Homec4science
Diffusion akantu (features/changes-to-address-joss-review) Browse

rAKA/test/test_model/test_contact_mechanics_model/test_explicit_friction.cc
bacf19476747features/changes-to…

Last Change
Raw File

test_explicit_friction.cc
View Options

/* -------------------------------------------------------------------------- */
#include "contact_mechanics_model.hh"
#include "coupler_solid_contact.hh"
#include "non_linear_solver.hh"
#include "solid_mechanics_model.hh"
#include "surface_selector.hh"
/* -------------------------------------------------------------------------- */
using namespace akantu;
/* -------------------------------------------------------------------------- */
template<typename T>
std::vector<T> arrange(T start, T stop, T step = 1) {
std::vector<T> values;
for (T value = start; value <= stop; value += step)
values.push_back(value);
return values;
}
int main(int argc, char * argv[]) {
UInt max_normal_steps = 2500;
UInt max_shear_steps = 7500;
Real max_shear_displacement = 1e-1;
Real max_normal_displacement = 2e-2;
Real damping_ratio = 0.99;
std::string mesh_file = "sliding-block-2D.msh";
std::string material_file = "material-friction.dat";
const UInt spatial_dimension = 2;
initialize(material_file, argc, argv);
Mesh mesh(spatial_dimension);
mesh.read(mesh_file);
CouplerSolidContact coupler(mesh);
auto & solid = coupler.getSolidMechanicsModel();
auto & contact = coupler.getContactMechanicsModel();
auto && material_selector =
std::make_shared<MeshDataMaterialSelector<std::string>>("physical_names",
solid);
solid.setMaterialSelector(material_selector);
coupler.initFull(_analysis_method = _explicit_lumped_mass);
auto && surface_selector = std::make_shared<PhysicalSurfaceSelector>(mesh);
contact.getContactDetector().setSurfaceSelector(surface_selector);
solid.applyBC(BC::Dirichlet::FixedValue(0.0, _x), "lower");
solid.applyBC(BC::Dirichlet::FixedValue(0.0, _y), "lower");
Real time_step = solid.getStableTimeStep();
time_step *= 0.05;
coupler.setTimeStep(time_step);
std::cout << "Stable time increment : " << time_step << " sec " << std::endl;
coupler.setBaseName("explicit-friction");
coupler.addDumpFieldVector("displacement");
coupler.addDumpFieldVector("normals");
coupler.addDumpFieldVector("contact_force");
coupler.addDumpFieldVector("tangential_force");
coupler.addDumpFieldVector("external_force");
coupler.addDumpFieldVector("internal_force");
coupler.addDumpField("gaps");
coupler.addDumpField("areas");
coupler.addDumpField("blocked_dofs");
coupler.addDumpField("strain");
coupler.addDumpField("stress");
coupler.addDumpField("contact_state");
auto & velocity = solid.getVelocity();
auto & gaps = contact.getGaps();
auto xi = arrange<Real>(0, 1, 1./max_shear_steps);
std::vector<Real> shear_displacements;
std::transform(xi.begin(), xi.end(), std::back_inserter(shear_displacements),
[&](Real & p) -> Real {
return 0. + (max_shear_displacement)*pow(p, 3)*(10-15*p+ 6*pow(p,2)); });
auto normal_xi = arrange<Real>(0, 1, 1./max_normal_steps);
std::vector<Real> normal_displacements;
std::transform(normal_xi.begin(), normal_xi.end(), std::back_inserter(normal_displacements),
[&](Real & p) -> Real {
return 0. + (max_normal_displacement)*pow(p, 3)*(10-15*p+ 6*pow(p,2)); });
auto max_steps = max_normal_steps + max_shear_steps;
auto & contact_nodes = surface_selector->getSlaveList();
auto & tangential_traction = contact.getTangentialTractions();
for (UInt s : arange(max_steps)) {
if (s < max_normal_steps){
solid.applyBC(BC::Dirichlet::FixedValue(-normal_displacements[s], _y), "loading");
}
else {
solid.applyBC(BC::Dirichlet::FixedValue(shear_displacements[s - max_normal_steps], _x), "loading");
}
coupler.solveStep();
for(auto && tuple : zip(gaps,
make_view(velocity, spatial_dimension))){
auto & gap = std::get<0>(tuple);
auto & vel = std::get<1>(tuple);
if(gap > 0) {
vel *= damping_ratio;
}
}
if (s % 100 == 0) {
coupler.dump();
}
auto sum = std::accumulate(tangential_traction.begin(), tangential_traction.end(), 0.0);
auto num_tang_traction = std::abs(sum) / contact_nodes.size();
Real exp_tang_traction = 0.3*1.4e6;
Real error = std::abs(num_tang_traction - exp_tang_traction) / exp_tang_traction;
if (error > 1e-3 and num_tang_traction > exp_tang_traction){
std::cerr << error << "----" << num_tang_traction << std::endl;
return EXIT_FAILURE;
}
}
coupler.dump();
finalize();
return EXIT_SUCCESS;
}
c4science · Help