Homec4science
Diffusion CADD_mesher (master) Browse

rCADDMESH/eg/qhulltest-ok.txt
5a79a0009454master

Last Change
Raw File

qhulltest-ok.txt
View Options

********* Start testing of orgQhull::Qhull_test *********
Config: Using QTest library 4.7.4, Qt 4.7.4
PASS : orgQhull::Qhull_test::initTestCase()
INFO : Caught QH10023 Qhull error: checkIfQhullInitialized failed. Call runQhull() first.
PASS : orgQhull::Qhull_test::t_construct()
Expecting summary of halfspace intersection
Halfspace intersection by the convex hull of 4 points in 2-d:
Number of halfspaces: 4
Number of non-redundant halfspaces: 4
Number of intersection points: 4
Statistics for: normals of square | qhull H
Number of points processed: 4
Number of hyperplanes created: 6
Number of distance tests for qhull: 4
CPU seconds to compute hull (after input): 0
Expecting no output from qh_fprintf() in Qhull.cpp
Qhull output at end
Halfspace intersection by the convex hull of 4 points in 2-d:
Number of halfspaces: 4
Number of non-redundant halfspaces: 4
Number of intersection points: 4
Statistics for: normals of square | qhull H
Number of points processed: 4
Number of hyperplanes created: 6
Number of distance tests for qhull: 4
CPU seconds to compute hull (after input): 0
PASS : orgQhull::Qhull_test::t_attribute()
INFO : Caught QH6029 qhull error: option 'Fd' is not used with this program.
It may be used with qhull.
While executing: |
Options selected for Qhull 2015.2.r 2016/01/18:
run-id 103966907
INFO : Error stream without output stream
qhull error: option 'Fd' is not used with this program.
It may be used with qhull.
While executing: |
Options selected for Qhull 2015.2.r 2016/01/18:
run-id 103966907
INFO : Caught QH6029
INFO : Error output sent to output stream without error stream
qhull input error: feasible point is not clearly inside halfspace
feasible point: 0 0
halfspace: -0.5 -0.5
at offset: 0.5 and distance: 0.5
The halfspace was at index 1
While executing: rbox "c" | qhull Tz H0
Options selected for Qhull 2015.2.r 2016/01/18:
run-id 103966907 Tz-stdout Halfspace-about 0
INFO : Caught QH6023
INFO : No error stream or output stream
INFO : Caught QH6029 qhull error: option 'Fd' is not used with this program.
It may be used with qhull.
While executing: |
Options selected for Qhull 2015.2.r 2016/01/18:
run-id 103966907
PASS : orgQhull::Qhull_test::t_message()
Convex hull of 8 points in 3-d:
Number of vertices: 8
Number of facets: 6
Number of non-simplicial facets: 6
Statistics for: rbox "c" | qhull s
Number of points processed: 8
Number of hyperplanes created: 11
Number of distance tests for qhull: 35
Number of distance tests for merging: 84
Number of distance tests for checking: 56
Number of merged facets: 6
CPU seconds to compute hull (after input): 0
Convex hull of 8 points in 3-d:
Number of vertices: 8
Number of facets: 6
Number of non-simplicial facets: 6
Statistics for: rbox "c" | qhull
Number of points processed: 8
Number of hyperplanes created: 11
Number of distance tests for qhull: 35
Number of distance tests for merging: 84
Number of distance tests for checking: 56
Number of merged facets: 6
CPU seconds to compute hull (after input): 0
PASS : orgQhull::Qhull_test::t_getSet()
PASS : orgQhull::Qhull_test::t_getQh()
PASS : orgQhull::Qhull_test::t_getValue()
PASS : orgQhull::Qhull_test::t_foreach()
Expecting vertexList and facetList of a 3-d diamond.
3
6 8 12
0 0 -0.5
0 0 0.5
0 -0.5 0
0 0.5 0
-0.5 0 0
0.5 0 0
3 3 1 4
3 1 3 5
3 0 3 4
3 3 0 5
3 2 1 5
3 1 2 4
3 2 0 4
3 0 2 5
Expecting normals of a 3-d diamond.
4
8
-0.5773502691896258 0.5773502691896258 0.5773502691896258 -0.2886751345948129
0.5773502691896258 0.5773502691896258 0.5773502691896258 -0.2886751345948129
-0.5773502691896258 0.5773502691896258 -0.5773502691896258 -0.2886751345948129
0.5773502691896258 0.5773502691896258 -0.5773502691896258 -0.2886751345948129
0.5773502691896258 -0.5773502691896258 0.5773502691896258 -0.2886751345948129
-0.5773502691896258 -0.5773502691896258 0.5773502691896258 -0.2886751345948129
-0.5773502691896258 -0.5773502691896258 -0.5773502691896258 -0.2886751345948129
0.5773502691896258 -0.5773502691896258 -0.5773502691896258 -0.2886751345948129
PASS : orgQhull::Qhull_test::t_modify()
PASS : orgQhull::Qhull_test::cleanupTestCase()
Totals: 10 passed, 0 failed, 0 skipped
********* Finished testing of orgQhull::Qhull_test *********
********* Start testing of orgQhull::Coordinates_test *********
Config: Using QTest library 4.7.4, Qt 4.7.4
PASS : orgQhull::Coordinates_test::initTestCase()
PASS : orgQhull::Coordinates_test::t_construct()
PASS : orgQhull::Coordinates_test::t_convert()
PASS : orgQhull::Coordinates_test::t_element()
PASS : orgQhull::Coordinates_test::t_readonly()
PASS : orgQhull::Coordinates_test::t_operator()
PASS : orgQhull::Coordinates_test::t_const_iterator()
PASS : orgQhull::Coordinates_test::t_iterator()
PASS : orgQhull::Coordinates_test::t_coord_iterator()
