Diffusion Instrument Control (TekRSA-Freq-vs-Time) Browse

MyDpo.m
9421305248f8TekRSA-Freq-vs-Time

MyDpo.m
View Options

			% Class for controlling 4-channel Tektronix DPO scopes.
			% Tested with DPO4034, DPO3034
			classdef MyDpo < MyScpiInstrument
			properties (SetAccess=protected, GetAccess=public)
			% List of the physical knobs, which can be rotated programmatically
			knob_list = {'GPKNOB1','GPKNOB2','HORZPos','HORZScale',...
			'TRIGLevel','PANKNOB1','VERTPOS','VERTSCALE','ZOOM'};
			end

			properties (Constant=true)
			N_CHANNELS = 4; % number of channels
			end

			methods (Access=public)
			function this=MyDpo(interface, address, varargin)
			this@MyScpiInstrument(interface, address, varargin{:});
			% 2e7 is the maximum trace size of DPO4034-3034
			%(10 mln point of 2-byte integers)
			this.Device.InputBufferSize = 2.1e7; %byte
			this.Trace.name_x='Time';
			this.Trace.name_y='Voltage';
			end

			function readTrace(this)
			%set data format to be signed integer, reversed byte order
			fprintf(this.Device,':DATA:ENCDG SRIbinary');
			%2 bytes per measurement point
			fprintf(this.Device,':DATA:WIDTH 2');
			% read the entire trace
			fprintf(this.Device,':DATA:START 1;STOP %i',this.point_no);
			fprintf(this.Device,':CURVE?');
			y_data = int16(binblockread(this.Device,'int16'));

			% Reading the relevant parameters from the scope
			readProperty(this,'unit_y','unit_x',...
			'step_x','step_y','x_zero');

			% Calculating the y data
			y = double(y_data)*this.step_y;
			n_points=length(y);
			% Calculating the x axis
			x = linspace(this.x_zero,...
			this.x_zero+this.step_x*(n_points-1),n_points);

			this.Trace.x = x;
			this.Trace.y = y;
			% Discard "" when assiging the Trace labels
			this.Trace.unit_x = this.unit_x(2:end-1);
			this.Trace.unit_y = this.unit_y(2:end-1);
			triggerNewData(this);
			end

			function acquireContinuous(this)
			openDevice(this);
			fprintf(this.Device,...
			':ACQuire:STOPAfter RUNSTop;:ACQuire:STATE ON');
			closeDevice(this);
			end

			function acquireSingle(this)
			openDevice(this);
			fprintf(this.Device,...
			':ACQuire:STOPAfter SEQuence;:ACQuire:STATE ON');
			closeDevice(this);
			end

			function turnKnob(this,knob,nturns)
			openDevice(this);
			fprintf(this.Device, sprintf(':FPAnel:TURN %s,%i',knob,nturns));
			closeDevice(this);
			end
			end

			%% Protected functions
			methods (Access=protected)
			function createCommandList(this)
			addCommand(this,'channel',':DATa:SOUrce',...
			'default',1,...
			'str_spec','CH%i',...
			'info','Channel from which the data is transferred');
			addCommand(this, 'ctrl_channel', ':SELect:CONTROl',...
			'default',1,...
			'str_spec','CH%i',...
			'info','Channel currently selected in the scope display');
			% units and scale for x and y waveform data
			addCommand(this,'unit_x',':WFMOutpre:XUNit','access','r',...
			'classes',{'char'});
			addCommand(this,'unit_y',':WFMOutpre:YUNit','access','r',...
			'classes',{'char'});
			addCommand(this,'step_y',':WFMOutpre:YMUlt','access','r',...
			'classes',{'numeric'});
			addCommand(this,'step_x',':WFMOutpre:XINcr','access','r',...
			'classes',{'numeric'});
			addCommand(this,'x_zero',':WFMOutpre:XZEro','access','r',...
			'classes',{'numeric'});
			addCommand(this, 'point_no',':HORizontal:RECOrdlength',...
			'default', 100000,...
			'val_list', {1000, 10000, 100000, 1000000, 10000000},...
			'str_spec','%i',...
			'info','Numbers of points in the scope trace');
			% time scale in s per div
			addCommand(this, 'time_scale',':HORizontal:SCAle',...
			'default',10E-3,...
			'str_spec','%e',...
			'info','Time scale (s/division)');
			% trigger level
			addCommand(this, 'trig_lev', ':TRIGger:A:LEVel',...
			'default',1,...
			'str_spec','%e');
			% trigger slope
			addCommand(this, 'trig_slope', ':TRIGger:A:EDGE:SLOpe',...
			'default', 'RISe', 'val_list',{'RISe','RIS','FALL'},...
			'str_spec','%s');
			% trigger source
			addCommand(this, 'trig_source', ':TRIGger:A:EDGE:SOUrce',...
			'default', 'AUX', 'val_list', {'CH1','CH2','CH3','CH4',...
			'AUX','EXT','LINE'},...
			'str_spec','%s');
			% trigger mode
			addCommand(this, 'trig_mode', ':TRIGger:A:MODe',...
			'default', 'AUTO', 'val_list',{'AUTO','NORMal','NORM'},...
			'str_spec','%s');
			% state of the data acquisition by the scope
			addCommand(this, 'acq_state', ':ACQuire:STATE',...
			'default',true,...
			'str_spec','%b',...
			'info','State of data acquisition by the scope');
			% acquisition mode
			addCommand(this, 'acq_mode', ':ACQuire:MODe',...
			'default', 'HIR', 'val_list',{'SAM','PEAK','HIR','AVE',...
			'ENV','SAMple','PEAKdetect','HIRes','AVErage','ENVelope'},...
			'str_spec','%s',...
			'info',['Acquisition mode: sample, peak detect, ',...
			'high resolution, average or envelope']);

			% Parametric commands
			for i = 1:this.N_CHANNELS
			i_str = num2str(i);
			% coupling, AC, DC or GND
			addCommand(this,...
			['cpl',i_str],[':CH',i_str,':COUP'],...
			'default','DC', 'val_list', {'AC','DC','GND'},...
			'str_spec','%s',...
			'info','Channel coupling: AC, DC or GND');
			% impedances, 1MOhm or 50 Ohm
			addCommand(this,...
			['imp',i_str],[':CH',i_str,':IMPedance'],...
			'default','MEG', 'val_list', {'FIFty','FIF','MEG'},...
			'str_spec','%s',...
			'info','Channel impedance: 1 MOhm or 50 Ohm');
			% offset
			addCommand(this,...
			['offset',i_str],[':CH',i_str,':OFFSet'],'default',0,...
			'str_spec','%e');
			% scale, V/Div
			addCommand(this,...
			['scale',i_str],[':CH',i_str,':SCAle'],'default',1,...
			'str_spec','%e',...
			'info','Channel y scale (V/division)');
			% channel enabled
			addCommand(this,...
			['enable',i_str],[':SEL:CH',i_str],'default',true,...
			'str_spec','%b',...
			'info','Channel enabled');
			end
			end
			end
			end

rINSTCONTROL/@MyDpo/MyDpo.m9421305248f8TekRSA-Freq-vs-Time

MyDpo.mView Options

rINSTCONTROL/@MyDpo/MyDpo.m
9421305248f8TekRSA-Freq-vs-Time

MyDpo.m
View Options