Diffusion akantu (features/fe2-orthodamage) Browse

fe2-orthodamage

material_cohesive_linear_sequential.cc
View Options

			/**
			* @file material_cohesive_linear_sequential.cc
			*
			* @author Emil Gallyamov <emil.gallyamov@epfl.ch>
			*
			* @date creation: Tue Feb 8 2022
			*
			* @brief Linear irreversible cohesive law of solved via sequential linear
			* analysis
			*
			* @section LICENSE
			*
			* Copyright (©) 2010-2018 EPFL (Ecole Polytechnique Fédérale de Lausanne)
			* Laboratory (LSMS - Laboratoire de Simulation en Mécanique des Solides)
			*
			* Akantu is free software: you can redistribute it and/or modify it under the
			* terms of the GNU Lesser General Public License as published by the Free
			* Software Foundation, either version 3 of the License, or (at your option) any
			* later version.
			*
			* Akantu is distributed in the hope that it will be useful, but WITHOUT ANY
			* WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
			* A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more
			* details.
			*
			* You should have received a copy of the GNU Lesser General Public License
			* along with Akantu. If not, see <http://www.gnu.org/licenses/>.
			*
			*/
			#include <boost/config.hpp>
			#include <boost/graph/adjacency_list.hpp>
			#include <boost/graph/connected_components.hpp>
			/* ------------------------------------------------------------------ */
			#include "material_cohesive_linear_sequential.hh"
			/* ------------------------------------------------------------------ */

			namespace akantu {

			/* ------------------------------------------------------------------ */
			template <UInt spatial_dimension>
			MaterialCohesiveLinearSequential<spatial_dimension>::
			MaterialCohesiveLinearSequential(SolidMechanicsModel & model, const ID & id)
			: MaterialCohesiveLinear<spatial_dimension>(model, id),
			scalar_tractions("scalar_tractions", *this),
			normal_tractions("normal_tractions", *this),
			effective_stresses("effective_stresses", *this) {
			this->registerParam("delta_deviation", delta_deviation, 0., _pat_parsmod,
			"Range within which quad points will be damaged");
			this->registerParam("reductions", reductions, _pat_parsmod,
			"Maximum number of reductions within SLA");
			this->registerParam("update_stiffness_on_damage", update_stiffness_on_damage,
			_pat_parsmod,
			"Flag for updating element stiffness on damage");
			}
			/* ------------------------------------------------------------------ */
			template <UInt spatial_dimension>
			void MaterialCohesiveLinearSequential<spatial_dimension>::initMaterial() {
			AKANTU_DEBUG_IN();

			MaterialCohesiveLinear<spatial_dimension>::initMaterial();

			scalar_tractions.initialize(1);
			normal_tractions.initialize(spatial_dimension);
			effective_stresses.initialize(1);
			this->damage.initializeHistory();

			AKANTU_DEBUG_OUT();
			}

			/* ------------------------------------------------------------------ */
			template <UInt spatial_dimension>
			void MaterialCohesiveLinearSequential<spatial_dimension>::checkInsertion(
			bool check_only) {
			AKANTU_DEBUG_IN();

			const Mesh & mesh_facets = this->model->getMeshFacets();

			for (auto && type_facet : mesh_facets.elementTypes(spatial_dimension - 1)) {

			// find the facet with the highest tensile stress
			auto max_stress_data = findCriticalFacet(type_facet);
			auto max_stress_facet = std::get<0>(max_stress_data);
			auto max_stress = std::get<1>(max_stress_data);
			auto crack_number = std::get<2>(max_stress_data);

			// communicate between processors the highest stress
			Real local_max_stress = max_stress;
			auto && comm = akantu::Communicator::getWorldCommunicator();
			comm.allReduce(max_stress, SynchronizerOperation::_max);

			// if the effective max stress is 0 or < 1 ->skip
			if (max_stress < 1)
			continue;

			// if the max stress at this proc != global max stress -> skip
			if (local_max_stress != max_stress)
			continue;

			// duplicate single facet and insert cohesive element
			std::map<UInt, UInt> facet_nb_crack_nb;
			facet_nb_crack_nb[max_stress_facet] = crack_number;
			insertCohesiveElements(facet_nb_crack_nb, type_facet, check_only);
			}

			AKANTU_DEBUG_OUT();
			}
			/* ------------------------------------------------------------------- */
			template <UInt spatial_dimension>
			void MaterialCohesiveLinearSequential<spatial_dimension>::computeTraction(
			const Array<Real> & normal, ElementType el_type, GhostType ghost_type) {
			AKANTU_DEBUG_IN();
			// define iterators
			auto traction_it =
			this->tractions(el_type, ghost_type).begin(spatial_dimension);
			auto opening_it = this->opening(el_type, ghost_type).begin(spatial_dimension);
			auto contact_traction_it =
			this->contact_tractions(el_type, ghost_type).begin(spatial_dimension);
			auto contact_opening_it =
			this->contact_opening(el_type, ghost_type).begin(spatial_dimension);
			auto normal_opening_norm_it =
			this->normal_opening_norm(el_type, ghost_type).begin();
			auto tangential_opening_norm_it =
			this->tangential_opening_norm(el_type, ghost_type).begin();

			auto normal_it = normal.begin(spatial_dimension);
			auto traction_end =
			this->tractions(el_type, ghost_type).end(spatial_dimension);
			auto sigma_c_it = this->sigma_c_eff(el_type, ghost_type).begin();
			auto delta_max_it = this->delta_max(el_type, ghost_type).begin();
			auto delta_c_it = this->delta_c_eff(el_type, ghost_type).begin();
			auto damage_it = this->damage(el_type, ghost_type).begin();
			auto insertion_stress_it =
			this->insertion_stress(el_type, ghost_type).begin(spatial_dimension);

			Vector<Real> normal_opening(spatial_dimension);
			Vector<Real> tangential_opening(spatial_dimension);

			// loop on each quadrature point
			for (UInt i = 0; traction_it != traction_end; ++traction_it, ++opening_it,
			++normal_it, ++sigma_c_it, ++delta_max_it, ++delta_c_it,
			++damage_it, ++contact_traction_it, ++insertion_stress_it,
			++contact_opening_it, ++normal_opening_norm_it,
			++tangential_opening_norm_it, ++i) {
			bool penetration{false};
			if (this->contact_after_breaking) {
			this->computeTractionOnQuad(
			traction_it, opening_it, normal_it, delta_max_it, *delta_c_it,
			insertion_stress_it, sigma_c_it, normal_opening, tangential_opening,
			normal_opening_norm_it, tangential_opening_norm_it, *damage_it,
			penetration, contact_traction_it, contact_opening_it);
			} else {
			this->computeSimpleTractionOnQuad(
			traction_it, opening_it, normal_it, delta_max_it, *delta_c_it,
			*sigma_c_it, normal_opening, tangential_opening,
			normal_opening_norm_it, tangential_opening_norm_it, *damage_it,
			contact_traction_it, contact_opening_it);
			}
			}

