Homec4science
Diffusion akantu (bugfixes/empty_filter_does_not_work_in_python) Browse

rAKA/doc/manual/manual-io.tex
86a8f46cc420bugfixes/empty_filter_d…

Last Change
Raw File

manual-io.tex
View Options

\chapter{Input/Output}\index{I\/O}
\section{Generic data}
In this chapter, we address ways to get the internal data in human-readable formats.
The models in \akantu handle data associated to the
mesh, but this data can be split into several \code{Arrays}. For example, the
data stored per element type in a \code{ElementTypeMapArray} is composed of as
many \code{Array}s as types in the mesh.
In order to get this data in a visualization software, the models contain a
object to dump \code{VTK} files. These files can be visualized in software such
as \code{ParaView}\cite{paraview}, \code{ViSit}\cite{visit} or \code{Mayavi}\cite{mayavi}.
The internal dumper of the model can be configured to specify which data fields
are to be written. This is done with the
\code{addDumpField}\index{I\/O!addDumpField} method. By default all the files
are generated in a folder called \code{paraview/}
\begin{cpp}
model.setBaseName("output"); // prefix for all generated files
model.addDumpField("displacement");
model.addDumpField("stress");
...
model.dump()
\end{cpp}
The fields are dumped with the number of components of the memory. For example, in 2D, the memory has
\code{Vector}s of 2 components, or the $2^{nd}$ order tensors with $2\times2$ components.
This memory can be dealt with \code{addDumpFieldVector}\index{I\/O!addDumpFieldVector} which always dumps
\code{Vector}s with 3 components or \code{addDumpFieldTensor}\index{I\/O!addDumpFieldTensor} which dumps $2^{nd}$
order tensors with $3\times3$ components respectively. The routines \code{addDumpFieldVector}\index{I\/O!addDumpFieldVector} and
\code{addDumpFieldTensor}\index{I\/O!addDumpFieldTensor} were introduced because of Paraview which mostly manipulate 3D
data.
Those fields which are stored by quadrature point are modified to be seen in the
\code{VTK} file as elemental data. To do this, the default is to average the
values of all the quadrature points.
The list of fields depends on the models (for
\code{SolidMechanicsModel} see table~\ref{tab:io:smm_field_list}).
\begin{table}
\centering
\begin{tabular}{llll}
\toprule
key & type & support \\
\midrule
displacement & Vector<Real> & nodes \\
velocity & Vector<Real> & nodes \\
acceleration & Vector<Real> & nodes \\
force & Vector<Real> & nodes \\
residual & Vector<Real> & nodes \\
boundary & Vector<bool> & nodes \\
mass & Vector<Real> & nodes \\
partitions & Real & elements \\
stress & Matrix<Real> & quadrature points \\
Von Mises stress & Real & quadrature points \\
grad\_u & Matrix<Real> & quadrature points \\
strain & Matrix<Real> & quadrature points \\
principal strain & Vector<Real> & quadrature points \\
Green strain & Matrix<Real> & quadrature points \\
principal Green strain & Vector<Real> & quadrature points \\
\textit{material internals} & variable & quadrature points \\
\bottomrule
\end{tabular}
\caption{List of dumpable fields for \code{SolidMechanicsModel}.}
\label{tab:io:smm_field_list}
\end{table}
The user can also register external fields which have the same mesh as the mesh from the model as support. To do this, an object of type \code{Field} has to be created.\index{I\/O!addDumpFieldExternal}
\begin{itemize}
\item For nodal fields :
\begin{cpp}
Vector<T> vect(nb_nodes, nb_component);
Field field = new DumperIOHelper::NodalField<T>(vect));
model.addDumpFieldExternal("my_field", field);
\end{cpp}
\item For elemental fields :
\begin{cpp}
ElementTypeMapArray<T> arr;
Field field = new DumperIOHelper::ElementalField<T>(arr, spatial_displacement));
model.addDumpFieldExternal("my_field", field);
\end{cpp}
\end{itemize}
\section{Cohesive elements' data}
Cohesive elements and their relative data can be easily dumped thanks
to a specific dumper contained in
\code{SolidMechanicsModelCohesive}. In order to use it, one has just
to add the string \code{"cohesive elements"} when calling each method
already illustrated. Here is an example on how to dump displacement
and damage:
\begin{cpp}
model.setBaseNameToDumper("cohesive elements", "cohesive_elements_output");
model.addDumpFieldVectorToDumper("cohesive elements", "displacement");
model.addDumpFieldToDumper("cohesive elements", "damage");
...
model.dump("cohesive elements");
\end{cpp}
%%% Local Variables:
%%% mode: latex
%%% TeX-master: "manual"
%%% End:
c4science · Help