Diffusion Instrument Control (FreqRINCal) Browse

MyTlb6700.m
148114c5e83cFreqRINCal

MyTlb6700.m
View Options

			% Class for communication with NewFocus TLB6700 tunable laser controllers
			% Needs UsbDllWrap.dll from Newport USB driver on Matlab path
			% Address field is ignored for this class.
			% Start instrument as MyTlb6700('','USBaddr'), where USBaddr is indicated
			% in the instrument menu. Example: MyTlb6700('','1')
			%
			% This class does not have 'Device' property but uses the communication
			% class UsbComm (which needs to be shared between multiple devices) to
			% mimic some of the standard MyInstrument operations.
			%
			% Operation of opening devices is time-consuming with Newport USB driver,
			% on the other hand multiple open devices do not interfere. So keep
			% the device open for the whole session

			classdef MyTlb6700 < MyScpiInstrument

			properties (SetAccess=protected, GetAccess=public)
			% Instance of Newport.USBComm.USB used for communication.
			% Must be shared between the devices
			UsbComm
			end

			%% Constructor and destructor
			methods (Access=public)

			function this=MyTlb6700(interface, address, varargin)
			this@MyScpiInstrument(interface, address, varargin{:});
			% Interface field is not used in this instrument, but is
			% assigned value for the purpose of information
			this.interface='usb';
			% Convert address to number
			this.address=str2double(this.address);
			end

			end

			%% Protected functions
			methods (Access=protected)
			function createCommandList(this)
			% Commands for this class do not start from ':', as the
			% protocol does not fully comply with SCPI standard

			% Output wavelength, nm
			addCommand(this, 'wavelength','SENSe:WAVElength',...
			'access','r','default',780,'fmt_spec','%e',...
			'info','Output wavelength (nm)');
			% Diode current, mA
			addCommand(this, 'current','SENSe:CURRent:DIODe',...
			'access','r','default',1,'fmt_spec','%e',...
			'info','Diode current (mA)');
			% Diode temperature, C
			addCommand(this, 'temp_diode','SENSe:TEMPerature:DIODe',...
			'access','r','default',10,'fmt_spec','%e',...
			'info','Diode temperature (C)');
			% Output power, mW
			addCommand(this, 'power','SENSe:POWer:DIODe',...
			'access','r','default',1,'fmt_spec','%e',...
			'info','Output power (mW)');

			% Wavelength setpoint, nm
			addCommand(this, 'wavelength_sp','SOURce:WAVElength',...
			'default',780,'fmt_spec','%e',...
			'info','Wavelength setpoint (nm)');
			% Constant power mode on/off
			addCommand(this, 'const_power','SOURce:CPOWer',...
			'default',true,'fmt_spec','%b',...
			'info','Constant power mode on/off');
			% Power setpoint, mW
			addCommand(this, 'power_sp','SOURce:POWer:DIODe',...
			'default',10,'fmt_spec','%e',...
			'info','Power setpoint (mW)');
			% Current setpoint, mA
			addCommand(this, 'current_sp','SOURce:CURRent:DIODe',...
			'default',100,'fmt_spec','%e',...
			'info','Current setpoint (mA)');

			% Control mode local/remote
			addCommand(this, 'control_mode','SYSTem:MCONtrol',...
			'val_list',{'LOC','REM'},...
			'default','LOC','fmt_spec','%s',...
			'info','Control local/remote');
			% Output on/off
			addCommand(this, 'enable_output','OUTPut:STATe',...
			'default',false,'fmt_spec','%b',...
			'info','on/off');
			% Wavelength track on/off
			addCommand(this, 'wavelength_track','OUTPut:TRACk',...
			'default',true,'fmt_spec','%b',...
			'info','on/off');

			% Wavelength scan related commands
			% Scan start wavelength (nm)
			addCommand(this, 'scan_start_wl','SOURce:WAVE:START',...
			'default',0,'fmt_spec','%e',...
			'info','(nm)');
			% Scan stop wavelength (nm)
			addCommand(this, 'scan_stop_wl','SOURce:WAVE:STOP',...
			'default',0,'fmt_spec','%e',...
			'info','(nm)');
			% Scan speed (nm/s)
			addCommand(this, 'scan_speed','SOURce:WAVE:SLEW:FORWard',...
			'default',0,'fmt_spec','%e',...
			'info','(nm/s)');
			% Maximum scan speed (nm/s)
			addCommand(this, 'scan_speed_max','SOURce:WAVE:MAXVEL',...
			'access','r','default',0,'fmt_spec','%e',...
			'info','(nm/s)');
			end

			end


			methods (Access=public)