PASS : orgQhull::Coordinates_test::t_mutable_coord_iterator()
PASS : orgQhull::Coordinates_test::t_readwrite()
PASS : orgQhull::Coordinates_test::t_search()
Coordinates 1-2-3
1 2 3 PASS : orgQhull::Coordinates_test::t_io()
PASS : orgQhull::Coordinates_test::cleanupTestCase()
Totals: 14 passed, 0 failed, 0 skipped
********* Finished testing of orgQhull::Coordinates_test *********
********* Start testing of orgQhull::PointCoordinates_test *********
Config: Using QTest library 4.7.4, Qt 4.7.4
PASS : orgQhull::PointCoordinates_test::initTestCase()
PASS : orgQhull::PointCoordinates_test::t_construct_q()
PASS : orgQhull::PointCoordinates_test::t_construct_qh()
PASS : orgQhull::PointCoordinates_test::t_convert()
INFO : Caught QH10063 Qhull error: can not change PointCoordinates dimension (from 3 to 2)
PASS : orgQhull::PointCoordinates_test::t_getset()
PASS : orgQhull::PointCoordinates_test::t_element()
PASS : orgQhull::PointCoordinates_test::t_foreach()
PASS : orgQhull::PointCoordinates_test::t_search()
PASS : orgQhull::PointCoordinates_test::t_modify()
PASS : orgQhull::PointCoordinates_test::t_append_points()
PASS : orgQhull::PointCoordinates_test::t_coord_iterator()
PointCoordinates 0-d
0
0
PointCoordinates 1,2 3,1 2,3
2
3
1 2
3 1
2 3
PASS : orgQhull::PointCoordinates_test::t_io()
PASS : orgQhull::PointCoordinates_test::cleanupTestCase()
Totals: 13 passed, 0 failed, 0 skipped
********* Finished testing of orgQhull::PointCoordinates_test *********
********* Start testing of orgQhull::QhullFacet_test *********
Config: Using QTest library 4.7.4, Qt 4.7.4
PASS : orgQhull::QhullFacet_test::initTestCase()
PASS : orgQhull::QhullFacet_test::t_construct_qh()
PASS : orgQhull::QhullFacet_test::t_constructConvert()
rbox c | qhull Qt QR0 QR1453170434 distanceEpsilon 1.12961e-015
18
19
22
24
26
27
30
31
34
35
38
39
Hyperplane: -0.266222 -0.0132844 0.96382 -0.5
InnerPlane: -0.266222 -0.0132844 0.96382 -0.5
innerOffset+0.5 1.05471e-015
OuterPlane: -0.266222 -0.0132844 0.96382 -0.5
outerOffset+0.5 -2.22045e-015
Center: -0.133111 -0.00664222 0.48191
Hyperplane: -0.266222 -0.0132844 0.96382 -0.5
InnerPlane: -0.266222 -0.0132844 0.96382 -0.5
innerOffset+0.5 1.05471e-015
OuterPlane: -0.266222 -0.0132844 0.96382 -0.5
outerOffset+0.5 -2.22045e-015
Center: -0.133111 -0.00664222 0.48191
Hyperplane: 0.706713 0.677289 0.20454 -0.5
InnerPlane: 0.706713 0.677289 0.20454 -0.5
innerOffset+0.5 1.11022e-015
OuterPlane: 0.706713 0.677289 0.20454 -0.5
outerOffset+0.5 -2.33147e-015
Center: 0.353356 0.338645 0.10227
Hyperplane: 0.706713 0.677289 0.20454 -0.5
InnerPlane: 0.706713 0.677289 0.20454 -0.5
innerOffset+0.5 1.11022e-015
OuterPlane: 0.706713 0.677289 0.20454 -0.5
outerOffset+0.5 -2.33147e-015
Center: 0.353356 0.338645 0.10227
Hyperplane: 0.655502 -0.735597 0.170921 -0.5
InnerPlane: 0.655502 -0.735597 0.170921 -0.5
innerOffset+0.5 1.16573e-015
OuterPlane: 0.655502 -0.735597 0.170921 -0.5
outerOffset+0.5 -2.22045e-015
Center: 0.327751 -0.367798 0.0854606
Hyperplane: 0.655502 -0.735597 0.170921 -0.5
InnerPlane: 0.655502 -0.735597 0.170921 -0.5
innerOffset+0.5 1.16573e-015
OuterPlane: 0.655502 -0.735597 0.170921 -0.5
outerOffset+0.5 -2.22045e-015
Center: 0.327751 -0.367798 0.0854606
Hyperplane: -0.655502 0.735597 -0.170921 -0.5
InnerPlane: -0.655502 0.735597 -0.170921 -0.5
innerOffset+0.5 1.05471e-015
OuterPlane: -0.655502 0.735597 -0.170921 -0.5
outerOffset+0.5 -2.44249e-015
Center: -0.327751 0.367798 -0.0854606
Hyperplane: -0.655502 0.735597 -0.170921 -0.5
InnerPlane: -0.655502 0.735597 -0.170921 -0.5
innerOffset+0.5 1.05471e-015
OuterPlane: -0.655502 0.735597 -0.170921 -0.5
outerOffset+0.5 -2.44249e-015
Center: -0.327751 0.367798 -0.0854606
Hyperplane: -0.706713 -0.677289 -0.20454 -0.5
InnerPlane: -0.706713 -0.677289 -0.20454 -0.5
innerOffset+0.5 1.22125e-015
OuterPlane: -0.706713 -0.677289 -0.20454 -0.5
outerOffset+0.5 -2.22045e-015
Center: -0.353356 -0.338645 -0.10227
Hyperplane: -0.706713 -0.677289 -0.20454 -0.5
InnerPlane: -0.706713 -0.677289 -0.20454 -0.5
innerOffset+0.5 1.22125e-015
OuterPlane: -0.706713 -0.677289 -0.20454 -0.5
outerOffset+0.5 -2.22045e-015
Center: -0.353356 -0.338645 -0.10227
Hyperplane: 0.266222 0.0132844 -0.96382 -0.5
InnerPlane: 0.266222 0.0132844 -0.96382 -0.5
innerOffset+0.5 1.05471e-015
OuterPlane: 0.266222 0.0132844 -0.96382 -0.5
outerOffset+0.5 -2.22045e-015
Center: 0.133111 0.00664222 -0.48191
Hyperplane: 0.266222 0.0132844 -0.96382 -0.5
InnerPlane: 0.266222 0.0132844 -0.96382 -0.5
innerOffset+0.5 1.05471e-015
OuterPlane: 0.266222 0.0132844 -0.96382 -0.5
outerOffset+0.5 -2.22045e-015
Center: 0.133111 0.00664222 -0.48191
rbox c | qhull d Qz Qt QR0 QR1453170434 distanceEpsilon 1.66334e-015
rbox c | qhull v Qz QR0 QR1453170434 distanceEpsilon 1.66334e-015
Voronoi vertex: -1.11022e-016 1.66533e-016 1.97758e-016
Is it within 400 * distanceEpsilon (6.65334e-013) of the origin?
