Homec4science
Diffusion Instrument Control (TekRSA-Freq-vs-Time) Browse

rINSTCONTROL/@MyDpo/MyDpo.m
a0b6d8dfdf6dTekRSA-Freq-vs-Time

Last Change
Raw File

MyDpo.m
View Options

% Class for controlling 4-channel Tektronix DPO scopes.
% Tested with DPO4034, DPO3034
classdef MyDpo < MyScpiInstrument
properties (SetAccess=protected, GetAccess=public)
% List of the physical knobs, which can be rotated programmatically
knob_list = {'GPKNOB1','GPKNOB2','HORZPos','HORZScale',...
'TRIGLevel','PANKNOB1','VERTPOS','VERTSCALE','ZOOM'};
end
properties (Constant=true)
N_CHANNELS = 4; % number of channels
end
methods (Access=public)
function this=MyDpo(interface, address, varargin)
this@MyScpiInstrument(interface, address, varargin{:});
% 2e7 is the maximum trace size of DPO4034-3034
%(10 mln point of 2-byte integers)
this.Device.InputBufferSize = 2.1e7; %byte
this.Trace.name_x='Time';
this.Trace.name_y='Voltage';
end
function readTrace(this)
%set data format to be signed integer, reversed byte order
fprintf(this.Device,':DATA:ENCDG SRIbinary');
%2 bytes per measurement point
fprintf(this.Device,':DATA:WIDTH 2');
% read the entire trace
fprintf(this.Device,':DATA:START 1;STOP %i',this.point_no);
fprintf(this.Device,':CURVE?');
y_data = int16(binblockread(this.Device,'int16'));
% Reading the relevant parameters from the scope
readProperty(this,'unit_y','unit_x',...
'step_x','step_y','x_zero','y_zero','y_offset');
% Calculating the y data
y = (double(y_data)-this.y_offset)*this.step_y+this.y_zero;
n_points=length(y);
% Calculating the x axis
x = linspace(this.x_zero,...
this.x_zero+this.step_x*(n_points-1),n_points);
this.Trace.x = x;
this.Trace.y = y;
% Discard "" when assiging the Trace labels
this.Trace.unit_x = this.unit_x(2:end-1);
this.Trace.unit_y = this.unit_y(2:end-1);
triggerNewData(this);
end
function acquireContinuous(this)
openDevice(this);
fprintf(this.Device,...
':ACQuire:STOPAfter RUNSTop;:ACQuire:STATE ON');
closeDevice(this);
end
function acquireSingle(this)
openDevice(this);
fprintf(this.Device,...
':ACQuire:STOPAfter SEQuence;:ACQuire:STATE ON');
closeDevice(this);
end
function turnKnob(this,knob,nturns)
openDevice(this);
fprintf(this.Device, sprintf(':FPAnel:TURN %s,%i',knob,nturns));
closeDevice(this);
end
end
%% Protected functions
methods (Access=protected)
function createCommandList(this)
addCommand(this,'channel',':DATa:SOUrce',...
'default',1,...
'fmt_spec','CH%i',...
'info','Channel from which the data is transferred');
addCommand(this, 'ctrl_channel', ':SELect:CONTROl',...
'default',1,...
'fmt_spec','CH%i',...
'info','Channel currently selected in the scope display');
% units and scale for x and y waveform data
addCommand(this,'unit_x',':WFMOutpre:XUNit','access','r',...
'classes',{'char'});
addCommand(this,'unit_y',':WFMOutpre:YUNit','access','r',...
'classes',{'char'});
addCommand(this,'step_y',':WFMOutpre:YMUlt','access','r',...
'classes',{'numeric'});
addCommand(this,'step_x',':WFMOutpre:XINcr','access','r',...
'classes',{'numeric'});
addCommand(this,'x_zero',':WFMOutpre:XZEro','access','r',...
'classes',{'numeric'});
addCommand(this,'y_zero',':WFMOutpre:YZEro','access','r',...
'classes',{'numeric'});
addCommand(this,'y_offset',':WFMOutpre:YOFf','access','r',...
'classes',{'numeric'});
addCommand(this, 'point_no',':HORizontal:RECOrdlength',...
'default', 100000,...
'val_list', {1000, 10000, 100000, 1000000, 10000000},...
'fmt_spec','%i',...
'info','Numbers of points in the scope trace');
% time scale in s per div
addCommand(this, 'time_scale',':HORizontal:SCAle',...
'default',10E-3,...
'fmt_spec','%e',...
'info','Time scale (s/div)');
% trigger level
addCommand(this, 'trig_lev', ':TRIGger:A:LEVel',...
'default',1,...
'fmt_spec','%e');
% trigger slope
addCommand(this, 'trig_slope', ':TRIGger:A:EDGE:SLOpe',...
'default', 'RISe', 'val_list',{'RISe','RIS','FALL'},...
'fmt_spec','%s');
% trigger source
addCommand(this, 'trig_source', ':TRIGger:A:EDGE:SOUrce',...
'default', 'AUX', 'val_list', {'CH1','CH2','CH3','CH4',...
'AUX','EXT','LINE'},...
'fmt_spec','%s');
% trigger mode
addCommand(this, 'trig_mode', ':TRIGger:A:MODe',...
'default', 'AUTO', 'val_list',{'AUTO','NORMal','NORM'},...
'fmt_spec','%s');
% state of the data acquisition by the scope
addCommand(this, 'acq_state', ':ACQuire:STATE',...
'default',true,...
'fmt_spec','%b',...
'info','State of data acquisition by the scope');
% acquisition mode
addCommand(this, 'acq_mode', ':ACQuire:MODe',...
'default', 'HIR', 'val_list',{'SAM','PEAK','HIR','AVE',...
'ENV','SAMple','PEAKdetect','HIRes','AVErage','ENVelope'},...
'fmt_spec','%s',...
'info',['Acquisition mode: sample, peak detect, ',...
'high resolution, average or envelope']);
% Parametric commands
for i = 1:this.N_CHANNELS
i_str = num2str(i);
% coupling, AC, DC or GND
addCommand(this,...
['cpl',i_str],[':CH',i_str,':COUP'],...
'default','DC', 'val_list', {'AC','DC','GND'},...
'fmt_spec','%s',...
'info','Channel coupling: AC, DC or GND');
% impedances, 1MOhm or 50 Ohm
addCommand(this,...
['imp',i_str],[':CH',i_str,':IMPedance'],...
'default','MEG', 'val_list', {'FIFty','FIF','MEG'},...
'fmt_spec','%s',...
'info','Channel impedance: 1 MOhm or 50 Ohm');
% offset
addCommand(this,...
['offset',i_str],[':CH',i_str,':OFFSet'],'default',0,...
'fmt_spec','%e',...
'info','(V)');
% scale, V/Div
addCommand(this,...
['scale',i_str],[':CH',i_str,':SCAle'],'default',1,...
'fmt_spec','%e',...
'info','Channel y scale (V/div)');
% channel enabled
addCommand(this,...
['enable',i_str],[':SEL:CH',i_str],'default',true,...
'fmt_spec','%b',...
'info','Channel enabled');
end
end
end
end
c4science · Help