			AKANTU_DEBUG_OUT();
			}

			/* ------------------------------------------------------------------- */
			template <UInt spatial_dimension>
			void MaterialCohesiveLinearSequential<
			spatial_dimension>::computeTangentTraction(ElementType el_type,
			Array<Real> & tangent_matrix,
			const Array<Real> & normal,
			GhostType ghost_type) {
			AKANTU_DEBUG_IN();
			// define iterators
			auto tangent_it = tangent_matrix.begin(spatial_dimension, spatial_dimension);

			auto tangent_end = tangent_matrix.end(spatial_dimension, spatial_dimension);

			auto normal_it = normal.begin(spatial_dimension);

			auto normal_opening_norm_it =
			this->normal_opening_norm(el_type, ghost_type).begin();
			auto tangential_opening_norm_it =
			this->tangential_opening_norm(el_type, ghost_type).begin();

			// NB: delta_max_it points on delta_max_previous, i.e. the
			// delta_max related to the solution of the previous incremental
			// step
			auto delta_max_it = this->delta_max(el_type, ghost_type).begin();
			auto sigma_c_it = this->sigma_c_eff(el_type, ghost_type).begin();
			auto delta_c_it = this->delta_c_eff(el_type, ghost_type).begin();
			auto damage_it = this->damage(el_type, ghost_type).begin();
			auto prev_damage_it = this->damage.previous(el_type, ghost_type).begin();

			for (UInt i = 0; tangent_it != tangent_end; ++tangent_it, ++normal_it,
			++delta_max_it, ++sigma_c_it, ++delta_c_it, ++damage_it,
			++prev_damage_it, ++normal_opening_norm_it,
			++tangential_opening_norm_it, ++i) {
			if (this->contact_after_breaking) {
			this->computeTangentTractionOnQuad(
			tangent_it, delta_max_it, delta_c_it, sigma_c_it, *normal_it,
			normal_opening_norm_it, tangential_opening_norm_it, *damage_it);
			} else {
			this->computeSecantTractionOnQuad(tangent_it, delta_max_it, *delta_c_it,
			sigma_c_it, normal_it);
			}
			}

			// control over stiffness update between iterations
			setUpdateStiffness(false);

			AKANTU_DEBUG_OUT();
			}
			/* ------------------------------------------------------------------- */
			template <UInt spatial_dimension>
			UInt MaterialCohesiveLinearSequential<spatial_dimension>::updateDeltaMax(
			ElementType el_type, GhostType ghost_type) {
			AKANTU_DEBUG_IN();
			// define iterators
			auto normal_opening_norm_it =
			this->normal_opening_norm(el_type, ghost_type).begin();
			auto normal_opening_norm_end =
			this->normal_opening_norm(el_type, ghost_type).end();
			auto tangential_opening_norm_it =
			this->tangential_opening_norm(el_type, ghost_type).begin();

			auto delta_max_it = this->delta_max(el_type, ghost_type).begin();
			auto delta_c_it = this->delta_c_eff(el_type, ghost_type).begin();
			auto damage_it = this->damage(el_type, ghost_type).begin();

			Vector<Real> normal_opening(spatial_dimension);
			Vector<Real> tangential_opening(spatial_dimension);

			// loop on each quadrature point
			UInt nb_updated_quads(0);
			for (UInt i = 0; normal_opening_norm_it != normal_opening_norm_end;
			++normal_opening_norm_it, ++tangential_opening_norm_it, ++damage_it,
			++delta_max_it, ++delta_c_it, ++i) {
			auto delta_max_increased = this->updateDeltaMaxOnQuad(
			normal_opening_norm_it, tangential_opening_norm_it, *damage_it,
			delta_max_it, delta_c_it);
			if (delta_max_increased)
			nb_updated_quads++;
			}

			if (nb_updated_quads and this->update_stiffness_on_damage)
			setUpdateStiffness(true);

			AKANTU_DEBUG_OUT();
			return nb_updated_quads;
			}

			/* ------------------------------------------------------------------- */
			template <UInt spatial_dimension>
			std::tuple<Real, Element, UInt>
			MaterialCohesiveLinearSequential<spatial_dimension>::computeMaxDeltaMaxExcess(
			ElementType el_type, GhostType ghost_type) {
			AKANTU_DEBUG_IN();

			UInt nb_quad_cohesive = this->model->getFEEngine("CohesiveFEEngine")
			.getNbIntegrationPoints(el_type);

			// define iterators
			auto normal_opening_norm_it =
			this->normal_opening_norm(el_type, ghost_type).begin();
			auto normal_opening_norm_end =
			this->normal_opening_norm(el_type, ghost_type).end();
			auto tangential_opening_norm_it =
			this->tangential_opening_norm(el_type, ghost_type).begin();

			auto delta_max_it = this->delta_max(el_type, ghost_type).begin();
			auto delta_c_it = this->delta_c_eff(el_type, ghost_type).begin();
			auto damage_it = this->damage(el_type, ghost_type).begin();
			auto && element_filter = this->element_filter(el_type, ghost_type);

			Real max_delta_max_excess{0};
			// loop on each quadrature point
			Element critical_coh_el{ElementNull};
			UInt nb_penetr_quads{0};
			for (UInt i = 0; normal_opening_norm_it != normal_opening_norm_end;
			++normal_opening_norm_it, ++tangential_opening_norm_it, ++damage_it,
			++delta_max_it, ++delta_c_it, ++i) {
			UInt el_nb = floor(i / nb_quad_cohesive);
			bool penetration{false};
			auto delta_max_excess = this->computeDeltaMaxExcessOnQuad(
			normal_opening_norm_it, tangential_opening_norm_it, *damage_it,
			delta_max_it, delta_c_it, penetration);
			if (delta_max_excess > max_delta_max_excess) {
			max_delta_max_excess = delta_max_excess;
			critical_coh_el.element = element_filter(el_nb);
			critical_coh_el.type = el_type;
			critical_coh_el.ghost_type = ghost_type;
			}
			if (penetration)
			nb_penetr_quads++;
			}

