Diffusion CADD_mesher (dev/incorporate-qhull) Browse

incorporate-qhull

qh-optq.htm
View Options

This document is not UTF8. It was detected as Shift JIS and converted to UTF8 for display.

			<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML//EN">
			<html>

			<head>
			<title>Qhull control options (Q)</title>
			</head>

			<body>
			<!-- Navigation links -->
			<p><b>Up:</b> <a href="http://www.geom.umn.edu/software/qhull">Home page</a> for Qhull<br>
			<b>Up:</b> <a href="index.htm#TOC">Qhull manual</a>: Table of Contents<br>
			<b>To:</b> <a href="qh-quick.htm#programs">Programs</a>
			<a href="qh-quick.htm#options">Options</a>
			<a href="qh-opto.htm#output">Output</a>
			<a href="qh-optf.htm#format">Formats</a>
			<a href="qh-optg.htm#geomview">Geomview</a>
			<a href="qh-optp.htm#print">Print</a>
			<a href="qh-optq.htm#qhull">Qhull</a>
			<a href="qh-optc.htm#prec">Precision</a>
			<a href="qh-optt.htm#trace">Trace</a></p>

			<hr>
			<!-- Main text of document -->
			<h1><a
			href="http://www.geom.umn.edu/graphics/pix/Special_Topics/Computational_Geometry/delaunay.html"><img
			src="qh--dt.gif" alt="[delaunay]" align="middle" width="100"
			height="100"></a> Qhull control options (Q)</h1>

			<p>This section lists the control options for Qhull. These
			options are indicated by 'Q' followed by a letter. </p>

			<p><b>Copyright © 1995-2002 The Geometry Center, Minneapolis MN</b></p>

			<hr>

			<p><a href="index.htm#TOC">ｻ</a> <a href="qh-quick.htm#programs">Programs</a>
			<a name="qhull"></a> <a href="qh-quick.htm#options">Options</a>
			<a href="qh-opto.htm#output">Output</a>
			<a href="qh-optf.htm#format">Formats</a>
			<a href="qh-optg.htm#geomview">Geomview</a>
			<a href="qh-optp.htm#print">Print</a>
			<a href="qh-optq.htm#qhull">Qhull</a>
			<a href="qh-optc.htm#prec">Precision</a>
			<a href="qh-optt.htm#trace">Trace</a></p>

			<h2>Qhull control options</h2>

			<dl compact>
			<dt> </dt>
			<dd><b>General</b></dd>
			<dt><a href="#Qu">Qu</a></dt>
			<dd>compute upper hull for furthest-site Delaunay
			triangulation </dd>
			<dt><a href="#Qc">Qc</a></dt>
			<dd>keep coplanar points with nearest facet</dd>
			<dt><a href="#Qi">Qi</a></dt>
			<dd>keep interior points with nearest facet</dd>
			<dt><a href="#QJn">QJ</a></dt>
			<dd>joggled input to avoid precision problems</dd>
			<dt><a href="#Qt">Qt</a></dt>
			<dd>triangulated output</dd>
			<dt> </dt>
			<dt> </dt>
			<dd><b>Precision handling</b></dd>
			<dt><a href="#Qz">Qz</a></dt>
			<dd>add a point-at-infinity for Delaunay triangulations</dd>
			<dt><a href="#Qx">Qx</a></dt>
			<dd>exact pre-merges (allows coplanar facets)</dd>
			<dt><a href="#Qs">Qs</a></dt>
			<dd>search all points for the initial simplex</dd>
			<dt><a href="#Qbb">Qbb</a></dt>
			<dd>scale last coordinate to [0,m] for Delaunay</dd>
			<dt><a href="#Qv">Qv</a></dt>
			<dd>test vertex neighbors for convexity</dd>
			<dt> </dt>
			<dt> </dt>
			<dd><b>Transform input</b></dd>
			<dt><a href="#Qb0">Qbk:0Bk:0</a></dt>
			<dd>drop dimension k from input</dd>
			<dt><a href="#QRn">QRn</a></dt>
			<dd>random rotation (n=seed, n=0 time, n=-1 time/no rotate)</dd>
			<dt><a href="#Qbk">Qbk:n</a></dt>
			<dd>scale coord[k] to low bound of n (default -0.5)</dd>
			<dt><a href="#QBk">QBk:n</a></dt>
			<dd>scale coord[k] to upper bound of n (default 0.5)</dd>
			<dt><a href="#QbB">QbB</a></dt>
			<dd>scale input to fit the unit cube</dd>
			<dt> </dt>
			<dt> </dt>
			<dd><b>Select facets</b></dd>
			<dt><a href="#QVn">QVn</a></dt>
			<dd>good facet if it includes point n, -n if not</dd>
			<dt><a href="#QGn">QGn</a></dt>
			<dd>good facet if visible from point n, -n for not visible</dd>
			<dt><a href="#Qg">Qg</a></dt>
			<dd>only build good facets (needs '<a href="#QGn">QGn</a>', '<a
			href="#QVn">QVn </a>', or '<a href="qh-optp.htm#Pdk">Pdk</a>')</dd>
			<dt> </dt>
			<dt> </dt>
			<dd><b>Experimental</b></dd>
			<dt><a href="#Q4">Q4</a></dt>
			<dd>avoid merging old facets into new facets</dd>
			<dt><a href="#Q5">Q5</a></dt>
			<dd>do not correct outer planes at end of qhull</dd>
			<dt><a href="#Q3">Q3</a></dt>
			<dd>do not merge redundant vertices</dd>
			<dt><a href="#Q6">Q6</a></dt>
			<dd>do not pre-merge concave or coplanar facets</dd>
			<dt><a href="#Q0">Q0</a></dt>
			<dd>do not pre-merge facets with 'C-0' or 'Qx'</dd>
			<dt><a href="#Q8">Q8</a></dt>
			<dd>ignore near-interior points</dd>
			<dt><a href="#Q2">Q2</a></dt>
			<dd>merge all non-convex at once instead of independent sets</dd>
			<dt><a href="#Qf">Qf</a></dt>
			<dd>partition point to furthest outside facet</dd>
			<dt><a href="#Q7">Q7</a></dt>
			<dd>process facets depth-first instead of breadth-first</dd>
			<dt><a href="#Q9">Q9</a></dt>
			<dd>process furthest of furthest points</dd>
			<dt><a href="#Q10">Q10</a></dt>
			<dd>no special processing for narrow distributions</dd>
			<dt><a href="#Q11">Q11</a></dt>
			<dd>copy normals and recompute centrums for tricoplanar facets</dd>
			<dt><a href="#Qm">Qm</a></dt>
			<dd>process points only if they would increase the max. outer
			plane </dd>
			<dt><a href="#Qr">Qr</a></dt>
			<dd>process random outside points instead of furthest one</dd>
			<dt><a href="#Q1">Q1</a></dt>
			<dd>sort merges by type instead of angle</dd>
			</dl>

