Homec4science
Diffusion akantu (bugfixes/missing_information_in_doc) Browse

rAKA/src/model/solid_mechanics/solid_mechanics_model_cohesive/materials/constitutive_laws/material_cohesive_linear_uncoupled.cc
32d6034b7279bugfixes/missing_inform…

Last Change
Raw File

material_cohesive_linear_uncoupled.cc
View Options

/**
* Copyright (©) 2016-2023 EPFL (Ecole Polytechnique Fédérale de Lausanne)
* Laboratory (LSMS - Laboratoire de Simulation en Mécanique des Solides)
*
* This file is part of Akantu
*
* Akantu is free software: you can redistribute it and/or modify it under the
* terms of the GNU Lesser General Public License as published by the Free
* Software Foundation, either version 3 of the License, or (at your option) any
* later version.
*
* Akantu is distributed in the hope that it will be useful, but WITHOUT ANY
* WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
* A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more
* details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with Akantu. If not, see <http://www.gnu.org/licenses/>.
*/
/* -------------------------------------------------------------------------- */
#include <algorithm>
#include <numeric>
/* -------------------------------------------------------------------------- */
#include "material_cohesive_linear_uncoupled.hh"
#include "solid_mechanics_model_cohesive.hh"
namespace akantu {
/* -------------------------------------------------------------------------- */
template <Int dim>
MaterialCohesiveLinearUncoupled<dim>::MaterialCohesiveLinearUncoupled(
SolidMechanicsModel & model, const ID & id)
: MaterialCohesiveLinear<dim>(model, id), delta_n_max("delta_n_max", *this),
delta_t_max("delta_t_max", *this), damage_n("damage_n", *this),
damage_t("damage_t", *this) {
AKANTU_DEBUG_IN();
this->registerParam(
"roughness", R, Real(1.), _pat_parsable | _pat_readable,
"Roughness to define coupling between mode II and mode I");
AKANTU_DEBUG_OUT();
}
/* -------------------------------------------------------------------------- */
template <Int dim> void MaterialCohesiveLinearUncoupled<dim>::initMaterial() {
AKANTU_DEBUG_IN();
MaterialCohesiveLinear<dim>::initMaterial();
delta_n_max.initialize(1);
delta_t_max.initialize(1);
damage_n.initialize(1);
damage_t.initialize(1);
delta_n_max.initializeHistory();
delta_t_max.initializeHistory();
AKANTU_DEBUG_OUT();
}
/* -------------------------------------------------------------------------- */
template <Int dim>
void MaterialCohesiveLinearUncoupled<dim>::computeTraction(
ElementType el_type, GhostType ghost_type) {
AKANTU_DEBUG_IN();
delta_n_max.resize();
delta_t_max.resize();
damage_n.resize();
damage_t.resize();
/// define iterators
auto traction_it = this->tractions(el_type, ghost_type).begin(dim);
auto traction_end = this->tractions(el_type, ghost_type).end(dim);
auto opening_it = this->opening(el_type, ghost_type).begin(dim);
auto contact_traction_it =
this->contact_tractions(el_type, ghost_type).begin(dim);
auto contact_opening_it =
this->contact_opening(el_type, ghost_type).begin(dim);
auto normal_it = this->normals(el_type, ghost_type).begin(dim);
auto sigma_c_it = this->sigma_c_eff(el_type, ghost_type).begin();
auto delta_n_max_it = delta_n_max(el_type, ghost_type).begin();
auto delta_t_max_it = delta_t_max(el_type, ghost_type).begin();
auto delta_c_it = this->delta_c_eff(el_type, ghost_type).begin();
auto damage_n_it = damage_n(el_type, ghost_type).begin();
auto damage_t_it = damage_t(el_type, ghost_type).begin();
auto insertion_stress_it =
this->insertion_stress(el_type, ghost_type).begin(dim);
Vector<Real, dim> normal_opening;
Vector<Real, dim> tangential_opening;
/// loop on each quadrature point
for (; traction_it != traction_end;
++traction_it, ++opening_it, ++contact_traction_it, ++contact_opening_it,
++normal_it, ++sigma_c_it, ++delta_n_max_it, ++delta_t_max_it,
++delta_c_it, ++damage_n_it, ++damage_t_it, ++insertion_stress_it) {
Real normal_opening_norm;
Real tangential_opening_norm;
bool penetration;
Real delta_c2_R2 = *delta_c_it * (*delta_c_it) / R / R;