			AKANTU_DEBUG_OUT();
			return std::make_tuple(max_delta_max_excess, critical_coh_el,
			nb_penetr_quads);
			}
			/* ----------------------------------------------------------------- */
			template <UInt spatial_dimension>
			std::tuple<UInt, Real, UInt>
			MaterialCohesiveLinearSequential<spatial_dimension>::findCriticalFacet(
			const ElementType & type_facet) {
			AKANTU_DEBUG_IN();

			Mesh & mesh = this->model->getMesh();
			const Mesh & mesh_facets = this->model->getMeshFacets();
			const auto & pos = mesh.getNodes();
			const auto pos_it = make_view(pos, spatial_dimension).begin();
			CohesiveElementInserter & inserter = this->model->getElementInserter();

			Array<Element> candidate_facets;
			Array<UInt> coh_crack_nbs;
			Array<Real> highest_stresses;
			Array<UInt> coh_neighbors_nb;
			std::set<Element> crack_contour;
			auto output =
			std::make_tuple(UInt(-1), std::numeric_limits<Real>::min(), UInt(-1));

			ElementType type_cohesive = FEEngine::getCohesiveElementType(type_facet);
			const auto & facets_check = inserter.getCheckFacets(type_facet);
			auto & f_filter = this->facet_filter(type_facet);
			auto & scal_tractions = scalar_tractions(type_facet);
			auto & norm_tractions = normal_tractions(type_facet);
			const auto & f_stress = this->model->getStressOnFacets(type_facet);
			const auto & sigma_limits = this->sigma_c(type_facet);
			auto & eff_stresses = effective_stresses(type_facet);

			UInt nb_quad_facet = this->model->getFEEngine("FacetsFEEngine")
			.getNbIntegrationPoints(type_facet);

			#ifndef AKANTU_NDEBUG
			UInt nb_quad_cohesive = this->model->getFEEngine("CohesiveFEEngine")
			.getNbIntegrationPoints(type_cohesive);

			AKANTU_DEBUG_ASSERT(nb_quad_cohesive == nb_quad_facet,
			"The cohesive element and the corresponding facet do "
			"not have the same numbers of integration points");
			#endif
			// skip if no facets of this type are present
			UInt nb_facet = f_filter.size();
			if (nb_facet == 0)
			return output;

			Matrix<Real> stress_tmp(spatial_dimension, spatial_dimension);
			UInt sp2 = spatial_dimension * spatial_dimension;

			const auto & tangents = this->model->getTangents(type_facet);
			const auto & normals = this->model->getFEEngine("FacetsFEEngine")
			.getNormalsOnIntegrationPoints(type_facet);
			auto normal_begin = normals.begin(spatial_dimension);
			auto tangent_begin = tangents.begin(tangents.getNbComponent());
			auto facet_stress_begin =
			f_stress.begin(spatial_dimension, spatial_dimension * 2);

			// loop over each facet belonging to this material
			for (auto && data :
			zip(f_filter, sigma_limits, eff_stresses,
			make_view(scal_tractions, nb_quad_facet),
			make_view(norm_tractions, spatial_dimension, nb_quad_facet))) {
			auto facet_nb = std::get<0>(data);
			Element facet{type_facet, facet_nb, _not_ghost};
			auto & sigma_limit = std::get<1>(data);
			auto & eff_stress = std::get<2>(data);
			auto & stress_check = std::get<3>(data);
			auto & normal_traction = std::get<4>(data);

			// skip facets where check shouldn't be inserted (or already inserted)
			if (!facets_check(facet_nb))
			continue;

			// compute the effective norm on each quadrature point of the facet
			for (UInt q : arange(nb_quad_facet)) {
			UInt current_quad = facet_nb * nb_quad_facet + q;
			const Vector<Real> & normal = normal_begin[current_quad];
			const Vector<Real> & tangent = tangent_begin[current_quad];
			const Matrix<Real> & facet_stress_it = facet_stress_begin[current_quad];

			// compute average stress on the current quadrature point
			Matrix<Real> stress_1(facet_stress_it.storage(), spatial_dimension,
			spatial_dimension);

			Matrix<Real> stress_2(facet_stress_it.storage() + sp2, spatial_dimension,
			spatial_dimension);

			stress_tmp.copy(stress_1);
			stress_tmp += stress_2;
			stress_tmp /= 2.;

			Vector<Real> normal_traction_vec(normal_traction(q));

			// compute normal and effective stress
			stress_check(q) = this->computeEffectiveNorm(stress_tmp, normal, tangent,
			normal_traction_vec);
			}

			// verify if the effective stress overcomes the threshold
			Real final_stress = stress_check.mean();

			// normalize by the limit stress and skip non-stressed facets
			eff_stress = final_stress / sigma_limit;
			if (eff_stress < 1)
			continue;

			// check to how many cohesive elements this facet is connected
			const Vector<Element> & sub_to_facet =
			mesh_facets.getSubelementToElement(facet);
			std::vector<std::set<Element>> coh_neighbors(sub_to_facet.size());

			for (auto && data : enumerate(sub_to_facet)) {
			auto & subel = std::get<1>(data);
			auto & i = std::get<0>(data);
			auto & connected_elements_dim_min_1 =
			mesh_facets.getElementToSubelement(subel);
			for (auto & connected_element_dim_min_1 : connected_elements_dim_min_1) {
			auto & connected_elements_dim =
			mesh_facets.getElementToSubelement(connected_element_dim_min_1);
			for (auto & connected_element_dim : connected_elements_dim) {
			if (mesh.getKind(connected_element_dim.type) == _ek_cohesive) {
			coh_neighbors[i].emplace(connected_element_dim);
			crack_contour.insert(subel);
			}
			}
			}
			}

			// see if a single tip crack is present
			Array<UInt> single_tip_subs;
			for (UInt i : arange(sub_to_facet.size())) {
			if (coh_neighbors[i].size() == 1) {
			single_tip_subs.push_back(i);
			// experimental feature (all neighbors have to be single tips)
			} else if (coh_neighbors[i].size() > 1) {
			goto endloop;
			}
			}

			// if no coh els are connected - skip facet
			if (not single_tip_subs.size())
			goto endloop;

			// compute distances between barycenters and sharp angles between
			// facets; condition distance and angle
			UInt potential_crack_nb;
			for (auto tip_sub : single_tip_subs) {
			auto coh_el = *coh_neighbors[tip_sub].begin();
			auto & crack_numbers =
			mesh.getData<UInt>("crack_numbers", coh_el.type, coh_el.ghost_type);
			potential_crack_nb = crack_numbers(coh_el.element);

			// get inscribed diameter
			Real facet_indiam =
			MeshUtils::getInscribedCircleDiameter(*(this->model), facet);

