Diffusion akantu (bugfixes/39-the-python-example-for-phasefield-are-broken-due-to-a-change-to-setintegrationscheme) Browse

39-the-python…

Last Change

Raw File

akantu.dox.in
View Options

			# Doxyfile 1.7.6.1

			# This file describes the settings to be used by the documentation system
			# doxygen (www.doxygen.org) for a project
			#
			# All text after a hash (#) is considered a comment and will be ignored
			# The format is:
			# TAG = value [value, ...]
			# For lists items can also be appended using:
			# TAG += value [value, ...]
			# Values that contain spaces should be placed between quotes (" ")

			#---------------------------------------------------------------------------
			# Project related configuration options
			#---------------------------------------------------------------------------

			# This tag specifies the encoding used for all characters in the config file
			# that follow. The default is UTF-8 which is also the encoding used for all
			# text before the first occurrence of this tag. Doxygen uses libiconv (or the
			# iconv built into libc) for the transcoding. See
			# http://www.gnu.org/software/libiconv for the list of possible encodings.

			DOXYFILE_ENCODING = UTF-8

			# The PROJECT_NAME tag is a single word (or sequence of words) that should
			# identify the project. Note that if you do not use Doxywizard you need
			# to put quotes around the project name if it contains spaces.

			PROJECT_NAME = @CMAKE_PROJECT_NAME@

			# The PROJECT_NUMBER tag can be used to enter a project or revision number.
			# This could be handy for archiving the generated documentation or
			# if some version control system is used.

			PROJECT_NUMBER = @AKANTU_VERSION@

			# Using the PROJECT_BRIEF tag one can provide an optional one line description
			# for a project that appears at the top of each page and should give viewer
			# a quick idea about the purpose of the project. Keep the description short.

			PROJECT_BRIEF =

			# With the PROJECT_LOGO tag one can specify an logo or icon that is
			# included in the documentation. The maximum height of the logo should not
			# exceed 55 pixels and the maximum width should not exceed 200 pixels.
			# Doxygen will copy the logo to the output directory.

			PROJECT_LOGO =

			# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
			# base path where the generated documentation will be put.
			# If a relative path is entered, it will be relative to the location
			# where doxygen was started. If left blank the current directory will be used.

			OUTPUT_DIRECTORY = .

			# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
			# 4096 sub-directories (in 2 levels) under the output directory of each output
			# format and will distribute the generated files over these directories.
			# Enabling this option can be useful when feeding doxygen a huge amount of
			# source files, where putting all generated files in the same directory would
			# otherwise cause performance problems for the file system.

			CREATE_SUBDIRS = NO

			# The OUTPUT_LANGUAGE tag is used to specify the language in which all
			# documentation generated by doxygen is written. Doxygen will use this
			# information to generate all constant output in the proper language.
			# The default language is English, other supported languages are:
			# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
			# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
			# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
			# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
			# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
			# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.

			OUTPUT_LANGUAGE = English

			# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
			# include brief member descriptions after the members that are listed in
			# the file and class documentation (similar to JavaDoc).
			# Set to NO to disable this.

			BRIEF_MEMBER_DESC = YES

			# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
			# the brief description of a member or function before the detailed description.
			# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
			# brief descriptions will be completely suppressed.

			REPEAT_BRIEF = YES

			# This tag implements a quasi-intelligent brief description abbreviator
			# that is used to form the text in various listings. Each string
			# in this list, if found as the leading text of the brief description, will be
			# stripped from the text and the result after processing the whole list, is
			# used as the annotated text. Otherwise, the brief description is used as-is.
			# If left blank, the following values are used ("$name" is automatically
			# replaced with the name of the entity): "The $name class" "The $name widget"
			# "The $name file" "is" "provides" "specifies" "contains"
			# "represents" "a" "an" "the"

			ABBREVIATE_BRIEF = "The $name class" \
			"The $name widget" \
			"The $name file" \
			is \
			provides \
			specifies \
			contains \
			represents \
			a \
			an \
			the

			# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
			# Doxygen will generate a detailed section even if there is only a brief
			# description.

			ALWAYS_DETAILED_SEC = NO

			# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
			# inherited members of a class in the documentation of that class as if those
			# members were ordinary class members. Constructors, destructors and assignment
			# operators of the base classes will not be shown.

			INLINE_INHERITED_MEMB = NO

			# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
			# path before files name in the file list and in the header files. If set
			# to NO the shortest path that makes the file name unique will be used.

			FULL_PATH_NAMES = YES

			# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
			# can be used to strip a user-defined part of the path. Stripping is
			# only done if one of the specified strings matches the left-hand part of
			# the path. The tag can be used to show relative paths in the file list.
			# If left blank the directory from which doxygen is run is used as the
			# path to strip.

			STRIP_FROM_PATH = @CMAKE_SOURCE_DIR@

			# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
			# the path mentioned in the documentation of a class, which tells
			# the reader which header file to include in order to use a class.
			# If left blank only the name of the header file containing the class
			# definition is used. Otherwise one should specify the include paths that
			# are normally passed to the compiler using the -I flag.

			STRIP_FROM_INC_PATH = @CMAKE_SOURCE_DIR@

			# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
			# (but less readable) file names. This can be useful if your file system
			# doesn't support long names like on DOS, Mac, or CD-ROM.

			SHORT_NAMES = NO

			# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
			# will interpret the first line (until the first dot) of a JavaDoc-style
			# comment as the brief description. If set to NO, the JavaDoc
			# comments will behave just like regular Qt-style comments
			# (thus requiring an explicit @brief command for a brief description.)

			JAVADOC_AUTOBRIEF = NO

			# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
			# interpret the first line (until the first dot) of a Qt-style
			# comment as the brief description. If set to NO, the comments
			# will behave just like regular Qt-style comments (thus requiring
			# an explicit \brief command for a brief description.)

			QT_AUTOBRIEF = NO

			# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
			# treat a multi-line C++ special comment block (i.e. a block of //! or ///
			# comments) as a brief description. This used to be the default behaviour.
			# The new default is to treat a multi-line C++ comment block as a detailed
			# description. Set this tag to YES if you prefer the old behaviour instead.

			MULTILINE_CPP_IS_BRIEF = NO

			# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
			# member inherits the documentation from any documented member that it
			# re-implements.

			INHERIT_DOCS = YES

			# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
			# a new page for each member. If set to NO, the documentation of a member will
			# be part of the file/class/namespace that contains it.

			SEPARATE_MEMBER_PAGES = NO

			# The TAB_SIZE tag can be used to set the number of spaces in a tab.
			# Doxygen uses this value to replace tabs by spaces in code fragments.

			TAB_SIZE = 4

			# This tag can be used to specify a number of aliases that acts
			# as commands in the documentation. An alias has the form "name=value".
			# For example adding "sideeffect=\par Side Effects:\n" will allow you to
			# put the command \sideeffect (or @sideeffect) in the documentation, which
			# will result in a user-defined paragraph with heading "Side Effects:".
			# You can put \n's in the value part of an alias to insert newlines.