PASS : orgQhull::QhullFacet_test::t_getSet()
PASS : orgQhull::QhullFacet_test::t_value()
PASS : orgQhull::QhullFacet_test::t_foreach()
- f1
- flags: bottom tested seen coplanar
- merges: 1
- normal: -0 -0 -1
- offset: -0.5
- center: 0 0 -0.5
- vertices: p6(v6) p2(v2) p4(v1) p0(v0)
- neighboring facets: f2 f3 f9 f10
- ridges:
- r4 tested
vertices: p2(v2) p0(v0)
between f1 and f3
- r3 tested
vertices: p4(v1) p0(v0)
between f2 and f1
- r1 tested
vertices: p6(v6) p4(v1)
between f9 and f1
- r2 tested
vertices: p6(v6) p2(v2)
between f1 and f10
With a message
- f1
- flags: bottom tested seen coplanar
- merges: 1
- normal: -0 -0 -1
- offset: -0.5
- center: 0 0 -0.5
- vertices: p6(v6) p2(v2) p4(v1) p0(v0)
- neighboring facets: f2 f3 f9 f10
- ridges:
- r4 tested
vertices: p2(v2) p0(v0)
between f1 and f3
- r3 tested
vertices: p4(v1) p0(v0)
between f2 and f1
- r1 tested
vertices: p6(v6) p4(v1)
between f9 and f1
- r2 tested
vertices: p6(v6) p2(v2)
between f1 and f10
Print header for the same facet
- f1
- flags: bottom tested seen coplanar
- merges: 1
- normal: -0 -0 -1
- offset: -0.5
- center: 0 0 -0.5
- vertices: p6(v6) p2(v2) p4(v1) p0(v0)
- neighboring facets: f2 f3 f9 f10
Print each component
- flags: bottom tested seen coplanar
- center: 0 0 -0.5
- ridges:
- r4 tested
vertices: p2(v2) p0(v0)
between f1 and f3
- r3 tested
vertices: p4(v1) p0(v0)
between f2 and f1
- r1 tested
vertices: p6(v6) p4(v1)
between f9 and f1
- r2 tested
vertices: p6(v6) p2(v2)
between f1 and f10
PASS : orgQhull::QhullFacet_test::t_io()
PASS : orgQhull::QhullFacet_test::cleanupTestCase()
Totals: 8 passed, 0 failed, 0 skipped
********* Finished testing of orgQhull::QhullFacet_test *********
********* Start testing of orgQhull::QhullFacetList_test *********
Config: Using QTest library 4.7.4, Qt 4.7.4
PASS : orgQhull::QhullFacetList_test::initTestCase()
PASS : orgQhull::QhullFacetList_test::t_construct_qh()
PASS : orgQhull::QhullFacetList_test::t_construct_q()
PASS : orgQhull::QhullFacetList_test::t_convert()
PASS : orgQhull::QhullFacetList_test::t_readonly()
PASS : orgQhull::QhullFacetList_test::t_foreach()
Show all of FacetList
Vertices for 3 facets
- p5 (v6): -0.107506 0.699801 0.49872
neighborFacets: f8 f6 f4
- p0 (v5): -0.158716 -0.713085 0.465101
neighborFacets: f6 f7 f13
- p1 (v3): 0.547996 -0.035796 0.669641
neighborFacets: f4 f6 f7
- p4 (v0): -0.814218 0.0225116 0.294179
neighborFacets: f6 f8 f13
- p2 (v7): 0.107506 -0.699801 -0.49872
neighborFacets: f11 f13 f7
- p3 (v1): 0.814218 -0.0225116 -0.294179
neighborFacets: f4 f7 f11
- p6 (v8): -0.547996 0.035796 -0.669641
neighborFacets: f8 f13 f11
- f6
- flags: bottom tested seen
- merges: 1
- normal: -0.266222 -0.0132844 0.96382
- offset: -0.5
- center: -0.133111 -0.00664222 0.48191
- vertices: p5(v6) p0(v5) p1(v3) p4(v0)
- neighboring facets: f7 f13 f8 f4
- ridges:
- r1 tested
vertices: p0(v5) p4(v0)
between f6 and f13
- r6 tested
vertices: p5(v6) p4(v0)
between f8 and f6
- r7 tested
vertices: p5(v6) p1(v3)
between f6 and f4
- r8 tested
vertices: p0(v5) p1(v3)
between f7 and f6
- f7
- flags: top tested seen coplanar
- merges: 1
- normal: 0.655502 -0.735597 0.170921
- offset: -0.5
- center: 0.327751 -0.367798 0.0854606
- vertices: p2(v7) p0(v5) p1(v3) p3(v1)
- neighboring facets: f4 f6 f11 f13
- ridges:
- r11 tested
vertices: p1(v3) p3(v1)
between f7 and f4
- r13 tested
vertices: p2(v7) p3(v1)
between f11 and f7
- r14 tested
vertices: p2(v7) p0(v5)
between f7 and f13
- r8 tested
vertices: p0(v5) p1(v3)
between f7 and f6
- f13
- flags: bottom tested seen coplanar
- merges: 1
- normal: -0.706713 -0.677289 -0.20454
- offset: -0.5
- center: -0.353356 -0.338645 -0.10227
- vertices: p6(v8) p2(v7) p0(v5) p4(v0)
- neighboring facets: f6 f8 f7 f11
- ridges:
- r1 tested
vertices: p0(v5) p4(v0)
between f6 and f13
- r14 tested
vertices: p2(v7) p0(v5)
between f7 and f13
- r19 tested
vertices: p6(v8) p2(v7)
between f11 and f13
- r16 tested
vertices: p6(v8) p4(v0)
between f13 and f8
Facets only
- f6
- flags: bottom tested seen
- merges: 1
- normal: -0.266222 -0.0132844 0.96382
- offset: -0.5
- center: -0.133111 -0.00664222 0.48191
- vertices: p5(v6) p0(v5) p1(v3) p4(v0)
- neighboring facets: f7 f13 f8 f4
- ridges:
- r1 tested
vertices: p0(v5) p4(v0)
between f6 and f13
- r6 tested
vertices: p5(v6) p4(v0)
between f8 and f6
- r7 tested
vertices: p5(v6) p1(v3)
between f6 and f4
- r8 tested
vertices: p0(v5) p1(v3)
between f7 and f6
- f7
- flags: top tested seen coplanar