			// get distance between two barycenters
			auto facet_to_coh_el = mesh_facets.getSubelementToElement(coh_el)(0);
			auto dist = MeshUtils::distanceBetweenIncentersCorrected(
			mesh_facets, facet, facet_to_coh_el);

			// ad-hoc rule on barycenters spacing
			// it should discard all elements under sharp angle
			// factor 0.8 is based on the optimal results
			if (dist < 0.8 * facet_indiam)
			goto endloop;

			// find facets bounding cohesive element
			const Vector<Element> & facets_to_cohesive =
			mesh_facets.getSubelementToElement(coh_el);
			// compute abs(dot) product between 2 normals & discard sharp angle
			Real dot = MeshUtils::cosSharpAngleBetween2Facets(*(this->model), facet,
			facets_to_cohesive(0));

			// value 0.7 is based on the optimal results
			if (dot < 0.7)
			goto endloop;
			}

			// add a candidate facet into a pool
			candidate_facets.push_back(facet);
			coh_crack_nbs.push_back(potential_crack_nb);
			highest_stresses.push_back(eff_stress);
			coh_neighbors_nb.push_back(single_tip_subs.size());

			endloop:;
			}
			if (not candidate_facets.size())
			return output;

			// insert element with the highest stress
			std::map<Real, UInt> stress_map;
			for (UInt i : arange(highest_stresses.size())) {
			stress_map.emplace(highest_stresses(i), i);
			}
			auto critical_facet_pos = stress_map.rbegin()->second;
			output = std::make_tuple(candidate_facets(critical_facet_pos).element,
			highest_stresses(critical_facet_pos),
			coh_crack_nbs(critical_facet_pos));

			return output;
			}

			/* ----------------------------------------------------------------- */

			template <UInt spatial_dimension>
			std::map<UInt, UInt> MaterialCohesiveLinearSequential<spatial_dimension>::
			findCriticalFacetsOnContour(
			const std::map<Element, Element> & contour_subfacets_coh_el,
			const std::map<Element, UInt> & surface_subfacets_crack_nb,
			const std::set<UInt> & contour_nodes,
			const std::set<UInt> & surface_nodes) {
			AKANTU_DEBUG_IN();

			const Mesh & mesh = this->model->getMesh();
			const Mesh & mesh_facets = this->model->getMeshFacets();
			UInt current_mat_index = this->model->getMaterialIndex(this->getName());
			// map is necessary to keep facet nbs sorted (otherwise insertion is messed
			// up)
			std::map<UInt, UInt> facet_nbs_crack_nbs;
			std::set<UInt> facet_nbs;
			std::set<Element> visited_facets;

			// TODO : make iteration on multiple facet types
			auto type_facet = *mesh_facets.elementTypes(spatial_dimension - 1).begin();
			ElementType type_cohesive = FEEngine::getCohesiveElementType(type_facet);
			auto & f_filter = this->facet_filter(type_facet);
			// skip if no facets of this type are present
			if (not f_filter.size()) {
			return facet_nbs_crack_nbs;
			}

			UInt nb_quad_facet = this->model->getFEEngine("FacetsFEEngine")
			.getNbIntegrationPoints(type_facet);
			#ifndef AKANTU_NDEBUG
			UInt nb_quad_cohesive = this->model->getFEEngine("CohesiveFEEngine")
			.getNbIntegrationPoints(type_cohesive);

			AKANTU_DEBUG_ASSERT(nb_quad_cohesive == nb_quad_facet,
			"The cohesive element and the corresponding facet do "
			"not have the same numbers of integration points");
			#endif
			CohesiveElementInserter & inserter = this->model->getElementInserter();
			const auto & facets_check = inserter.getCheckFacets(type_facet);
			auto & scal_tractions = scalar_tractions(type_facet);
			auto & norm_tractions = normal_tractions(type_facet);
			const auto & f_stress = this->model->getStressOnFacets(type_facet);
			const auto & sigma_limits = this->sigma_c(type_facet);
			auto & eff_stresses = effective_stresses(type_facet);
			const auto & tangents = this->model->getTangents(type_facet);
			const auto & normals = this->model->getFEEngine("FacetsFEEngine")
			.getNormalsOnIntegrationPoints(type_facet);
			auto scal_tractions_it =
			scal_tractions.begin_reinterpret(nb_quad_facet, f_filter.size());
			auto norm_tractions_it = norm_tractions.begin_reinterpret(
			spatial_dimension, nb_quad_facet, f_filter.size());
			auto normal_it = normals.begin(spatial_dimension);
			auto tangent_it = tangents.begin(tangents.getNbComponent());
			auto facet_stress_it =
			f_stress.begin(spatial_dimension, spatial_dimension * 2);

			Matrix<Real> stress_tmp(spatial_dimension, spatial_dimension);
			UInt sp2 = spatial_dimension * spatial_dimension;

			for (auto && pair : contour_subfacets_coh_el) {
			auto & contour_el = pair.first;
			auto & coh_el = pair.second;

			Real max_stress = std::numeric_limits<Real>::min();
			Element max_stress_facet{ElementNull};
			auto & facets_to_contour = mesh_facets.getElementToSubelement(contour_el);
			// identify the crack number and cohesive nodes
			UInt crack_nb = mesh.getData<UInt>("crack_numbers", coh_el.type,
			coh_el.ghost_type)(coh_el.element);

			auto && coh_facets_vec = mesh_facets.getSubelementToElement(coh_el);
			Array<Element> coh_facets;
			for (auto coh_facet : coh_facets_vec) {
			auto && subfacets = mesh_facets.getSubelementToElement(coh_facet);
			auto ret = std::find(subfacets.storage(),
			subfacets.storage() + subfacets.size(), contour_el);
			if (ret == subfacets.storage() + subfacets.size())
			continue;
			coh_facets.push_back(coh_facet);
			}

			Vector<UInt> cohesive_nodes = mesh.getConnectivity(coh_el);
			AKANTU_DEBUG_ASSERT(coh_facets.size(),
			"Cohesive element on countour not identified");

			// proceed to identifying the potential insertion facet
			for (auto & facet : facets_to_contour) {
			// check if the facet was already visited
			auto ret = visited_facets.emplace(facet);
			if (not ret.second)
			continue;

			// skip ghost facets
			if (facet.ghost_type == _ghost) {
			continue;
			}

			// skip cohesive facets
			if (coh_facets.find(facet) != UInt(-1)) {
			continue;
			}

			// check if the facet belongs to this material
			auto & facet_mat_index = this->model->getFacetMaterial(
			facet.type, facet.ghost_type)(facet.element);
			if (facet_mat_index != current_mat_index) {
			continue;
			}

