Homec4science
Diffusion Instrument Control (MyFit-data-scaling) Browse

rINSTCONTROL/@MyTpg/MyTpg.m
7f9ed3923186MyFit-data-scaling

Last Change
Raw File

MyTpg.m
View Options

This document is not UTF8. It was detected as ISO-8859-1 (Latin 1) and converted to UTF8 for display.
% Class for communication with Pfeiffer TPG single and dual pressure gauge
% controllers.
% Do not use visa communication objects with this instrument
% Tested with TPG 262 and 362.
classdef MyTpg < MyInstrument
properties
Lg % MyLogger object
end
properties (Constant=true)
% Named constants for communication
ETX = char(3); % end of text
CR = char(13); % carriage return \r
LF = char(10); %#ok<CHARTEN> % line feed \n
ENQ = char(5); % enquiry
ACK = char(6); % acknowledge
NAK = char(21); % negative acknowledge
end
properties (SetAccess=protected, GetAccess=public)
pressure1 = 0; % numeric values of pressure
pressure2 = 0;
stat1;
stat2;
gauge_id1;
gauge_id2;
pressure_unit = '';
end
properties (Dependent=true)
pressure_str1; % display string with measurement unit
pressure_str2;
end
methods (Access=public)
%% Constructor and destructor
function this = MyTpg(interface, address, varargin)
this@MyInstrument(interface, address, varargin{:});
% Create MyLogger object and configure it to measure pressure
initLogger(this);
% Configure trace to store pressure vs time recorded by Logger
this.Trace.name_x='Time';
this.Trace.unit_x='s';
end
% Delete method that cleans up logger. Superclass delete method as
% usual is executed after this one.
function delete(this)
% Stop and delete logger. Destructor should never throw errors.
try
stop(this.Lg)
delete(this.Lg);
catch
end
end
%% Communication commands
% read pressure from a single channel or both channels at a time
function p_arr = readPressure(this)
query(this.Device,['PRX',this.CR,this.LF]);
str = query(this.Device,this.ENQ);
% Extract pressure and gauge status from reading.
arr = sscanf(str,'%i,%e,%i,%e');
p_arr=transpose(arr(2:2:end));
this.pressure1 = p_arr(1);
this.pressure2 = p_arr(2);
% Status codes:
% 0 –> Measurement data okay
% 1 –> Underrange
% 2 –> Overrange
% 3 –> Sensor error
% 4 –> Sensor off (IKR, PKR, IMR, PBR)
% 5 –> No sensor (output: 5,2.0000E-2 [hPa])
% 6 –> Identification error
this.stat1 = gaugeStatusFromCode(this, arr(1));
this.stat2 = gaugeStatusFromCode(this, arr(3));
% Trigger event notification
triggerPropertyRead(this);
end
function pu = readPressureUnit(this)
query(this.Device,['UNI',this.CR,this.LF]);
str = query(this.Device,this.ENQ);
% Pressure units correspondence table:
% 0 –> mbar/bar
% 1 –> Torr
% 2 –> Pascal
% 3 –> Micron
% 4 –> hPascal (default)
% 5 –> Volt
pu_code = sscanf(str,'%i');
pu = pressureUnitFromCode(this, pu_code);
this.pressure_unit = pu;
% Trigger event notification
triggerPropertyRead(this);
end
function id_list = readGaugeId(this)
query(this.Device,['TID',this.CR,this.LF]);
str = query(this.Device,this.ENQ);
id_list = deblank(strsplit(str,{','}));
this.gauge_id1 = id_list{1};
this.gauge_id2 = id_list{2};
% Trigger event notification
triggerPropertyRead(this);
end
function p_arr = readAllHedged(this)
was_open = isopen(this);
if ~was_open
openDevice(this);
end
try
p_arr = readPressure(this);
readPressureUnit(this);
readGaugeId(this);
catch
p_arr = [0,0];
warning('Error while communicating with gauge controller')
end
