Diffusion ShoulderDB_ImportSegmentMeasureAnalyze (pezhman_excelExport) Browse

R8218/measureSCase.m
896b29123d60pezhman_excelExport

measureSCase.m
View Options

			function [status,message] = measureSCase(varargin)
			% MEASURESCASE Update the entire SCase DB with anatomical measurements.

			% The function can be run from (lbovenus) server with the following shell command
			% cd /home/shoulder/methods/matlab/database; matlab -nodisplay -nosplash -r "measureSCase;quit"

			% Progress can be checked through log file with following shell command
			% cd /home/shoulder/methods/matlab/database;tail -f log/measureSCase.log

			% It take ~30 min for 700 cases when run from server.
			% After run from server, the output file
			% /shoulder/data/Excel/xlsFromMatlab/anatomy.csv
			% must be open from Excel and saved
			% as xls at the same location. Excel file
			% /shoulder/data/Excel/ShoulderDataBase.xlsx should also be open, updated, and saved.

			% The script measureSCase was replacing 3 previous functions
			% 1) rebuildDatabaseScapulaMeasurements.m --> list of all SCases --> execute scapula_measure.m
			% 2) scapula_measure.m --> execute scapula_calculation and save results in Excel and SQL
			% 3) scapula_calculation.m --> perform anatomical analysis --> results varaiable


			% Input arguments can be one or several among:
			% {Empty,'GlenoidDensity', 'Update', '[NP][1-999]', '[NP]'}
			%
			% If there is no argument the function will measure every new case.
			% The first 'N' or 'P' given as an argument will force the function to be
			% executed on all the corresponding 'N' or 'P' cases. This will overwrite
			% every other ShoulderCase argument '[NP][1-999]' given before and will
			% not take the next arguments into account.
			%
			% Examples:
			% measureSCase('GlenoidDensity')
			% is a valid instruction where every new case is measured
			% including its glenoid density.
			% measureSCase('P400','N520')
			% is a valid instruction where the cases 'P400' and 'N520' are
			% measured only if they have not already been measured yet (new
			% cases).
			% measureSCase('P400','N520','Update')
			% is a valid instruction where the cases 'P400' and 'N520' are
			% measured whether they have already been measured or not.
			% measureSCase('GlenoidDensity','P400','N520','P','Update')
			% is a valid instruction where all the 'P' cases are measured
			% including their glenoid density only if they have not been
			% measured yet (new P cases).
			% measureSCase('GlenoidDensity','P400','N520','Update','P')
			% is a valid instruction where all the 'P' cases are measured
			% including their glenoid density whether they have been
			% measured or not.
			% measureSCase('Z1590','trollingArgumentLol')
			% is a valid instruction which raises a warning about the
			% arguments and will result in the same as executing
			% measureSCase() i.e. every new case is calculated.

			% Output
			% File /shoulder/data/Excel/xlsFromMatlab/anatomy.csv
			% File /shoulder/data/Excel/xlsFromMatlab/anatomy.xls (only windows)
			% File /home/shoulder/data/matlab/SCaseDB.mat
			% File {SCaseId}.mat in each {SCaseId}/{CT}/matlab directory
			% logs in /log/measureSCase.log

			% Example: measureSCase

			% Author: Alexandre Terrier, EPFL-LBO
			% Creation date: 2018-07-01
			% Revision date: 2019-06-29

			% TO DO:
			% Read first last anatomy.csv and/or SCaseDB.mat
			% Fill with patient and clinical data, from excel or MySQL
			% use argument to redo or update
			% Save csv within the main loop (not sure it's a good idea)
			% Add more message in log
			% Add more test to assess validity of data
			% Update MySQL
			% Rename all objects with a capital
			% Make it faster by not loading scapula surface if already in SCaseDB.mat
			% Add argument 'load' to force reload files even if they are alerady in DB
			% Add argument 'measure' to force re-measuring event if measurement is already in DB
			% Add "scapula_addmeasure.m" --> should be coded in ShoulderCase class


			tic; % Start stopwatch timer

			%% Open log file
			logFileID = openLogFile('measureSCase.log');

			%% Set the data directory from the configuration file config.txt
			dataDir = openConfigFile('config.txt', logFileID);

			%% Location of the XLS ShoulderDatabase
			xlsDir = [dataDir '/Excel/xlsFromMatlab'];
			matlabDir = [dataDir '/matlab'];