			ALIASES =

			# This tag can be used to specify a number of word-keyword mappings (TCL only).
			# A mapping has the form "name=value". For example adding
			# "class=itcl::class" will allow you to use the command class in the
			# itcl::class meaning.

			TCL_SUBST =

			# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
			# sources only. Doxygen will then generate output that is more tailored for C.
			# For instance, some of the names that are used will be different. The list
			# of all members will be omitted, etc.

			OPTIMIZE_OUTPUT_FOR_C = NO

			# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
			# sources only. Doxygen will then generate output that is more tailored for
			# Java. For instance, namespaces will be presented as packages, qualified
			# scopes will look different, etc.

			OPTIMIZE_OUTPUT_JAVA = NO

			# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
			# sources only. Doxygen will then generate output that is more tailored for
			# Fortran.

			OPTIMIZE_FOR_FORTRAN = NO

			# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
			# sources. Doxygen will then generate output that is tailored for
			# VHDL.

			OPTIMIZE_OUTPUT_VHDL = NO

			# Doxygen selects the parser to use depending on the extension of the files it
			# parses. With this tag you can assign which parser to use for a given extension.
			# Doxygen has a built-in mapping, but you can override or extend it using this
			# tag. The format is ext=language, where ext is a file extension, and language
			# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
			# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
			# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
			# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
			# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.

			EXTENSION_MAPPING =

			# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
			# to include (a tag file for) the STL sources as input, then you should
			# set this tag to YES in order to let doxygen match functions declarations and
			# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
			# func(std::string) {}). This also makes the inheritance and collaboration
			# diagrams that involve STL classes more complete and accurate.

			BUILTIN_STL_SUPPORT = NO

			# If you use Microsoft's C++/CLI language, you should set this option to YES to
			# enable parsing support.

			CPP_CLI_SUPPORT = NO

			# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
			# Doxygen will parse them like normal C++ but will assume all classes use public
			# instead of private inheritance when no explicit protection keyword is present.

			SIP_SUPPORT = NO

			# For Microsoft's IDL there are propget and propput attributes to indicate getter
			# and setter methods for a property. Setting this option to YES (the default)
			# will make doxygen replace the get and set methods by a property in the
			# documentation. This will only work if the methods are indeed getting or
			# setting a simple type. If this is not the case, or you want to show the
			# methods anyway, you should set this option to NO.

			IDL_PROPERTY_SUPPORT = YES

			# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
			# tag is set to YES, then doxygen will reuse the documentation of the first
			# member in the group (if any) for the other members of the group. By default
			# all members of a group must be documented explicitly.

			DISTRIBUTE_GROUP_DOC = NO

			# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
			# the same type (for instance a group of public functions) to be put as a
			# subgroup of that type (e.g. under the Public Functions section). Set it to
			# NO to prevent subgrouping. Alternatively, this can be done per class using
			# the \nosubgrouping command.

			SUBGROUPING = YES

			# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
			# unions are shown inside the group in which they are included (e.g. using
			# @ingroup) instead of on a separate page (for HTML and Man pages) or
			# section (for LaTeX and RTF).

			INLINE_GROUPED_CLASSES = NO

			# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
			# unions with only public data fields will be shown inline in the documentation
			# of the scope in which they are defined (i.e. file, namespace, or group
			# documentation), provided this scope is documented. If set to NO (the default),
			# structs, classes, and unions are shown on a separate page (for HTML and Man
			# pages) or section (for LaTeX and RTF).

			INLINE_SIMPLE_STRUCTS = NO

			# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
			# is documented as struct, union, or enum with the name of the typedef. So
			# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
			# with name TypeT. When disabled the typedef will appear as a member of a file,
			# namespace, or class. And the struct will be named TypeS. This can typically
			# be useful for C code in case the coding convention dictates that all compound
			# types are typedef'ed and only the typedef is referenced, never the tag name.

			TYPEDEF_HIDES_STRUCT = NO

			# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be
			# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
			# their name and scope. Since this can be an expensive process and often the
			# same symbol appear multiple times in the code, doxygen keeps a cache of
			# pre-resolved symbols. If the cache is too small doxygen will become slower.
			# If the cache is too large, memory is wasted. The cache size is given by this
			# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0,
			# corresponding to a cache size of 2^16 = 65536 symbols.

			LOOKUP_CACHE_SIZE = 0

			#---------------------------------------------------------------------------
			# Build related configuration options
			#---------------------------------------------------------------------------

			# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
			# documentation are documented, even if no documentation was available.
			# Private class members and static file members will be hidden unless
			# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES

			EXTRACT_ALL = NO

			# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
			# will be included in the documentation.

			EXTRACT_PRIVATE = NO

			# If the EXTRACT_STATIC tag is set to YES all static members of a file
			# will be included in the documentation.

			EXTRACT_STATIC = NO

			# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
			# defined locally in source files will be included in the documentation.
			# If set to NO only classes defined in header files are included.

			EXTRACT_LOCAL_CLASSES = YES

			# This flag is only useful for Objective-C code. When set to YES local
			# methods, which are defined in the implementation section but not in
			# the interface are included in the documentation.
			# If set to NO (the default) only methods in the interface are included.

			EXTRACT_LOCAL_METHODS = NO

			# If this flag is set to YES, the members of anonymous namespaces will be
			# extracted and appear in the documentation as a namespace called
			# 'anonymous_namespace{file}', where file will be replaced with the base
			# name of the file that contains the anonymous namespace. By default
			# anonymous namespaces are hidden.

			EXTRACT_ANON_NSPACES = NO

			# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
			# undocumented members of documented classes, files or namespaces.
			# If set to NO (the default) these members will be included in the
			# various overviews, but no documentation section is generated.
			# This option has no effect if EXTRACT_ALL is enabled.

			HIDE_UNDOC_MEMBERS = NO

			# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
			# undocumented classes that are normally visible in the class hierarchy.
			# If set to NO (the default) these classes will be included in the various
			# overviews. This option has no effect if EXTRACT_ALL is enabled.

			HIDE_UNDOC_CLASSES = NO

			# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
			# friend (class\|struct\|union) declarations.
			# If set to NO (the default) these declarations will be included in the
			# documentation.

			HIDE_FRIEND_COMPOUNDS = NO

			# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
			# documentation blocks found inside the body of a function.
			# If set to NO (the default) these blocks will be appended to the
			# function's detailed documentation block.

			HIDE_IN_BODY_DOCS = NO

			# The INTERNAL_DOCS tag determines if documentation
			# that is typed after a \internal command is included. If the tag is set
			# to NO (the default) then the documentation will be excluded.
			# Set it to YES to include the internal documentation.

			INTERNAL_DOCS = NO

			# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
			# file names in lower-case letters. If set to YES upper-case letters are also
			# allowed. This is useful if you have classes or files whose names only differ
			# in case and if your file system supports case sensitive file names. Windows
			# and Mac users are advised to set this option to NO.

			CASE_SENSE_NAMES = NO

			# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
			# will show members with their full class and namespace scopes in the
			# documentation. If set to YES the scope will be hidden.

