Diffusion akantu (bugfixes/macos-compilation) Browse

macos…

manual.sty
View Options

			%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
			%% %%
			%% LaTeX STYLE SHEET for AKANTU DOCUMENTATION %%
			%% %%
			%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
			% Geometry
			\usepackage{a4wide}
			\usepackage{geometry}
			\geometry{
			pdftex=true,
			twoside=true,
			margin=20mm,
			bottom=20mm,
			top=20mm,
			bindingoffset=5.5mm
			}

			% Font encoding
			\usepackage[T1]{fontenc}
			\usepackage{palatino}

			% Line spacing
			\linespread{1.05}\selectfont

			\usepackage{multicol}

			% Allow spaces to be added at the end of macro
			\usepackage{xspace}

			% Mathematics (including correct font encoding, after amsmath)
			\usepackage{amsmath}
			\usepackage{amssymb}
			\usepackage{pxfonts}
			\setlength\mathindent{2em}

			% Some unit stuff
			\usepackage{siunitx}

			% Easy tables
			\usepackage{booktabs}
			\usepackage{longtable}
			\usepackage{rotating} % For sideways tables
			\usepackage{multirow} % For larger cells

			% A special environment for element tables
			\newcommand\elemline{}%{\noalign{\smallskip}\hline\noalign{\smallskip}}
			\newcommand\elemcooroned{\ensuremath{\left(\xi\right)}}
			\newcommand\elemcoortwod{\ensuremath{\left(\xi\;,\;\eta\right)}}
			\newcommand\elemcoorthreed{\ensuremath{\left(\xi\;,\;\eta\;,\;\zeta\right)}}
			\newcommand\elemdshapeoned{\ensuremath{\left(\partial N_i/\partial\xi\right)}}
			\newcommand\elemdshapetwod{\ensuremath{\left(\partial N_i/\partial\xi\;,\;\partial N_i/\partial\eta\right)}}
			\newcommand\elemdshapethreed{\ensuremath{\left(\partial N_i/\partial\xi\;,\;\partial N_i/\partial\eta\;,\;\partial N_i/\partial\zeta\right)}}
			\newcommand\inelemone[1]{\ensuremath{#1}}
			%\newcommand\inelemtwo[2]{\ensuremath{\begin{pmatrix} {\; #1} & \!,\! & {#2 \;} \end{pmatrix}}}
			%\newcommand\inelemthree[3]{\ensuremath{\begin{pmatrix} {\; #1} & \!,\! & {#2} & \!,\! & {#3 \;} \end{pmatrix}}}
			\newcommand\inelemtwo[2]{\ensuremath{\left( {\; #1} \; , \; {#2 \;} \right)}}
			\newcommand\inelemthree[3]{\ensuremath{\left( {\; #1} \; , \; {#2} \; , \; {#3 \;} \right)}}
			\newcommand\inelemthreecolumn[3]{\ensuremath{\begin{array}{c}( {\; #1} \; ,\\{#2} \; ,\\{#3 \;} )\end{array}}}
			\newcommand\inquadone[1]{\ensuremath{#1}}
			\newcommand\inquadtwo[2]{\ensuremath{\left(\, #1 \, , \, #2 \,\right)}}
			\newcommand\inquadthree[3]{\ensuremath{\left(\, #1 \, , \, #2 \, , \, #3 \,\right)}}
			%\newcommand\quada{\tfrac{1}{20}\left(5-\sqrt{5}\right)}
			%\newcommand\quadb{\tfrac{1}{20}\left(5+3\sqrt{5}\right)}
			\newcommand\quada{\tfrac{\left(5-\sqrt{5}\right)}{20}}
			\newcommand\quadb{\tfrac{\left(5+3\sqrt{5}\right)}{20}}
			\newenvironment{Element}[1]
			{%\begin{table*}[!htbp]
			\footnotesize
			\ifthenelse{\equal{#1}{1D}}{\renewcommand{\arraystretch}{1.50}}{}
			\ifthenelse{\equal{#1}{2D}}{\renewcommand{\arraystretch}{1.60}}{}
			\ifthenelse{\equal{#1}{3D}}{\renewcommand{\arraystretch}{1.70}}{}
			\textbf{{\normalsize Element properties}}\\%\vspace*{0.5\baselineskip}
			\begin{tabular}{cccc}\\[-2ex]
			\toprule
			% \multicolumn{4}{l}{\textbf{{\normalsize Element properties}}} \\
			Node ($i$) & Coord.
			\ifthenelse{\equal{#1}{1D}}{\elemcooroned}{}
			\ifthenelse{\equal{#1}{2D}}{\elemcoortwod}{}
			\ifthenelse{\equal{#1}{3D}}{\elemcoorthreed}{}
			& Shape function ($N_{i}$)
			& {Derivative
			\ifthenelse{\equal{#1}{1D}}{\elemdshapeoned}{}
			\ifthenelse{\equal{#1}{2D}}{\elemdshapetwod}{}
			\ifthenelse{\equal{#1}{3D}}{\elemdshapethreed}{}
			}\\
			\midrule
			\elemline
			}
			{\bottomrule
			\end{tabular}%\end{table*}
			}