			<hr>

			<h3><a href="#qhull">ｻ</a><a name="Qbb">Qbb - scale the last
			coordinate to [0,m] for Delaunay</a></h3>

			<p>After scaling with option 'Qbb', the lower bound of the last
			coordinate will be 0 and the upper bound will be the maximum
			width of the other coordinates. Scaling happens after projecting
			the points to a paraboloid and scaling other coordinates. </p>

			<p>Option 'Qbb' is automatically set for <a href=qdelaun.htm>qdelaunay</a>
			and <a href=qvoronoi.htm>qvoronoi</a>. Option 'Qbb' is automatically set for joggled input '<a
			href="qh-optq.htm#QJn">QJ</a>'. </p>

			<p>Option 'Qbb' should be used for Delaunay triangulations with
			integer coordinates. Since the last coordinate is the sum of
			squares, it may be much larger than the other coordinates. For
			example, <tt>rbox 10000 D2 B1e8 \| qhull d</tt> has precision
			problems while <tt>rbox 10000 D2 B1e8 \| qhull d Qbb</tt> is OK. </p>

			<h3><a href="#qhull">ｻ</a><a name="QbB">QbB - scale the input to
			fit the unit cube</a></h3>

			<p>After scaling with option 'QbB', the lower bound will be -0.5
			and the upper bound +0.5 in all dimensions. For different bounds
			change qh_DEFAULTbox in <tt>user.h</tt> (0.5 is best for <a
			href="index.htm#geomview">Geomview</a>).</p>

			<p>For Delaunay and Voronoi diagrams, scaling happens after
			projection to the paraboloid. Under precise arithmetic, scaling
			does not change the topology of the convex hull. Scaling may
			reduce precision errors if coordinate values vary widely.</p>

			<h3><a href="#qhull">ｻ</a><a name="Qbk">Qbk:n - scale coord[k]
			to low bound</a></h3>

			<p>After scaling, the lower bound for dimension k of the input
			points will be n. 'Qbk' scales coord[k] to -0.5. </p>

			<h3><a href="#qhull">ｻ</a><a name="QBk">QBk:n - scale coord[k]
			to upper bound </a></h3>

			<p>After scaling, the upper bound for dimension k of the input
			points will be n. 'QBk' scales coord[k] to 0.5. </p>

			<h3><a href="#qhull">ｻ</a><a name="Qb0">Qbk:0Bk:0 - drop
			dimension k from the input points</a></h3>