			HIDE_SCOPE_NAMES = NO

			# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
			# will put a list of the files that are included by a file in the documentation
			# of that file.

			SHOW_INCLUDE_FILES = YES

			# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
			# will list include files with double quotes in the documentation
			# rather than with sharp brackets.

			FORCE_LOCAL_INCLUDES = NO

			# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
			# is inserted in the documentation for inline members.

			INLINE_INFO = YES

			# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
			# will sort the (detailed) documentation of file and class members
			# alphabetically by member name. If set to NO the members will appear in
			# declaration order.

			SORT_MEMBER_DOCS = YES

			# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
			# brief documentation of file, namespace and class members alphabetically
			# by member name. If set to NO (the default) the members will appear in
			# declaration order.

			SORT_BRIEF_DOCS = NO

			# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
			# will sort the (brief and detailed) documentation of class members so that
			# constructors and destructors are listed first. If set to NO (the default)
			# the constructors will appear in the respective orders defined by
			# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
			# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
			# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.

			SORT_MEMBERS_CTORS_1ST = NO

			# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
			# hierarchy of group names into alphabetical order. If set to NO (the default)
			# the group names will appear in their defined order.

			SORT_GROUP_NAMES = NO

			# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
			# sorted by fully-qualified names, including namespaces. If set to
			# NO (the default), the class list will be sorted only by class name,
			# not including the namespace part.
			# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
			# Note: This option applies only to the class list, not to the
			# alphabetical list.

			SORT_BY_SCOPE_NAME = NO

			# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
			# do proper type resolution of all parameters of a function it will reject a
			# match between the prototype and the implementation of a member function even
			# if there is only one candidate or it is obvious which candidate to choose
			# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
			# will still accept a match between prototype and implementation in such cases.

			STRICT_PROTO_MATCHING = NO

			# The GENERATE_TODOLIST tag can be used to enable (YES) or
			# disable (NO) the todo list. This list is created by putting \todo
			# commands in the documentation.

			GENERATE_TODOLIST = YES

			# The GENERATE_TESTLIST tag can be used to enable (YES) or
			# disable (NO) the test list. This list is created by putting \test
			# commands in the documentation.

			GENERATE_TESTLIST = YES

			# The GENERATE_BUGLIST tag can be used to enable (YES) or
			# disable (NO) the bug list. This list is created by putting \bug
			# commands in the documentation.

			GENERATE_BUGLIST = YES

			# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
			# disable (NO) the deprecated list. This list is created by putting
			# \deprecated commands in the documentation.

			GENERATE_DEPRECATEDLIST= YES

			# The ENABLED_SECTIONS tag can be used to enable conditional
			# documentation sections, marked by \if sectionname ... \endif.

			ENABLED_SECTIONS =

			# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
			# the initial value of a variable or macro consists of for it to appear in
			# the documentation. If the initializer consists of more lines than specified
			# here it will be hidden. Use a value of 0 to hide initializers completely.
			# The appearance of the initializer of individual variables and macros in the
			# documentation can be controlled using \showinitializer or \hideinitializer
			# command in the documentation regardless of this setting.

			MAX_INITIALIZER_LINES = 30

			# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
			# at the bottom of the documentation of classes and structs. If set to YES the
			# list will mention the files that were used to generate the documentation.

			SHOW_USED_FILES = YES

			# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
			# This will remove the Files entry from the Quick Index and from the
			# Folder Tree View (if specified). The default is YES.

			SHOW_FILES = YES

			# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
			# Namespaces page. This will remove the Namespaces entry from the Quick Index
			# and from the Folder Tree View (if specified). The default is YES.

			SHOW_NAMESPACES = YES

			# The FILE_VERSION_FILTER tag can be used to specify a program or script that
			# doxygen should invoke to get the current version for each file (typically from
			# the version control system). Doxygen will invoke the program by executing (via
			# popen()) the command <command> <input-file>, where <command> is the value of
			# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
			# provided by doxygen. Whatever the program writes to standard output
			# is used as the file version. See the manual for examples.

			FILE_VERSION_FILTER =

			# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
			# by doxygen. The layout file controls the global structure of the generated
			# output files in an output format independent way. The create the layout file
			# that represents doxygen's defaults, run doxygen with the -l option.
			# You can optionally specify a file name after the option, if omitted
			# DoxygenLayout.xml will be used as the name of the layout file.

			LAYOUT_FILE =

			# The CITE_BIB_FILES tag can be used to specify one or more bib files
			# containing the references data. This must be a list of .bib files. The
			# .bib extension is automatically appended if omitted. Using this command
			# requires the bibtex tool to be installed. See also
			# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style
			# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this
			# feature you need bibtex and perl available in the search path.

			CITE_BIB_FILES =

			#---------------------------------------------------------------------------
			# configuration options related to warning and progress messages
			#---------------------------------------------------------------------------

			# The QUIET tag can be used to turn on/off the messages that are generated
			# by doxygen. Possible values are YES and NO. If left blank NO is used.

			QUIET = YES

			# The WARNINGS tag can be used to turn on/off the warning messages that are
			# generated by doxygen. Possible values are YES and NO. If left blank
			# NO is used.

			WARNINGS = NO

			# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
			# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
			# automatically be disabled.

			WARN_IF_UNDOCUMENTED = NO

			# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
			# potential errors in the documentation, such as not documenting some
			# parameters in a documented function, or documenting parameters that
			# don't exist or using markup commands wrongly.

			WARN_IF_DOC_ERROR = NO

			# The WARN_NO_PARAMDOC option can be enabled to get warnings for
			# functions that are documented, but have no documentation for their parameters
			# or return value. If set to NO (the default) doxygen will only warn about
			# wrong or incomplete parameter documentation, but not about the absence of
			# documentation.

			WARN_NO_PARAMDOC = NO

			# The WARN_FORMAT tag determines the format of the warning messages that
			# doxygen can produce. The string should contain the $file, $line, and $text
			# tags, which will be replaced by the file and line number from which the
			# warning originated and the warning text. Optionally the format may contain
			# $version, which will be replaced by the version of the file (if it could
			# be obtained via FILE_VERSION_FILTER)

			WARN_FORMAT = "$file:$line: $text"

			# The WARN_LOGFILE tag can be used to specify a file to which warning
			# and error messages should be written. If left blank the output is written
			# to stderr.

			WARN_LOGFILE =

			#---------------------------------------------------------------------------
			# configuration options related to the input files
			#---------------------------------------------------------------------------

			# The INPUT tag can be used to specify the files and/or directories that contain
			# documented source files. You may enter file names like "myfile.cpp" or
			# directories like "/usr/src/myproject". Separate the files or directories
			# with spaces.

			INPUT = @CMAKE_SOURCE_DIR@/src

			# This tag can be used to specify the character encoding of the source files
			# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
			# also the default input encoding. Doxygen uses libiconv (or the iconv built
			# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
			# the list of possible encodings.