/// compute normal and tangential opening vectors
normal_opening_norm = opening_it->dot(*normal_it);
normal_opening = *normal_it * normal_opening_norm;
tangential_opening = *opening_it - normal_opening;
tangential_opening_norm = tangential_opening.norm();
/// compute effective opening displacement
Real delta_n =
tangential_opening_norm * tangential_opening_norm * this->beta2_kappa2;
Real delta_t =
tangential_opening_norm * tangential_opening_norm * this->beta2_kappa2;
penetration = normal_opening_norm < 0.0;
if (not this->contact_after_breaking and
Math::are_float_equal(*damage_n_it, 1.)) {
penetration = false;
}
if (penetration) {
/// use penalty coefficient in case of penetration
*contact_traction_it = normal_opening * this->penalty;
*contact_opening_it = normal_opening;
/// don't consider penetration contribution for delta
//*opening_it = tangential_opening;
normal_opening.zero();
} else {
delta_n += normal_opening_norm * normal_opening_norm;
delta_t += normal_opening_norm * normal_opening_norm * delta_c2_R2;
contact_traction_it->zero();
contact_opening_it->zero();
}
delta_n = std::sqrt(delta_n);
delta_t = std::sqrt(delta_t);
/// update maximum displacement and damage
*delta_n_max_it = std::max(*delta_n_max_it, delta_n);
*damage_n_it = std::min(*delta_n_max_it / *delta_c_it, Real(1.));
*delta_t_max_it = std::max(*delta_t_max_it, delta_t);
*damage_t_it = std::min(*delta_t_max_it / *delta_c_it, Real(1.));
Vector<Real, dim> normal_traction;
Vector<Real, dim> shear_traction;
/// NORMAL TRACTIONS
if (Math::are_float_equal(*damage_n_it, 1.)) {
normal_traction.zero();
} else if (Math::are_float_equal(*damage_n_it, 0.)) {
if (penetration) {
normal_traction.zero();
} else {
normal_traction = *insertion_stress_it;
}
} else {
// the following formulation holds both in loading and in
// unloading-reloading
AKANTU_DEBUG_ASSERT(*delta_n_max_it != 0.,
"Division by zero, tolerance might be too low");
normal_traction = normal_opening * *sigma_c_it / (*delta_n_max_it) *
(1. - *damage_n_it);
}
/// SHEAR TRACTIONS
if (Math::are_float_equal(*damage_t_it, 1.) or
Math::are_float_equal(*damage_t_it, 0.)) {
shear_traction.zero();
} else {
AKANTU_DEBUG_ASSERT(*delta_t_max_it != 0.,
"Division by zero, tolerance might be too low");
shear_traction = tangential_opening * this->beta2_kappa * *sigma_c_it /
(*delta_t_max_it) * (1. - *damage_t_it);
}
*traction_it = normal_traction + shear_traction;
}
AKANTU_DEBUG_OUT();
}
/* -------------------------------------------------------------------------- */
template <Int dim>
void MaterialCohesiveLinearUncoupled<dim>::computeTangentTraction(
ElementType el_type, Array<Real> & tangent_matrix, GhostType ghost_type) {
AKANTU_DEBUG_IN();
/// define iterators
auto tangent_it = tangent_matrix.begin(dim, dim);
auto tangent_end = tangent_matrix.end(dim, dim);
auto normal_it = this->normals(el_type, ghost_type).begin(dim);
auto opening_it = this->opening(el_type, ghost_type).begin(dim);
/// NB: delta_max_it points on delta_max_previous, i.e. the
/// delta_max related to the solution of the previous incremental
/// step
auto delta_n_max_it = delta_n_max.previous(el_type, ghost_type).begin();
auto delta_t_max_it = delta_t_max.previous(el_type, ghost_type).begin();
auto sigma_c_it = this->sigma_c_eff(el_type, ghost_type).begin();
auto delta_c_it = this->delta_c_eff(el_type, ghost_type).begin();
auto damage_n_it = damage_n(el_type, ghost_type).begin();
auto contact_opening_it =
this->contact_opening(el_type, ghost_type).begin(dim);
Vector<Real, dim> normal_opening;
Vector<Real, dim> tangential_opening;
for (; tangent_it != tangent_end; ++tangent_it, ++normal_it, ++opening_it,
++sigma_c_it, ++delta_c_it,
++delta_n_max_it, ++delta_t_max_it,
++damage_n_it, ++contact_opening_it) {
Real normal_opening_norm;
Real tangential_opening_norm;
bool penetration;
Real delta_c2_R2 = *delta_c_it * (*delta_c_it) / R / R;
/**
* During the update of the residual the interpenetrations are
* stored in the array "contact_opening", therefore, in the case
* of penetration, in the array "opening" there are only the
* tangential components.
