Homec4science
Diffusion Instrument Control (FreqRINCal) Browse

rINSTCONTROL/@MyInstrument/MyInstrument.m
c4ebc31daf60FreqRINCal

Last Change
Raw File

MyInstrument.m
View Options

classdef MyInstrument < dynamicprops
properties (SetAccess=protected, GetAccess=public)
name='';
interface='';
address='';
%Logical for whether gui is enabled
enable_gui=false;
%Contains the GUI handles
Gui;
%Contains the device object
Device;
%Input parser for class constructor
Parser;
%Contains a list of the commands available for the instrument as
%well as the default values and input requirements
CommandList=struct();
%Parses commands using an inputParser object
CommandParser;
%Trace object for storing data
Trace=MyTrace();
end
properties (Constant=true)
% Default parameters for VISA connection
DEFAULT_INP_BUFF_SIZE = 1e7; % buffer size bytes
DEFAULT_OUT_BUFF_SIZE = 1e7; % buffer size bytes
DEFAULT_TIMEOUT = 10; % Timeout in s
DEFAULT_VISA_BRAND = 'ni';
end
properties (Dependent=true)
command_names;
command_no;
write_commands;
read_commands;
end
events
NewData;
end
methods (Access=private)
function createParser(this)
p=inputParser();
addRequired(p,'interface',@ischar);
addRequired(p,'address',@ischar);
addParameter(p,'name','',@ischar);
addParameter(p,'gui','',@ischar);
addParameter(p,'visa_brand',this.DEFAULT_VISA_BRAND,@ischar);
this.Parser=p;
end
end
methods (Access=public)
function this=MyInstrument(interface, address, varargin)
createParser(this);
parse(this.Parser,interface,address,varargin{:});
%Loads parsed variables into class properties
this.name=this.Parser.Results.name;
this.interface=this.Parser.Results.interface;
this.address=this.Parser.Results.address;
this.enable_gui=~ismember('gui',this.Parser.UsingDefaults);
%If a gui input is given, load the gui
if this.enable_gui
%Loads the gui from the input gui string
this.Gui=guihandles(eval(this.Parser.Results.gui));
%Sets figure close function such that class will know when
%figure is closed
ind=structfun(@(x) isa(x,'matlab.ui.Figure'),...
this.Gui);
names=fieldnames(this.Gui);
set(this.Gui.(names{ind}), 'CloseRequestFcn',...
@(hObject,eventdata) closeFigure(this, hObject, ...
eventdata));
end
end
function delete(this)
%Removes close function from figure, prevents infinite loop
if this.enable_gui
ind=structfun(@(x) isa(x,'matlab.ui.Figure'),...
this.Gui);
names=fieldnames(this.Gui);
set(this.Gui.(names{ind}), 'CloseRequestFcn',...
@(hObject,eventdata) closeFigure(this, hObject, ...
eventdata));
%Deletes the figure handles
structfun(@(x) delete(x), this.Gui);
%Removes the figure handle to prevent memory leaks
this.Gui=[];
end
%Closes the connection to the device
closeDevice(this);
%Deletes the device object
delete(this.Device);
clear('this.Device');
end
%Clears data from trace to save memory.
function clearData(this)
this.Trace.x=[];
this.Trace.y=[];
end
%Writes properties to device. Can take multiple inputs. With the
%option all, the function writes default to all the
%available writeable parameters.
function writeProperty(this, varargin)
%Parses the inputs using the CommandParser
parse(this.CommandParser, varargin{:});
if this.CommandParser.Results.all
% If the 'all' is true, write all the commands
exec=this.write_commands;
else
% Check which commands were passed values
ind_val=cellfun(@(x)...
(~ismember(x, this.CommandParser.UsingDefaults)),...
this.write_commands);
exec=this.write_commands(ind_val);
end
for i=1:length(exec)
%Creates the write command using the right string spec
write_command=[this.CommandList.(exec{i}).command,...
' ',this.CommandList.(exec{i}).str_spec];
%Gets the value to write to the device
this.(exec{i})=this.CommandParser.Results.(exec{i});
command=sprintf(write_command, this.(exec{i}));
%Sends command to device
fprintf(this.Device, command);
end
end
% Wrapper for writeProperty that opens and closes the device
function writePropertyHedged(this, varargin)
this.openDevice();
try
this.writeProperty(varargin{:});
catch
warning('Error while writing the properties:');
disp(varargin);
end
this.readProperty('all');
this.closeDevice();
end
function result=readProperty(this, varargin)
result = struct();
read_all_flag = any(strcmp('all',varargin));
if read_all_flag
% Read all the commands with read access
exec=this.read_commands;
else
ind_r=ismember(varargin,this.read_commands);
exec=varargin(ind_r);
if any(~ind_r)
% Issue warnings for commands not in the command_names
warning('The following are not valid read commands:');
disp(varargin(~ind_r));
end
end
% Iterate over the commands list
for i=1:length(exec)
%Creates the correct read command
read_command=[this.CommandList.(exec{i}).command,'?'];
%Reads the property from the device and stores it in the
%correct place
res_str = query(this.Device,read_command);
if isfield(this.CommandList.(exec{i}),'str_spec')
result.(exec{i})=...
sscanf(res_str,this.CommandList.(exec{i}).str_spec);
else
%Needs to be str2num in order to treat output from e.g.
%Textronix scopes.
result.(exec{i})= str2num(res_str); %#ok<ST2NM>
end
%Assign the values to the MyInstrument properties
this.(exec{i})=result.(exec{i});
end
end
% Wrapper for readProperty that opens and closes the device
function result = readPropertyHedged(this, varargin)
this.openDevice();
try