			INPUT_ENCODING = UTF-8

			# If the value of the INPUT tag contains directories, you can use the
			# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
			# and *.h) to filter out the source-files in the directories. If left
			# blank the following patterns are tested:
			# .c .cc .cxx .cpp .c++ .d .java .ii .ixx .ipp .i++ .inl .h .hh
			# .hxx .hpp .h++ .idl .odl .cs .php .php3 .inc .m .mm .dox *.py
			# .f90 .f .for .vhd *.vhdl

			FILE_PATTERNS = *.c \
			*.cc \
			*.cxx \
			*.cpp \
			*.c++ \
			*.d \
			*.java \
			*.ii \
			*.ixx \
			*.ipp \
			*.i++ \
			*.inl \
			*.h \
			*.hh \
			*.hxx \
			*.hpp \
			*.h++ \
			*.idl \
			*.odl \
			*.cs \
			*.php \
			*.php3 \
			*.inc \
			*.m \
			*.mm \
			*.dox \
			*.py \
			*.f90 \
			*.f \
			*.for \
			*.vhd \
			*.vhdl

			# The RECURSIVE tag can be used to turn specify whether or not subdirectories
			# should be searched for input files as well. Possible values are YES and NO.
			# If left blank NO is used.

			RECURSIVE = YES

			# The EXCLUDE tag can be used to specify files and/or directories that should be
			# excluded from the INPUT source files. This way you can easily exclude a
			# subdirectory from a directory tree whose root is specified with the INPUT tag.
			# Note that relative paths are relative to the directory from which doxygen is
			# run.

			EXCLUDE = @CMAKE_SOURCE_DIR@/src/aka_fwd.hh

			# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
			# directories that are symbolic links (a Unix file system feature) are excluded
			# from the input.

			EXCLUDE_SYMLINKS = NO

			# If the value of the INPUT tag contains directories, you can use the
			# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
			# certain files from those directories. Note that the wildcards are matched
			# against the file with absolute path, so to exclude all test directories
			# for example use the pattern /test/

			EXCLUDE_PATTERNS =

			# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
			# (namespaces, classes, functions, etc.) that should be excluded from the
			# output. The symbol name can be a fully qualified name, a word, or if the
			# wildcard * is used, a substring. Examples: ANamespace, AClass,
			# AClass::ANamespace, ANamespace::*Test

			EXCLUDE_SYMBOLS =

			# The EXAMPLE_PATH tag can be used to specify one or more files or
			# directories that contain example code fragments that are included (see
			# the \include command).

			EXAMPLE_PATH = @CMAKE_SOURCE_DIR@/test

			# If the value of the EXAMPLE_PATH tag contains directories, you can use the
			# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
			# and *.h) to filter out the source-files in the directories. If left
			# blank all files are included.

			EXAMPLE_PATTERNS = *

			# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
			# searched for input files to be used with the \include or \dontinclude
			# commands irrespective of the value of the RECURSIVE tag.
			# Possible values are YES and NO. If left blank NO is used.

			EXAMPLE_RECURSIVE = NO

			# The IMAGE_PATH tag can be used to specify one or more files or
			# directories that contain image that are included in the documentation (see
			# the \image command).

			IMAGE_PATH =

			# The INPUT_FILTER tag can be used to specify a program that doxygen should
			# invoke to filter for each input file. Doxygen will invoke the filter program
			# by executing (via popen()) the command <filter> <input-file>, where <filter>
			# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
			# input file. Doxygen will then use the output that the filter program writes
			# to standard output. If FILTER_PATTERNS is specified, this tag will be
			# ignored.

			INPUT_FILTER =

			# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
			# basis. Doxygen will compare the file name with each pattern and apply the
			# filter if there is a match. The filters are a list of the form:
			# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
			# info on how filters are used. If FILTER_PATTERNS is empty or if
			# non of the patterns match the file name, INPUT_FILTER is applied.

			FILTER_PATTERNS =

			# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
			# INPUT_FILTER) will be used to filter the input files when producing source
			# files to browse (i.e. when SOURCE_BROWSER is set to YES).

			FILTER_SOURCE_FILES = NO

			# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
			# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
			# and it is also possible to disable source filtering for a specific pattern
			# using *.ext= (so without naming a filter). This option only has effect when
			# FILTER_SOURCE_FILES is enabled.

			FILTER_SOURCE_PATTERNS =

			#---------------------------------------------------------------------------
			# configuration options related to source browsing
			#---------------------------------------------------------------------------

			# If the SOURCE_BROWSER tag is set to YES then a list of source files will
			# be generated. Documented entities will be cross-referenced with these sources.
			# Note: To get rid of all source code in the generated output, make sure also
			# VERBATIM_HEADERS is set to NO.

			SOURCE_BROWSER = YES

			# Setting the INLINE_SOURCES tag to YES will include the body
			# of functions and classes directly in the documentation.

			INLINE_SOURCES = NO

			# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
			# doxygen to hide any special comment blocks from generated source code
			# fragments. Normal C and C++ comments will always remain visible.

			STRIP_CODE_COMMENTS = YES

			# If the REFERENCED_BY_RELATION tag is set to YES
			# then for each documented function all documented
			# functions referencing it will be listed.

			REFERENCED_BY_RELATION = NO

			# If the REFERENCES_RELATION tag is set to YES
			# then for each documented function all documented entities
			# called/used by that function will be listed.

			REFERENCES_RELATION = NO

			# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
			# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
			# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
			# link to the source code. Otherwise they will link to the documentation.

			REFERENCES_LINK_SOURCE = YES

			# If the USE_HTAGS tag is set to YES then the references to source code
			# will point to the HTML generated by the htags(1) tool instead of doxygen
			# built-in source browser. The htags tool is part of GNU's global source
			# tagging system (see http://www.gnu.org/software/global/global.html). You
			# will need version 4.8.6 or higher.

			USE_HTAGS = NO

			# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
			# will generate a verbatim copy of the header file for each class for
			# which an include is specified. Set to NO to disable this.

			VERBATIM_HEADERS = YES

			#---------------------------------------------------------------------------
			# configuration options related to the alphabetical class index
			#---------------------------------------------------------------------------

			# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
			# of all compounds will be generated. Enable this if the project
			# contains a lot of classes, structs, unions or interfaces.

			ALPHABETICAL_INDEX = YES

			# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
			# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
			# in which this list will be split (can be a number in the range [1..20])

			COLS_IN_ALPHA_INDEX = 5

			# In case all classes in a project start with a common prefix, all
			# classes will be put under the same header in the alphabetical index.
			# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
			# should be ignored while generating the index headers.

			IGNORE_PREFIX =

			#---------------------------------------------------------------------------
			# configuration options related to the HTML output
			#---------------------------------------------------------------------------

			# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
			# generate HTML output.

			GENERATE_HTML = YES

			# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
			# If a relative path is entered the value of OUTPUT_DIRECTORY will be
			# put in front of it. If left blank `html' will be used as the default path.

			HTML_OUTPUT = html

			# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
			# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
			# doxygen will generate files with .html extension.

