible URL of your document server ## (CFG_SITE_URL and CFG_SITE_SECURE_URL), the email address of the ## local Invenio administrator, comment moderator, and alert engine ## (CFG_SITE_SUPPORT_EMAIL, CFG_SITE_ADMIN_EMAIL, etc), and last but ## not least your database credentials (CFG_DATABASE_*). ## ## The Invenio system will then read both the default invenio.conf ## file and your customized invenio-local.conf file and it will ## override any default options with the ones you have specified in ## your local file. This cascading of configuration parameters will ## ease your future upgrades. [Invenio] ################################### ## Part 1: Essential parameters ## ################################### ## This part defines essential Invenio internal parameters that ## everybody should override, like the name of the server or the email ## address of the local Invenio administrator. ## CFG_DATABASE_* - specify which MySQL server to use, the name of the ## database to use, and the database access credentials. CFG_DATABASE_HOST = localhost CFG_DATABASE_PORT = 3306 CFG_DATABASE_NAME = invenio CFG_DATABASE_USER = invenio CFG_DATABASE_PASS = my123p$ss ## CFG_SITE_URL - specify URL under which your installation will be ## visible. For example, use "http://your.site.com". Do not leave ## trailing slash. CFG_SITE_URL = http://localhost ## CFG_SITE_SECURE_URL - specify secure URL under which your ## installation secure pages such as login or registration will be ## visible. For example, use "https://your.site.com". Do not leave ## trailing slash. If you don't plan on using HTTPS, then you may ## leave this empty. CFG_SITE_SECURE_URL = https://localhost ## CFG_SITE_NAME -- the visible name of your Invenio installation. CFG_SITE_NAME = Atlantis Institute of Fictive Science ## CFG_SITE_NAME_INTL -- the international versions of CFG_SITE_NAME ## in various languages. (See also CFG_SITE_LANGS below.) CFG_SITE_NAME_INTL_en = Atlantis Institute of Fictive Science CFG_SITE_NAME_INTL_fr = Atlantis Institut des Sciences Fictives CFG_SITE_NAME_INTL_de = Atlantis Institut der fiktiven Wissenschaft CFG_SITE_NAME_INTL_es = Atlantis Instituto de la Ciencia Fictive CFG_SITE_NAME_INTL_ca = Institut Atlantis de Ciència Fictícia CFG_SITE_NAME_INTL_pt = Instituto Atlantis de Ciência Fictícia CFG_SITE_NAME_INTL_it = Atlantis Istituto di Scienza Fittizia CFG_SITE_NAME_INTL_ru = Атлантис Институт фиктивных Наук CFG_SITE_NAME_INTL_sk = Atlantis Inštitút Fiktívnych Vied CFG_SITE_NAME_INTL_cs = Atlantis Institut Fiktivních Věd CFG_SITE_NAME_INTL_no = Atlantis Institutt for Fiktiv Vitenskap CFG_SITE_NAME_INTL_sv = Atlantis Institut för Fiktiv Vetenskap CFG_SITE_NAME_INTL_el = Ινστιτούτο Φανταστικών Επιστημών Ατλαντίδος CFG_SITE_NAME_INTL_uk = Інститут вигаданих наук в Атлантісі CFG_SITE_NAME_INTL_ja = Fictive 科学のAtlantis の協会 CFG_SITE_NAME_INTL_pl = Instytut Fikcyjnej Nauki Atlantis CFG_SITE_NAME_INTL_bg = Институт за фиктивни науки Атлантис CFG_SITE_NAME_INTL_hr = Institut Fiktivnih Znanosti Atlantis CFG_SITE_NAME_INTL_zh_CN = 阿特兰提斯虚拟科学学院 CFG_SITE_NAME_INTL_zh_TW = 阿特蘭提斯虛擬科學學院 CFG_SITE_NAME_INTL_hu = Kitalált Tudományok Atlantiszi Intézete CFG_SITE_NAME_INTL_af = Atlantis Instituut van Fiktiewe Wetenskap CFG_SITE_NAME_INTL_gl = Instituto Atlantis de Ciencia Fictive CFG_SITE_NAME_INTL_ro = Institutul Atlantis al Ştiinţelor Fictive CFG_SITE_NAME_INTL_rw = Atlantis Ishuri Rikuru Ry'ubuhanga CFG_SITE_NAME_INTL_ka = ატლანტიდის ფიქტიური მეცნიერების ინსტიტუტი ## CFG_SITE_LANG -- the default language of the interface: ' CFG_SITE_LANG = en ## CFG_SITE_LANGS -- list of all languages the user interface should ## be available in, separated by commas. The order specified below ## will be respected on the interface pages. A good default would be ## to use the alphabetical order. Currently supported languages ## include Afrikaans, Bulgarian, Catalan, Czech, German, Georgian, ## Greek, English, Spanish, French, Croatian, Hungarian, Galician, ## Italian, Japanese, Kinyarwanda, Norwegian, Polish, Portuguese, ## Romanian, Russian, Slovak, Swedish, Ukrainian, Chinese (China), ## Chinese (Taiwan), so that the eventual maximum you can currently ## select is "af,bg,ca,cs,de,el,en,es,fr,hr,gl,it,ka,rw,hu,ja,no,pl,pt,ro,ru,sk,sv,uk,zh_CN,zh_TW". CFG_SITE_LANGS = af,bg,ca,cs,de,el,en,es,fr,hr,gl,it,ka,rw,hu,ja,no,pl,pt,ro,ru,sk,sv,uk,zh_CN,zh_TW ## CFG_SITE_SUPPORT_EMAIL -- the email address of the support team for ## this installation: CFG_SITE_SUPPORT_EMAIL = info@invenio-software.org ## CFG_SITE_ADMIN_EMAIL -- the email address of the 'superuser' for ## this installation. Enter your email address below and login with ## this address when using Invenio inistration modules. You ## will then be automatically recognized as superuser of the system. CFG_SITE_ADMIN_EMAIL = info@invenio-software.org ## CFG_SITE_EMERGENCY_EMAIL_ADDRESSES -- list of email addresses to ## which an email should be sent in case of emergency (e.g. bibsched ## queue has been stopped because of an error). Configuration ## dictionary allows for different recipients based on weekday and ## time-of-day. Example: ## ## CFG_SITE_EMERGENCY_EMAIL_ADDRESSES = { ## 'Sunday 22:00-06:00': '0041761111111@email2sms.foo.com', ## '06:00-18:00': 'team-in-europe@foo.com,0041762222222@email2sms.foo.com', ## '18:00-06:00': 'team-in-usa@foo.com', ## '*': 'john.doe.phone@foo.com'} ## ## If you want the emergency email notifications to always go to the ## same address, just use the wildcard line in the above example. CFG_SITE_EMERGENCY_EMAIL_ADDRESSES = {} ## CFG_SITE_ADMIN_EMAIL_EXCEPTIONS -- set this to 0 if you do not want ## to receive any captured exception via email to CFG_SITE_ADMIN_EMAIL ## address. Captured exceptions will still be available in ## var/log/invenio.err file. Set this to 1 if you want to receive ## some of the captured exceptions (this depends on the actual place ## where the exception is captured). Set this to 2 if you want to ## receive all captured exceptions. CFG_SITE_ADMIN_EMAIL_EXCEPTIONS = 1 ## CFG_ERRORLIB_RESET_EXCEPTION_NOTIFICATION_COUNTER_AFTER -- set this to ## the number of seconds after which to reset the exception notification ## counter. A given repetitive exception is notified via email with a ## logarithmic strategy: the first time it is seen it is sent via email, ## then the second time, then the fourth, then the eighth and so forth. ## If the number of seconds elapsed since the last time it was notified ## is greater than CFG_ERRORLIB_RESET_EXCEPTION_NOTIFICATION_COUNTER_AFTER ## then the internal