			\newenvironment{Element_part1}[1]
			{%\begin{table*}[!htbp]
			\footnotesize
			\ifthenelse{\equal{#1}{1D}}{\renewcommand{\arraystretch}{1.50}}{}
			\ifthenelse{\equal{#1}{2D}}{\renewcommand{\arraystretch}{1.60}}{}
			\ifthenelse{\equal{#1}{3D}}{\renewcommand{\arraystretch}{1.70}}{}
			\textbf{{\normalsize Element properties}}\\%\vspace*{0.5\baselineskip}
			\begin{tabular}{ccc}\\[-2ex]
			\toprule
			% \multicolumn{4}{l}{\textbf{{\normalsize Element properties}}} \\
			Node ($i$) & Coord.
			\ifthenelse{\equal{#1}{1D}}{\elemcooroned}{}
			\ifthenelse{\equal{#1}{2D}}{\elemcoortwod}{}
			\ifthenelse{\equal{#1}{3D}}{\elemcoorthreed}{}
			& Shape function ($N_{i}$)\\
			\midrule
			\elemline
			}
			{\bottomrule\end{tabular}}%\end{table*}}

			\newenvironment{Element_part2}[1]
			{%\begin{table*}[!htbp]
			\footnotesize
			\ifthenelse{\equal{#1}{1D}}{\renewcommand{\arraystretch}{1.50}}{}
			\ifthenelse{\equal{#1}{2D}}{\renewcommand{\arraystretch}{1.60}}{}
			\ifthenelse{\equal{#1}{3D}}{\renewcommand{\arraystretch}{1.70}}{}
			\textbf{{\normalsize Element properties}}\\%\vspace*{0.5\baselineskip}
			\begin{tabular}{cccc}\\[-2ex]
			\toprule
			% \multicolumn{4}{l}{\textbf{{\normalsize Element properties}}} \\
			Node ($i$)
			& {Derivative
			\ifthenelse{\equal{#1}{1D}}{\elemdshapeoned}{}
			\ifthenelse{\equal{#1}{2D}}{\elemdshapetwod}{}
			\ifthenelse{\equal{#1}{3D}}{\elemdshapethreed}{}
			}\\
			\midrule
			\elemline
			}
			{\bottomrule
			\end{tabular}%\end{table*}
			}

			\newenvironment{QuadPoints}[1]
			{\vspace*{\baselineskip}
			%\begin{table*}[!htbp]
			\footnotesize
			\renewcommand{\arraystretch}{1.50}
			\noindent\textbf{{\normalsize Gaussian quadrature points}}\newline%\vspace*{0.5\baselineskip}
			\begin{tabular}{#1}\\[-2ex]
			\toprule
			}
			{\bottomrule\end{tabular}}%\end{table*}}

			%\usepackage{xparse}

			\newenvironment{MaterialDesc}[2]{
			\label{#2-app}
			Keyword: \code{#1}\par
			\noindent Description here: \ref{#2}\par
			\noindent Parameters:\par
			\vspace*{-.4cm}
			\begin{itemize}
			\setlength{\topsep}{0ex}%
			\setlength{\parsep}{0cm}%
			\setlength{\itemsep}{0cm}%
			\setlength{\parskip}{0cm}%
			}{\end{itemize}}

			\newcommand{\matparam}[3]{\item \code{#1}: (\emph{#2}) #3}
			\newcommand{\matinherit}[1]{\usebox{#1}}
			\newcommand{\matlabel}[1]{\label{#1}\xspace(\ref{#1-app})}
			% Nice coloring
			\usepackage[dvipsnames,usenames,table]{xcolor}
			\definecolor{RED}{rgb}{1,0,0}
			\definecolor{cppbg}{HTML}{EBF2F2}
			\definecolor{shellbg}{HTML}{F5EDE4}
			\definecolor{cmakebg}{HTML}{F5EDE4}
			\definecolor{commentcolor}{HTML}{101280}

			% Allow for the use of listings
			\usepackage{listings}

			% Create an index
			\usepackage{makeidx}

			% Figure handling
			\usepackage{graphics}
			\usepackage{epsfig}
			\usepackage[lofdepth,lotdepth]{subfig}
			\usepackage{tikz}
			\usetikzlibrary{decorations}
			\usepackage{wrapfig}