			HTML_FILE_EXTENSION = .html

			# The HTML_HEADER tag can be used to specify a personal HTML header for
			# each generated HTML page. If it is left blank doxygen will generate a
			# standard header. Note that when using a custom header you are responsible
			# for the proper inclusion of any scripts and style sheets that doxygen
			# needs, which is dependent on the configuration options used.
			# It is advised to generate a default header using "doxygen -w html
			# header.html footer.html stylesheet.css YourConfigFile" and then modify
			# that header. Note that the header is subject to change so you typically
			# have to redo this when upgrading to a newer version of doxygen or when
			# changing the value of configuration settings such as GENERATE_TREEVIEW!

			HTML_HEADER =

			# The HTML_FOOTER tag can be used to specify a personal HTML footer for
			# each generated HTML page. If it is left blank doxygen will generate a
			# standard footer.

			HTML_FOOTER =

			# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
			# style sheet that is used by each HTML page. It can be used to
			# fine-tune the look of the HTML output. If the tag is left blank doxygen
			# will generate a default style sheet. Note that doxygen will try to copy
			# the style sheet file to the HTML output directory, so don't put your own
			# style sheet in the HTML output directory as well, or it will be erased!

			HTML_STYLESHEET =

			# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
			# other source files which should be copied to the HTML output directory. Note
			# that these files will be copied to the base HTML output directory. Use the
			# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
			# files. In the HTML_STYLESHEET file, use the file name only. Also note that
			# the files will be copied as-is; there are no commands or markers available.

			HTML_EXTRA_FILES =

			# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
			# Doxygen will adjust the colors in the style sheet and background images
			# according to this color. Hue is specified as an angle on a colorwheel,
			# see http://en.wikipedia.org/wiki/Hue for more information.
			# For instance the value 0 represents red, 60 is yellow, 120 is green,
			# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
			# The allowed range is 0 to 359.

			HTML_COLORSTYLE_HUE = 220

			# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
			# the colors in the HTML output. For a value of 0 the output will use
			# grayscales only. A value of 255 will produce the most vivid colors.

			HTML_COLORSTYLE_SAT = 100

			# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
			# the luminance component of the colors in the HTML output. Values below
			# 100 gradually make the output lighter, whereas values above 100 make
			# the output darker. The value divided by 100 is the actual gamma applied,
			# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
			# and 100 does not change the gamma.

			HTML_COLORSTYLE_GAMMA = 80

			# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
			# page will contain the date and time when the page was generated. Setting
			# this to NO can help when comparing the output of multiple runs.

			HTML_TIMESTAMP = YES

			# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
			# documentation will contain sections that can be hidden and shown after the
			# page has loaded. For this to work a browser that supports
			# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
			# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).

			HTML_DYNAMIC_SECTIONS = NO

			# If the GENERATE_DOCSET tag is set to YES, additional index files
			# will be generated that can be used as input for Apple's Xcode 3
			# integrated development environment, introduced with OSX 10.5 (Leopard).
			# To create a documentation set, doxygen will generate a Makefile in the
			# HTML output directory. Running make will produce the docset in that
			# directory and running "make install" will install the docset in
			# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
			# it at startup.
			# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
			# for more information.

			GENERATE_DOCSET = NO

			# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
			# feed. A documentation feed provides an umbrella under which multiple
			# documentation sets from a single provider (such as a company or product suite)
			# can be grouped.

			DOCSET_FEEDNAME = "Doxygen generated docs"

			# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
			# should uniquely identify the documentation set bundle. This should be a
			# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
			# will append .docset to the name.

			DOCSET_BUNDLE_ID = org.doxygen.Project

			# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
			# the documentation publisher. This should be a reverse domain-name style
			# string, e.g. com.mycompany.MyDocSet.documentation.

			DOCSET_PUBLISHER_ID = org.doxygen.Publisher

			# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.

			DOCSET_PUBLISHER_NAME = Publisher

			# If the GENERATE_HTMLHELP tag is set to YES, additional index files
			# will be generated that can be used as input for tools like the
			# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
			# of the generated HTML documentation.

			GENERATE_HTMLHELP = NO

			# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
			# be used to specify the file name of the resulting .chm file. You
			# can add a path in front of the file if the result should not be
			# written to the html output directory.

			CHM_FILE =

			# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
			# be used to specify the location (absolute path including file name) of
			# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
			# the HTML help compiler on the generated index.hhp.

			HHC_LOCATION =

			# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
			# controls if a separate .chi index file is generated (YES) or that
			# it should be included in the master .chm file (NO).

			GENERATE_CHI = NO

			# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
			# is used to encode HtmlHelp index (hhk), content (hhc) and project file
			# content.

			CHM_INDEX_ENCODING =

			# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
			# controls whether a binary table of contents is generated (YES) or a
			# normal table of contents (NO) in the .chm file.

			BINARY_TOC = NO

			# The TOC_EXPAND flag can be set to YES to add extra items for group members
			# to the contents of the HTML help documentation and to the tree view.

			TOC_EXPAND = NO

			# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
			# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
			# that can be used as input for Qt's qhelpgenerator to generate a
			# Qt Compressed Help (.qch) of the generated HTML documentation.

			GENERATE_QHP = NO

			# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
			# be used to specify the file name of the resulting .qch file.
			# The path specified is relative to the HTML output folder.

			QCH_FILE =

			# The QHP_NAMESPACE tag specifies the namespace to use when generating
			# Qt Help Project output. For more information please see
			# http://doc.trolltech.com/qthelpproject.html#namespace

			QHP_NAMESPACE = org.doxygen.Project

			# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
			# Qt Help Project output. For more information please see
			# http://doc.trolltech.com/qthelpproject.html#virtual-folders

			QHP_VIRTUAL_FOLDER = doc

			# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
			# add. For more information please see
			# http://doc.trolltech.com/qthelpproject.html#custom-filters

			QHP_CUST_FILTER_NAME =

			# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
			# custom filter to add. For more information please see
			# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
			# Qt Help Project / Custom Filters</a>.

			QHP_CUST_FILTER_ATTRS =

			# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
			# project's
			# filter section matches.
			# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
			# Qt Help Project / Filter Attributes</a>.

			QHP_SECT_FILTER_ATTRS =

			# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
			# be used to specify the location of Qt's qhelpgenerator.
			# If non-empty doxygen will try to run qhelpgenerator on the generated
			# .qhp file.

			QHG_LOCATION =

			# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
			# will be generated, which together with the HTML files, form an Eclipse help
			# plugin. To install this plugin and make it available under the help contents
			# menu in Eclipse, the contents of the directory containing the HTML and XML
			# files needs to be copied into the plugins directory of eclipse. The name of
			# the directory within the plugins directory should be the same as
			# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
			# the help appears.

			GENERATE_ECLIPSEHELP = NO

			# A unique identifier for the eclipse help plugin. When installing the plugin
			# the directory name containing the HTML and XML files should also have
			# this name.

			ECLIPSE_DOC_ID = org.doxygen.Project

			# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs)
			# at top of each HTML page. The value NO (the default) enables the index and
			# the value YES disables it. Since the tabs have the same information as the
			# navigation tree you can set this option to NO if you already set
			# GENERATE_TREEVIEW to YES.