counter is reset in order not to have exception ## notification become more and more rare. CFG_ERRORLIB_RESET_EXCEPTION_NOTIFICATION_COUNTER_AFTER = 14400 ## CFG_CERN_SITE -- do we want to enable CERN-specific code? ## Put "1" for "yes" and "0" for "no". CFG_CERN_SITE = 0 ## CFG_INSPIRE_SITE -- do we want to enable INSPIRE-specific code? ## Put "1" for "yes" and "0" for "no". CFG_INSPIRE_SITE = 0 ## CFG_ADS_SITE -- do we want to enable ADS-specific code? ## Put "1" for "yes" and "0" for "no". CFG_ADS_SITE = 0 ## CFG_OPENAIRE_SITE -- do we want to enable OpenAIRE-specific code? ## Put "1" for "yes" and "0" for "no". CFG_OPENAIRE_SITE = 0 ## CFG_DEVEL_SITE -- is this a development site? If it is, you might ## prefer that it does not do certain things. For example, you might ## not want WebSubmit to send certain emails or trigger certain ## processes on a development site. ## Put "1" for "yes" (this is a development site) or "0" for "no" ## (this isn't a development site.) CFG_DEVEL_SITE = 0 ################################ ## Part 2: Web page style ## ################################ ## The variables affecting the page style. The most important one is ## the 'template skin' you would like to use and the obfuscation mode ## for your email addresses. Please refer to the WebStyle Admin Guide ## for more explanation. The other variables are listed here mostly ## for backwards compatibility purposes only. ## CFG_WEBSTYLE_TEMPLATE_SKIN -- what template skin do you want to ## use? CFG_WEBSTYLE_TEMPLATE_SKIN = default ## CFG_WEBSTYLE_EMAIL_ADDRESSES_OBFUSCATION_MODE. How do we "protect" ## email addresses from undesired automated email harvesters? This ## setting will not affect 'support' and 'admin' emails. ## NOTE: there is no ultimate solution to protect against email ## harvesting. All have drawbacks and can more or less be ## circumvented. Choose you preferred mode ([t] means "transparent" ## for the user): ## -1: hide all emails. ## [t] 0 : no protection, email returned as is. ## foo@example.com => foo@example.com ## 1 : basic email munging: replaces @ by [at] and . by [dot] ## foo@example.com => foo [at] example [dot] com ## [t] 2 : transparent name mangling: characters are replaced by ## equivalent HTML entities. ## foo@example.com => foo@example.com ## [t] 3 : javascript insertion. Requires Javascript enabled on client ## side. ## 4 : replaces @ and . characters by gif equivalents. ## foo@example.com => foo [at] example [dot] com CFG_WEBSTYLE_EMAIL_ADDRESSES_OBFUSCATION_MODE = 2 ## CFG_WEBSTYLE_INSPECT_TEMPLATES -- Do we want to debug all template ## functions so that they would return HTML results wrapped in ## comments indicating which part of HTML page was created by which ## template function? Useful only for debugging Pythonic HTML ## template. See WebStyle Admin Guide for more information. CFG_WEBSTYLE_INSPECT_TEMPLATES = 0 ## (deprecated) CFG_WEBSTYLE_CDSPAGEBOXLEFTTOP -- eventual global HTML ## left top box: CFG_WEBSTYLE_CDSPAGEBOXLEFTTOP = ## (deprecated) CFG_WEBSTYLE_CDSPAGEBOXLEFTBOTTOM -- eventual global ## HTML left bottom box: CFG_WEBSTYLE_CDSPAGEBOXLEFTBOTTOM = ## (deprecated) CFG_WEBSTYLE_CDSPAGEBOXRIGHTTOP -- eventual global ## HTML right top box: CFG_WEBSTYLE_CDSPAGEBOXRIGHTTOP = ## (deprecated) CFG_WEBSTYLE_CDSPAGEBOXRIGHTBOTTOM -- eventual global ## HTML right bottom box: CFG_WEBSTYLE_CDSPAGEBOXRIGHTBOTTOM = ## CFG_WEBSTYLE_HTTP_STATUS_ALERT_LIST -- when certain HTTP status ## codes are raised to the WSGI handler, the corresponding exceptions ## and error messages can be sent to the system administrator for ## inspecting. This is useful to detect and correct errors. The ## variable represents a comma-separated list of HTTP statuses that ## should alert admin. Wildcards are possible. If the status is ## followed by an "r", it means that a referer is required to exist ## (useful to distinguish broken known links from URL typos when 404 ## errors are raised). CFG_WEBSTYLE_HTTP_STATUS_ALERT_LIST = 404r,400,5*,41* ################################## ## Part 3: WebSearch parameters ## ################################## ## This section contains some configuration parameters for WebSearch ## module. Please note that WebSearch is mostly configured on ## run-time via its WebSearch Admin web interface. The parameters ## below are the ones that you do not probably want to modify very ## often during the runtime. (Note that you may modify them ## afterwards too, though.) ## CFG_WEBSEARCH_SEARCH_CACHE_SIZE -- how many queries we want to ## cache in memory per one Apache httpd process? This cache is used ## mainly for "next/previous page" functionality, but it caches also ## "popular" user queries if more than one user happen to search for ## the same thing. Note that large numbers may lead to great memory ## consumption. We recommend a value not greater than 100. CFG_WEBSEARCH_SEARCH_CACHE_SIZE = 0 ## CFG_WEBSEARCH_FIELDS_CONVERT -- if you migrate from an older ## system, you may want to map field codes of your old system (such as ## 'ti') to Invenio/MySQL ("title"). Use Python dictionary syntax ## for the translation table, e.g. {'wau':'author', 'wti':'title'}. ## Usually you don't want to do that, and you would use empty dict {}. CFG_WEBSEARCH_FIELDS_CONVERT = {} ## CFG_WEBSEARCH_LIGHTSEARCH_PATTERN_BOX_WIDTH -- width of the ## search pattern window in the light search interface, in ## characters. CFG_WEBSEARCH_LIGHTSEARCH_PATTERN_BOX_WIDTH = 60 CFG_WEBSEARCH_LIGHTSEARCH_PATTERN_BOX_WIDTH = 60 ## CFG_WEBSEARCH_SIMPLESEARCH_PATTERN_BOX_WIDTH -- width of the search ## pattern window in the simple search interface, in characters. CFG_WEBSEARCH_SIMPLESEARCH_PATTERN_BOX_WIDTH = 40 ## CFG_WEBSEARCH_ADVANCEDSEARCH_PATTERN_BOX_WIDTH -- width of the ## search pattern window in the advanced search interface, in ## characters. CFG_WEBSEARCH_ADVANCEDSEARCH_PATTERN_BOX_WIDTH = 30 ## CFG_WEBSEARCH_NB_RECORDS_TO_SORT -- how many records do we still ## want to sort? For higher numbers we print only a warning and won't ## perform any sorting other than default 'latest records first', as ## sorting would be very time consuming then. We recommend a value of ## not more than a couple of thousands. CFG_WEBSEARCH_NB_RECORDS_TO_SORT = 1000 ## CFG_WEBSEARCH_CALL_BIBFORMAT -- if a record is being displayed but ## it was not preformatted in the "HTML brief" format, do we want to ## call BibFormatting on the fly? Put "1" for "yes" and "0" for "no". ## Note that "1" will display the record exactly as if it were fully ## preformatted, but it may be slow