- merges: 1
- normal: 0.655502 -0.735597 0.170921
- offset: -0.5
- center: 0.327751 -0.367798 0.0854606
- vertices: p2(v7) p0(v5) p1(v3) p3(v1)
- neighboring facets: f4 f6 f11 f13
- ridges:
- r11 tested
vertices: p1(v3) p3(v1)
between f7 and f4
- r13 tested
vertices: p2(v7) p3(v1)
between f11 and f7
- r14 tested
vertices: p2(v7) p0(v5)
between f7 and f13
- r8 tested
vertices: p0(v5) p1(v3)
between f7 and f6
- f13
- flags: bottom tested seen coplanar
- merges: 1
- normal: -0.706713 -0.677289 -0.20454
- offset: -0.5
- center: -0.353356 -0.338645 -0.10227
- vertices: p6(v8) p2(v7) p0(v5) p4(v0)
- neighboring facets: f6 f8 f7 f11
- ridges:
- r1 tested
vertices: p0(v5) p4(v0)
between f6 and f13
- r14 tested
vertices: p2(v7) p0(v5)
between f7 and f13
- r19 tested
vertices: p6(v8) p2(v7)
between f11 and f13
- r16 tested
vertices: p6(v8) p4(v0)
between f13 and f8
Vertices only
- p5 (v6): -0.107506 0.699801 0.49872
neighborFacets: f8 f6 f4
- p0 (v5): -0.158716 -0.713085 0.465101
neighborFacets: f6 f7 f13
- p1 (v3): 0.547996 -0.035796 0.669641
neighborFacets: f4 f6 f7
- p4 (v0): -0.814218 0.0225116 0.294179
neighborFacets: f6 f8 f13
- p2 (v7): 0.107506 -0.699801 -0.49872
neighborFacets: f11 f13 f7
- p3 (v1): 0.814218 -0.0225116 -0.294179
neighborFacets: f4 f7 f11
- p6 (v8): -0.547996 0.035796 -0.669641
neighborFacets: f8 f13 f11
PASS : orgQhull::QhullFacetList_test::t_io()
PASS : orgQhull::QhullFacetList_test::cleanupTestCase()
Totals: 8 passed, 0 failed, 0 skipped
********* Finished testing of orgQhull::QhullFacetList_test *********
********* Start testing of orgQhull::QhullFacetSet_test *********
Config: Using QTest library 4.7.4, Qt 4.7.4
PASS : orgQhull::QhullFacetSet_test::initTestCase()
PASS : orgQhull::QhullFacetSet_test::t_construct()
PASS : orgQhull::QhullFacetSet_test::t_convert()
PASS : orgQhull::QhullFacetSet_test::t_readonly()
PASS : orgQhull::QhullFacetSet_test::t_foreach()
Neighbors of first facet with point 0- f7
- flags: top tested seen coplanar
- merges: 1
- normal: 0.655502 -0.735597 0.170921
- offset: -0.5
- center: 0.327751 -0.367798 0.0854606
- vertices: p2(v7) p0(v5) p1(v3) p3(v1)
- neighboring facets: f4 f6 f11 f13
- ridges:
- r11 tested
vertices: p1(v3) p3(v1)
between f7 and f4
- r13 tested
vertices: p2(v7) p3(v1)
between f11 and f7
- r14 tested
vertices: p2(v7) p0(v5)
between f7 and f13
- r8 tested
vertices: p0(v5) p1(v3)
between f7 and f6
- f13
- flags: bottom tested seen coplanar
- merges: 1
- normal: -0.706713 -0.677289 -0.20454
- offset: -0.5
- center: -0.353356 -0.338645 -0.10227
- vertices: p6(v8) p2(v7) p0(v5) p4(v0)
- neighboring facets: f6 f8 f7 f11
- ridges:
- r1 tested
vertices: p0(v5) p4(v0)
between f6 and f13
- r14 tested
vertices: p2(v7) p0(v5)
between f7 and f13
- r19 tested
vertices: p6(v8) p2(v7)
between f11 and f13
- r16 tested
vertices: p6(v8) p4(v0)
between f13 and f8
Facet identifiers: f7 f13
PASS : orgQhull::QhullFacetSet_test::t_io()
PASS : orgQhull::QhullFacetSet_test::cleanupTestCase()
Totals: 7 passed, 0 failed, 0 skipped
********* Finished testing of orgQhull::QhullFacetSet_test *********
********* Start testing of orgQhull::QhullHyperplane_test *********
Config: Using QTest library 4.7.4, Qt 4.7.4
PASS : orgQhull::QhullHyperplane_test::initTestCase()
PASS : orgQhull::QhullHyperplane_test::t_construct()
PASS : orgQhull::QhullHyperplane_test::t_construct_qh()
PASS : orgQhull::QhullHyperplane_test::t_convert()
h18
h19
h22
h24
h26
h27
h30
h31
h34
h35
h38
h39
PASS : orgQhull::QhullHyperplane_test::t_readonly()
PASS : orgQhull::QhullHyperplane_test::t_define()
angle 0
PASS : orgQhull::QhullHyperplane_test::t_value()
PASS : orgQhull::QhullHyperplane_test::t_operator()
PASS : orgQhull::QhullHyperplane_test::t_iterator()
PASS : orgQhull::QhullHyperplane_test::t_const_iterator()
PASS : orgQhull::QhullHyperplane_test::t_qhullHyperplane_iterator()
Hyperplane:
-0 -0 -1 -0.5
message -0 -0 -1 -0.5
and a message -0 -0 -1 offset -0.5
PASS : orgQhull::QhullHyperplane_test::t_io()
PASS : orgQhull::QhullHyperplane_test::cleanupTestCase()
Totals: 13 passed, 0 failed, 0 skipped
********* Finished testing of orgQhull::QhullHyperplane_test *********
********* Start testing of orgQhull::QhullLinkedList_test *********
Config: Using QTest library 4.7.4, Qt 4.7.4
PASS : orgQhull::QhullLinkedList_test::initTestCase()
PASS : orgQhull::QhullLinkedList_test::t_construct()
PASS : orgQhull::QhullLinkedList_test::t_convert()