			\renewcommand{\floatpagefraction}{.6} % default: .5
			\renewcommand\topfraction{0.9} % 90% of page top can be a float (Standard 0.7)
			\renewcommand\bottomfraction{0.1} % 10% of page bottom can be a float (Standard 0.3)
			\renewcommand\textfraction{0.1} % only 10% of page must to be text (Standard 0.2)

			% Removes parenthese around subfig number
			\renewcommand*{\thesubfigure}{\alph{subfigure}}

			% Create new list style for cmake files
			\lstdefinelanguage{cmake}{
			morekeywords={project, cmake\_minimum\_required, enable\_language, message,
			add\_executable, add\_library, target\_link\_libraries, include\_directories,
			find\_package, find\_path, find\_library, include, mark\_as\_advanced,
			find\_package\_handle\_standard\_args,
			package\_declare, package\_declare\_documentation},
			morecomment=[l]{\#},
			sensitive=false,
			morestring=[b]",
			}

			\lstdefinestyle{lstDefaultStyle} {
			basicstyle=\small\ttfamily, % Without beramono, we'd get cmtt, the teletype font.
			commentstyle=\color{commentcolor}\itshape,
			% fontadjust,
			% numbers=left, % where to put the line-numbers
			% numberstyle=\tiny, % the size of the fonts that are used for the line-numbers
			% stepnumber=2, % the step between two line-numbers. If it's 1, each line will
			% be numbered
			% numbersep=5pt, % how far the line-numbers are from the code
			% showspaces=false, % show spaces adding particular underscores
			showstringspaces=false, % underline spaces within strings
			% showtabs=false, % show tabs within strings adding particular underscores
			% frame=llines, % adds a frame around the code
			% frame=tb,
			tabsize=2, % sets default tabsize to 2 spaces
			captionpos=b, % sets the caption-position to bottom
			breaklines=true, % sets automatic line breaking
			breakatwhitespace=false, % sets if automatic breaks should only happen at
			% whitespace
			% title=\lstname, % show the filename of files included with \lstinputlisting;
			% also try caption instead of title
			% escapeinside={\%}{)}, % if you want to add a comment within your code
			xleftmargin=1cm,
			xrightmargin=1cm,
			escapechar=\%,
			columns=flexible,
			keepspaces=true,
			mathescape=false
			}

			% Create a new list style for C++
			\lstdefinestyle{C++}{
			language=C++, % the language of the code
			style=lstDefaultStyle,
			keywordstyle=\color{DarkOrchid}\bfseries,
			mathescape=true,
			morekeywords={Real, UInt, Int},
			backgroundcolor=\color{cppbg}
			}

			% Create a new list style for python
			\lstdefinestyle{python}{
			language=python, % the language of the code
			basicstyle=\small\ttfamily, % Without beramono, we'd get cmtt, the teletype font.
			commentstyle=\color{commentcolor}\itshape,
			keywordstyle=\color{DarkOrchid}\bfseries,
			showstringspaces=false, % underline spaces within strings
			tabsize=2, % sets default tabsize to 2 spaces
			captionpos=b, % sets the caption-position to bottom
			breaklines=true, % sets automatic line breaking
			breakatwhitespace=false, % sets if automatic breaks should only happen at
			xleftmargin=1cm,
			xrightmargin=1cm,
			mathescape=true,
			escapechar=\%,
			morekeywords={Real, UInt, Int},
			columns=flexible,
			keepspaces=true,
			backgroundcolor=\color{cppbg}
			}

			% Create new list style for the shell
			\lstdefinestyle{shell}{
			language=bash, % the language of the code
			style=lstDefaultStyle,
			morekeywords={mkdir, make, ccmake, cmake},
			backgroundcolor=\color{shellbg}
			}

			\lstdefinestyle{mycmake}{
			language=cmake, % the language of the code
			style=lstDefaultStyle,
			keywordstyle=\color{RoyalBlue}\bfseries,
			stringstyle=\color{Bittersweet}, %
			backgroundcolor=\color{cmakebg}
			}

			% Set some derived listing environments
			\lstnewenvironment{cpp}{\lstset{style=C++}}{}
			\lstnewenvironment{python}{\lstset{style=python}}{}
			\lstnewenvironment{command}{\lstset{style=shell}}{}
			\lstnewenvironment{cmake}{\lstset{style=mycmake}}{}

			% Make sure outputspace is white
			\makeatletter
			\def\lst@outputspace{{\ifx\lst@bkgcolor\empty\color{white}\else\lst@bkgcolor\fi\lst@visiblespace}}
			\makeatother

			% Renow a label in the itemized lists
			\renewcommand{\labelitemi}{$\mathbf{\circ}$}