result = this.readProperty(varargin{:});
catch
warning('Error while reading the properties:');
disp(varargin);
end
this.closeDevice();
end
%Connects to the device if it is not connected
function openDevice(this)
if ~isopen(this)
try
fopen(this.Device);
catch
% try to find and close all the devices with the same
% VISA resource name
try
instr_list=instrfind('RsrcName',this.Device.RsrcName);
fclose(instr_list);
fopen(this.Device);
warning('Multiple instrument objects of address %s exist',...
this.address);
catch
error('Could not open device')
end
end
end
end
%Closes the connection to the device
function closeDevice(this)
if isopen(this)
fclose(this.Device);
end
end
function configureDefaultVisa(this)
this.Device.OutputBufferSize = this.DEFAULT_OUT_BUFF_SIZE;
this.Device.InputBufferSize = this.DEFAULT_INP_BUFF_SIZE;
this.Device.Timeout = this.DEFAULT_TIMEOUT;
end
end
methods (Access=public)
%Triggers event for acquired data
function triggerNewData(this)
notify(this,'NewData')
end
%Checks if the connection to the device is open
function bool=isopen(this)
try
bool=strcmp(this.Device.Status, 'open');
catch
warning('Cannot verify device Status property');
bool=false;
end
end
%Adds a command to the CommandList
function addCommand(this, tag, command, varargin)
p=inputParser();
addRequired(p,'tag',@ischar);
addRequired(p,'command',@ischar);
addParameter(p,'default','placeholder');
addParameter(p,'classes',{},@iscell);
addParameter(p,'attributes',{},@iscell);
addParameter(p,'str_spec','%e',@ischar);
addParameter(p,'access','rw',@ischar);
parse(p,tag,command,varargin{:});
%Adds the command to be sent to the device
this.CommandList.(tag).command=command;
this.CommandList.(tag).access=p.Results.access;
this.CommandList.(tag).write_flag=contains(p.Results.access,'w');
this.CommandList.(tag).read_flag=contains(p.Results.access,'r');
%Adds a default value and the attributes the inputs must have
%and creates a new property in the class
if this.CommandList.(tag).write_flag
% Adds the string specifier to the list. if the format
% specifier is not given explicitly, try to infer
if ismember('str_spec',p.UsingDefaults)
this.CommandList.(tag).str_spec=...
formatSpecFromAttributes(this,p.Results.classes...
,p.Results.attributes);
elseif strcmp(p.Results.str_spec,'%b')
% b is a non-system specifier to represent the
% logical type
this.CommandList.(tag).str_spec='%i';
else
this.CommandList.(tag).str_spec=p.Results.str_spec;
end
% Adds the default value
this.CommandList.(tag).default=p.Results.default;
% Adds the attributes for the input to the command. If not
% given explicitly, infer from the format specifier
if ismember('classes',p.UsingDefaults)
[this.CommandList.(tag).classes,...
this.CommandList.(tag).attributes]=...
AttributesFromFormatSpec(this, p.Results.str_spec);
else
this.CommandList.(tag).classes=p.Results.classes;
this.CommandList.(tag).attributes=p.Results.attributes;
end
end
if (this.CommandList.(tag).read_flag &&...
~this.CommandList.(tag).write_flag)
this.CommandList.(tag).classes=p.Results.classes;
this.CommandList.(tag).attributes=p.Results.attributes;
end
% Adds a property to the class corresponding to the tag
if ~isprop(this,tag)
addprop(this,tag);
end
this.(tag)=p.Results.default;
end
%Creates inputParser using the command list
function createCommandParser(this)
%Use input parser
%Requires input of the appropriate class
p=inputParser;
p.StructExpand=0;
%Flag for whether the command should initialize the device with
%defaults
addParameter(p, 'all',false,@islogical);
for i=1:length(this.write_commands)
%Adds optional inputs for each command, with the
%appropriate default value from the command list and the
%required attributes for the command input.
tag=this.write_commands{i};
addParameter(p, tag,...
this.CommandList.(tag).default,...
@(x) validateattributes(x,...
this.CommandList.(tag).classes,...
this.CommandList.(tag).attributes));
end
this.CommandParser=p;
end
function str_spec=formatSpecFromAttributes(~,classes,attributes)
if ismember('char',classes)
str_spec='%s';
elseif ismember('logical',classes)||...
(ismember('numeric',classes)&&...
ismember('integer',attributes))
str_spec='%i';
else
%assign default value, i.e. double
str_spec='%e';
end
end
function [class,attribute]=AttributesFromFormatSpec(~, str_spec)
ind=strfind(str_spec,'%');
str_spec_letter=str_spec(ind+1);
switch str_spec_letter
case {'d','f','e','g'}
class={'numeric'};
attribute={};
case 'i'
class={'numeric'};
attribute={'integer'};
case 's'
class={'char'};
attribute={};
case 'b'
class={'logical'};
attribute={};
otherwise
class={};
attribute={};
end
end
%Close figure callback simply calls delete function for class
function closeFigure(this,~,~)
delete(this);
end
end
% Get functions
methods
function command_names=get.command_names(this)
command_names=fieldnames(this.CommandList);
end
function write_commands=get.write_commands(this)
ind_w=structfun(@(x) x.write_flag, this.CommandList);
write_commands=this.command_names(ind_w);
end
function write_commands=get.read_commands(this)
ind_r=structfun(@(x) x.read_flag, this.CommandList);
write_commands=this.command_names(ind_r);
end
function command_no=get.command_no(this)
command_no=length(this.command_names);
end
end
end
c4science · Help