due to on-the-fly processing; "0" ## will display a default format very fast, but it may not have all ## the fields as in the fully preformatted HTML brief format. Note ## also that this option is active only for old (PHP) formats; the new ## (Python) formats are called on the fly by default anyway, since ## they are much faster. When usure, please set "0" here. CFG_WEBSEARCH_CALL_BIBFORMAT = 0 ## CFG_WEBSEARCH_USE_ALEPH_SYSNOS -- do we want to make old SYSNOs ## visible rather than MySQL's record IDs? You may use this if you ## migrate from a different e-doc system, and you store your old ## system numbers into 970__a. Put "1" for "yes" and "0" for ## "no". Usually you don't want to do that, though. CFG_WEBSEARCH_USE_ALEPH_SYSNOS = 0 ## CFG_WEBSEARCH_I18N_LATEST_ADDITIONS -- Put "1" if you want the ## "Latest Additions" in the web collection pages to show ## internationalized records. Useful only if your brief BibFormat ## templates contains internationalized strings. Otherwise put "0" in ## order not to slow down the creation of latest additions by WebColl. CFG_WEBSEARCH_I18N_LATEST_ADDITIONS = 0 ## CFG_WEBSEARCH_INSTANT_BROWSE -- the number of records to display ## under 'Latest Additions' in the web collection pages. CFG_WEBSEARCH_INSTANT_BROWSE = 10 ## CFG_WEBSEARCH_INSTANT_BROWSE_RSS -- the number of records to ## display in the RSS feed. CFG_WEBSEARCH_INSTANT_BROWSE_RSS = 25 ## CFG_WEBSEARCH_RSS_I18N_COLLECTIONS -- comma-separated list of ## collections that feature an internationalized RSS feed on their ## main seach interface page created by webcoll. Other collections ## will have RSS feed using CFG_SITE_LANG. CFG_WEBSEARCH_RSS_I18N_COLLECTIONS = ## CFG_WEBSEARCH_RSS_TTL -- number of minutes that indicates how long ## a feed cache is valid. CFG_WEBSEARCH_RSS_TTL = 360 ## CFG_WEBSEARCH_RSS_MAX_CACHED_REQUESTS -- maximum number of request kept ## in cache. If the cache is filled, following request are not cached. CFG_WEBSEARCH_RSS_MAX_CACHED_REQUESTS = 1000 ## CFG_WEBSEARCH_AUTHOR_ET_AL_THRESHOLD -- up to how many author names ## to print explicitely; for more print "et al". Note that this is ## used in default formatting that is seldomly used, as usually ## BibFormat defines all the format. The value below is only used ## when BibFormat fails, for example. CFG_WEBSEARCH_AUTHOR_ET_AL_THRESHOLD = 3 ## CFG_WEBSEARCH_NARROW_SEARCH_SHOW_GRANDSONS -- whether to show or ## not collection grandsons in Narrow Search boxes (sons are shown by ## default, grandsons are configurable here). Use 0 for no and 1 for ## yes. CFG_WEBSEARCH_NARROW_SEARCH_SHOW_GRANDSONS = 1 ## CFG_WEBSEARCH_CREATE_SIMILARLY_NAMED_AUTHORS_LINK_BOX -- shall we ## create help links for Ellis, Nick or Ellis, Nicholas and friends ## when Ellis, N was searched for? Useful if you have one author ## stored in the database under several name formats, namely surname ## comma firstname and surname comma initial cataloging policy. Use 0 ## for no and 1 for yes. CFG_WEBSEARCH_CREATE_SIMILARLY_NAMED_AUTHORS_LINK_BOX = 1 ## CFG_WEBSEARCH_USE_MATHJAX_FOR_FORMATS -- MathJax is a JavaScript ## library that renders (La)TeX mathematical formulas in the client ## browser. This parameter must contain a comma-separated list of ## output formats for which to apply the MathJax rendering, for example ## "hb,hd". If the list is empty, MathJax is disabled. CFG_WEBSEARCH_USE_MATHJAX_FOR_FORMATS = ## CFG_WEBSEARCH_EXTERNAL_COLLECTION_SEARCH_TIMEOUT -- when searching ## external collections (e.g. SPIRES, CiteSeer, etc), how many seconds ## do we wait for reply before abandonning? CFG_WEBSEARCH_EXTERNAL_COLLECTION_SEARCH_TIMEOUT = 5 ## CFG_WEBSEARCH_EXTERNAL_COLLECTION_SEARCH_MAXRESULTS -- how many ## results do we fetch? CFG_WEBSEARCH_EXTERNAL_COLLECTION_SEARCH_MAXRESULTS = 10 ## CFG_WEBSEARCH_SPLIT_BY_COLLECTION -- do we want to split the search ## results by collection or not? Use 0 for not, 1 for yes. CFG_WEBSEARCH_SPLIT_BY_COLLECTION = 1 ## CFG_WEBSEARCH_DEF_RECORDS_IN_GROUPS -- the default number of ## records to display per page in the search results pages. CFG_WEBSEARCH_DEF_RECORDS_IN_GROUPS = 10 ## CFG_WEBSEARCH_MAX_RECORDS_IN_GROUPS -- in order to limit denial of ## service attacks the total number of records per group displayed as a ## result of a search query will be limited to this number. Only the superuser ## queries will not be affected by this limit. CFG_WEBSEARCH_MAX_RECORDS_IN_GROUPS = 200 ## CFG_WEBSEARCH_PERMITTED_RESTRICTED_COLLECTIONS_LEVEL -- logged in users ## might have rights to access some restricted collections. This variable ## tweaks the kind of support the system will automatically provide to the ## user with respect to searching into these restricted collections. ## Set this to 0 in order to have the user to explicitly activate restricted ## collections in order to search into them. Set this to 1 in order to ## propose to the user the list of restricted collections to which he/she has ## rights (note: this is not yet implemented). Set this to 2 in order to ## silently add all the restricted collections to which the user has rights to ## to any query. ## Note: the system will discover which restricted collections a user has ## rights to, at login time. The time complexity of this procedure is ## proportional to the number of restricted collections. E.g. for a system ## with ~50 restricted collections, you might expect ~1s of delay in the ## login time, when this variable is set to a value higher than 0. CFG_WEBSEARCH_PERMITTED_RESTRICTED_COLLECTIONS_LEVEL = 0 ## CFG_WEBSEARCH_SHOW_COMMENT_COUNT -- do we want to show the 'N comments' ## links on the search engine pages? (useful only when you have allowed ## commenting) CFG_WEBSEARCH_SHOW_COMMENT_COUNT = 1 ## CFG_WEBSEARCH_SHOW_REVIEW_COUNT -- do we want to show the 'N reviews' ## links on the search engine pages? (useful only when you have allowed ## reviewing) CFG_WEBSEARCH_SHOW_REVIEW_COUNT = 1 ## CFG_WEBSEARCH_FULLTEXT_SNIPPETS -- how many full-text snippets to ## display for full-text searches? CFG_WEBSEARCH_FULLTEXT_SNIPPETS = 4 ## CFG_WEBSEARCH_FULLTEXT_SNIPPETS_WORDS -- how many context words ## to display around the pattern in the snippet? CFG_WEBSEARCH_FULLTEXT_SNIPPETS_WORDS = 4 ####################################### ## Part 4: BibHarvest OAI parameters ## ####################################### ## This part defines parameters for the Invenio OAI gateway. ## Useful if you are running Invenio as OAI data provider. ## CFG_OAI_ID_FIELD -- OAI identifier MARC field: CFG_OAI_ID_FIELD = 909COo ## CFG_OAI_SET_FIELD -- OAI set MARC field: CFG_OAI_SET_FIELD = 909COp ## CFG_OAI_DELETED_POLICY -- OAI deletedrecordspolicy ## (no/transient/persistent). CFG_OAI_DELETED_POLICY = no ## CFG_OAI_ID_PREFIX -- OAI identifier prefix: CFG_OAI_ID_PREFIX = atlantis.cern.ch ## CFG_OAI_SAMPLE_IDENTIFIER -- OAI sample identifier: CFG_OAI_SAMPLE_IDENTIFIER = oai:atlantis.cern.ch:CERN-TH-4036 ## CFG_OAI_IDENTIFY_DESCRIPTION -- description for the OAI Identify verb: CFG_OAI_IDENTIFY_DESCRIPTION = oai atlantis.cern.ch : oai:atlantis.cern.ch:CERN-TH-4036 http://atlantis.cern.ch/ Free and unlimited use by anybody with obligation to refer to original record Full content, i.e. preprints may not be harvested by robots Submission restricted. Submitted documents are subject of approval by OAI repository admins. ## CFG_OAI_LOAD -- OAI number of records in a response: CFG_OAI_LOAD = 1000 ## CFG_OAI_EXPIRE -- OAI resumptionToken expiration time: CFG_OAI_EXPIRE = 90000 ## CFG_OAI_SLEEP -- service unavailable between two consecutive ## requests for CFG_OAI_SLEEP seconds: CFG_OAI_SLEEP = 10 ################################## ## Part 5: WebSubmit parameters ## ################################## ## This section contains some configuration parameters for WebSubmit ## module. Please note that WebSubmit is mostly configured on ## run-time via its WebSubmit Admin web interface. The parameters ## below are the ones that you do not probably want to modify during ## the runtime. ## CFG_WEBSUBMIT_DOCUMENT_FILE_MANAGER_DOCTYPES -- this is the list of ## doctypes (like 'Main' or 'Additional') and their description that admins ## can choose from when adding new files via the Document File Manager ## admin interface. ## - When no value is provided, admins cannot add new ## file (they can only revise/delete/add format) ## - When a single value is given, it is used as ## default doctype for all new documents ## ## Order is relevant ## Eg: ## [('main', 'Main document'), ('additional', 'Figure, schema. etc')] CFG_WEBSUBMIT_DOCUMENT_FILE_MANAGER_DOCTYPES = [ ('Main', 'Main document'), ('LaTeX', 'LaTeX'), ('Source', 'Source'), ('Additional', 'Additional File'), ('Audio', 'Audio file'), ('Video', 'Video file'), ('Script', 'Script'), ('Data', 'Data'), ('Figure', 'Figure'), ('Schema', 'Schema'), ('Graph', 'Graph'), ('Image', 'Image'), ('Drawing', 'Drawing'), ('Slides', 'Slides')] ## CFG_WEBSUBMIT_DOCUMENT_FILE_MANAGER_RESTRICTIONS -- this is the ## list of restrictions (like 'Restricted' or 'No Restriction') and their ## description that admins can choose from when adding or revising files. ## Restrictions can then be configured at the level of WebAccess. ## - When no value is provided, no restriction is ## applied ## - When a single value is given, it is used as ## default resctriction for all documents. ## - The first value of the list is used as default ## restriction if the user if not given the ## choice of the restriction. Order is relevant ## ## Eg: ## [('', 'No restriction'), ('restr', 'Restricted')] CFG_WEBSUBMIT_DOCUMENT_FILE_MANAGER_RESTRICTIONS = [ ('', 'Public'), ('restricted', 'Restricted')] ## CFG_WEBSUBMIT_DOCUMENT_FILE_MANAGER_MISC -- set here the other ## default flags and attributes to tune the Document File Manager admin ## interface. ## See the docstring of websubmit_managedocfiles.create_file_upload_interface ## to have a description of the available parameters and their syntax. ## In general you will rarely need to change this variable. CFG_WEBSUBMIT_DOCUMENT_FILE_MANAGER_MISC = { 'can_revise_doctypes': ['*'], 'can_comment_doctypes': ['*'], 'can_describe_doctypes': ['*'], 'can_delete_doctypes': ['*'], 'can_keep_doctypes': ['*'], 'can_rename_doctypes': ['*'], 'can_add_format_to_doctypes': ['*'], 'can_restrict_doctypes': ['*'], } ## CFG_WEBSUBMIT_FILESYSTEM_BIBDOC_GROUP_LIMIT -- the fulltext ## documents are stored under "/opt/invenio/var/data/files/gX/Y" ## directories where X is 0,1,... and Y stands for bibdoc ID. Thusly ## documents Y are grouped into directories X and this variable ## indicates the maximum number of documents Y stored in each ## directory X. This limit is imposed solely for filesystem ## performance reasons in order not to have too many subdirectories in ## a given directory. CFG_WEBSUBMIT_FILESYSTEM_BIBDOC_GROUP_LIMIT = 5000 ## CFG_WEBSUBMIT_ADDITIONAL_KNOWN_FILE_EXTENSIONS -- a comma-separated ## list of document extensions not listed in Python standard mimetype ## library that should be recognized by Invenio. CFG_WEBSUBMIT_ADDITIONAL_KNOWN_FILE_EXTENSIONS = hpg,link,lis,llb,mat,mpp,msg,docx,docm,xlsx,xlsm,xlsb,pptx,pptm,ppsx,ppsm ## CFG_BIBDOCFILE_USE_XSENDFILE -- if your web server supports ## XSendfile header, you may want to enable this feature in order for ## to Invenio tell the web server to stream files for download (after ## proper authorization checks) by web server's means. This helps to ## liberate Invenio worker processes from being busy with sending big ## files to clients. The web server will take care of that. Note: ## this feature is still somewhat experimental. Note: when enabled ## (set to 1), then you have to also regenerate Apache vhost conf ## snippets (inveniocfg --update-config-py --create-apache-conf). CFG_BIBDOCFILE_USE_XSENDFILE = 0 ## CFG_BIBDOCFILE_MD5_CHECK_PROBABILITY -- a number between 0 and ## 1 that indicates probability with which MD5 checksum will be ## verified when streaming bibdocfile-managed files. (0.1 will cause ## the check to be performed once for every 10 downloads) CFG_BIBDOCFILE_MD5_CHECK_PROBABILITY = 0.1 ## CFG_OPENOFFICE_SERVER_HOST -- the host where an OpenOffice Server is ## listening to. If localhost an OpenOffice server will be started ## automatically if it is not already running. ## Note: if you set this to an empty value this will disable the usage of ## OpenOffice for converting documents. ## If you set this to something different than localhost you'll have to take ## care to have an OpenOffice server running on the corresponding host and ## to install the same OpenOffice release both on the client and on the server ## side. ## In order to launch an OpenOffice server on a remote machine, just start ## the usual 'soffice' executable in this way: ## $> soffice -headless -nologo -nodefault -norestore -nofirststartwizard \ ## .. -accept=socket,host=HOST,port=PORT;urp;StarOffice.ComponentContext CFG_OPENOFFICE_SERVER_HOST = localhost ## CFG_OPENOFFICE_SERVER_PORT -- the port where an OpenOffice Server is ## listening to. CFG_OPENOFFICE_SERVER_PORT = 2002 ## CFG_OPENOFFICE_USER -- the user that will be used to launch the OpenOffice ## client. It is recommended to set this to a user who don't own files, like ## e.g. 