% Leave device in the state it was in the beginning
if ~was_open
closeDevice(this);
end
end
function code_list = turnGauge(this)
query(this.Device,['SEN',char(1,1),this.CR,this.LF]);
str = query(this.Device,this.ENQ);
code_list = deblank(strsplit(str,{','}));
end
%% Overloading MyInstrument functions
% Implement instrument-specific readHeader function
function Hdr=readHeader(this)
Hdr=readHeader@MyInstrument(this);
% Hdr should contain single field
fn=Hdr.field_names{1};
readAllHedged(this);
addParam(Hdr, fn, 'pressure_unit', this.pressure_unit);
addParam(Hdr, fn, 'pressure1', this.pressure1);
addParam(Hdr, fn, 'pressure2', this.pressure2);
addParam(Hdr, fn, 'stat1', this.stat1);
addParam(Hdr, fn, 'stat2', this.stat2);
addParam(Hdr, fn, 'gauge_id1', this.gauge_id1);
addParam(Hdr, fn, 'gauge_id2', this.gauge_id2);
end
% Attempt communication and identification of the device
function [str, msg]=idn(this)
was_open=isopen(this);
try
openDevice(this);
query(this.Device,['AYT',this.CR,this.LF]);
[str,~,msg]=query(this.Device,this.ENQ);
catch ErrorMessage
str='';
msg=ErrorMessage.message;
end
% Remove carriage return and new line symbols from the string
newline_smb={sprintf('\n'),sprintf('\r')}; %#ok<SPRINTFN>
str=replace(str, newline_smb,' ');
this.idn_str=str;
% Leave device in the state it was in the beginning
if ~was_open
try
closeDevice(this);
catch
end
end
end
%% Logging functionality
% Init or reset logger
function initLogger(this, varargin)
if isa(this.Lg, 'MyLogger')
delete(this.Lg);
end
this.Lg = MyLogger('MeasFcn', @()readAllHedged(this), ...
varargin{:});
if isempty(this.Lg.Record.data_headers) &&...
(~isempty(this.pressure_unit))
pu = this.pressure_unit;
this.Lg.Record.data_headers=...
{['P ch1 (',pu,')'],['P ch2 (',pu,')']};
end
end
% Trigger NewData event that sends trace to Daq
function transferTrace(this, n_ch)
if nargin==1
% Channel number is 1 if not specified explicitly
n_ch=1;
end
if isa(this.Lg, 'MyLogger')&&isvalid(this.Lg)
time_arr=this.Lg.Record.timestamps_num;
% Shift time origin to 0
this.Trace.x=time_arr-time_arr(1);
this.Trace.y=this.Lg.Record.data(:,n_ch);
this.Trace.name_y=sprintf('P Ch%i',n_ch);
this.Trace.unit_y=this.pressure_unit;
triggerNewData(this);
else
warning(['Cannot transfer trace from the logger, ',...
'missing or invalid MyLogger object.'])
end
end
%% Functions for convertion between numerical codes and strings
% Convert numerical code for gauge status to a string
function str = gaugeStatusFromCode(~, code)
switch int8(code)
case 0
str = 'Measurement data ok';
case 1
str = 'Underrange';
case 2
str = 'Overrange';
case 3
str = 'Sensor error';
case 4
str = 'Sensor off';
case 5
str = 'No sensor';
case 6
str = 'Identification error';
otherwise
str = '';
warning('Unknown gauge status code %i', code);
end
end
% Convert numerical code for pressure unit to a string
function str = pressureUnitFromCode(~, code)
switch int8(code)
case 0
str = 'mbar';
case 1
str = 'Torr';
case 2
str = 'Pa';
case 3
str = 'Micron';
case 4
str = 'hPa';
case 5
str = 'Volt';
otherwise
str = '';
warning('unknown pressure unit, code=%i',pu_num)
end
end
end
%% Get functions
methods
function p_str = get.pressure_str1(this)
p_str = sprintf('%.2e %s', this.pressure1, this.pressure_unit);
end
function p_str = get.pressure_str2(this)
p_str = sprintf('%.2e %s', this.pressure2, this.pressure_unit);
end
end
end
c4science · Help