			DISABLE_INDEX = NO

			# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
			# structure should be generated to display hierarchical information.
			# If the tag value is set to YES, a side panel will be generated
			# containing a tree-like index structure (just like the one that
			# is generated for HTML Help). For this to work a browser that supports
			# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
			# Windows users are probably better off using the HTML help feature.
			# Since the tree basically has the same information as the tab index you
			# could consider to set DISABLE_INDEX to NO when enabling this option.

			GENERATE_TREEVIEW = NO

			# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
			# (range [0,1..20]) that doxygen will group on one line in the generated HTML
			# documentation. Note that a value of 0 will completely suppress the enum
			# values from appearing in the overview section.

			ENUM_VALUES_PER_LINE = 4

			# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
			# used to set the initial width (in pixels) of the frame in which the tree
			# is shown.

			TREEVIEW_WIDTH = 250

			# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
			# links to external symbols imported via tag files in a separate window.

			EXT_LINKS_IN_WINDOW = NO

			# Use this tag to change the font size of Latex formulas included
			# as images in the HTML documentation. The default is 10. Note that
			# when you change the font size after a successful doxygen run you need
			# to manually remove any form_*.png images from the HTML output directory
			# to force them to be regenerated.

			FORMULA_FONTSIZE = 10

			# Use the FORMULA_TRANPARENT tag to determine whether or not the images
			# generated for formulas are transparent PNGs. Transparent PNGs are
			# not supported properly for IE 6.0, but are supported on all modern browsers.
			# Note that when changing this option you need to delete any form_*.png files
			# in the HTML output before the changes have effect.

			FORMULA_TRANSPARENT = YES

			# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
			# (see http://www.mathjax.org) which uses client side Javascript for the
			# rendering instead of using prerendered bitmaps. Use this if you do not
			# have LaTeX installed or if you want to formulas look prettier in the HTML
			# output. When enabled you also need to install MathJax separately and
			# configure the path to it using the MATHJAX_RELPATH option.

			USE_MATHJAX = NO

			# When MathJax is enabled you need to specify the location relative to the
			# HTML output directory using the MATHJAX_RELPATH option. The destination
			# directory should contain the MathJax.js script. For instance, if the mathjax
			# directory is located at the same level as the HTML output directory, then
			# MATHJAX_RELPATH should be ../mathjax. The default value points to the
			# mathjax.org site, so you can quickly see the result without installing
			# MathJax, but it is strongly recommended to install a local copy of MathJax
			# before deployment.

			MATHJAX_RELPATH = http://www.mathjax.org/mathjax

			# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
			# names that should be enabled during MathJax rendering.

			MATHJAX_EXTENSIONS =

			# When the SEARCHENGINE tag is enabled doxygen will generate a search box
			# for the HTML output. The underlying search engine uses javascript
			# and DHTML and should work on any modern browser. Note that when using
			# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
			# (GENERATE_DOCSET) there is already a search function so this one should
			# typically be disabled. For large projects the javascript based search engine
			# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.

			SEARCHENGINE = YES

			# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
			# implemented using a PHP enabled web server instead of at the web client
			# using Javascript. Doxygen will generate the search PHP script and index
			# file to put on the web server. The advantage of the server
			# based approach is that it scales better to large projects and allows
			# full text search. The disadvantages are that it is more difficult to setup
			# and does not have live searching capabilities.

			SERVER_BASED_SEARCH = NO

			#---------------------------------------------------------------------------
			# configuration options related to the LaTeX output
			#---------------------------------------------------------------------------

			# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
			# generate Latex output.

			GENERATE_LATEX = NO

			# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
			# If a relative path is entered the value of OUTPUT_DIRECTORY will be
			# put in front of it. If left blank `latex' will be used as the default path.

			LATEX_OUTPUT = latex

			# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
			# invoked. If left blank `latex' will be used as the default command name.
			# Note that when enabling USE_PDFLATEX this option is only used for
			# generating bitmaps for formulas in the HTML output, but not in the
			# Makefile that is written to the output directory.

			LATEX_CMD_NAME = latex

			# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
			# generate index for LaTeX. If left blank `makeindex' will be used as the
			# default command name.

			MAKEINDEX_CMD_NAME = makeindex

			# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
			# LaTeX documents. This may be useful for small projects and may help to
			# save some trees in general.

			COMPACT_LATEX = NO

			# The PAPER_TYPE tag can be used to set the paper type that is used
			# by the printer. Possible values are: a4, letter, legal and
			# executive. If left blank a4wide will be used.

			PAPER_TYPE = a4

			# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
			# packages that should be included in the LaTeX output.

			EXTRA_PACKAGES = amsmath

			# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
			# the generated latex document. The header should contain everything until
			# the first chapter. If it is left blank doxygen will generate a
			# standard header. Notice: only use this tag if you know what you are doing!

			LATEX_HEADER =

			# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
			# the generated latex document. The footer should contain everything after
			# the last chapter. If it is left blank doxygen will generate a
			# standard footer. Notice: only use this tag if you know what you are doing!

			LATEX_FOOTER =

			# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
			# is prepared for conversion to pdf (using ps2pdf). The pdf file will
			# contain links (just like the HTML output) instead of page references
			# This makes the output suitable for online browsing using a pdf viewer.

			PDF_HYPERLINKS = YES

			# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
			# plain latex in the generated Makefile. Set this option to YES to get a
			# higher quality PDF documentation.

			USE_PDFLATEX = YES

			# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
			# command to the generated LaTeX files. This will instruct LaTeX to keep
			# running if errors occur, instead of asking the user for help.
			# This option is also used when generating formulas in HTML.

			LATEX_BATCHMODE = YES

			# If LATEX_HIDE_INDICES is set to YES then doxygen will not
			# include the index chapters (such as File Index, Compound Index, etc.)
			# in the output.

			LATEX_HIDE_INDICES = NO

			# If LATEX_SOURCE_CODE is set to YES then doxygen will include
			# source code with syntax highlighting in the LaTeX output.
			# Note that which sources are shown also depends on other settings
			# such as SOURCE_BROWSER.

			LATEX_SOURCE_CODE = YES

			# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
			# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
			# http://en.wikipedia.org/wiki/BibTeX for more info.

			LATEX_BIB_STYLE = plain

			#---------------------------------------------------------------------------
			# configuration options related to the RTF output
			#---------------------------------------------------------------------------

			# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
			# The RTF output is optimized for Word 97 and may not look very pretty with
			# other RTF readers or editors.

			GENERATE_RTF = NO

			# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
			# If a relative path is entered the value of OUTPUT_DIRECTORY will be
			# put in front of it. If left blank `rtf' will be used as the default path.

			RTF_OUTPUT = rtf

			# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
			# RTF documents. This may be useful for small projects and may help to
			# save some trees in general.

			COMPACT_RTF = NO

			# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
			# will contain hyperlink fields. The RTF file will
			# contain links (just like the HTML output) instead of page references.
			# This makes the output suitable for online browsing using WORD or other
			# programs which support those fields.
			# Note: wordpad (write) and others do not support links.