			<p>Drop dimension<em> k </em>from the input points. For example,
			'Qb1:0B1:0' deletes the y-coordinate from all input points. This
			allows the user to take convex hulls of sub-dimensional objects.
			It happens before the Delaunay and Voronoi transformation.
			It happens after the halfspace transformation for both the data
			and the feasible point.</p>

			<h3><a href="#qhull">ｻ</a><a name="Qc">Qc - keep coplanar points
			with nearest facet </a></h3>

			<p>During construction of the hull, a point is coplanar if it is
			between '<a href="qh-optc.htm#Wn">Wn</a>' above and '<a
			href="qh-optc.htm#Un">Un</a>' below a facet's hyperplane. A
			different definition is used for output from Qhull. </p>

			<p>For output, a coplanar point is above the minimum vertex
			(i.e., above the inner plane). With joggle ('<a
			href="qh-optq.htm#QJn">QJ</a>'), a coplanar point includes points
			within one joggle of the inner plane. </p>

			<p>With option 'Qc', output formats '<a href="qh-opto.htm#p">p </a>',
			'<a href="qh-opto.htm#f">f</a>', '<a href="qh-optg.htm#Gp">Gp</a>',
			'<a href="qh-optf.htm#Fc">Fc</a>', '<a href="qh-optf.htm#FN">FN</a>',
			and '<a href="qh-optf.htm#FP">FP</a>' will print the coplanar
			points. With options 'Qc <a href="#Qi">Qi</a>' these outputs
			include the interior points.</p>

			<p>For Delaunay triangulations (<a href=qdelaun.htm>qdelaunay</a>
			or <a href=qvoronoi.htm>qvoronoi</a>), a coplanar point is a point
			that is nearly incident to a vertex. All input points are either
			vertices of the triangulation or coplanar.</p>

			<p>Qhull stores coplanar points with a facet. While constructing
			the hull, it retains all points within qh_RATIOnearInside
			(user.h) of a facet. In qh_check_maxout(), it uses these points
			to determine the outer plane for each facet. With option 'Qc',
			qh_check_maxout() retains points above the minimum vertex for the
			hull. Other points are removed. If qh_RATIOnearInside is wrong or
			if options '<a href="#Q5">Q5</a> <a href="#Q8">Q8</a>' are set, a
			coplanar point may be missed in the output (see <a
			href="qh-impre.htm#limit">Qhull limitations</a>).</p>

			<h3><a href="#qhull">ｻ</a><a name="Qf">Qf - partition point to
			furthest outside facet </a></h3>

			<p>After adding a new point to the convex hull, Qhull partitions
			the outside points and coplanar points of the old, visible
			facets. Without the '<a href="qh-opto.htm#f">f </a>' option and
			merging, it assigns a point to the first facet that it is outside
			('<a href="qh-optc.htm#Wn">Wn</a>'). When merging, it assigns a
			point to the first facet that is more than several times outside
			(see qh_DISToutside in user.h).</p>

			<p>If option 'Qf' is selected, Qhull performs a directed search
			(no merging) or an exhaustive search (merging) of new facets.
			Option 'Qf' may reduce precision errors if pre-merging does not
			occur.</p>

			<p>Option '<a href="#Q9">Q9</a>' processes the furthest of all
			furthest points.</p>

			<h3><a href="#qhull">ｻ</a><a name="Qg">Qg - only build good
			facets (needs 'QGn' 'QVn' or 'Pdk') </a></h3>

			<p>Qhull has several options for defining and printing good
			facets. With the '<a href="#Qg">Qg</a>' option, Qhull will only
			build those facets that it needs to determine the good facets in
			the output. This may speed up Qhull in 2-d and 3-d. It is
			useful for furthest-site Delaunay
			triangulations (<a href=qdelau_f.htm>qdelaunay Qu</a>,
			invoke with 'qhull d <a href="#Qu">Qu</a> Qg').
			It is not effective in higher
			dimensions because many facets see a given point and contain a
			given vertex. It is not guaranteed to work for all combinations.</p>

			<p>See '<a href="#QGn">QGn</a>', '<a href="#QVn">QVn</a>', and '<a
			href="qh-optp.htm#Pdk">Pdk</a>' for defining good facets, and '<a
			href="qh-optp.htm#Pg">Pg</a>' and '<a href="qh-optp.htm#PG">PG</a>'
			for printing good facets and their neighbors. If pre-merging ('<a
			href="qh-optc.htm#Cn">C-n</a>') is not used and there are
			coplanar facets, then 'Qg Pg' may produce a different result than
			'<a href="qh-optp.htm#Pg">Pg</a>'. </p>