PASS : orgQhull::QhullLinkedList_test::t_element()
PASS : orgQhull::QhullLinkedList_test::t_search()
PASS : orgQhull::QhullLinkedList_test::t_iterator()
PASS : orgQhull::QhullLinkedList_test::t_const_iterator()
PASS : orgQhull::QhullLinkedList_test::t_QhullLinkedList_iterator()
INFO: empty QhullVertextList
INFO: - p0 (v2): -0.0879639 0.801034 -0.317186
neighborFacets: f3 f4 f6
- p7 (v8): 0.0879639 -0.801034 0.317186
neighborFacets: f8 f11 f13
- p6 (v5): -0.315091 -0.0274652 0.806203
neighborFacets: f6 f8 f13
- p3 (v1): 0.838612 -0.215926 0.0103054
neighborFacets: f4 f8 f11
- p5 (v7): -0.435558 -0.557643 -0.499323
neighborFacets: f11 f3 f13
- p2 (v6): 0.435558 0.557643 0.499323
neighborFacets: f8 f4 f6
- p1 (v3): 0.315091 0.0274652 -0.806203
neighborFacets: f3 f4 f11
- p4 (v0): -0.838612 0.215926 -0.0103054
neighborFacets: f3 f6 f13
PASS : orgQhull::QhullLinkedList_test::t_io()
PASS : orgQhull::QhullLinkedList_test::cleanupTestCase()
Totals: 10 passed, 0 failed, 0 skipped
********* Finished testing of orgQhull::QhullLinkedList_test *********
********* Start testing of orgQhull::QhullPoint_test *********
Config: Using QTest library 4.7.4, Qt 4.7.4
PASS : orgQhull::QhullPoint_test::initTestCase()
PASS : orgQhull::QhullPoint_test::t_construct()
PASS : orgQhull::QhullPoint_test::t_convert()
Point ids in 'rbox c'
p2
p1
p3
p0
p6
p4
p5
p7
PASS : orgQhull::QhullPoint_test::t_readonly()
PASS : orgQhull::QhullPoint_test::t_define()
PASS : orgQhull::QhullPoint_test::t_operator()
PASS : orgQhull::QhullPoint_test::t_iterator()
PASS : orgQhull::QhullPoint_test::t_const_iterator()
PASS : orgQhull::QhullPoint_test::t_qhullpoint_iterator()
PASS : orgQhull::QhullPoint_test::t_method()
Point:
0.5 -0.5 -0.5
Point w/ print:
message 0.5 -0.5 -0.5
Point with id and a message p4: 0.5 -0.5 -0.5
PASS : orgQhull::QhullPoint_test::t_io()
PASS : orgQhull::QhullPoint_test::cleanupTestCase()
Totals: 12 passed, 0 failed, 0 skipped
********* Finished testing of orgQhull::QhullPoint_test *********
********* Start testing of orgQhull::QhullPoints_test *********
Config: Using QTest library 4.7.4, Qt 4.7.4
PASS : orgQhull::QhullPoints_test::initTestCase()
PASS : orgQhull::QhullPoints_test::t_construct_q()
PASS : orgQhull::QhullPoints_test::t_construct_qh()
PASS : orgQhull::QhullPoints_test::t_convert()
PASS : orgQhull::QhullPoints_test::t_getset()
PASS : orgQhull::QhullPoints_test::t_element()
PASS : orgQhull::QhullPoints_test::t_iterator()
PASS : orgQhull::QhullPoints_test::t_const_iterator()
PASS : orgQhull::QhullPoints_test::t_search()
PASS : orgQhull::QhullPoints_test::t_points_iterator()
Empty QhullPoints
QhullPoints from c[]
0 1 2
3 4 5
QhullPoints
-0.0879639 0.801034 -0.317186
0.315091 0.0274652 -0.806203
0.435558 0.557643 0.499323
0.838612 -0.215926 0.0103054
-0.838612 0.215926 -0.0103054
-0.435558 -0.557643 -0.499323
-0.315091 -0.0274652 0.806203
0.0879639 -0.801034 0.317186
message
-0.0879639 0.801034 -0.317186
0.315091 0.0274652 -0.806203
0.435558 0.557643 0.499323
0.838612 -0.215926 0.0103054
-0.838612 0.215926 -0.0103054
-0.435558 -0.557643 -0.499323
-0.315091 -0.0274652 0.806203
0.0879639 -0.801034 0.317186
w/ identifiers
p0: -0.0879639 0.801034 -0.317186
p1: 0.315091 0.0274652 -0.806203
p2: 0.435558 0.557643 0.499323
p3: 0.838612 -0.215926 0.0103054
p4: -0.838612 0.215926 -0.0103054
p5: -0.435558 -0.557643 -0.499323
p6: -0.315091 -0.0274652 0.806203
p7: 0.0879639 -0.801034 0.317186
PASS : orgQhull::QhullPoints_test::t_io()
PASS : orgQhull::QhullPoints_test::cleanupTestCase()
Totals: 12 passed, 0 failed, 0 skipped
********* Finished testing of orgQhull::QhullPoints_test *********
********* Start testing of orgQhull::QhullPointSet_test *********
Config: Using QTest library 4.7.4, Qt 4.7.4
PASS : orgQhull::QhullPointSet_test::initTestCase()
PASS : orgQhull::QhullPointSet_test::t_construct()
PASS : orgQhull::QhullPointSet_test::t_convert()
PASS : orgQhull::QhullPointSet_test::t_element()
PASS : orgQhull::QhullPointSet_test::t_iterator()
PASS : orgQhull::QhullPointSet_test::t_const_iterator()
PASS : orgQhull::QhullPointSet_test::t_search()
PASS : orgQhull::QhullPointSet_test::t_pointset_iterator()
QhullPointSet from coplanarPoints
0.368247 0.129543 0.5
0.35127 -0.210684 0.5
0.313266 0.0568358 0.5
0.0344498 -0.00151988 0.5
-0.000258967 -0.352467 0.5
0.44098 -0.449916 0.5
-0.300445 0.416634 0.5
-0.336919 0.403301 0.5
-0.442525 0.486883 0.5
0.100394 0.317561 0.5
0.188981 0.202207 0.5
0.196243 0.25294 0.5