*/
*opening_it += *contact_opening_it;
/// compute normal and tangential opening vectors
normal_opening_norm = opening_it->dot(*normal_it);
normal_opening = *normal_it * normal_opening_norm;
tangential_opening = *opening_it - normal_opening;
tangential_opening_norm = tangential_opening.norm();
Real delta_n =
tangential_opening_norm * tangential_opening_norm * this->beta2_kappa2;
Real delta_t =
tangential_opening_norm * tangential_opening_norm * this->beta2_kappa2;
penetration = normal_opening_norm < 0.0;
if (not this->contact_after_breaking and
Math::are_float_equal(*damage_n_it, 1.)) {
penetration = false;
}
Real derivative = 0; // derivative = d(t/delta)/ddelta
Real T = 0;
/// TANGENT STIFFNESS FOR NORMAL TRACTIONS
Matrix<Real, dim, dim> n_outer_n = *normal_it * (*normal_it).transpose();
if (penetration) {
/// stiffness in compression given by the penalty parameter
*tangent_it = n_outer_n * this->penalty;
//*opening_it = tangential_opening;
normal_opening.zero();
} else {
delta_n += normal_opening_norm * normal_opening_norm;
delta_n = std::sqrt(delta_n);
delta_t += normal_opening_norm * normal_opening_norm * delta_c2_R2;
/**
* Delta has to be different from 0 to have finite values of
* tangential stiffness. At the element insertion, delta =
* 0. Therefore, a fictictious value is defined, for the
* evaluation of the first value of K.
*/
if (delta_n < Math::getTolerance()) {
delta_n = *delta_c_it / 1000.;
}
// loading
if (delta_n >= *delta_n_max_it) {
if (delta_n <= *delta_c_it) {
derivative = -(*sigma_c_it) / (delta_n * delta_n);
T = *sigma_c_it * (1 - delta_n / *delta_c_it);
} else {
derivative = 0.;
T = 0.;
}
// unloading-reloading
} else if (delta_n < *delta_n_max_it) {
Real T_max = *sigma_c_it * (1 - *delta_n_max_it / *delta_c_it);
derivative = 0.;
T = T_max / *delta_n_max_it * delta_n;
}
/// computation of the derivative of the constitutive law (dT/ddelta)
Matrix<Real, dim, dim> nn = n_outer_n * T / delta_n;
Vector<Real, dim> Delta_tilde =
normal_opening * (1. - this->beta2_kappa2) +
*opening_it * this->beta2_kappa2;
Matrix<Real, dim, dim> prov =
normal_opening * Delta_tilde.transpose() * derivative / delta_n + nn;
*tangent_it = prov.transpose();
}
derivative = 0.;
T = 0.;
/// TANGENT STIFFNESS FOR SHEAR TRACTIONS
delta_t = std::sqrt(delta_t);
/**
* Delta has to be different from 0 to have finite values of
* tangential stiffness. At the element insertion, delta =
* 0. Therefore, a fictictious value is defined, for the
* evaluation of the first value of K.
*/
if (delta_t < Math::getTolerance()) {
delta_t = *delta_c_it / 1000.;
}
// loading
if (delta_t >= *delta_t_max_it) {
if (delta_t <= *delta_c_it) {
derivative = -(*sigma_c_it) / (delta_t * delta_t);
T = *sigma_c_it * (1 - delta_t / *delta_c_it);
} else {
derivative = 0.;
T = 0.;
}
// unloading-reloading
} else if (delta_t < *delta_t_max_it) {
Real T_max = *sigma_c_it * (1 - *delta_t_max_it / *delta_c_it);
derivative = 0.;
T = T_max / *delta_t_max_it * delta_t;
}
/// computation of the derivative of the constitutive law (dT/ddelta)
auto I = (Matrix<Real, dim, dim>::Identity() - n_outer_n) * (T / delta_t);
auto && Delta_tilde = normal_opening * (delta_c2_R2 - this->beta2_kappa2) +
*opening_it * this->beta2_kappa2;
auto && Delta_hat = tangential_opening * this->beta2_kappa;
auto && prov =
Delta_hat * Delta_tilde.transpose() * derivative / delta_t + I;
*tangent_it += prov.transpose();
}
AKANTU_DEBUG_OUT();
}
/* -------------------------------------------------------------------------- */
template class MaterialCohesiveLinearUncoupled<1>;
template class MaterialCohesiveLinearUncoupled<2>;
template class MaterialCohesiveLinearUncoupled<3>;
static bool material_is_allocated_cohesive_linear_uncoupled =
instantiateMaterial<MaterialCohesiveLinearUncoupled>(
"cohesive_linear_uncoupled");
} // namespace akantu
c4science · Help