			<h3><a href="#qhull">ｻ</a><a name="QGn">QGn - good facet if
			visible from point n, -n for not visible </a></h3>

			<p>With option 'QGn', a facet is good (see '<a href="#Qg">Qg</a>'
			and '<a href="qh-optp.htm#Pg">Pg</a>') if it is visible from
			point n. If <i>n < 0</i>, a facet is good if it is not visible
			from point n. Point n is not added to the hull (unless '<a
			href="qh-optt.htm#TCn">TCn</a>' or '<a href="qh-optt.htm#TPn">TPn</a>').</p>

			<p>With <a href="rbox.htm">rbox</a>, use the 'Pn,m,r' option
			to define your point; it will be point 0 ('QG0'). </p>

			<h3><a href="#qhull">ｻ</a><a name="Qi">Qi - keep interior points
			with nearest facet </a></h3>

			<p>Normally Qhull ignores points that are clearly interior to the
			convex hull. With option 'Qi', Qhull treats interior points the
			same as coplanar points. Option 'Qi' does not retain coplanar
			points. You will probably want '<a href="#Qc">Qc </a>' as well. </p>

			<p>Option 'Qi' is automatically set for '<a href=qdelaun.htm>qdelaunay</a>
			<a href="#Qc">Qc</a>' and '<a href=qvoronoi.htm>qvoronoi</a>
			<a href="#Qc">Qc</a>'. If you use
			'<a href=qdelaun.htm>qdelaunay</a> Qi' or '<a href=qvoronoi.htm>qvoronoi</a>
			Qi', option '<a href="qh-opto.htm#s">s</a>' reports all nearly
			incident points while option '<a href="qh-optf.htm#Fs">Fs</a>'
			reports the number of interior points (should always be zero).</p>

			<p>With option 'Qi', output formats '<a href="qh-opto.htm#p">p</a>',
			'<a href="qh-opto.htm#f">f</a>','<a href="qh-optg.htm#Gp">Gp</a>',
			'<a href="qh-optf.htm#Fc">Fc</a>', '<a href="qh-optf.htm#FN">FN</a>',
			and '<a href="qh-optf.htm#FP">FP</a>' include interior points. </p>

			<h3><a href="#qhull">ｻ</a><a name="QJ">QJ</a> or <a name="QJn">QJn</a> - joggled
			input to avoid precision errors</a></h3>

			<p>Option 'QJ' or 'QJn' joggles each input coordinate by adding a
			random number in the range [-n,n]. If a precision error occurs,
			It tries again. If precision errors still occur, Qhull increases <i>n</i>
			ten-fold and tries again. The maximum value for increasing <i>n</i>
			is 0.01 times the maximum width of the input. Option 'QJ' selects
			a default value for <i>n</i>. <a href="../src/user.h#JOGGLEdefault">User.h</a>
			defines these parameters and a maximum number of retries. See <a
			href="qh-impre.htm#joggle">Joggled input or merged facets</a>. </p>

			<p>Option 'QJ' also sets '<a href="qh-optq.htm#Qbb">Qbb</a>' for
			Delaunay triangulations and Voronoi diagrams. It does not set
			'Qbb' if '<a href="qh-optq.htm#Qbk">Qbk:n</a>' or '<a
			href="qh-optq.htm#QBk">QBk:n</a>' are set. </p>

			<p>If 'QJn' is set, Qhull does not merge facets unless requested
			to. All facets are simplicial (triangular in 2-d). This may be
			important for your application. You may also use triangulated output
			('<a href="qh-optq.htm#Qt">Qt</a>') or Option '<a href="qh-optf.htm#Ft">Ft</a>'.

			<p>Qhull adjusts the outer and inner planes for 'QJn' ('<a
			href="qh-optf.htm#Fs">Fs</a>'). They are increased by <i>sqrt(d)*n</i>
			to account for the maximum distance between a joggled point and
			the corresponding input point. Coplanar points ('<a
			href="qh-optq.htm#Qc">Qc</a>') require an additional <i>sqrt(d)*n</i>
			since vertices and coplanar points may be joggled in opposite
			directions. </p>

			<p>For Delaunay triangulations (<a href=qdelaun.htm>qdelaunay</a>)
			and Voronoi diagrams (<a href=qvoronoi.htm>qvoronoi</a>), joggle
			happens before lifting the input sites to a paraboloid. Instead of
			'QJ', you may use triangulated output ('<a
			href="qh-optq.htm#Qt">Qt</a>')</p>

			<p>By default, 'QJn' uses a fixed random number seed. To use time
			as the random number seed, select '<a href="qh-optq.htm#QRn">QR-1</a>'.
			The summary ('<a href="qh-opto.htm#s">s</a>') will show the
			selected seed as 'QR-n'.