-0.082514 0.186773 0.5
-0.22729 -0.0635886 0.5
-0.148985 0.0132737 0.5
-0.340232 -0.287248 0.5
-0.17844 -0.0395658 0.5
-0.114231 0.126861 0.5
-0.0840006 0.201191 0.5
-0.499992 -0.368462 0.5
0.076173 0.238959 0.5
0.0545838 0.390737 0.5
0.404653 0.00452289 0.5
With message
0.368247 0.129543 0.5
0.35127 -0.210684 0.5
0.313266 0.0568358 0.5
0.0344498 -0.00151988 0.5
-0.000258967 -0.352467 0.5
0.44098 -0.449916 0.5
-0.300445 0.416634 0.5
-0.336919 0.403301 0.5
-0.442525 0.486883 0.5
0.100394 0.317561 0.5
0.188981 0.202207 0.5
0.196243 0.25294 0.5
-0.082514 0.186773 0.5
-0.22729 -0.0635886 0.5
-0.148985 0.0132737 0.5
-0.340232 -0.287248 0.5
-0.17844 -0.0395658 0.5
-0.114231 0.126861 0.5
-0.0840006 0.201191 0.5
-0.499992 -0.368462 0.5
0.076173 0.238959 0.5
0.0545838 0.390737 0.5
0.404653 0.00452289 0.5
Coplanar points: p21 p51 p80 p27 p34 p19 p57 p97 p108 p48 p50 p75 p5 p12 p23 p29 p87 p100 p7 p0 p110 p28 p15
As a point set:
0.368247 0.129543 0.5
0.35127 -0.210684 0.5
0.313266 0.0568358 0.5
0.0344498 -0.00151988 0.5
-0.000258967 -0.352467 0.5
0.44098 -0.449916 0.5
-0.300445 0.416634 0.5
-0.336919 0.403301 0.5
-0.442525 0.486883 0.5
0.100394 0.317561 0.5
0.188981 0.202207 0.5
0.196243 0.25294 0.5
-0.082514 0.186773 0.5
-0.22729 -0.0635886 0.5
-0.148985 0.0132737 0.5
-0.340232 -0.287248 0.5
-0.17844 -0.0395658 0.5
-0.114231 0.126861 0.5
-0.0840006 0.201191 0.5
-0.499992 -0.368462 0.5
0.076173 0.238959 0.5
0.0545838 0.390737 0.5
0.404653 0.00452289 0.5
PASS : orgQhull::QhullPointSet_test::t_io()
PASS : orgQhull::QhullPointSet_test::cleanupTestCase()
Totals: 10 passed, 0 failed, 0 skipped
********* Finished testing of orgQhull::QhullPointSet_test *********
********* Start testing of orgQhull::QhullRidge_test *********
Config: Using QTest library 4.7.4, Qt 4.7.4
PASS : orgQhull::QhullRidge_test::initTestCase()
PASS : orgQhull::QhullRidge_test::t_construct()
4
8
6
7
PASS : orgQhull::QhullRidge_test::t_getSet()
PASS : orgQhull::QhullRidge_test::t_foreach()
Ridges
- r4 tested
vertices: p2(v2) p0(v0)
between f1 and f3
- r3 tested
vertices: p4(v1) p0(v0)
between f2 and f1
- r1 tested
vertices: p6(v6) p4(v1)
between f9 and f1
- r2 tested
vertices: p6(v6) p2(v2)
between f1 and f10
Ridge
- r4 tested
vertices: p2(v2) p0(v0)
between f1 and f3
Ridge with message r4 tested
vertices: p2(v2) p0(v0)
between f1 and f3
PASS : orgQhull::QhullRidge_test::t_io()
PASS : orgQhull::QhullRidge_test::cleanupTestCase()
Totals: 6 passed, 0 failed, 0 skipped
********* Finished testing of orgQhull::QhullRidge_test *********
********* Start testing of orgQhull::QhullSet_test *********
Config: Using QTest library 4.7.4, Qt 4.7.4
PASS : orgQhull::QhullSet_test::initTestCase()
PASS : orgQhull::QhullSet_test::t_qhullsetbase()
PASS : orgQhull::QhullSet_test::t_convert()
PASS : orgQhull::QhullSet_test::t_element()
PASS : orgQhull::QhullSet_test::t_search()
PASS : orgQhull::QhullSet_test::t_iterator()
PASS : orgQhull::QhullSet_test::t_const_iterator()
PASS : orgQhull::QhullSet_test::t_qhullset_iterator()
INFO: empty set
INFO: Neighboring facets
- f3
- flags: top tested seen coplanar
- merges: 1
- normal: -0.523521 0.243391 -0.816509
- offset: -0.5
- center: -0.261761 0.121695 -0.408254
- vertices: p5(v7) p1(v3) p0(v2) p4(v0)
- neighboring facets: f6 f4 f13 f11
- ridges:
- r11 tested
vertices: p0(v2) p4(v0)
between f3 and f6
- r13 tested
vertices: p5(v7) p4(v0)
between f13 and f3
- r14 tested
vertices: p5(v7) p1(v3)
between f3 and f11
- r8 tested
vertices: p1(v3) p0(v2)
between f3 and f4
- f11
- flags: bottom tested seen coplanar
- merges: 1
- normal: 0.403054 -0.773569 -0.489018
- offset: -0.5
- center: 0.201527 -0.386784 -0.244509
- vertices: p7(v8) p5(v7) p1(v3) p3(v1)
- neighboring facets: f4 f8 f3 f13
- ridges:
- r4 tested
vertices: p1(v3) p3(v1)
between f4 and f11
- r14 tested
vertices: p5(v7) p1(v3)
between f3 and f11
- r19 tested
vertices: p7(v8) p5(v7)
between f13 and f11
- r16 tested
vertices: p7(v8) p3(v1)
between f11 and f8
- f8
- flags: bottom tested seen coplanar
- merges: 1
- normal: 0.523521 -0.243391 0.816509
- offset: -0.5
- center: 0.261761 -0.121695 0.408254
- vertices: p7(v8) p2(v6) p6(v5) p3(v1)
- neighboring facets: f6 f4 f11 f13
- ridges:
- r10 tested
vertices: p2(v6) p6(v5)
between f6 and f8
- r6 tested
vertices: p2(v6) p3(v1)
between f8 and f4
- r16 tested
vertices: p7(v8) p3(v1)
between f11 and f8
- r17 tested
vertices: p7(v8) p6(v5)
between f8 and f13
- f6
- flags: bottom tested seen