'nobody'. You should also authorize your Apache server user to be ## able to become this user, e.g. by adding to your /etc/sudoers the following ## line: ## "apache ALL=(nobody) NOPASSWD: ALL" ## provided that apache is the username corresponding to the Apache user. ## On some machine this might be apache2 or www-data. CFG_OPENOFFICE_USER = nobody ################################# ## Part 6: BibIndex parameters ## ################################# ## This section contains some configuration parameters for BibIndex ## module. Please note that BibIndex is mostly configured on run-time ## via its BibIndex Admin web interface. The parameters below are the ## ones that you do not probably want to modify very often during the ## runtime. ## CFG_BIBINDEX_FULLTEXT_INDEX_LOCAL_FILES_ONLY -- when fulltext indexing, do ## you want to index locally stored files only, or also external URLs? ## Use "0" to say "no" and "1" to say "yes". CFG_BIBINDEX_FULLTEXT_INDEX_LOCAL_FILES_ONLY = 0 ## CFG_BIBINDEX_REMOVE_STOPWORDS -- when indexing, do we want to remove ## stopwords? Use "0" to say "no" and "1" to say "yes". CFG_BIBINDEX_REMOVE_STOPWORDS = 0 ## CFG_BIBINDEX_CHARS_ALPHANUMERIC_SEPARATORS -- characters considered as ## alphanumeric separators of word-blocks inside words. You probably ## don't want to change this. CFG_BIBINDEX_CHARS_ALPHANUMERIC_SEPARATORS = \!\"\#\$\%\&\'\(\)\*\+\,\-\.\/\:\;\<\=\>\?\@\[\\\]\^\_\`\{\|\}\~ ## CFG_BIBINDEX_CHARS_PUNCTUATION -- characters considered as punctuation ## between word-blocks inside words. You probably don't want to ## change this. CFG_BIBINDEX_CHARS_PUNCTUATION = \.\,\:\;\?\!\" ## CFG_BIBINDEX_REMOVE_HTML_MARKUP -- should we attempt to remove HTML markup ## before indexing? Use 1 if you have HTML markup inside metadata ## (e.g. in abstracts), use 0 otherwise. CFG_BIBINDEX_REMOVE_HTML_MARKUP = 0 ## CFG_BIBINDEX_REMOVE_LATEX_MARKUP -- should we attempt to remove LATEX markup ## before indexing? Use 1 if you have LATEX markup inside metadata ## (e.g. in abstracts), use 0 otherwise. CFG_BIBINDEX_REMOVE_LATEX_MARKUP = 0 ## CFG_BIBINDEX_MIN_WORD_LENGTH -- minimum word length allowed to be added to ## index. The terms smaller then this amount will be discarded. ## Useful to keep the database clean, however you can safely leave ## this value on 0 for up to 1,000,000 documents. CFG_BIBINDEX_MIN_WORD_LENGTH = 0 ## CFG_BIBINDEX_URLOPENER_USERNAME and CFG_BIBINDEX_URLOPENER_PASSWORD -- ## access credentials to access restricted URLs, interesting only if ## you are fulltext-indexing files located on a remote server that is ## only available via username/password. But it's probably better to ## handle this case via IP or some convention; the current scheme is ## mostly there for demo only. CFG_BIBINDEX_URLOPENER_USERNAME = mysuperuser CFG_BIBINDEX_URLOPENER_PASSWORD = mysuperpass ## CFG_INTBITSET_ENABLE_SANITY_CHECKS -- ## Enable sanity checks for integers passed to the intbitset data ## structures. It is good to enable this during debugging ## and to disable this value for speed improvements. CFG_INTBITSET_ENABLE_SANITY_CHECKS = False ## CFG_BIBINDEX_PERFORM_OCR_ON_DOCNAMES -- regular expression that matches ## docnames for which OCR is desired (set this to .* in order to enable ## OCR in general, set this to empty in order to disable it.) CFG_BIBINDEX_PERFORM_OCR_ON_DOCNAMES = scan-.* ## CFG_BIBINDEX_SPLASH_PAGES -- regular expression that matches URLs ## that are not to be indexed but that indirectly refers to documents ## that are supposed to be indexed. CFG_BIBINDEX_SPLASH_PAGES = http://documents\.cern\.ch/setlink\?.* ## CFG_BIBINDEX_AUTHOR_WORD_INDEX_EXCLUDE_FIRST_NAMES -- do we want ## the author word index to exclude first names to keep only last ## names? If set to True, then for the author `Bernard, Denis', only ## `Bernard' will be indexed in the word index, not `Denis'. Note ## that if you change this variable, you have to re-index the author ## index via `bibindex -w author -R'. CFG_BIBINDEX_AUTHOR_WORD_INDEX_EXCLUDE_FIRST_NAMES = False ####################################### ## Part 7: Access control parameters ## ####################################### ## This section contains some configuration parameters for the access ## control system. Please note that WebAccess is mostly configured on ## run-time via its WebAccess Admin web interface. The parameters ## below are the ones that you do not probably want to modify very ## often during the runtime. (If you do want to modify them during ## runtime, for example te deny access temporarily because of backups, ## you can edit access_control_config.py directly, no need to get back ## here and no need to redo the make process.) ## CFG_ACCESS_CONTROL_LEVEL_SITE -- defines how open this site is. ## Use 0 for normal operation of the site, 1 for read-only site (all ## write operations temporarily closed), 2 for site fully closed, ## 3 for also disabling any database connection. ## Useful for site maintenance. CFG_ACCESS_CONTROL_LEVEL_SITE = 0 ## CFG_ACCESS_CONTROL_LEVEL_GUESTS -- guest users access policy. Use ## 0 to allow guest users, 1 not to allow them (all users must login). CFG_ACCESS_CONTROL_LEVEL_GUESTS = 0 ## CFG_ACCESS_CONTROL_LEVEL_ACCOUNTS -- account registration and ## activation policy. When 0, users can register and accounts are ## automatically activated. When 1, users can register but admin must ## activate the accounts. When 2, users cannot register nor update ## their email address, only admin can register accounts. When 3, ## users cannot register nor update email address nor password, only ## admin can register accounts. When 4, the same as 3 applies, nor ## user cannot change his login method. When 5, then the same as 4 ## applies, plus info about how to get an account is hidden from the ## login page. CFG_ACCESS_CONTROL_LEVEL_ACCOUNTS = 0 ## CFG_ACCESS_CONTROL_LIMIT_REGISTRATION_TO_DOMAIN -- limit account ## registration to certain email addresses? If wanted, give domain ## name below, e.g. "cern.ch". If not wanted, leave it empty. CFG_ACCESS_CONTROL_LIMIT_REGISTRATION_TO_DOMAIN = ## CFG_ACCESS_CONTROL_NOTIFY_ADMIN_ABOUT_NEW_ACCOUNTS -- send a ## notification email to the administrator when a new account is ## created? Use 0 for no, 1 for yes. CFG_ACCESS_CONTROL_NOTIFY_ADMIN_ABOUT_NEW_ACCOUNTS = 0 ## CFG_ACCESS_CONTROL_NOTIFY_USER_ABOUT_NEW_ACCOUNT -- send a ## notification email to the user when a new account is created