			// check on check_facets
			if (not facets_check(facet.element)) {
			nextfacet:;
			continue;
			}

			// discard facets intersecting crack surface (unless different cracks)
			auto && subfacet_to_facet = mesh_facets.getSubelementToElement(facet);
			for (auto & subfacet : subfacet_to_facet) {
			auto ret = surface_subfacets_crack_nb.find(subfacet);
			if (ret != surface_subfacets_crack_nb.end()) {
			if (crack_nb == ret->second) {
			goto nextfacet;
			}
			}
			}

			// discard facets touching the surface
			Vector<UInt> facet_nodes = mesh_facets.getConnectivity(facet);
			for (auto & facet_node : facet_nodes) {
			if (surface_nodes.find(facet_node) != surface_nodes.end()) {
			goto nextfacet;
			}
			}

			// discard facets touching the contour
			UInt nb_subfacets_on_contour(0);
			for (auto & subfacet : subfacet_to_facet) {
			if (contour_subfacets_coh_el.find(subfacet) !=
			contour_subfacets_coh_el.end()) {
			nb_subfacets_on_contour++;
			}
			}
			if (nb_subfacets_on_contour == 1) {
			UInt nb_nodes_on_contour(0);
			Vector<UInt> facet_nodes = mesh_facets.getConnectivity(facet);
			for (auto & facet_node : facet_nodes) {
			if (contour_nodes.find(facet_node) != contour_nodes.end()) {
			nb_nodes_on_contour++;
			}
			}
			if (nb_nodes_on_contour == 3) {
			goto nextfacet;
			}
			}

			// discard facets under sharp angle with crack
			Real facet_indiam =
			MeshUtils::getInscribedCircleDiameter(*(this->model), facet);
			auto dist = MeshUtils::distanceBetweenIncentersCorrected(
			mesh_facets, facet, coh_facets[0]);
			// ad-hoc rule on barycenters spacing
			// it should discard all elements under sharp angle
			if (dist < 0.8 * facet_indiam) {
			continue;
			}

			// compute abs(dot) product between 2 normals & discard sharp angle
			Real dot = MeshUtils::cosSharpAngleBetween2Facets(*(this->model), facet,
			coh_facets[0]);
			if (dot < 0.8) {
			continue;
			}

			// check stress
			auto facet_local_nb = f_filter.find(facet.element);
			auto & sigma_limit = sigma_limits(facet_local_nb);
			auto & eff_stress = eff_stresses(facet_local_nb);
			Vector<Real> stress_check(scal_tractions_it[facet_local_nb]);
			Matrix<Real> normal_traction(norm_tractions_it[facet_local_nb]);

			// compute the effective norm on each quadrature point of the facet
			for (UInt q : arange(nb_quad_facet)) {
			UInt current_quad = facet.element * nb_quad_facet + q;
			const Vector<Real> & normal = normal_it[current_quad];
			const Vector<Real> & tangent = tangent_it[current_quad];
			const Matrix<Real> & facet_stress = facet_stress_it[current_quad];

			// compute average stress on the current quadrature point
			Matrix<Real> stress_1(facet_stress.storage(), spatial_dimension,
			spatial_dimension);

			Matrix<Real> stress_2(facet_stress.storage() + sp2, spatial_dimension,
			spatial_dimension);

			stress_tmp.copy(stress_1);
			stress_tmp += stress_2;
			stress_tmp /= 2.;

			Vector<Real> normal_traction_vec(normal_traction(q));

			// compute normal and effective stress
			stress_check(q) = this->computeEffectiveNorm(
			stress_tmp, normal, tangent, normal_traction_vec);
			}

			// verify if the effective stress overcomes the threshold
			Real final_stress = stress_check.mean();

			// normalize by the limit stress and skip non-stressed facets
			eff_stress = final_stress / sigma_limit;

			if (eff_stress < 1)
			continue;

			// determine the most stressed facet connected to this contour
			if (eff_stress > max_stress) {
			max_stress = eff_stress;
			max_stress_facet = facet;
			}
			}
			if (max_stress_facet != ElementNull) {
			auto ret = facet_nbs.emplace(max_stress_facet.element);
			if (ret.second) {
			facet_nbs_crack_nbs[max_stress_facet.element] = crack_nb;
			}
			}
			}
			return facet_nbs_crack_nbs;
			}

			/* ----------------------------------------------------------------- */
			template <UInt spatial_dimension>
			void MaterialCohesiveLinearSequential<
			spatial_dimension>::computeEffectiveStresses() {

			AKANTU_DEBUG_IN();

			const Mesh & mesh_facets = this->model->getMeshFacets();

			for (auto && type_facet : mesh_facets.elementTypes(spatial_dimension - 1)) {

			ElementType type_cohesive = FEEngine::getCohesiveElementType(type_facet);
			auto & f_filter = this->facet_filter(type_facet);
			// skip if no facets of this type are present
			if (not f_filter.size()) {
			return;
			}

			UInt nb_quad_facet = this->model->getFEEngine("FacetsFEEngine")
			.getNbIntegrationPoints(type_facet);
			#ifndef AKANTU_NDEBUG
			UInt nb_quad_cohesive = this->model->getFEEngine("CohesiveFEEngine")
			.getNbIntegrationPoints(type_cohesive);

			AKANTU_DEBUG_ASSERT(nb_quad_cohesive == nb_quad_facet,
			"The cohesive element and the corresponding facet do "
			"not have the same numbers of integration points");
			#endif
			auto & scal_tractions = scalar_tractions(type_facet);
			auto & norm_tractions = normal_tractions(type_facet);
			const auto & f_stress = this->model->getStressOnFacets(type_facet);
			const auto & sigma_limits = this->sigma_c(type_facet);
			auto & eff_stresses = effective_stresses(type_facet);
			const auto & tangents = this->model->getTangents(type_facet);
			const auto & normals = this->model->getFEEngine("FacetsFEEngine")
			.getNormalsOnIntegrationPoints(type_facet);
			auto scal_tractions_it =
			scal_tractions.begin_reinterpret(nb_quad_facet, f_filter.size());
			auto norm_tractions_it = norm_tractions.begin_reinterpret(
			spatial_dimension, nb_quad_facet, f_filter.size());
			auto normal_it = normals.begin(spatial_dimension);
			auto tangent_it = tangents.begin(tangents.getNbComponent());
			auto facet_stress_it =
			f_stress.begin(spatial_dimension, spatial_dimension * 2);