- merges: 1
- normal: -0.403054 0.773569 0.489018
- offset: -0.5
- center: -0.201527 0.386784 0.244509
- vertices: p2(v6) p6(v5) p0(v2) p4(v0)
- neighboring facets: f3 f13 f4 f8
- ridges:
- r1 tested
vertices: p6(v5) p4(v0)
between f6 and f13
- r11 tested
vertices: p0(v2) p4(v0)
between f3 and f6
- r7 tested
vertices: p2(v6) p0(v2)
between f4 and f6
- r10 tested
vertices: p2(v6) p6(v5)
between f6 and f8
INFO: Ridges for a facet
- r4 tested
vertices: p1(v3) p3(v1)
between f4 and f11
- r8 tested
vertices: p1(v3) p0(v2)
between f3 and f4
- r6 tested
vertices: p2(v6) p3(v1)
between f8 and f4
- r7 tested
vertices: p2(v6) p0(v2)
between f4 and f6
PASS : orgQhull::QhullSet_test::t_io()
PASS : orgQhull::QhullSet_test::cleanupTestCase()
Totals: 10 passed, 0 failed, 0 skipped
********* Finished testing of orgQhull::QhullSet_test *********
********* Start testing of orgQhull::QhullVertex_test *********
Config: Using QTest library 4.7.4, Qt 4.7.4
PASS : orgQhull::QhullVertex_test::initTestCase()
PASS : orgQhull::QhullVertex_test::t_constructConvert()
6
3
1
2
5
0
7
8
Point 2:
0.435558 0.557643 0.499323
Point 1:
0.315091 0.0274652 -0.806203
Point 3:
0.838612 -0.215926 0.0103054
Point 0:
-0.0879639 0.801034 -0.317186
Point 6:
-0.315091 -0.0274652 0.806203
Point 4:
-0.838612 0.215926 -0.0103054
Point 5:
-0.435558 -0.557643 -0.499323
Point 7:
0.0879639 -0.801034 0.317186
PASS : orgQhull::QhullVertex_test::t_getSet()
PASS : orgQhull::QhullVertex_test::t_foreach()
Vertex and vertices:
- p4 (v1): 0.5 -0.5 -0.5
neighborFacets: f1 f2 f9
p6(v6) p2(v2) p4(v1) p0(v0)
Vertex and vertices with message:
Vertex p4 (v1): 0.5 -0.5 -0.5
neighborFacets: f1 f2 f9
Vertices: p6(v6) p2(v2) p4(v1) p0(v0)
Try again with simplicial facets. No neighboring facets listed for vertices.
Vertex and vertices:
- p0 (v5): -0.0222149 -0.366435 0.327062
This time with neighborFacets() defined for all vertices:
- p0 (v5): -0.0222149 -0.366435 0.327062
neighborFacets: f5 f6 f7 f8
Try again with Voronoi diagram of simplicial facets. Neighboring facets automatically defined for vertices.
Vertex and vertices:
- p7 (v1): 0.386746 0.0449288 0.118336 0.165595
neighborFacets: f1 f6 f9 f13 f14 f15 f16 f18 f19 f21
PASS : orgQhull::QhullVertex_test::t_io()
PASS : orgQhull::QhullVertex_test::cleanupTestCase()
Totals: 6 passed, 0 failed, 0 skipped
********* Finished testing of orgQhull::QhullVertex_test *********
********* Start testing of orgQhull::QhullVertexSet_test *********
Config: Using QTest library 4.7.4, Qt 4.7.4
PASS : orgQhull::QhullVertexSet_test::initTestCase()
INFO : Cube rotated by QR1453170435
PASS : orgQhull::QhullVertexSet_test::t_construct()
INFO : Cube rotated by QR1453170435
PASS : orgQhull::QhullVertexSet_test::t_convert()
PASS : orgQhull::QhullVertexSet_test::t_readonly()
INFO : Cube rotated by QR1453170435
PASS : orgQhull::QhullVertexSet_test::t_foreach()
INFO : Cube rotated by QR1453170435
Vertices of first facet with point 0 p2(v6) p1(v3) p0(v2) p3(v1)
Vertex identifiers: v6 v3 v2 v1
PASS : orgQhull::QhullVertexSet_test::t_io()
PASS : orgQhull::QhullVertexSet_test::cleanupTestCase()
Totals: 7 passed, 0 failed, 0 skipped
********* Finished testing of orgQhull::QhullVertexSet_test *********
********* Start testing of orgQhull::RboxPoints_test *********
Config: Using QTest library 4.7.4, Qt 4.7.4
PASS : orgQhull::RboxPoints_test::initTestCase()
PASS : orgQhull::RboxPoints_test::t_construct()
INFO : Caught QH6189 rbox error: dimension, D0, out of bounds (>=200 or <=0)
INFO : Caught QH10062 Qhull error: can not set PointCoordinates dimension to -1
PASS : orgQhull::RboxPoints_test::t_error()
PASS : orgQhull::RboxPoints_test::t_test()
INFO : Caught QH10063 Qhull error: can not change PointCoordinates dimension (from 2 to 102)
PASS : orgQhull::RboxPoints_test::t_getSet()
PASS : orgQhull::RboxPoints_test::t_foreach()
INFO : Caught QH10012 Qhull error: expected 4 2-d PointCoordinates but read 3 PointCoordinates plus 1 extra coordinates
PASS : orgQhull::RboxPoints_test::t_change()
PASS : orgQhull::RboxPoints_test::t_ostream()
PASS : orgQhull::RboxPoints_test::cleanupTestCase()
Totals: 9 passed, 0 failed, 0 skipped
********* Finished testing of orgQhull::RboxPoints_test *********
********* Start testing of orgQhull::Qhull_test *********
Config: Using QTest library 4.7.4, Qt 4.7.4
PASS : orgQhull::Qhull_test::initTestCase()
INFO : Caught QH10023 Qhull error: checkIfQhullInitialized failed. Call runQhull() first.