in order to ## to verify the validity of the provided email address? Use ## 0 for no, 1 for yes. CFG_ACCESS_CONTROL_NOTIFY_USER_ABOUT_NEW_ACCOUNT = 1 ## CFG_ACCESS_CONTROL_NOTIFY_USER_ABOUT_ACTIVATION -- send a ## notification email to the user when a new account is activated? ## Use 0 for no, 1 for yes. CFG_ACCESS_CONTROL_NOTIFY_USER_ABOUT_ACTIVATION = 0 ## CFG_ACCESS_CONTROL_NOTIFY_USER_ABOUT_DELETION -- send a ## notification email to the user when a new account is deleted or ## account demand rejected? Use 0 for no, 1 for yes. CFG_ACCESS_CONTROL_NOTIFY_USER_ABOUT_DELETION = 0 ## CFG_APACHE_PASSWORD_FILE -- the file where Apache user credentials ## are stored. Must be an absolute pathname. If the value does not ## start by a slash, it is considered to be the filename of a file ## located under prefix/var/tmp directory. This is useful for the ## demo site testing purposes. For the production site, if you plan ## to restrict access to some collections based on the Apache user ## authentication mechanism, you should put here an absolute path to ## your Apache password file. CFG_APACHE_PASSWORD_FILE = demo-site-apache-user-passwords ## CFG_APACHE_GROUP_FILE -- the file where Apache user groups are ## defined. See the documentation of the preceding config variable. CFG_APACHE_GROUP_FILE = demo-site-apache-user-groups ################################### ## Part 8: WebSession parameters ## ################################### ## This section contains some configuration parameters for tweaking ## session handling. ## CFG_WEBSESSION_EXPIRY_LIMIT_DEFAULT -- number of days after which a session ## and the corresponding cookie is considered expired. CFG_WEBSESSION_EXPIRY_LIMIT_DEFAULT = 2 ## CFG_WEBSESSION_EXPIRY_LIMIT_REMEMBER -- number of days after which a session ## and the corresponding cookie is considered expired, when the user has ## requested to permanently stay logged in. CFG_WEBSESSION_EXPIRY_LIMIT_REMEMBER = 365 ## CFG_WEBSESSION_RESET_PASSWORD_EXPIRE_IN_DAYS -- when user requested ## a password reset, for how many days is the URL valid? CFG_WEBSESSION_RESET_PASSWORD_EXPIRE_IN_DAYS = 3 ## CFG_WEBSESSION_ADDRESS_ACTIVATION_EXPIRE_IN_DAYS -- when an account ## activation email was sent, for how many days is the URL valid? CFG_WEBSESSION_ADDRESS_ACTIVATION_EXPIRE_IN_DAYS = 3 ## CFG_WEBSESSION_NOT_CONFIRMED_EMAIL_ADDRESS_EXPIRE_IN_DAYS -- when ## user won't confirm his email address and not complete ## registeration, after how many days will it expire? CFG_WEBSESSION_NOT_CONFIRMED_EMAIL_ADDRESS_EXPIRE_IN_DAYS = 10 ## CFG_WEBSESSION_DIFFERENTIATE_BETWEEN_GUESTS -- when set to 1, the session ## system allocates the same uid=0 to all guests users regardless of where they ## come from. 0 allocate a unique uid to each guest. CFG_WEBSESSION_DIFFERENTIATE_BETWEEN_GUESTS = 0 ################################ ## Part 9: BibRank parameters ## ################################ ## This section contains some configuration parameters for the ranking ## system. ## CFG_BIBRANK_SHOW_READING_STATS -- do we want to show reading ## similarity stats? ('People who viewed this page also viewed') CFG_BIBRANK_SHOW_READING_STATS = 1 ## CFG_BIBRANK_SHOW_DOWNLOAD_STATS -- do we want to show the download ## similarity stats? ('People who downloaded this document also ## downloaded') CFG_BIBRANK_SHOW_DOWNLOAD_STATS = 1 ## CFG_BIBRANK_SHOW_DOWNLOAD_GRAPHS -- do we want to show download ## history graph? CFG_BIBRANK_SHOW_DOWNLOAD_GRAPHS = 1 ## CFG_BIBRANK_SHOW_DOWNLOAD_GRAPHS_CLIENT_IP_DISTRIBUTION -- do we ## want to show a graph representing the distribution of client IPs ## downloading given document? CFG_BIBRANK_SHOW_DOWNLOAD_GRAPHS_CLIENT_IP_DISTRIBUTION = 0 ## CFG_BIBRANK_SHOW_CITATION_LINKS -- do we want to show the 'Cited ## by' links? (useful only when you have citations in the metadata) CFG_BIBRANK_SHOW_CITATION_LINKS = 1 ## CFG_BIBRANK_SHOW_CITATION_STATS -- de we want to show citation ## stats? ('Cited by M recors', 'Co-cited with N records') CFG_BIBRANK_SHOW_CITATION_STATS = 1 ## CFG_BIBRANK_SHOW_CITATION_GRAPHS -- do we want to show citation ## history graph? CFG_BIBRANK_SHOW_CITATION_GRAPHS = 1 #################################### ## Part 10: WebComment parameters ## #################################### ## This section contains some configuration parameters for the ## commenting and reviewing facilities. ## CFG_WEBCOMMENT_ALLOW_COMMENTS -- do we want to allow users write ## public comments on records? CFG_WEBCOMMENT_ALLOW_COMMENTS = 1 ## CFG_WEBCOMMENT_ALLOW_REVIEWS -- do we want to allow users write ## public reviews of records? CFG_WEBCOMMENT_ALLOW_REVIEWS = 1 ## CFG_WEBCOMMENT_ALLOW_SHORT_REVIEWS -- do we want to allow short ## reviews, that is just the attribution of stars without submitting ## detailed review text? CFG_WEBCOMMENT_ALLOW_SHORT_REVIEWS = 0 ## CFG_WEBCOMMENT_NB_REPORTS_BEFORE_SEND_EMAIL_TO_ADMIN -- if users ## report a comment to be abusive, how many they have to be before the ## site admin is alerted? CFG_WEBCOMMENT_NB_REPORTS_BEFORE_SEND_EMAIL_TO_ADMIN = 5 ## CFG_WEBCOMMENT_NB_COMMENTS_IN_DETAILED_VIEW -- how many comments do ## we display in the detailed record page upon welcome? CFG_WEBCOMMENT_NB_COMMENTS_IN_DETAILED_VIEW = 1 ## CFG_WEBCOMMENT_NB_REVIEWS_IN_DETAILED_VIEW -- how many reviews do ## we display in the detailed record page upon welcome? CFG_WEBCOMMENT_NB_REVIEWS_IN_DETAILED_VIEW = 1 ## CFG_WEBCOMMENT_ADMIN_NOTIFICATION_LEVEL -- do we notify the site ## admin after every comment? CFG_WEBCOMMENT_ADMIN_NOTIFICATION_LEVEL = 1 ## CFG_WEBCOMMENT_TIMELIMIT_PROCESSING_COMMENTS_IN_SECONDS -- how many ## elapsed seconds do we consider enough when checking for possible ## multiple comment submissions by a user? CFG_WEBCOMMENT_TIMELIMIT_PROCESSING_COMMENTS_IN_SECONDS = 20 ## CFG_WEBCOMMENT_TIMELIMIT_PROCESSING_REVIEWS_IN_SECONDS -- how many ## elapsed seconds do we consider enough when checking for possible ## multiple review submissions by a user? CFG_WEBCOMMENT_TIMELIMIT_PROCESSING_REVIEWS_IN_SECONDS = 20 ## CFG_WEBCOMMENT_USE_RICH_EDITOR -- enable the WYSIWYG ## Javascript-based editor when user edits comments? CFG_WEBCOMMENT_USE_RICH_TEXT_EDITOR = False ## CFG_WEBCOMMENT_ALERT_ENGINE_EMAIL -- the email address from which the ## alert emails will appear to be sent: CFG_WEBCOMMENT_ALERT_ENGINE_EMAIL = info@invenio-software.org ## CFG_WEBCOMMENT_DEFAULT_MODERATOR -- if no rules are ## specified to indicate who is the comment moderator of ## a collection, this person will be used as default CFG_WEBCOMMENT_DEFAULT_MODERATOR = info@invenio-software.org ## CFG_WEBCOMMENT_USE_MATHJAX_IN_COMMENTS -- do we want to allow the use ## of MathJax plugin to render latex input in comments? CFG_WEBCOMMENT_USE_MATHJAX_IN_COMMENTS = 1 ## CFG_WEBCOMMENT_AUTHOR_DELETE_COMMENT_OPTION -- allow comment author to ## delete its own comment? CFG_WEBCOMMENT_AUTHOR_DELETE_COMMENT_OPTION = 1 ################################## ## Part 11: BibSched parameters ## ################################## ## This section contains some configuration parameters for the ## bibliographic task scheduler. ## CFG_BIBSCHED_REFRESHTIME -- how often do we want to refresh ## bibsched monitor? (in seconds) CFG_BIBSCHED_REFRESHTIME = 5 ## CFG_BIBSCHED_LOG_PAGER -- what pager to use to view bibsched task ## logs? CFG_BIBSCHED_LOG_PAGER = /bin/more ## CFG_BIBSCHED_GC_TASKS_OLDER_THAN -- after how many days to perform the ## gargbage collector of BibSched queue (i.e. removing/moving task to archive). CFG_BIBSCHED_GC_TASKS_OLDER_THAN = 30 ## CFG_BIBSCHED_GC_TASKS_TO_REMOVE -- list of BibTask that can be safely ## removed from the BibSched queue once they are DONE. CFG_BIBSCHED_GC_TASKS_TO_REMOVE = bibindex,bibreformat,webcoll,bibrank,inveniogc ## CFG_BIBSCHED_GC_TASKS_TO_ARCHIVE -- list of BibTasks that should be safely ## archived out of the BibSched queue once they are DONE. CFG_BIBSCHED_GC_TASKS_TO_ARCHIVE = bibupload,oaiarchive ## CFG_BIBSCHED_MAX_NUMBER_CONCURRENT_TASKS -- maximum number of BibTasks ## that can run concurrently. ## NOTE: concurrent tasks are still considered as an experimental ## feature. Please keep this value set to 1 on production environments. CFG_BIBSCHED_MAX_NUMBER_CONCURRENT_TASKS = 1 ## CFG_BIBSCHED_PROCESS_USER -- bibsched and bibtask processes must ## usually run under the same identity as the Apache web server ## process in order to share proper file read/write privileges. If ## you want to force some other bibsched/bibtask user, e.g. because ## you are using a local `invenio' user that belongs to your ## `www-data' Apache user group and so shares writing rights with your ## Apache web server process in this way, then please set its username ## identity here. Otherwise we shall check whether your ## bibsched/bibtask processes are run under the same identity as your ## Apache web server process (in which case you can leave the default ## empty value here). CFG_BIBSCHED_PROCESS_USER = ################################### ## Part 12: WebBasket parameters ## ################################### ## CFG_WEBBASKET_MAX_NUMBER_OF_DISPLAYED_BASKETS -- a safety limit for ## a maximum number of displayed baskets CFG_WEBBASKET_MAX_NUMBER_OF_DISPLAYED_BASKETS = 20 ## CFG_WEBBASKET_USE_RICH_TEXT_EDITOR -- enable the WYSIWYG ## Javascript-based editor when user edits comments in WebBasket? CFG_WEBBASKET_USE_RICH_TEXT_EDITOR = False ################################## ## Part 13: WebAlert parameters ## ################################## ## This section contains some configuration parameters for the ## automatic email notification alert system. ## CFG_WEBALERT_ALERT_ENGINE_EMAIL -- the email address from which the ## alert emails will appear to be sent: CFG_WEBALERT_ALERT_ENGINE_EMAIL = info@invenio-software.org ## CFG_WEBALERT_MAX_NUM_OF_RECORDS_IN_ALERT_EMAIL -- how many records ## at most do we send in an outgoing alert email? CFG_WEBALERT_MAX_NUM_OF_RECORDS_IN_ALERT_EMAIL = 20 ## CFG_WEBALERT_MAX_NUM_OF_CHARS_PER_LINE_IN_ALERT_EMAIL -- number of ## chars per line in an outgoing alert email? CFG_WEBALERT_MAX_NUM_OF_CHARS_PER_LINE_IN_ALERT_EMAIL = 72 ## CFG_WEBALERT_SEND_EMAIL_NUMBER_OF_TRIES -- when sending alert ## emails fails, how many times we retry? CFG_WEBALERT_SEND_EMAIL_NUMBER_OF_TRIES = 3 ## CFG_WEBALERT_SEND_EMAIL_SLEEPTIME_BETWEEN_TRIES -- when sending ## alert emails fails, what is the sleeptime between tries? (in ## seconds) CFG_WEBALERT_SEND_EMAIL_SLEEPTIME_BETWEEN_TRIES = 300 #################################### ## Part 14: WebMessage parameters ## #################################### ## CFG_WEBMESSAGE_MAX_SIZE_OF_MESSAGE -- how large web messages do we ## allow? CFG_WEBMESSAGE_MAX_SIZE_OF_MESSAGE = 20000 ## CFG_WEBMESSAGE_MAX_NB_OF_MESSAGES -- how many messages for a ## regular user do we allow in its inbox? CFG_WEBMESSAGE_MAX_NB_OF_MESSAGES = 30 ## CFG_WEBMESSAGE_DAYS_BEFORE_DELETE_ORPHANS -- how many days before ## we delete orphaned messages? CFG_WEBMESSAGE_DAYS_BEFORE_DELETE_ORPHANS = 60 ################################## ## Part 15: MiscUtil parameters ## ################################## ## CFG_MISCUTIL_SQL_USE_SQLALCHEMY -- whether to use SQLAlchemy.pool ## in the DB engine of Invenio. It is okay to enable this flag ## even if you have not installed SQLAlchemy. Note that Invenio will ## loose some perfomance if this option is enabled. CFG_MISCUTIL_SQL_USE_SQLALCHEMY = False ## CFG_MISCUTIL_SQL_RUN_SQL_MANY_LIMIT -- how many queries can we run ## inside run_sql_many() in one SQL statement? The limit value ## depends on MySQL's max_allowed_packet configuration. CFG_MISCUTIL_SQL_RUN_SQL_MANY_LIMIT = 10000 ## CFG_MISCUTIL_SMTP_HOST -- which server to use as outgoing mail server to ## send outgoing emails generated by the system, for example concerning ## submissions or email notification alerts. CFG_MISCUTIL_SMTP_HOST = localhost ## CFG_MISCUTIL_SMTP_PORT -- which port to use on the outgoing mail server ## defined in the previous step. CFG_MISCUTIL_SMTP_PORT = 25 ## CFG_MISCUTILS_DEFAULT_PROCESS_TIMEOUT -- the default number of seconds after ## which a process launched trough shellutils.run_process_with_timeout will ## be killed. This is useful to catch runaway processes. CFG_MISCUTIL_DEFAULT_PROCESS_TIMEOUT = 300 ################################# ## Part 16: BibEdit parameters ## ################################# ## CFG_BIBEDIT_TIMEOUT -- when a user edits a record, this record is ## locked to prevent other users to edit it at the same time. ## How many seconds of inactivity before the locked record again will be free ## for other people to edit? CFG_BIBEDIT_TIMEOUT = 3600 ## CFG_BIBEDIT_LOCKLEVEL -- when a user tries to edit a record which there ## is a pending bibupload task for in the queue, this shouldn't be permitted. ## The lock level determines how thouroughly the queue should be investigated ## to determine if this is the case. ## Level 0 - always permits editing, doesn't look at the queue ## (unsafe, use only if you know what you are doing) ## Level 1 - permits editing if there are no queued bibedit tasks for this record ## (safe with respect to bibedit, but