			%% Get list of all SCase
			% Get list of SCases from varargin

			% Delault value for inputArg
			calcGlenoidDensity = false;
			updateCalculations = false;

			fprintf(logFileID, '\n\nList of SCase');

			cases = {};

			for argument = 1:nargin
			switch varargin{argument} % Test every argument in varargin.
			case 'GlenoidDensity'
			calcGlenoidDensity = true;
			case 'Update'
			updateCalculations = true;
			case regexp(varargin{argument},'[NP]','match') % Detect if argument is 'N' or 'P'.
			cases = {}; % If it's the case the for loop
			cases{end+1} = varargin{argument}; % ends here.
			break %
			case regexp(varargin{argument},'[NP][1-9][0-9]{0,2}','match') % Test for a correct argument [NP][1-999]
			cases{end+1} = varargin{argument}; %
			for element = 1:length(cases)-1 % Check if the case has already been added to the case list before
			if varargin{argument} == cases{element} %
			cases = cases(1:end-1); % Delete the last element added to cases if it is already in the list
			end
			end
			otherwise
			warning(['\n "%s" is not a valid argument and has not been added to the'...
			' list of cases.\n measureSCase arguments format must be "[NP]",'...
			' "[NP][1-999]", "GlenoidDensity", or "Update"'],varargin{argument})
			end
			end

			SCaseList = listSCase(cases);

			%% Load current xls database (for clinical data)
			fprintf(logFileID, '\nLoad xls database');
			addpath('XLS_MySQL_DB');
			filename = [dataDir '/Excel/ShoulderDataBase.xlsx'];
			excelRaw = rawFromExcel(filename); % cell array

			excelSCaseID = excelRaw(2:end, 1);
			excelDiagnosis = excelRaw(2:end, 4);
			excelPatientHeight = excelRaw(2:end, 23);
			excelGlenoidWalch = excelRaw(2:end, 55);


			% Lines below adapted from XLS_MySQL_DB/MainExcel2XLS
			% Excel.diagnosisList = diagnosisListFromExcel(Excel.Raw);
			% Excel.treatmentList = treatmentListFromExcel(Excel.Raw);
			% ExcelData.Patient = patientFromExcel(excelRaw); % Structure with patient data
			% Excel.shoulder = shoulderFromExcel(Excel.patient, Excel.Raw);
			% [Excel.SCase, Excel.diagnosis, Excel.treatment, Excel.outcome, Excel.study] = SCaseFromExcel(...
			% Excel.shoulder, Excel.patient, Excel.diagnosisList, Excel.treatmentList, Excel.Raw);
			% fprintf(logFileID, ': OK');

			%% Add path to ShoulderCase class
			addpath('ShoulderCase');

			%% Instance of a ShoulderCase object
			if (exist('SCase','var') > 0)
			clear SCase; % Check for delete method
			end
			SCase = ShoulderCase; % Instanciate a ShoulderCase object
			SCaseDB = ShoulderCase;
			SCase.dataPath = dataDir; % Set dataDir for SCase

			%% Start loop over SCases in SCaseList
			nSCase = length(SCaseList); % Number of SCases
			for iSCaseID = 1:nSCase
			SCaseID = SCaseList(iSCaseID).id;
			SCase(iSCaseID).id = SCaseID;
			SCase(iSCaseID).dataPath = dataDir; % Set dataDir for SCase
			percentProgress = num2str(iSCaseID/nSCase*100, '%3.1f');
			fprintf(logFileID, ['\n\nSCaseID: ' SCaseID ' (' percentProgress '%%)']);

			% There are 3 parts within this SCase loop:
			% 1) Load & analyses manual data from amira
			% 2) Load & analyses auto data from matlab (Statistical Shape Model)
			% 3) Load clinical data from Excel database, and set them to SCase
			% 4) Save SCase in file SCaseID/matlab/SCase.mat