			% Don't care so much about overfull h-boxes
			\sloppy

			% Penalty adjusments
			%\widowpenalty=10000 % Single lines/word on beginning of page
			%\clubpenalty=10000 % Single lines/word at end of page
			%\hyphenpenalty=2000 % Hyphenate words
			%\tolerance=250 % To adjust the hyphenation of words, increase the tolerance to discourage hyphenation
			% the higher the value, the more ugly the gaps between words
			% default \tolerance=200
			%\hfuzz=10000pt % threshold when an overfull hbox is reported, default \hfuzz=0.1pt
			%\vfuzz=10000pt % threshold to report an overfull vbox, default \vfuzz=0.1pt
			%\hbadness=10000 % threshold to report an underfull \hbox
			%\vbadness=10000 % threshold to report an underfull \vbox protokolliert wird.
			\emergencystretch=0pt % causes a third attempt to fix bad paragraphs and defines a maximum limit to stretch them

			% Insert an empty or a blank page
			\newcommand{\insertemptypage}{\newpage\hbox{}\newpage}
			\newcommand{\insertblankpage}{\newpage\thispagestyle{empty}\hbox{}\newpage}

			% No page number on an empty page
			\let\origdoublepage\cleardoublepage
			\newcommand{\clearemptydoublepage}{%
			\clearpage
			{\thispagestyle{empty}\origdoublepage}%
			}
			\let\cleardoublepage\clearemptydoublepage

			% A new ruler for in chapters
			\newcommand\InChapterRule{\addvspace{\baselineskip}\rule{0.3\linewidth}{0.25pt}}

			% New footnote style
			%\def\@fnsymbol#1{\ifcase#1\or \or \dagger\or \ddagger\or \mathchar "278\or \mathchar "27B\or \\|\or *\or \dagger\dagger \or \ddagger\ddagger \else\@ctrerr\fi\relax}
			\def\@fnsymbol#1{*\xspace\relax}
			\renewcommand{\thefootnote}{\fnsymbol{footnote}} % Symbols rather than numbers
			\def\footnoterule{\vspace{0.5\baselineskip}\InChapterRule\vspace{0.25\baselineskip}}

			% Improved look of the Table of Contents
			\usepackage[nottoc,notbib]{tocbibind}
			\usepackage[dotinlabels]{titletoc}
			\titlecontents{chapter}[1.4pc]
			{\addvspace{0.6pc}\large\bfseries\filright}
			{\contentslabel[\thecontentslabel.]{1.4pc}}
			{\hspace{-1.4pc}}
			{\hfill\contentspage}
			[\addvspace{2pt}]
			\titlecontents{section}[3.4pc]
			{\filright}
			{\contentslabel[\thecontentslabel]{2pc}}
			{\hspace{-2pc}}
			{\titlerule*[6pt]{.}\contentspage}
			[]
			\titlecontents{subsection}[5.0pc]
			{\filright}
			{\contentslabel[\thecontentslabel]{2.4pc}}
			{}
			{\titlerule*[6pt]{.}\contentspage}
			[]
			\setcounter{tocdepth}{2}
			\newcommand\addspaceintoc{\addtocontents{toc}{\protect\addvspace{20pt}}}

			% Change the appearance of the bibliography
			\bibliographystyle{manual-bibliographystyle}
			\renewcommand\bibname{References}
			\usepackage{cite} % To sort citations: [2,10-14]
			\let\oldthebibliography=\thebibliography
			\let\endoldthebibliography=\endthebibliography
			\renewenvironment{thebibliography}[1]
			{ \begin{oldthebibliography}{#1}
			% \small
			\addcontentsline{toc}{chapter}{\bibname}
			\setlength{\labelsep}{2mm}
			\setlength{\parskip}{0\baselineskip}
			\setlength{\itemsep}{0.24\baselineskip}
			}
			{ \end{oldthebibliography} }

			% Hyperref
			\usepackage{url}
			\usepackage[pdftex,
			bookmarks=true,
			bookmarksnumbered=true,
			% linkbordercolor={1 1 1},
			% pdfborder={0 0 0},
			pdfpagemode=UseOutlines
			]{hyperref}
			\hypersetup{
			pdfauthor={Computational Solid Mechanics Laboratory - EPFL},
			pdftitle={Akantu User's Guide},
			pdfsubject={Open Source Finite Element Code - Akantu}
			}

			\newenvironment{AkantuPackage}[2]{%
			\paragraph*{#1}\label{#2}
			}{}
			\newenvironment{AkantuPackageDependencies}{\emph{Dependencies}: }{}

			\newcommand\AkantuPackageNameWithLabel[3]{\textit{\index{Packages!#1}\hyperref[#2]{#1}}\xspace}
			\newcommand\akantuManualAppendix[1]{}

rAKA/doc/manual/manual.sty4f86a0ad6046bugfixes/macos…

manual.styView Options

rAKA/doc/manual/manual.sty
4f86a0ad6046bugfixes/macos…

manual.sty
View Options