			<p>With 'QJn', Qhull does not error on degenerate hyperplane
			computations. Except for Delaunay and Voronoi computations, Qhull
			does not error on coplanar points. </p>

			<p>Use option '<a href="qh-optf.htm#FO">FO</a>' to display the
			selected options. Option 'FO' displays the joggle and the joggle
			seed. If Qhull restarts, it will redisplay the options. </p>

			<p>Use option '<a href="qh-optt.htm#TRn">TRn</a>' to estimate the
			probability that Qhull will fail for a given 'QJn'.

			<h3><a href="#qhull">ｻ</a><a name="Qm">Qm - only process points
			that increase the maximum outer plane </a></h3>

			<p>Qhull reports the maximum outer plane in its summary ('<a
			href="qh-opto.htm#s">s</a>'). With option 'Qm', Qhull does not
			process points that are below the current, maximum outer plane.
			This is equivalent to always adjusting '<a href="qh-optc.htm#Wn">Wn
			</a>' to the maximum distance of a coplanar point to a facet. It
			is ignored for points above the upper convex hull of a Delaunay
			triangulation. Option 'Qm' is no longer important for merging.</p>

			<h3><a href="#qhull">ｻ</a><a name="Qr">Qr - process random
			outside points instead of furthest ones </a></h3>

			<p>Normally, Qhull processes the furthest point of a facet's
			outside points. Option 'Qr' instead selects a random outside
			point for processing. This makes Qhull equivalent to the
			randomized incremental algorithms.</p>

			<p>The original randomization algorithm by Clarkson and Shor [<a
			href="index.htm#cla-sho89">'89</a>] used a conflict list which
			is equivalent to Qhull's outside set. Later randomized algorithms
			retained the previously constructed facets. </p>

			<p>To compare Qhull to the randomized algorithms with option
			'Qr', compare "hyperplanes constructed" and
			"distance tests". Qhull does not report CPU time
			because the randomization is inefficient. </p>

			<h3><a href="#qhull">ｻ</a><a name="QRn">QRn - random rotation </a></h3>

			<p>Option 'QRn' randomly rotates the input. For Delaunay
			triangulations (<a href=qdelaun.htm>qdelaunay</a> or <a href=qvoronoi.htm>qvoronoi</a>),
			it rotates the lifted points about
			the last axis. </p>

			<p>If <em>n=0</em>, use time as the random number seed. If <em>n>0</em>,
			use n as the random number seed. If <em>n=-1</em>, don't rotate
			but use time as the random number seed. If <em>n<-1</em>,
			don't rotate but use <em>n</em> as the random number seed. </p>

			<h3><a href="#qhull">ｻ</a><a name="Qs">Qs - search all points
			for the initial simplex </a></h3>

			<p>Qhull constructs an initial simplex from <i>d+1</i> points. It
			selects points with the maximum and minimum coordinates and
			non-zero determinants. If this fails, it searches all other
			points. In 8-d and higher, Qhull selects points with the minimum
			x or maximum coordinate (see qh_initialvertices in <tt>poly2.c </tt>).
			It rejects points with nearly zero determinants. This should work
			for almost all input sets.</p>

			<p>If Qhull can not construct an initial simplex, it reports a
			descriptive message. Usually, the point set is degenerate and one
			or more dimensions should be removed ('<a href="#Qb0">Qbk:0Bk:0</a>').
			If not, use option 'Qs'. It performs an exhaustive search for the
			best initial simplex. This is expensive is high dimensions. </p>

			<h3><a href="#qhull">ｻ</a><a name="Qt">Qt - triangulated output</a></h3>

			<p>By default, qhull merges facets to handle precision errors. This
			produces non-simplicial facets (e.g., the convex hull of a cube has 6 square
			facets). Each facet is non-simplicial because it has four vertices.

			<p>Use option 'Qt' to triangulate all non-simplicial facets before generating
			results. Alternatively, use joggled input ('<a href="#QJn">QJ</a>') to
			prevent non-simplical facets. Unless '<a href="qh-optp.htm#Pp">Pp</a>' is set,
			qhull produces a warning if 'QJ' and 'Qt' are used together.

			<p>Option 'Qt' may produce degenerate facets with zero area.</p>

			<p>Facet area and hull volumes may differ with and without
			'Qt'. The triangulations are different and different triangles
			may be ignored due to precision errors.