			%% Overloaded methods
			% NewFocus lasers do not support visa communication, thus need to
			% overload connectDevice, writeCommand and queryCommand methods
			function connectDevice(this)
			% In this case 'interface' property is ignored and 'address' is
			% the USB address, indicated in the controller menu

			% Get the unique instance of control class for Newport driver
			this.UsbComm=MyNewportUsbComm.instance();

			end

			function openDevice(this)
			% Opening a single device is not supported by Newport Usb
			% Driver, so open all the devices of the given type
			OpenDevices(this.UsbComm.Usb, hex2num('100A'));
			end

			function bool=isopen(this)
			% There does not seem to be a quick way of checking if devices
			% are open with Newport Usb Driver.
			% On the other hand devices normally should always be open and
			% trying to re-open them is not time consuming.
			openDevice(this);
			bool=true;
			end

			function closeDevice(~)
			% Closing a single device is not supported by Newport Usb
			% driver. use CloseDevices(this.UsbComm.Usb) to close all.
			end

			function stat_list=writeCommand(this, varargin)
			% Create auxiliary variable for device communication
			% Query is used for writing as the controller always returns
			% a status string that needs to be read out
			if ~isempty(varargin)
			n_cmd=length(varargin);
			stat_list=cell(n_cmd,1);
			% Send commands one by one as sending one query seems
			% to sometimes give errors if the string is very long
			for i=1:n_cmd
			cmd = [varargin{i},';'];
			stat_list{i} = query(this.UsbComm, this.address, cmd);
			end
			end
			end

			function res_list=queryCommand(this, varargin)
			if ~isempty(varargin)
			n_cmd=length(varargin);
			res_list=cell(n_cmd,1);
			% Query commands one by one as sending one query seems
			% to sometimes give errors if the string is very long
			for i=1:n_cmd
			cmd = [varargin{i},';'];
			res_list{i} = query(this.UsbComm, this.address, cmd);
			end
			else
			res_list={};
			end
			end

			%% Laser power and scan control functions

			function stat = setMaxOutPower(this)
			openDevice(this);
			% Depending on if the laser in the constat power or current
			% mode, set value to max
			if this.const_power
			stat = query(this.UsbComm, this.address, ...
			'SOURce:POWer:DIODe MAX;');
			else
			stat = query(this.UsbComm, this.address, ...
			'SOURce:CURRent:DIODe MAX;');
			end
			end

			% Returns minimum and maximum wavelengths of the laser. There does
			% not seem to be a more direct way of doing this with TLB6700
			% other than setting and then reading the min/max values.
			function [wl_min, wl_max] = readMinMaxWavelength(this)
			tmp=this.scan_start_wl;
			openDevice(this);
			% Read min wavelength of the laser
			writeCommand(this, 'SOURce:WAVE:START MIN');
			resp=queryCommand(this, 'SOURce:WAVE:START?');
			wl_min=str2double(resp{1});
			% Read max wavelength of the laser
			writeCommand(this, 'SOURce:WAVE:START MAX');
			resp=queryCommand(this, 'SOURce:WAVE:START?');
			wl_max=str2double(resp{1});
			% Return scan start to its original value
			writeProperty(this, 'scan_start_wl', tmp);
			end

			function configSingleScan(this)
			openDevice(this);
			% Configure:
			% Do not switch the laser off during the backward scan,
			% Perform a signle scan,
			% Return at maximum speed
			writeCommand(this,'SOURce:WAVE:SCANCFG 0',...
			'SOURce:WAVE:DESSCANS 1',...
			'SOURce:WAVE:SLEW:RETurn MAX');
			end

			function startScan(this)
			openDevice(this);
			writeCommand(this,'OUTPut:SCAN:START');
			end

			function stopScan(this)
			openDevice(this);
			writeCommand(this,'OUTPut:SCAN:STOP');
			end
			end
			end

rINSTCONTROL/@MyTlb6700/MyTlb6700.m148114c5e83cFreqRINCal

MyTlb6700.mView Options

rINSTCONTROL/@MyTlb6700/MyTlb6700.m
148114c5e83cFreqRINCal

MyTlb6700.m
View Options