			RTF_HYPERLINKS = NO

			# Load style sheet definitions from file. Syntax is similar to doxygen's
			# config file, i.e. a series of assignments. You only have to provide
			# replacements, missing definitions are set to their default value.

			RTF_STYLESHEET_FILE =

			# Set optional variables used in the generation of an rtf document.
			# Syntax is similar to doxygen's config file.

			RTF_EXTENSIONS_FILE =

			#---------------------------------------------------------------------------
			# configuration options related to the man page output
			#---------------------------------------------------------------------------

			# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
			# generate man pages

			GENERATE_MAN = YES

			# The MAN_OUTPUT tag is used to specify where the man pages will be put.
			# If a relative path is entered the value of OUTPUT_DIRECTORY will be
			# put in front of it. If left blank `man' will be used as the default path.

			MAN_OUTPUT = man

			# The MAN_EXTENSION tag determines the extension that is added to
			# the generated man pages (default is the subroutine's section .3)

			MAN_EXTENSION = .3

			# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
			# then it will generate one additional man file for each entity
			# documented in the real man page(s). These additional files
			# only source the real man page, but without them the man command
			# would be unable to find the correct page. The default is NO.

			MAN_LINKS = NO

			#---------------------------------------------------------------------------
			# configuration options related to the XML output
			#---------------------------------------------------------------------------

			# If the GENERATE_XML tag is set to YES Doxygen will
			# generate an XML file that captures the structure of
			# the code including all documentation.

			GENERATE_XML = NO

			# The XML_OUTPUT tag is used to specify where the XML pages will be put.
			# If a relative path is entered the value of OUTPUT_DIRECTORY will be
			# put in front of it. If left blank `xml' will be used as the default path.

			XML_OUTPUT = xml

			# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
			# dump the program listings (including syntax highlighting
			# and cross-referencing information) to the XML output. Note that
			# enabling this will significantly increase the size of the XML output.

			XML_PROGRAMLISTING = YES

			#---------------------------------------------------------------------------
			# configuration options for the AutoGen Definitions output
			#---------------------------------------------------------------------------

			# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
			# generate an AutoGen Definitions (see autogen.sf.net) file
			# that captures the structure of the code including all
			# documentation. Note that this feature is still experimental
			# and incomplete at the moment.

			GENERATE_AUTOGEN_DEF = NO

			#---------------------------------------------------------------------------
			# configuration options related to the Perl module output
			#---------------------------------------------------------------------------

			# If the GENERATE_PERLMOD tag is set to YES Doxygen will
			# generate a Perl module file that captures the structure of
			# the code including all documentation. Note that this
			# feature is still experimental and incomplete at the
			# moment.

			GENERATE_PERLMOD = NO

			# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
			# the necessary Makefile rules, Perl scripts and LaTeX code to be able
			# to generate PDF and DVI output from the Perl module output.

			PERLMOD_LATEX = NO

			# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
			# nicely formatted so it can be parsed by a human reader. This is useful
			# if you want to understand what is going on. On the other hand, if this
			# tag is set to NO the size of the Perl module output will be much smaller
			# and Perl will parse it just the same.

			PERLMOD_PRETTY = YES

			# The names of the make variables in the generated doxyrules.make file
			# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
			# This is useful so different doxyrules.make files included by the same
			# Makefile don't overwrite each other's variables.

			PERLMOD_MAKEVAR_PREFIX =

			#---------------------------------------------------------------------------
			# Configuration options related to the preprocessor
			#---------------------------------------------------------------------------

			# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
			# evaluate all C-preprocessor directives found in the sources and include
			# files.

			ENABLE_PREPROCESSING = YES

			# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
			# names in the source code. If set to NO (the default) only conditional
			# compilation will be performed. Macro expansion can be done in a controlled
			# way by setting EXPAND_ONLY_PREDEF to YES.

			MACRO_EXPANSION = YES

			# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
			# then the macro expansion is limited to the macros specified with the
			# PREDEFINED and EXPAND_AS_DEFINED tags.

			EXPAND_ONLY_PREDEF = NO

			# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
			# pointed to by INCLUDE_PATH will be searched when a #include is found.

			SEARCH_INCLUDES = YES

			# The INCLUDE_PATH tag can be used to specify one or more directories that
			# contain include files that are not input files but should be processed by
			# the preprocessor.

			INCLUDE_PATH = @AKANTU_DOXYGEN_INCLUDE_DIRS@

			# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
			# patterns (like .h and .hpp) to filter out the header-files in the
			# directories. If left blank, the patterns specified with FILE_PATTERNS will
			# be used.

			INCLUDE_FILE_PATTERNS = *.hh

			# The PREDEFINED tag can be used to specify one or more macro names that
			# are defined before the preprocessor is started (similar to the -D option of
			# gcc). The argument of the tag is a list of macros of the form: name
			# or name=definition (no spaces). If the definition and the = are
			# omitted =1 is assumed. To prevent a macro definition from being
			# undefined via #undef or recursively expanded use the := operator
			# instead of the = operator.

			PREDEFINED = @AKANTU_DOXYGEN_DEFINTIONS@

			# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
			# this tag can be used to specify a list of macro names that should be expanded.
			# The macro definition that is found in the sources will be used.
			# Use the PREDEFINED tag if you want to use a different macro definition that
			# overrules the definition found in the source code.

			EXPAND_AS_DEFINED = __BEGIN_AKANTU__ \
			__END_AKANTU__ \
			AKANTU_GET_MACRO \
			AKANTU_SET_MACRO \
			AKANTU_GET_MACRO_NOT_CONST \
			AKANTU_GET_MACRO_BY_ELEMENT_TYPE

			# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
			# doxygen's preprocessor will remove all references to function-like macros
			# that are alone on a line, have an all uppercase name, and do not end with a
			# semicolon, because these will confuse the parser if not removed.

			SKIP_FUNCTION_MACROS = YES

			#---------------------------------------------------------------------------
			# Configuration::additions related to external references
			#---------------------------------------------------------------------------

			# The TAGFILES option can be used to specify one or more tagfiles.
			# Optionally an initial location of the external documentation
			# can be added for each tagfile. The format of a tag file without
			# this location is as follows:
			# TAGFILES = file1 file2 ...
			# Adding location for the tag files is done as follows:
			# TAGFILES = file1=loc1 "file2 = loc2" ...
			# where "loc1" and "loc2" can be relative or absolute paths or
			# URLs. If a location is present for each tag, the installdox tool
			# does not have to be run to correct the links.
			# Note that each tag file must have a unique name
			# (where the name does NOT include the path)
			# If a tag file is not located in the directory in which doxygen
			# is run, you must also specify the path to the tagfile here.

			TAGFILES =

			# When a file name is specified after GENERATE_TAGFILE, doxygen will create
			# a tag file that is based on the input files it reads.

			GENERATE_TAGFILE =

			# If the ALLEXTERNALS tag is set to YES all external classes will be listed
			# in the class index. If set to NO only the inherited external classes
			# will be listed.

			ALLEXTERNALS = NO

			# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
			# in the modules index. If set to NO, only the current project's groups will
			# be listed.