			% 1) Load & analyses manual data from amira

			if (~exist([SCase(iSCaseID).dataMatlabPath '\SCase.mat'],'file') \|\| updateCalculations) % New calculation of SCase.mat or update the current calculation
			fprintf(logFileID, '\n Segmentation manual ');
			output = SCase(iSCaseID).path; % Set data path of this SCase
			if output % Continue if amira dir exists in SCase
			fprintf(logFileID, '\n Load scapula surface and landmarks');
			output = SCase(iSCaseID).shoulder.scapula.load;
			if output
			fprintf(logFileID, ': OK');
			fprintf(logFileID, '\n Set coord. syst.');
			output = SCase(iSCaseID).shoulder.scapula.coordSysSet;
			if output
			fprintf(logFileID, ': OK');
			fprintf(logFileID, '\n Load glenoid surface');
			output = SCase(iSCaseID).shoulder.scapula.glenoid.load;
			if output
			fprintf(logFileID, ': OK');
			fprintf(logFileID, '\n Measure glenoid anatomy');
			output = SCase(iSCaseID).shoulder.scapula.glenoid.morphology;
			if output
			fprintf(logFileID, ': OK');
			if calcGlenoidDensity
			fprintf(logFileID, '\n Measure glenoid density');
			output = SCase(iSCaseID).shoulder.scapula.glenoid.calcDensity;
			if output
			fprintf(logFileID, ': OK');
			else
			fprintf(logFileID, ': Could no read dicom');
			end
			end
			fprintf(logFileID, '\n Load humerus data');
			output = SCase(iSCaseID).shoulder.humerus.load;
			if output
			fprintf(logFileID, ': OK');
			fprintf(logFileID, '\n Measure humerus subluxation');
			output = SCase(iSCaseID).shoulder.humerus.subluxation;
			if output
			fprintf(logFileID, ': OK');
			fprintf(logFileID, '\n Measure acromion anatomy');
			% Should be run after SCase.shoulder.humerus (for AI)
			output = SCase(iSCaseID).shoulder.scapula.acromion.morphology;
			if output
			fprintf(logFileID, ': OK');
			else
			fprintf(logFileID, '\n: Measure acromion anatomy error');
			end % Acromion anatomy
			else
			fprintf(logFileID, '\n: Measure humerus subluxation error');
			end % Subluxation humerus
			else
			fprintf(logFileID, '\n: Load humerus data error');
			end % Load humerus
			else
			fprintf(logFileID, '\n: Measure glenoid anatomy error');
			end % Anatomy glenoid
			else
			fprintf(logFileID, '\n: Density calculus error');
			end % Load glenoid
			else
			fprintf(logFileID, '\n Scapula coord syst error ');
			end % Set coord. syst.

			else
			fprintf(logFileID, '\n Scapula loading error');
			end % Load scapula

			else
			fprintf(logFileID, '\n No amira folder');
			end % Amira path exist
			end
			% 2) Load & analyses auto data from matlab (Statistical Shape Model)
			fprintf(logFileID, '\n Segmentation auto ');
			% Load scapula surface and landmarks
			fprintf(logFileID, '\n Load scapula surface and landmarks');
			output = SCase(iSCaseID).shoulder.scapulaAuto.loadAuto; % Load auto data from matlab directory
			if output
			fprintf(logFileID, ': OK');
			fprintf(logFileID, '\n Set coord. syst.');
			output = SCase(iSCaseID).shoulder.scapulaAuto.coordSysSet;
			if output
			fprintf(logFileID, ': OK');
			fprintf(logFileID, '\n Load glenoid surface');
			output = SCase(iSCaseID).shoulder.scapulaAuto.glenoid.loadAuto;
			if output
			fprintf(logFileID, ': OK');
			fprintf(logFileID, '\n Measure glenoid anatomy');
			output = SCase(iSCaseID).shoulder.scapulaAuto.glenoid.morphology;
			if output
			fprintf(logFileID, ': OK');
			else
			fprintf(logFileID, '\n: Error in measuring glenoid anatomy');
			end
			else
			fprintf(logFileID, '\n: Error in loading glenoid surface');
			end
			else
			fprintf(logFileID, '\n: Error in setting the coordonnate System');
			end
			else
			fprintf(logFileID, '\n: Error in loading scapula surface and landmarks');
			end

			% 3) Set clinical data from Excel database to SCase
			fprintf(logFileID, '\n Set clinical data from Excel');

			% Get idx of excelRaw for SCaseID
			% Use cell2struct when dots are removed from excel headers
			idx = find(strcmp(excelRaw, SCaseID)); % Index of SCaseID in excelRaw
			SCase(iSCaseID).diagnosis = excelRaw{idx,4};
			SCase(iSCaseID).treatment = excelRaw{idx,9};
			SCase(iSCaseID).patient.gender = excelRaw{idx,19};
			SCase(iSCaseID).patient.age = excelRaw{idx,21};
			SCase(iSCaseID).patient.height = excelRaw{idx,23};
			SCase(iSCaseID).patient.weight = excelRaw{idx,24};
			SCase(iSCaseID).patient.BMI = excelRaw{idx,25};
			SCase(iSCaseID).shoulder.scapula.glenoid.walch = excelRaw{idx,55};