			Matrix<Real> stress_tmp(spatial_dimension, spatial_dimension);
			UInt sp2 = spatial_dimension * spatial_dimension;

			for (auto && data : enumerate(f_filter)) {
			auto facet_local_nb = std::get<0>(data);
			auto facet_global_nb = std::get<1>(data);
			auto & sigma_limit = sigma_limits(facet_local_nb);
			auto & eff_stress = eff_stresses(facet_local_nb);
			Vector<Real> stress_check(scal_tractions_it[facet_local_nb]);
			Matrix<Real> normal_traction(norm_tractions_it[facet_local_nb]);

			// compute the effective norm on each quadrature point of the facet
			for (UInt q : arange(nb_quad_facet)) {
			UInt current_quad = facet_global_nb * nb_quad_facet + q;
			const Vector<Real> & normal = normal_it[current_quad];
			const Vector<Real> & tangent = tangent_it[current_quad];
			const Matrix<Real> & facet_stress = facet_stress_it[current_quad];

			// compute average stress on the current quadrature point
			Matrix<Real> stress_1(facet_stress.storage(), spatial_dimension,
			spatial_dimension);

			Matrix<Real> stress_2(facet_stress.storage() + sp2, spatial_dimension,
			spatial_dimension);

			stress_tmp.copy(stress_1);
			stress_tmp += stress_2;
			stress_tmp /= 2.;

			Vector<Real> normal_traction_vec(normal_traction(q));

			// compute normal and effective stress
			stress_check(q) = this->computeEffectiveNorm(
			stress_tmp, normal, tangent, normal_traction_vec);
			}

			// verify if the effective stress overcomes the threshold
			Real final_stress = stress_check.mean();

			// normalize by the limit stress and skip non-stressed facets
			eff_stress = final_stress / sigma_limit;
			}
			}
			}

			/* ----------------------------------------------------------------- */
			template <UInt spatial_dimension>
			std::map<UInt, UInt>
			MaterialCohesiveLinearSequential<spatial_dimension>::findHolesOnContour(
			std::map<Element, Element> & contour_subfacets_coh_el,
			const std::map<Element, UInt> & /surface_subfacets_crack_nb/,
			const std::set<UInt> & /surface_nodes/) {
			AKANTU_DEBUG_IN();
			Mesh & mesh = this->model->getMesh();
			const Mesh & mesh_facets = this->model->getMeshFacets();
			CohesiveElementInserter & inserter = this->model->getElementInserter();
			UInt current_mat_index = this->model->getMaterialIndex(this->getName());

			std::map<UInt, UInt> facet_nbs_crack_nbs;
			std::map<UInt, std::set<Element>> facet_contour_subfacets;
			std::map<UInt, UInt> facet_crack_nb;
			std::set<Element> facet_pool;

			// TODO : make iteration on multiple facet types
			auto type_facet = *mesh_facets.elementTypes(spatial_dimension - 1).begin();
			auto type_cohesive = FEEngine::getCohesiveElementType(type_facet);
			UInt nb_quad_facet = this->model->getFEEngine("FacetsFEEngine")
			.getNbIntegrationPoints(type_facet);
			const auto & facets_check = inserter.getCheckFacets(type_facet);
			auto & f_filter = this->facet_filter(type_facet);

			#ifndef AKANTU_NDEBUG
			UInt nb_quad_cohesive = this->model->getFEEngine("CohesiveFEEngine")
			.getNbIntegrationPoints(type_cohesive);

			AKANTU_DEBUG_ASSERT(nb_quad_cohesive == nb_quad_facet,
			"The cohesive element and the corresponding facet do "
			"not have the same numbers of integration points");
			#endif
			// skip if no facets of this type are present
			UInt nb_facet = f_filter.size();
			if (nb_facet == 0)
			return facet_nbs_crack_nbs;

			for (auto && pair : contour_subfacets_coh_el) {
			auto & contour_el = pair.first;
			auto & coh_el = pair.second;
			auto & facets_to_contour = mesh_facets.getElementToSubelement(contour_el);
			// identify the crack number and cohesive nodes
			UInt crack_nb = mesh.getData<UInt>("crack_numbers", coh_el.type,
			coh_el.ghost_type)(coh_el.element);
			auto && coh_facets_vec = mesh_facets.getSubelementToElement(coh_el);
			Array<Element> coh_facets;
			for (auto coh_facet : coh_facets_vec) {
			auto && subfacets = mesh_facets.getSubelementToElement(coh_facet);
			auto ret = std::find(subfacets.storage(),
			subfacets.storage() + subfacets.size(), contour_el);
			if (ret == subfacets.storage() + subfacets.size())
			continue;
			coh_facets.push_back(coh_facet);
			}
			AKANTU_DEBUG_ASSERT(coh_facets.size(),
			"Cohesive element on countour not identified");

			// proceed to identifying the potential insertion facet
			for (auto & facet : facets_to_contour) {

			// skip ghost facets
			if (facet.ghost_type == _ghost) {
			continue;
			}

			// skip cohesive facets
			if (coh_facets.find(facet) != UInt(-1)) {
			continue;
			}

			// check if the facet belongs to this material
			auto & facet_mat_index = this->model->getFacetMaterial(
			facet.type, facet.ghost_type)(facet.element);
			if (facet_mat_index != current_mat_index) {
			continue;
			}
			// check check_facets
			if (not facets_check(facet.element)) {
			continue;
			}

			// discard facets under sharp angle with crack
			Real facet_indiam =
			MeshUtils::getInscribedCircleDiameter(*(this->model), facet);
			auto dist = MeshUtils::distanceBetweenIncentersCorrected(
			mesh_facets, facet, coh_facets[0]);
			// ad-hoc rule on barycenters spacing
			// it should discard all elements under sharp angle
			if (dist < 0.8 * facet_indiam) {
			continue;
			}

			// avoid facets under sharp angles with their cohesives
			Real dot = MeshUtils::cosSharpAngleBetween2Facets(*(this->model), facet,
			coh_facets[0]);
			if (dot < 0.8)
			continue;

			// add facet into the map
			facet_contour_subfacets[facet.element].emplace(contour_el);
			facet_crack_nb[facet.element] = crack_nb;
			// add all passed facets into the pool
			facet_pool.emplace(facet);
			}
			}

			// get all facets having more than 1 connection to the contour
			// and clean facet_pool from the facets connected to these contours
			for (auto it = facet_contour_subfacets.begin();
			it != facet_contour_subfacets.end(); it++) {
			if (it->second.size() > 1) {
			facet_nbs_crack_nbs[it->first] = facet_crack_nb[it->first];