			EXTERNAL_GROUPS = YES

			# The PERL_PATH should be the absolute path and name of the perl script
			# interpreter (i.e. the result of `which perl').

			PERL_PATH = /usr/bin/perl

			#---------------------------------------------------------------------------
			# Configuration options related to the dot tool
			#---------------------------------------------------------------------------

			# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
			# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
			# or super classes. Setting the tag to NO turns the diagrams off. Note that
			# this option also works with HAVE_DOT disabled, but it is recommended to
			# install and use dot, since it yields more powerful graphs.

			CLASS_DIAGRAMS = YES

			# You can define message sequence charts within doxygen comments using the \msc
			# command. Doxygen will then run the mscgen tool (see
			# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
			# documentation. The MSCGEN_PATH tag allows you to specify the directory where
			# the mscgen tool resides. If left empty the tool is assumed to be found in the
			# default search path.

			MSCGEN_PATH =

			# If set to YES, the inheritance and collaboration graphs will hide
			# inheritance and usage relations if the target is undocumented
			# or is not a class.

			HIDE_UNDOC_RELATIONS = YES

			# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
			# available from the path. This tool is part of Graphviz, a graph visualization
			# toolkit from AT&T and Lucent Bell Labs. The other options in this section
			# have no effect if this option is set to NO (the default)

			HAVE_DOT = YES

			# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
			# allowed to run in parallel. When set to 0 (the default) doxygen will
			# base this on the number of processors available in the system. You can set it
			# explicitly to a value larger than 0 to get control over the balance
			# between CPU load and processing speed.

			DOT_NUM_THREADS = 0

			# By default doxygen will use the Helvetica font for all dot files that
			# doxygen generates. When you want a differently looking font you can specify
			# the font name using DOT_FONTNAME. You need to make sure dot is able to find
			# the font, which can be done by putting it in a standard location or by setting
			# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
			# directory containing the font.

			DOT_FONTNAME = Helvetica

			# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
			# The default size is 10pt.

			DOT_FONTSIZE = 10

			# By default doxygen will tell dot to use the Helvetica font.
			# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to
			# set the path where dot can find it.

			DOT_FONTPATH =

			# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
			# will generate a graph for each documented class showing the direct and
			# indirect inheritance relations. Setting this tag to YES will force the
			# CLASS_DIAGRAMS tag to NO.

			CLASS_GRAPH = YES

			# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
			# will generate a graph for each documented class showing the direct and
			# indirect implementation dependencies (inheritance, containment, and
			# class references variables) of the class with other documented classes.

			COLLABORATION_GRAPH = NO

			# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
			# will generate a graph for groups, showing the direct groups dependencies

			GROUP_GRAPHS = YES

			# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
			# collaboration diagrams in a style similar to the OMG's Unified Modeling
			# Language.

			UML_LOOK = YES

			# If set to YES, the inheritance and collaboration graphs will show the
			# relations between templates and their instances.

			TEMPLATE_RELATIONS = NO

			# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
			# tags are set to YES then doxygen will generate a graph for each documented
			# file showing the direct and indirect include dependencies of the file with
			# other documented files.

			INCLUDE_GRAPH = YES

			# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
			# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
			# documented header file showing the documented files that directly or
			# indirectly include this file.

			INCLUDED_BY_GRAPH = YES

			# If the CALL_GRAPH and HAVE_DOT options are set to YES then
			# doxygen will generate a call dependency graph for every global function
			# or class method. Note that enabling this option will significantly increase
			# the time of a run. So in most cases it will be better to enable call graphs
			# for selected functions only using the \callgraph command.

			CALL_GRAPH = YES

			# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
			# doxygen will generate a caller dependency graph for every global function
			# or class method. Note that enabling this option will significantly increase
			# the time of a run. So in most cases it will be better to enable caller
			# graphs for selected functions only using the \callergraph command.

			CALLER_GRAPH = YES

			# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
			# will generate a graphical hierarchy of all classes instead of a textual one.

			GRAPHICAL_HIERARCHY = YES

			# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
			# then doxygen will show the dependencies a directory has on other directories
			# in a graphical way. The dependency relations are determined by the #include
			# relations between the files in the directories.

			DIRECTORY_GRAPH = YES

			# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
			# generated by dot. Possible values are svg, png, jpg, or gif.
			# If left blank png will be used. If you choose svg you need to set
			# HTML_FILE_EXTENSION to xhtml in order to make the SVG files
			# visible in IE 9+ (other browsers do not have this requirement).

			DOT_IMAGE_FORMAT = png

			# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
			# enable generation of interactive SVG images that allow zooming and panning.
			# Note that this requires a modern browser other than Internet Explorer.
			# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you
			# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
			# visible. Older versions of IE do not have SVG support.

			INTERACTIVE_SVG = NO

			# The tag DOT_PATH can be used to specify the path where the dot tool can be
			# found. If left blank, it is assumed the dot tool can be found in the path.

			DOT_PATH = @DOXYGEN_DOT_PATH@

			# The DOTFILE_DIRS tag can be used to specify one or more directories that
			# contain dot files that are included in the documentation (see the
			# \dotfile command).

			DOTFILE_DIRS =

			# The MSCFILE_DIRS tag can be used to specify one or more directories that
			# contain msc files that are included in the documentation (see the
			# \mscfile command).

			MSCFILE_DIRS =

			# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
			# nodes that will be shown in the graph. If the number of nodes in a graph
			# becomes larger than this value, doxygen will truncate the graph, which is
			# visualized by representing a node as a red box. Note that doxygen if the
			# number of direct children of the root node in a graph is already larger than
			# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
			# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.

			DOT_GRAPH_MAX_NODES = 600

			# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
			# graphs generated by dot. A depth value of 3 means that only nodes reachable
			# from the root by following a path via at most 3 edges will be shown. Nodes
			# that lay further from the root node will be omitted. Note that setting this
			# option to 1 or 2 may greatly reduce the computation time needed for large
			# code bases. Also note that the size of a graph can be further restricted by
			# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.

			MAX_DOT_GRAPH_DEPTH = 2

			# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
			# background. This is disabled by default, because dot on Windows does not
			# seem to support this out of the box. Warning: Depending on the platform used,
			# enabling this option may lead to badly anti-aliased labels on the edges of
			# a graph (i.e. they become hard to read).

			DOT_TRANSPARENT = NO

			# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
			# files in one run (i.e. multiple -o and -T options on the command line). This
			# makes dot run faster, but since only newer versions of dot (>1.8.10)
			# support this, this feature is disabled by default.

			DOT_MULTI_TARGETS = NO

			# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
			# generate a legend page explaining the meaning of the various boxes and
			# arrows in the dot generated graphs.

			GENERATE_LEGEND = YES

			# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
			# remove the intermediate dot files that are used to generate
			# the various graphs.

			DOT_CLEANUP = YES

rAKA/doc/doxygen/akantu.dox.in8ec69c092a39bugfixes/39-the-python…

akantu.dox.inView Options

rAKA/doc/doxygen/akantu.dox.in
8ec69c092a39bugfixes/39-the-python…

akantu.dox.in
View Options