not for other bibupload maintenance jobs) ## Level 2 - permits editing if there are no queued bibupload tasks of any sort ## (safe, but may lock more than necessary if many cataloguers around) ## Level 3 - permits editing if no queued bibupload task concerns given record ## (safe, most precise locking, but slow, ## checks for 001/EXTERNAL_SYSNO_TAG/EXTERNAL_OAIID_TAG) ## The recommended level is 3 (default) or 2 (if you use maintenance jobs often). CFG_BIBEDIT_LOCKLEVEL = 3 ## CFG_BIBEDIT_PROTECTED_FIELDS -- a comma-separated list of fields that BibEdit ## will not allow to be added, edited or deleted. Wildcards are not supported, ## but conceptually a wildcard is added at the end of every field specification. ## Examples: ## 500A - protect all MARC fields with tag 500 and first indicator A ## 5 - protect all MARC fields in the 500-series. ## 909C_a - protect subfield a in tag 909 with first indicator C and empty ## second indicator ## Note that 001 is protected by default, but if protection of other ## identifiers or automated fields is a requirement, they should be added to ## this list. CFG_BIBEDIT_PROTECTED_FIELDS = ## CFG_BIBEDITMULTI_LIMIT_INSTANT_PROCESSING -- maximum number of records ## that can be modified instantly using the multi-record editor. Above ## this limit, modifications will only be executed in limited hours. CFG_BIBEDITMULTI_LIMIT_INSTANT_PROCESSING = 2000 ## CFG_BIBEDITMULTI_LIMIT_DELAYED_PROCESSING -- maximum number of records ## that can be send for modification without having a superadmin role. ## If the number of records is between CFG_BIBEDITMULTI_LIMIT_INSTANT_PROCESSING ## and this number, the modifications will take place only in limited hours. CFG_BIBEDITMULTI_LIMIT_DELAYED_PROCESSING = 20000 ## CFG_BIBEDITMULTI_LIMIT_DELAYED_PROCESSING_TIME -- Allowed time to ## execute modifications on records, when the number exceeds ## CFG_BIBEDITMULTI_LIMIT_INSTANT_PROCESSING. CFG_BIBEDITMULTI_LIMIT_DELAYED_PROCESSING_TIME = 22:00-05:00 ################################### ## Part 17: BibUpload parameters ## ################################### ## CFG_BIBUPLOAD_REFERENCE_TAG -- where do we store references? CFG_BIBUPLOAD_REFERENCE_TAG = 999 ## CFG_BIBUPLOAD_EXTERNAL_SYSNO_TAG -- where do we store external ## system numbers? Useful for matching when our records come from an ## external digital library system. CFG_BIBUPLOAD_EXTERNAL_SYSNO_TAG = 970__a ## CFG_BIBUPLOAD_EXTERNAL_OAIID_TAG -- where do we store OAI ID tags ## of harvested records? Useful for matching when we harvest stuff ## via OAI that we do not want to reexport via Invenio OAI; so records ## may have only the source OAI ID stored in this tag (kind of like ## external system number too). CFG_BIBUPLOAD_EXTERNAL_OAIID_TAG = 035__a ## CFG_BIBUPLOAD_EXTERNAL_OAIID_PROVENANCE_TAG -- where do we store OAI SRC ## tags of harvested records? Useful for matching when we harvest stuff ## via OAI that we do not want to reexport via Invenio OAI; so records ## may have only the source OAI SRC stored in this tag (kind of like ## external system number too). Note that the field should be the same of ## CFG_BIBUPLOAD_EXTERNAL_OAIID_TAG. CFG_BIBUPLOAD_EXTERNAL_OAIID_PROVENANCE_TAG = 035__9 ## CFG_BIBUPLOAD_STRONG_TAGS -- a comma-separated list of tags that ## are strong enough to resist the replace mode. Useful for tags that ## might be created from an external non-metadata-like source, ## e.g. the information about the number of copies left. CFG_BIBUPLOAD_STRONG_TAGS = 964 ## CFG_BIBUPLOAD_CONTROLLED_PROVENANCE_TAGS -- a comma-separated list ## of tags that contain provenance information that should be checked ## in the bibupload correct mode via matching provenance codes. (Only ## field instances of the same provenance information would be acted ## upon.) Please specify the whole tag info up to subfield codes. CFG_BIBUPLOAD_CONTROLLED_PROVENANCE_TAGS = 6531_9 ## CFG_BIBUPLOAD_FFT_ALLOWED_LOCAL_PATHS -- a comma-separated list of system ## paths from which it is allowed to take fulltextes that will be uploaded via ## FFT (CFG_TMPDIR is included by default). CFG_BIBUPLOAD_FFT_ALLOWED_LOCAL_PATHS = /tmp,/home ## CFG_BIBUPLOAD_SERIALIZE_RECORD_STRUCTURE -- do we want to serialize ## internal representation of records (Pythonic record structure) into ## the database? This can improve internal processing speed of some ## operations at the price of somewhat bigger disk space usage. ## If you change this value after some records have already been added ## to your installation, you may want to run: ## $ /opt/invenio/bin/inveniocfg --reset-recstruct-cache ## in order to either erase the cache thus freeing database space, ## or to fill the cache for all records that have not been cached yet. CFG_BIBUPLOAD_SERIALIZE_RECORD_STRUCTURE = 1 ## CFG_BATCHUPLOADER_FILENAME_MATCHING_POLICY -- a comma-separated list ## indicating which fields match the file names of the documents to be ## uploaded. ## The matching will be done in the same order as the list provided. CFG_BATCHUPLOADER_FILENAME_MATCHING_POLICY = reportnumber,recid ## CFG_BATCHUPLOADER_DAEMON_DIR -- Directory where the batchuploader daemon ## will look for the subfolders metadata and document by default. ## If path is relative, CFG_PREFIX will be joined as a prefix CFG_BATCHUPLOADER_DAEMON_DIR = var/batchupload ## CFG_BATCHUPLOADER_WEB_ROBOT_AGENT -- Comma-separated list to specify the ## agents permitted when calling batch uploader web interface ## cdsweb.cern.ch/batchuploader/robotupload ## if using a curl, eg: curl xxx -A invenio_webupload CFG_BATCHUPLOADER_WEB_ROBOT_AGENT = invenio_webupload ## CFG_BATCHUPLOADER_WEB_ROBOT_RIGHTS -- Access list specifying for each ## IP address, which collections are allowed using batch uploader robot ## interface. CFG_BATCHUPLOADER_WEB_ROBOT_RIGHTS = { '10.0.0.1': ['BOOK', 'REPORT'], # Example 1 '10.0.0.2': ['POETRY', 'PREPRINT'], # Example 2 } #################################### ## Part 18: BibCatalog parameters ## #################################### ## EXPERIMENTAL: Please do not use. CFG_BIBCATALOG_SYSTEM = CFG_BIBCATALOG_SYSTEM_RT_CLI = /usr/bin/rt CFG_BIBCATALOG_SYSTEM_RT_URL = http://localhost/rt3 CFG_BIBCATALOG_QUEUES = General #################################### ## Part 19: BibFormat parameters ## #################################### ## CFG_BIBFORMAT_HIDDEN_TAGS -- comma-separated list of MARC tags that ## are not shown to users not having cataloging authorizations. CFG_BIBFORMAT_HIDDEN_TAGS = 595 ########################## ## THAT's ALL, FOLKS! ## ##########################