			// delete facets connected to above subfacets from the pool
			Element facet{type_facet, it->first, _not_ghost};
			for (auto & contour_subf : it->second) {
			auto & facets_to_taken_contour =
			mesh_facets.getElementToSubelement(contour_subf);
			for (auto & facet_to_taken_contour : facets_to_taken_contour) {
			if (facet_to_taken_contour == facet)
			continue;
			facet_pool.erase(facet_to_taken_contour);
			}
			}
			}
			}

			// determine all interconnected holes
			// initialize a graph
			typedef boost::adjacency_list<boost::vecS, boost::vecS, boost::undirectedS>
			Graph;
			Graph graph;
			// fill the graph in
			auto first = facet_pool.begin();
			for (auto it1 = first; it1 != facet_pool.end(); it1++) {
			// insert a single edge
			boost::add_edge(std::distance(first, it1), std::distance(first, it1),
			graph);
			for (auto it2 = std::next(it1); it2 != facet_pool.end(); it2++) {
			auto data = MeshUtils::areFacetsConnected(mesh_facets, it1, it2);
			// facets are not connected
			if (not std::get<0>(data))
			continue;
			// connected but through the current crack tip
			for (auto & shared_sub : std::get<1>(data)) {
			if (contour_subfacets_coh_el.find(shared_sub) !=
			contour_subfacets_coh_el.end()) {
			goto endloop;
			}
			}
			// otherwise properly connected;
			boost::add_edge(std::distance(first, it1), std::distance(first, it2),
			graph);
			endloop:;
			}
			}
			// connectivity and number of components of a graph
			std::vector<int> components(boost::num_vertices(graph));
			boost::connected_components(graph, &components[0]);
			if (not components.size()) {
			return facet_nbs_crack_nbs;
			}
			// compute component sizes
			std::map<int, UInt> components_size;
			for (auto component : components) {
			components_size[component]++;
			}
			// insert all components with size > 1
			for (auto it = first; it != facet_pool.end(); it++) {
			auto component = components[std::distance(first, it)];
			if (components_size[component] <= 1)
			continue;
			// otherwise insert this facet as it is a godly act
			facet_nbs_crack_nbs[it->element] = facet_crack_nb[it->element];
			}
			AKANTU_DEBUG_OUT();
			return facet_nbs_crack_nbs;
			}

			/* ----------------------------------------------------------------- */
			template <UInt spatial_dimension>
			std::tuple<std::map<Element, Element>, std::map<Element, UInt>, std::set<UInt>,
			std::set<UInt>>
			MaterialCohesiveLinearSequential<spatial_dimension>::determineCrackSurface() {
			AKANTU_DEBUG_IN();

			Mesh & mesh = this->model->getMesh();
			const Mesh & mesh_facets = this->model->getMeshFacets();
			std::map<Element, Element> contour_subfacets_coh_el;
			std::map<Element, UInt> surface_subfacets_crack_nb;
			std::set<UInt> surface_nodes;
			std::set<UInt> contour_nodes;
			std::set<Element> visited_subfacets;

			// first loop on facets (doesn't include duplicated ones)
			for (auto & type_facet :
			mesh.elementTypes(spatial_dimension - 1, _not_ghost, _ek_regular)) {
			auto & filter = this->facet_filter(type_facet);
			if (filter.empty()) {
			continue;
			}

			for (auto & facet_nb : filter) {
			Element facet{type_facet, facet_nb, _not_ghost};
			auto && subfacets_to_facet = mesh_facets.getSubelementToElement(facet);
			for (auto & subfacet : subfacets_to_facet) {
			auto ret = visited_subfacets.emplace(subfacet);
			if (not ret.second)
			continue;

			std::set<Element> connected_cohesives;
			auto && facets_to_subfacet =
			mesh_facets.getElementToSubelement(subfacet);
			for (auto & facet : facets_to_subfacet) {
			auto & connected_to_facet = mesh_facets.getElementToSubelement(facet);
			for (auto & connected_el : connected_to_facet) {
			if (connected_el.type == _not_defined)
			goto nextfacet;
			if (mesh.getKind(connected_el.type) == _ek_cohesive) {
			connected_cohesives.emplace(connected_el);
			}
			}
			nextfacet:;
			}
			if (connected_cohesives.size() == 1) {
			contour_subfacets_coh_el[subfacet] = *connected_cohesives.begin();
			Vector<UInt> contour_subfacet_nodes =
			mesh_facets.getConnectivity(subfacet);
			for (auto & contour_subfacet_node : contour_subfacet_nodes) {
			contour_nodes.emplace(contour_subfacet_node);
			}
			} else if (connected_cohesives.size() > 1) {
			auto coh_element = *connected_cohesives.begin();
			UInt crack_nb =
			mesh.getData<UInt>("crack_numbers", coh_element.type,
			coh_element.ghost_type)(coh_element.element);
			surface_subfacets_crack_nb[subfacet] = crack_nb;
			// add subfacet nodes to the set
			for (auto & subfacet_node : mesh_facets.getConnectivity(subfacet))
			surface_nodes.emplace(subfacet_node);
			}
			}
			}
			}

			// second loop on cohesives (includes duplicated facets)
			for (auto & type_cohesive :
			mesh.elementTypes(spatial_dimension, _not_ghost, _ek_cohesive)) {
			auto & filter = this->element_filter(type_cohesive, _not_ghost);
			if (filter.empty()) {
			continue;
			}

			for (auto & cohesive_nb : filter) {
			Element cohesive{type_cohesive, cohesive_nb, _not_ghost};
			auto && facets_to_cohesive = mesh_facets.getSubelementToElement(cohesive);
			for (auto coh_facet : facets_to_cohesive) {
			auto && subfacets_to_facet =
			mesh_facets.getSubelementToElement(coh_facet);
			for (auto & subfacet : subfacets_to_facet) {
			auto ret = visited_subfacets.emplace(subfacet);
			if (not ret.second)
			continue;

			std::set<Element> connected_cohesives;
			auto && facets_to_subfacet =
			mesh_facets.getElementToSubelement(subfacet);
			for (auto & facet : facets_to_subfacet) {
			auto & connected_to_facet =
			mesh_facets.getElementToSubelement(facet);
			for (auto & connected_el : connected_to_facet) {
			if (connected_el.type == _not_defined)
			goto nextfacet2;
			if (mesh.getKind(connected_el.type) == _ek_cohesive) {
			connected_cohesives.emplace(connected_el);
			}
			}
			nextfacet2:;
			}
			if (connected_cohesives.size() == 1) {
			contour_subfacets_coh_el[subfacet] = *connected_cohesives.begin();
			Vector<UInt> contour_subfacet_nodes =
			mesh_facets.getConnectivity(subfacet);
			for (auto & contour_subfacet_node : contour_subfacet_nodes) {
			contour_nodes.emplace(contour_subfacet_node);
			}
			} else if (connected_cohesives.size() > 1) {
			auto coh_element = *connected_cohesives.begin();
			UInt crack_nb =
			mesh.getData<UInt>("crack_numbers", coh_element.type,
			coh_element.ghost_type)(coh_element.element);
			surface_subfacets_crack_nb[subfacet] = crack_nb;
			// add subfacet nodes to the set
			for (auto & subfacet_node : mesh_facets.getConnectivity(subfacet))
			surface_nodes.emplace(subfacet_node);
			}
			}
			}
			}
			}