			<p>With sufficient merging, the ridges of a non-simplicial facet may share more than two neighboring facets. If so, their triangulation ('<a href="#Qt">Qt</a>') will fail since two facets have the same vertex set. </p>

			<h3><a href="#qhull">ｻ</a><a name="Qu">Qu - compute upper hull
			for furthest-site Delaunay triangulation </a></h3>

			<p>When computing a Delaunay triangulation (<a href=qdelaun.htm>qdelaunay</a>
			or <a href=qvoronoi.htm>qvoronoi</a>),
			Qhull computes both the the convex hull of points on a
			paraboloid. It normally prints facets of the lower hull. These
			correspond to the Delaunay triangulation. With option 'Qu', Qhull
			prints facets of the upper hull. These correspond to the <a
			href="qdelau_f.htm">furthest-site Delaunay triangulation</a>
			and the <a href="qvoron_f.htm">furthest-site Voronoi diagram</a>.</p>

			<p>Option 'qhull d Qu <a href="#Qg">Qg</a>' may improve the speed of option
			'Qu'. If you use the Qhull library, a faster method is 1) use
			Qhull to compute the convex hull of the input sites; 2) take the
			extreme points (vertices) of the convex hull; 3) add one interior
			point (e.g.,
			'<a href="qh-optf.htm#FV">FV</a>', the average of <em>d</em> extreme points); 4) run
			'qhull d Qu' or 'qhull v Qu' on these points.</p>

			<h3><a href="#qhull">ｻ</a><a name="Qv">Qv - test vertex
			neighbors for convexity </a></h3>

			<p>Normally, Qhull tests all facet neighbors for convexity.
			Non-neighboring facets which share a vertex may not satisfy the
			convexity constraint. This occurs when a facet undercuts the
			centrum of another facet. They should still be convex. Option
			'Qv' extends Qhull's convexity testing to all neighboring facets
			of each vertex. The extra testing occurs after the hull is
			constructed.. </p>

			<h3><a href="#qhull">ｻ</a><a name="QVn">QVn - good facet if it
			includes point n, -n if not </a></h3>

			<p>With option 'QVn', a facet is good ('<a href="#Qg">Qg</a>',
			'<a href="qh-optp.htm#Pg">Pg</a>') if one of its vertices is
			point n. If <i>n<0</i>, a good facet does not include point n.

			<p>If options '<a href="qh-optp.htm#PG">PG</a>'
			and '<a href="#Qg">Qg</a>' are not set, option '<a href="qh-optp.htm#Pg">Pg</a>'
			(print only good)
			is automatically set.
			</p>

			<p>Option 'QVn' behaves oddly with options '<a href="qh-optf.htm#Fx">Fx</a>'
			and '<a href=qvoronoi.htm>qvoronoi</a> <a href="qh-optf.htm#Fv2">Fv</a>'.

			<p>If used with option '<a href="#Qg">Qg</a>' (only process good facets), point n is
			either in the initial simplex or it is the first
			point added to the hull. Options 'QVn Qg' require either '<a href="#QJn">QJ</a>' or
			'<a href="#Q0">Q0</a>' (no merging).</p>

			<h3><a href="#qhull">ｻ</a><a name="Qx">Qx - exact pre-merges
			(allows coplanar facets) </a></h3>

			<p>Option 'Qx' performs exact merges while building the hull.
			Option 'Qx' is set by default in 5-d and higher. Use option '<a
			href="#Q0">Q0</a>' to not use 'Qx' by default. Unless otherwise
			specified, option 'Qx' sets option '<a href="qh-optc.htm#C0">C-0</a>'.
			</p>

			<p>The "exact" merges are merging a point into a
			coplanar facet (defined by '<a href="qh-optc.htm#Vn">Vn </a>', '<a
			href="qh-optc.htm#Un">Un</a>', and '<a href="qh-optc.htm#Cn">C-n</a>'),
			merging concave facets, merging duplicate ridges, and merging
			flipped facets. Coplanar merges and angle coplanar merges ('<a
			href="qh-optc.htm#An">A-n</a>') are not performed. Concavity
			testing is delayed until a merge occurs.</p>

			<p>After the hull is built, all coplanar merges are performed
			(defined by '<a href="qh-optc.htm#Cn">C-n</a>' and '<a
			href="qh-optc.htm#An">A-n</a>'), then post-merges are performed
			(defined by '<a href="qh-optc.htm#Cn2">Cn</a>' and '<a
			href="qh-optc.htm#An2">An</a>'). If facet progress is logged ('<a
			href="qh-optt.htm#TFn">TFn</a>'), Qhull reports each phase and
			prints intermediate summaries and statistics ('<a
			href="qh-optt.htm#Ts">Ts</a>'). </p>

			<p>Without 'Qx' in 5-d and higher, options '<a
			href="qh-optc.htm#Cn">C-n</a>' and '<a href="qh-optc.htm#An">A-n</a>'
			may merge too many facets. Since redundant vertices are not
			removed effectively, facets become increasingly wide. </p>