PASS : orgQhull::Qhull_test::t_construct()
Expecting summary of halfspace intersection
Halfspace intersection by the convex hull of 4 points in 2-d:
Number of halfspaces: 4
Number of non-redundant halfspaces: 4
Number of intersection points: 4
Statistics for: normals of square | qhull H
Number of points processed: 4
Number of hyperplanes created: 6
Number of distance tests for qhull: 4
CPU seconds to compute hull (after input): 0
Expecting no output from qh_fprintf() in Qhull.cpp
Qhull output at end
Halfspace intersection by the convex hull of 4 points in 2-d:
Number of halfspaces: 4
Number of non-redundant halfspaces: 4
Number of intersection points: 4
Statistics for: normals of square | qhull H
Number of points processed: 4
Number of hyperplanes created: 6
Number of distance tests for qhull: 4
CPU seconds to compute hull (after input): 0
PASS : orgQhull::Qhull_test::t_attribute()
INFO : Caught QH6029 qhull error: option 'Fd' is not used with this program.
It may be used with qhull.
While executing: |
Options selected for Qhull 2015.2.r 2016/01/18:
run-id 103983714
INFO : Error stream without output stream
qhull error: option 'Fd' is not used with this program.
It may be used with qhull.
While executing: |
Options selected for Qhull 2015.2.r 2016/01/18:
run-id 103983714
INFO : Caught QH6029
INFO : Error output sent to output stream without error stream
qhull input error: feasible point is not clearly inside halfspace
feasible point: 0 0
halfspace: -0.5 -0.5
at offset: 0.5 and distance: 0.5
The halfspace was at index 1
While executing: rbox "c" | qhull Tz H0
Options selected for Qhull 2015.2.r 2016/01/18:
run-id 103983714 Tz-stdout Halfspace-about 0
INFO : Caught QH6023
INFO : No error stream or output stream
INFO : Caught QH6029 qhull error: option 'Fd' is not used with this program.
It may be used with qhull.
While executing: |
Options selected for Qhull 2015.2.r 2016/01/18:
run-id 103983714
PASS : orgQhull::Qhull_test::t_message()
Convex hull of 8 points in 3-d:
Number of vertices: 8
Number of facets: 6
Number of non-simplicial facets: 6
Statistics for: rbox "c" | qhull s
Number of points processed: 8
Number of hyperplanes created: 11
Number of distance tests for qhull: 35
Number of distance tests for merging: 84
Number of distance tests for checking: 56
Number of merged facets: 6
CPU seconds to compute hull (after input): 0
Convex hull of 8 points in 3-d:
Number of vertices: 8
Number of facets: 6
Number of non-simplicial facets: 6
Statistics for: rbox "c" | qhull
Number of points processed: 8
Number of hyperplanes created: 11
Number of distance tests for qhull: 35
Number of distance tests for merging: 84
Number of distance tests for checking: 56
Number of merged facets: 6
CPU seconds to compute hull (after input): 0
PASS : orgQhull::Qhull_test::t_getSet()
PASS : orgQhull::Qhull_test::t_getQh()
PASS : orgQhull::Qhull_test::t_getValue()
PASS : orgQhull::Qhull_test::t_foreach()
Expecting vertexList and facetList of a 3-d diamond.
3
6 8 12
0 0 -0.5
0 0 0.5
0 -0.5 0
0 0.5 0
-0.5 0 0
0.5 0 0
3 3 1 4
3 1 3 5
3 0 3 4
3 3 0 5
3 2 1 5
3 1 2 4
3 2 0 4
3 0 2 5
Expecting normals of a 3-d diamond.
4
8
-0.5773502691896258 0.5773502691896258 0.5773502691896258 -0.2886751345948129
0.5773502691896258 0.5773502691896258 0.5773502691896258 -0.2886751345948129
-0.5773502691896258 0.5773502691896258 -0.5773502691896258 -0.2886751345948129
0.5773502691896258 0.5773502691896258 -0.5773502691896258 -0.2886751345948129
0.5773502691896258 -0.5773502691896258 0.5773502691896258 -0.2886751345948129
-0.5773502691896258 -0.5773502691896258 0.5773502691896258 -0.2886751345948129
-0.5773502691896258 -0.5773502691896258 -0.5773502691896258 -0.2886751345948129
0.5773502691896258 -0.5773502691896258 -0.5773502691896258 -0.2886751345948129
PASS : orgQhull::Qhull_test::t_modify()
PASS : orgQhull::Qhull_test::cleanupTestCase()
Totals: 10 passed, 0 failed, 0 skipped
********* Finished testing of orgQhull::Qhull_test *********
Passed 131 tests.
Finished test of libqhullcpp. Test libqhull_r with eg/q_test after building libqhull_r/Makefile
c4science · Help