Homec4science
Diffusion akantu (features/fluid_diffusion) Browse

rAKA/doc/manual/manual-io.tex
c17ed228b8cafeatures/fluid_diffusion

Last Change
Raw File

manual-io.tex
View Options

\chapter{Input/Output}\index{I\/O}
\section{Generic data}
In this chapter, we address ways to get the internal data in human-readable formats.
The models in \akantu handle data associated to the
mesh, but this data can be split into several \code{Arrays}. For example, the
data stored per element type in a \code{ElementTypeMapArray} is composed of as
many \code{Array}s as types in the mesh.
In order to get this data in a visualization software, the models contain a
object to dump \code{VTK} files. These files can be visualized in software such
as \code{ParaView}\cite{paraview}, \code{ViSit}\cite{visit} or \code{Mayavi}\cite{mayavi}.
The internal dumper of the model can be configured to specify which data fields
are to be written. This is done with the
\code{addDumpField}\index{I\/O!addDumpField} method. By default all the files
are generated in a folder called \code{paraview/}
\begin{cpp}
model.setBaseName("output"); // prefix for all generated files
model.addDumpField("displacement");
model.addDumpField("stress");
...
model.dump()
\end{cpp}
The fields are dumped with the number of components of the memory. For example, in 2D, the memory has
\code{Vector}s of 2 components, or the $2^{nd}$ order tensors with $2\times2$ components.
This memory can be dealt with \code{addDumpFieldVector}\index{I\/O!addDumpFieldVector} which always dumps
\code{Vector}s with 3 components or \code{addDumpFieldTensor}\index{I\/O!addDumpFieldTensor} which dumps $2^{nd}$
order tensors with $3\times3$ components respectively. The routines \code{addDumpFieldVector}\index{I\/O!addDumpFieldVector} and
\code{addDumpFieldTensor}\index{I\/O!addDumpFieldTensor} were introduced because of \code{ParaView} which mostly manipulate 3D data.
Those fields which are stored by quadrature point are modified to be seen in the
\code{VTK} file as elemental data. To do this, the default is to average the
values of all the quadrature points.
The list of fields depends on the models (for
\code{SolidMechanicsModel} see table~\ref{tab:io:smm_field_list}).
\begin{table}
\centering
\begin{tabular}{llll}
\toprule
key & type & support \\
\midrule
displacement & Vector<Real> & nodes \\
mass & Vector<Real> & nodes \\
velocity & Vector<Real> & nodes \\
acceleration & Vector<Real> & nodes \\
force & Vector<Real> & nodes \\
residual & Vector<Real> & nodes \\
increment & Vector<Real> & nodes \\
{blocked\_dofs} & Vector<bool> & nodes \\
partitions & Real & elements \\
material\_index & variable & elements\\
strain & Matrix<Real> & quadrature points \\
Green strain & Matrix<Real> & quadrature points \\
principal strain & Vector<Real> & quadrature points \\
principal Green strain & Vector<Real> & quadrature points \\
grad\_u & Matrix<Real> & quadrature points \\
stress & Matrix<Real> & quadrature points \\
Von Mises stress & Real & quadrature points \\
material\_index & variable & quadrature points \\
\bottomrule
\end{tabular}
\caption{List of dumpable fields for \code{SolidMechanicsModel}.}
\label{tab:io:smm_field_list}
\end{table}
\section{Cohesive elements' data}
Cohesive elements and their relative data can be easily dumped thanks
to a specific dumper contained in
\code{SolidMechanicsModelCohesive}. In order to use it, one has just
to add the string \code{"cohesive elements"} when calling each method
already illustrated. Here is an example on how to dump displacement
and damage:
\begin{cpp}
model.setBaseNameToDumper("cohesive elements", "cohesive_elements_output");
model.addDumpFieldVectorToDumper("cohesive elements", "displacement");
model.addDumpFieldToDumper("cohesive elements", "damage");
...
model.dump("cohesive elements");
\end{cpp}
\subsection{Fragmentation data}
Whenever the \code{SolidMechanicsModelCohesive} is used, it is
possible to dump additional data about the fragments that get formed
in the simulation both in serial and parallel. This task is carried
out by the \code{FragmentManager} class, that takes care of computing
the following quantities for each fragment:
\begin{itemize}
\item index;
\item mass;
\item moments of inertia;
\item velocity;
\item number of elements.
\end{itemize}
These computations can be realized at once by calling the function
\code{computeAllData}, or individually by calling the other public
functions of the class. The data can be dumped to be visualized in
Paraview, or can be accessed within the simulation. An example of
usage is:
\begin{cpp}
FragmentManager fragment_manager(model);
fragment_manager.buildAllData();
...
model.addDumpField("fragments"); // this field contains the indices
model.addDumpField("fragments mass");
model.addDumpField("moments of inertia");
model.addDumpField("elements per fragment");
...
for (UInt step = 1; step <= total_steps; ++step) {
...
fragment_manager.buildAllData();
model.dump();
}
...
const Array<Real> & fragment_velocities = fragment_manager.getVelocity();
...
\end{cpp}
At the end of this example the velocities of the fragments are
accessed with a reference to a \code{const Array<Real>}. The size of
this array is the number of fragments, and its number of components is
the spatial dimension in this case.
\section{Advanced dumping}
\subsection{Arbitrary fields}
In addition to the predetermined fields from the models and materials, the user
can add any data to a dumper as long as the support is the same. That is to say
data that have the size of the full mesh on if the dumper is dumping the mesh,
or of the size of an element group if it is a filtered dumper.
For this the easiest is to use the ``external'' fields register functions\index{I\/O!addDumpFieldExternal}
The simple case force nodal and elemental data are to pass directly the data
container itself if it as the good size.
\begin{itemize}
\item For nodal fields :
\begin{cpp}
Array<T> nodal_data(nb_nodes, nb_component);
...
model.addDumpFieldExternal("my_field", nodal_data);
\end{cpp}
\item For elemental fields :
\begin{cpp}
ElementTypeMapArray<T> elem_data;
...
model.addDumpFieldExternal("my_field", elem_data);
\end{cpp}
\end{itemize}
If some changes have to be applied on the data as for example a padding for
\code{ParaView} vectors, this can be done by using the
field interface.
\begin{cpp}
model.addDumpFieldExternal(const std::string & field_name,
dumper::Field * field);
\end{cpp}
An example of code presenting this interface is present in the
\shellcode{\examplesdir/io/dumper}. This interface is part of the
\code{Dumpable} class from which the \code{Mesh} inherits.
\subsection{Creating a new dumper}
You can also create you own dumpers, \akantu uses a third-party library in order
to write the output files, \code{IOHelper}. \akantu supports the \code{ParaView}
format and a Text format defined by \code{IOHelper}.
This two files format are handled by the classes
\code{DumperParaview}\index{I\/O!DumperParaview} and
\code{DumperText}\index{I\/O!DumperText}.
In order to use them you can instantiate on of this object in your code. This
dumper have a simple interface. You can register a mesh
\code{registerMesh}\index{I\/O!registerMesh},
\code{registerFilteredMesh}\index{I\/O!registerFilteredMesh} or a field,
\code{registerField}\index{I\/O!registerField}.
An example of code presenting this low level interface is present in the
\shellcode{\examplesdir/io/dumper}. The different types of \code{Field} that can
be created are present in the source folder \shellcode{src/io/dumper}.
%%% Local Variables:
%%% mode: latex
%%% TeX-master: "manual"
%%% End:
c4science · Help