			<p>Option 'Qx' may report a wide facet. With 'Qx', coplanar
			facets are not merged. This can produce a "dent" in an
			intermediate hull. If a point is partitioned into a dent and it
			is below the surrounding facets but above other facets, one or
			more wide facets will occur. In practice, this is unlikely. To
			observe this effect, run Qhull with option '<a href="#Q6">Q6</a>'
			which doesn't pre-merge concave facets. A concave facet makes a
			large dent in the intermediate hull.</p>

			<p>Option 'Qx' may set an outer plane below one of the input
			points. A coplanar point may be assigned to the wrong facet
			because of a "dent" in an intermediate hull. After
			constructing the hull, Qhull double checks all outer planes with
			qh_check_maxout in <tt>poly2.c </tt>. If a coplanar point is
			assigned to the wrong facet, qh_check_maxout may reach a local
			maximum instead of locating all coplanar facets. This appears to
			be unlikely.</p>

			<h3><a href="#qhull">ｻ</a><a name="Qz">Qz - add a
			point-at-infinity for Delaunay triangulations</a></h3>

			<p>Option 'Qz' adds a point above the paraboloid of lifted sites
			for a Delaunay triangulation. It allows the Delaunay
			triangulation of cospherical sites. It reduces precision errors
			for nearly cospherical sites.</p>

			<h3><a href="#qhull">ｻ</a><a name="Q0">Q0 - no merging with C-0
			and Qx</a></h3>

			<p>Turn off default merge options '<a href="qh-optc.htm#C0">C-0</a>'
			and '<a href="#Qx">Qx</a>'. </p>

			<p>With 'Q0' and without other pre-merge options, Qhull ignores
			precision issues while constructing the convex hull. This may
			lead to precision errors. If so, a descriptive warning is
			generated. See <a href="qh-impre.htm">Precision issues</a>.</p>

			<h3><a href="#qhull">ｻ</a><a name="Q1">Q1 - sort merges by type
			instead of angle </a></h3>

			<p>Qhull sorts the coplanar facets before picking a subset of the
			facets to merge. It merges concave and flipped facets first. Then
			it merges facets that meet at a steep angle. With 'Q1', Qhull
			sorts merges by type (coplanar, angle coplanar, concave) instead
			of by angle. This may make the facets wider. </p>

			<h3><a href="#qhull">ｻ</a><a name="Q2">Q2 - merge all non-convex
			at once instead of independent sets </a></h3>

			<p>With 'Q2', Qhull merges all facets at once instead of
			performing merges in independent sets. This may make the facets
			wider. </p>

			<h3><a href="#qhull">ｻ</a><a name="Q3">Q3 - do not merge
			redundant vertices </a></h3>

			<p>With 'Q3', Qhull does not remove redundant vertices. In 6-d
			and higher, Qhull never removes redundant vertices (since
			vertices are highly interconnected). Option 'Q3' may be faster,
			but it may result in wider facets. Its effect is easiest to see
			in 3-d and 4-d.</p>

			<h3><a href="#qhull">ｻ</a><a name="Q4">Q4 - avoid merging </a>old
			facets into new facets</h3>

			<p>With 'Q4', Qhull avoids merges of an old facet into a new
			facet. This sometimes improves facet width and sometimes makes it
			worse. </p>

			<h3><a href="#qhull">ｻ</a><a name="Q5">Q5 - do not correct outer
			planes at end of qhull </a></h3>

			<p>When merging facets or approximating a hull, Qhull tests
			coplanar points and outer planes after constructing the hull. It
			does this by performing a directed search (qh_findbest in <tt>geom.c</tt>).
			It includes points that are just inside the hull. </p>

			<p>With options 'Q5' or '<a href="qh-optp.htm#Po">Po</a>', Qhull
			does not test outer planes. The maximum outer plane is used
			instead. Coplanar points ('<a href="#Qc">Qc</a>') are defined by
			'<a href="qh-optc.htm#Un">Un</a>'. An input point may be outside
			of the maximum outer plane (this appears to be unlikely). An
			interior point may be above '<a href="qh-optc.htm#Un">Un</a>'
			from a hyperplane.</p>

			<p>Option 'Q5' may be used if outer planes are not needed. Outer
			planes are needed for options '<a href="qh-opto.htm#s">s</a>', '<a
			href="qh-optg.htm#G">G</a>', '<a href="qh-optg.htm#Go">Go </a>',
			'<a href="qh-optf.htm#Fs">Fs</a>', '<a href="qh-optf.htm#Fo">Fo</a>',
			'<a href="qh-optf.htm#FF">FF</a>', and '<a href="qh-opto.htm#f">f</a>'.</p>

			<h3><a href="#qhull">ｻ</a><a name="Q6">Q6 - do not pre-merge
			concave or coplanar facets </a></h3>