			% Patient data --> TO DO
			% find patient id (in SQL) corresponding to iSCaseID
			%
			%
			% idxSCase = find(contains(ExcelData, SCaseID));
			% SCase(iSCaseID).patient.id = ExcelData(idxSCase).patient.patient_id; % SQL patient id
			% SCase(iSCaseID).patient.idMed = ExcelData(idxSCase).patient.IPP; % IPP to be replace by coded (anonymized) IPP from SecuTrial
			% SCase(iSCaseID).patient.gender = ExcelData(idxSCase).patient.gender;
			% SCase(iSCaseID).patient.age = []; % Age (years) at treatment, or preop CT (we might also add birthdate wi day et at 15 of the month)
			% SCase(iSCaseID).patient.ethnicity = ExcelData(idxSCase).patient.IPP;
			% SCase(iSCaseID).patient.weight = ExcelData(idxSCase).patient.weight;
			% SCase(iSCaseID).patient.height = ExcelData(idxSCase).patient.height;
			% SCase(iSCaseID).patient.BMI = ExcelData(idxSCase).pateint.BMI;
			% SCase(iSCaseID).patient.comment = ExcelData(idxSCase).patient.comment;

			% 4) Save SCase in file SCaseID/matlab/SCase.mat
			fprintf(logFileID, '\n Save SCase');
			output = SCase(iSCaseID).saveMatlab;
			if output
			fprintf(logFileID, ': OK');
			else
			fprintf(logFileID, ': Error');
			end
			end % End of loop on SCaseList

			%% Write csv file
			% This might be a function (SCase.csvSave()). The input would be a filename and a structure
			% data


			% Replace header and data by structure. Currently not working
			%{
			txtFilename = [xlsDir, '/anatomy.txt']; % Name of the txt file

			DataStruc = struc(...
			'SCase_id', SCase.id, ...
			'shoulder_side', SCase.shoulder.side,...
			'glenoid_radius', SCase.shoulder.scapula.glenoid.radius,...
			'glenoid_sphereRMSE', SCase.shoulder.scapula.glenoid.sphereRMSE,...
			'glenoid_depth', SCase.shoulder.scapula.glenoid.depth,...
			'glenoid_width', SCase.shoulder.scapula.glenoid.width,...
			'glenoid_height', SCase.shoulder.scapula.glenoid.height,...
			'glenoid_centerPA', SCase.shoulder.scapula.glenoid.centerLocal(1),...
			'glenoid_centerIS', SCase.shoulder.scapula.glenoid.centerLocal(2),...
			'glenoid_centerML', SCase.shoulder.scapula.glenoid.centerLocal(3),...
			'glenoid_versionAmpl', SCase.shoulder.scapula.glenoid.versionAmpl,...
			'glenoid_versionOrient', SCase.shoulder.scapula.glenoid.versionOrient,...
			'glenoid_version', SCase.shoulder.scapula.glenoid.version,...
			'glenoid_inclination', SCase.shoulder.scapula.glenoid.inclination,...
			'humerus_jointRadius', SCase.shoulder.humerus.jointRadius,...
			'humerus_headRadius', SCase.shoulder.humerus.radius,...
			'humerus_GHSAmpl', SCase.shoulder.humerus.GHSAmpl,...
			'humerus_GHSOrient', SCase.shoulder.humerus.GHSOrient,...
			'humerus_SHSAmpl', SCase.shoulder.humerus.SHSAmpl,...
			'humerus_SHSOrient', SCase.shoulder.humerus.SHSOrient,...
			'humerus_SHSAngle', SCase.shoulder.humerus.SHSAngle,...
			'humerus_SHSPA', SCase.shoulder.humerus.SHSPA,...
			'humerus_SHSIS', SCase.shoulder.humerus.SHSIS,...
			'acromion_AI', SCase.shoulder.scapula.acromion.AI,...
			'acromion_CSA', SCase.shoulder.scapula.acromion.CSA,...
			'acromion_PS', SCase.shoulder.scapula.acromion.PS...
			);
			DataTable = strct2table(Data);
			writetable(DataTable,filename);
			%}