			// remove external nodes from the surface nodes list
			for (auto & contour_node : contour_nodes) {
			surface_nodes.erase(contour_node);
			}

			return std::make_tuple(contour_subfacets_coh_el, surface_subfacets_crack_nb,
			surface_nodes, contour_nodes);
			}
			/* ----------------------------------------------------------------- */
			template <UInt spatial_dimension>
			void MaterialCohesiveLinearSequential<spatial_dimension>::
			insertCohesiveElements(std::map<UInt, UInt> & facet_nbs_crack_nbs,
			ElementType type_facet, bool check_only) {
			if (not facet_nbs_crack_nbs.size()) {
			return;
			}

			CohesiveElementInserter & inserter = this->model->getElementInserter();
			ElementType type_cohesive = FEEngine::getCohesiveElementType(type_facet);
			auto & f_filter = this->facet_filter(type_facet);
			auto & f_insertion = inserter.getInsertionFacets(type_facet);
			auto & scal_tractions = scalar_tractions(type_facet);
			auto & norm_tractions = normal_tractions(type_facet);
			const auto & sigma_limits = this->sigma_c(type_facet);
			auto & sig_c_eff = this->sigma_c_eff(type_cohesive);
			auto & del_c = this->delta_c_eff(type_cohesive);
			auto & del_max = this->delta_max(type_cohesive);
			auto & ins_stress = this->insertion_stress(type_cohesive);
			auto & trac_old = this->tractions.previous(type_cohesive);
			const auto & normals = this->model->getFEEngine("FacetsFEEngine")
			.getNormalsOnIntegrationPoints(type_facet);
			auto normal_begin = normals.begin(spatial_dimension);

			UInt nb_quad_facet = this->model->getFEEngine("FacetsFEEngine")
			.getNbIntegrationPoints(type_facet);
			std::vector<Real> new_sigmas;
			std::vector<Vector<Real>> new_normal_traction;
			std::vector<Real> new_delta_c;
			std::vector<Real> new_delta_max;
			UInt nb_understressed{0};

			for (auto && pair : facet_nbs_crack_nbs) {
			auto & facet_nb = pair.first;
			// get facet's local id
			auto local_id = f_filter.find(facet_nb);
			AKANTU_DEBUG_ASSERT(local_id != UInt(-1),
			"mismatch between global and local facet numbering"
			<< facet_nb);

			// mark the insertion of the cohesive element
			f_insertion(facet_nb) = true;

			if (check_only)
			continue;

			auto & sigma_limit = sigma_limits(local_id);
			Vector<Real> stress_check =
			make_view(scal_tractions, nb_quad_facet).begin()[local_id];
			Matrix<Real> normal_traction =
			make_view(norm_tractions, spatial_dimension, nb_quad_facet)
			.begin()[local_id];

			// store the new cohesive material parameters for each quad point
			for (UInt q = 0; q < nb_quad_facet; ++q) {
			UInt current_quad = facet_nb * nb_quad_facet + q;
			Real new_sigma = stress_check(q);
			Real new_del_max{0};
			Vector<Real> normal_traction_vec(normal_traction(q));
			const Vector<Real> & normal = normal_begin[current_quad];

			// workaround to insert understressed cohesives
			if (new_sigma < sigma_limit) {
			new_sigma = sigma_limit;
			normal_traction_vec = normal * sigma_limit;
			nb_understressed++;
			}

			Real new_delta;
			// set delta_c in function of G_c or a given delta_c value
			if (Math::are_float_equal(this->delta_c, 0.))
			new_delta = 2 * this->G_c / new_sigma;
			else
			new_delta = sigma_limit / new_sigma * this->delta_c;

			// artifitial way to give initial stiffness to cohesive (SLA)
			new_del_max = new_delta / 100;

			if (spatial_dimension != 3)
			normal_traction_vec *= -1.;

			new_sigmas.push_back(new_sigma);
			new_normal_traction.push_back(normal_traction_vec);
			new_delta_max.push_back(new_del_max);
			new_delta_c.push_back(new_delta);
			}
			}

			// update material data for the new elements
			UInt old_nb_quad_points = sig_c_eff.size();
			UInt new_nb_quad_points = new_sigmas.size();
			sig_c_eff.resize(old_nb_quad_points + new_nb_quad_points);
			ins_stress.resize(old_nb_quad_points + new_nb_quad_points);
			trac_old.resize(old_nb_quad_points + new_nb_quad_points);
			del_c.resize(old_nb_quad_points + new_nb_quad_points);
			del_max.resize(old_nb_quad_points + new_nb_quad_points);

			for (UInt q = 0; q < new_nb_quad_points; ++q) {
			sig_c_eff(old_nb_quad_points + q) = new_sigmas[q];
			del_c(old_nb_quad_points + q) = new_delta_c[q];
			del_max(old_nb_quad_points + q) = new_delta_max[q];
			for (UInt dim = 0; dim < spatial_dimension; ++dim) {
			ins_stress(old_nb_quad_points + q, dim) = new_normal_traction[q](dim);
			trac_old(old_nb_quad_points + q, dim) = new_normal_traction[q](dim);
			}
			}

			// always update stiffness if new elements are added
			setUpdateStiffness(true);

			AKANTU_DEBUG_OUT();
			}

			INSTANTIATE_MATERIAL(cohesive_linear_sequential,
			MaterialCohesiveLinearSequential);

			} // namespace akantu

rAKA/src/model/multiscale_tools/materials/material_cohesive_linear_sequential.cc2d7ec870588efeatures/fe2-orthodamage

material_cohesive_linear_sequential.ccView Options

rAKA/src/model/multiscale_tools/materials/material_cohesive_linear_sequential.cc
2d7ec870588efeatures/fe2-orthodamage

material_cohesive_linear_sequential.cc
View Options