			<p>With 'Q6', Qhull does not pre-merge concave or coplanar
			facets. This demonstrates the effect of "dents" when
			using '<a href="#Qx">Qx</a>'. </p>

			<h3><a href="#qhull">ｻ</a><a name="Q7">Q7 - depth-first
			processing instead of breadth-first </a></h3>

			<p>With 'Q7', Qhull processes facets in depth-first order instead
			of breadth-first order. This may increase the locality of
			reference in low dimensions. If so, Qhull may be able to use
			virtual memory effectively. </p>

			<p>In 5-d and higher, many facets are visible from each
			unprocessed point. So each iteration may access a large
			proportion of allocated memory. This makes virtual memory
			ineffectual. Once real memory is used up, Qhull will spend most
			of its time waiting for I/O.</p>

			<p>Under 'Q7', Qhull runs slower and the facets may be wider. </p>

			<h3><a href="#qhull">ｻ</a><a name="Q8">Q8 - ignore near-interior
			points </a></h3>

			<p>With 'Q8' and merging, Qhull does not process interior points
			that are near to a facet (as defined by qh_RATIOnearInside in
			user.h). This avoids partitioning steps. It may miss a coplanar
			point when adjusting outer hulls in qh_check_maxout(). The best
			value for qh_RATIOnearInside is not known. Options 'Q8 <a
			href="#Qc">Qc</a>' may be sufficient. </p>

			<h3><a href="#qhull">ｻ</a><a name="Q9">Q9 - process furthest of
			furthest points </a></h3>

			<p>With 'Q9', Qhull processes the furthest point of all outside
			sets. This may reduce precision problems. The furthest point of
			all outside sets is not necessarily the furthest point from the
			convex hull.</p>

			<h3><a href="#qhull">ｻ</a><a name="Q10">Q10 - no special processing
			for narrow distributions</a></h3>

			<p>With 'Q10', Qhull does not special-case narrow distributions.
			See <a href=qh-impre.htm#limit>Limitations of merged facets</a> for
			more information.

			<h3><a href="#qhull">ｻ</a><a name="Q11">Q11 - copy normals and recompute
			centrums for
			tricoplanar facets</a></h3>

			Option '<a href="#Qt">Qt</a>' triangulates non-simplicial facets
			into "tricoplanar" facets.
			Normally tricoplanar facets share the same normal, centrum, and
			Voronoi vertex. They can not be merged or replaced. With
			option 'Q11', Qhull duplicates the normal and Voronoi vertex.
			It recomputes the centrum.

			<p>Use 'Q11' if you use the Qhull library to add points
			incrementally and call qh_triangulate() after each point.
			Otherwise, Qhull will report an error when it tries to
			merge and replace a tricoplanar facet.

			<p>With sufficient merging and new points, option 'Q11' may
			lead to precision problems such
			as duplicate ridges and concave facets. For example, if qh_triangulate()
			is added to qh_addpoint(), RBOX 1000 s W1e-12 t1001813667 P0 \| QHULL d Q11 Tv,
			reports an error due to a duplicate ridge.

			<!-- Navigation links -->
			<hr>

			<p><b>Up:</b> <a href="http://www.geom.umn.edu/software/qhull">Home page</a> for Qhull<br>
			<b>Up:</b> <a href="index.htm#TOC">Qhull manual</a>: Table of Contents<br>
			<b>To:</b> <a href="qh-quick.htm#programs">Programs</a>
			<a href="qh-quick.htm#options">Options</a>
			<a href="qh-opto.htm#output">Output</a>
			<a href="qh-optf.htm#format">Formats</a>
			<a href="qh-optg.htm#geomview">Geomview</a>
			<a href="qh-optp.htm#print">Print</a>
			<a href="qh-optq.htm#qhull">Qhull</a>
			<a href="qh-optc.htm#prec">Precision</a>
			<a href="qh-optt.htm#trace">Trace</a></p>
			<!-- GC common information -->
			<hr>

			<p><a href="http://www.geom.umn.edu/"><img src="qh--geom.gif"
			align="middle" width="40" height="40"></a><i>The Geometry Center
			Home Page </i></p>

			<p>Comments to: <a href=mailto:qhull@geom.umn.edu>qhull@geom.umn.edu</a>
			</a><br>
			Created: Sept. 25, 1995 --- <!-- hhmts start --> Last modified: see top <!-- hhmts end --> </p>
			</body>
			</html>

rCADDMESH/html/qh-optq.htmfb7d9109bc99dev/incorporate-qhull

qh-optq.htmView Options

rCADDMESH/html/qh-optq.htm
fb7d9109bc99dev/incorporate-qhull

qh-optq.htm
View Options