			% Header of the csv file

			dataHeader = [...
			'SCase_id;' ...
			'shoulder_side;' ...
			'glenoid_radius;' ...
			'glenoid_sphereRMSE;' ...
			'glenoid_depth;' ...
			'glenoid_width;' ...
			'glenoid_height;' ...
			'glenoid_centerPA;' ...
			'glenoid_centerIS;' ...
			'glenoid_centerML;' ...
			'glenoid_versionAmpl;' ...
			'glenoid_versionOrient;' ...
			'glenoid_version;' ...
			'glenoid_inclination;' ...
			'humerus_jointRadius;' ...
			'humerus_headRadius;' ...
			'humerus_GHSAmpl;' ...
			'humerus_GHSOrient;' ...
			'humerus_SHSAmpl;' ...
			'humerus_SHSOrient;' ...
			'humerus_SHSAngle;' ...
			'humerus_SHSPA;' ...
			'humerus_SHSIS;' ...
			'acromion_AI;' ...
			'acromion_CSA;' ...
			'acromion_PSA;'...
			'acromion_AAA\n'...
			];


			updateList = listSCase; % The list of SCase to use to construct anatomy.csv and SCaseDB.mat

			fprintf(logFileID, '\n\nSave anatomy.csv file');
			fid = fopen([xlsDir, '/anatomy.csv'],'w'); %Last csv is deleted and a new one, updated is being created
			fprintf(fid,dataHeader);
			fclose(fid);

			% The following lines re-create the SCaseDB.mat and contruct the anatomy.csv file

			S = ShoulderCase;
			for Case=1:length(updateList)
			S(Case).id = updateList(Case).id; %
			S(Case).dataPath = dataDir; %
			S(Case).path; % Compute the SCase.dataMatlabPath

			loaded = load([S(Case).dataMatlabPath '/SCase.mat']); % Load SCase.mat
			SCaseDB(Case) = loaded.SCase;
			SCaseDB(Case).appendToCSV('anatomy.csv');
			end

			fprintf(logFileID, ': OK');

			%% Save the entire SCaseDB array as a matlab file
			fprintf(logFileID, '\n\nSave SCase database');
			filename = 'SCaseDB';
			filename = [matlabDir '/' filename '.mat'];
			try
			save(filename, 'SCaseDB');
			fprintf(logFileID, ': OK');
			catch
			fprintf(logFileID, ': Error');
			end

			%fprintf(logFileID, [': ' csvFilename]);

			%% Write xls file (Windows only)
			% [~,message] = csv2xlsSCase(csvFilename);
			% fprintf(logFileID, message);

			% If run from non-windows system, only csv will be produced. The xls can be
			% produced by opening the csv from Excel and save as xls.
			% Could be a function with 1 input (cvsFilenames



			%{
			xlsFilename = strrep(csvFilename, '.csv', '.xls'); % Replace .csv by .xls
			if ispc % Check if run from windows!
			% Read cvs file as table and write the table as xls
			cvsTable = readtable(csvFilename); % Get table from csv (only way to read non-numeric data)
			cvsCell = table2cell(cvsTable); % Tranform table cell array
			dataHeader = cvsTable.Properties.VariableNames; % Get header
			cvsCell = [dataHeader; cvsCell]; % Add header

			sheet = 'anatomy'; % Sheet name of the xls file

			[status,message] = xlswrite(xlsFilename, cvsCell, sheet); % Save xls
			if status
			fprintf(logFileId, ['\nSaved ' xlsFilename]);
			else
			fprintf(logFileId, ['\nCould not save ' xlsFilename]);
			fprintf(logFileId, ['\n' message.identifier]);
			fprintf(logFileId, ['\n' message.message]);
			end
			else
			fprintf(logFileId, ['\n' xlsFilename ' not saved. Open and save as xls from Excel']);
			end
			%}


			%% Close log file
			fprintf(logFileID, '\n\nSCase measured: %s', num2str(length(SCaseList))); % Number of SCases measured
			fprintf(logFileID, '\nElapsed time (s): %s', num2str(toc)); % stopwatch timer
			fprintf(logFileID, '\n');
			fclose(logFileID); % Close log file

			%% Output of the SCase if required by argument
			% SCase.output % inputArg = abaqus/density/references/

			% update mySQL
			% SCase.sqlSave


			status = 1;
			message = 'OK';

			end

R8218/measureSCase.m896b29123d60pezhman_excelExport

measureSCase.mView Options

R8218/measureSCase.m
896b29123d60pezhman_excelExport

measureSCase.m
View Options