Diffusion Instrument Control (TekRSA-Freq-vs-Time) Browse

MyDpo.m
f7e8be445b9aTekRSA-Freq-vs-Time

MyDpo.m
View Options

			% Class for controlling Tektronix DPO scopes.
			% Tested with DPO4034, DPO3034
			classdef MyDpo <MyInstrument
			properties (SetAccess=protected, GetAccess=public)
			% List of the physical knobs, which can be rotated programmatically
			knob_list = {'GPKNOB1','GPKNOB2','HORZPos','HORZScale',...
			'TRIGLevel','PANKNOB1','VERTPOS','VERTSCALE','ZOOM'};
			end

			methods (Access=public)
			function this=MyDpo(interface, address, varargin)
			this@MyInstrument(interface, address, varargin{:});
			createCommandList(this);
			createCommandParser(this);
			connectDevice(this, interface, address);
			this.Device.InputBufferSize = 1e8; %byte
			this.Trace.name_x='Time';
			this.Trace.name_y='Voltage';
			end

			function readTrace(this)
			%set data format to be signed integer, reversed byte order
			fprintf(this.Device,'DATA:ENCDG SRIbinary');
			%2 bytes per measurement point
			fprintf(this.Device,'DATA:WIDTH 2');
			% read the entire trace
			fprintf(this.Device,'DATA:START 1;STOP %i;',this.point_no);
			fprintf(this.Device,'CURVE?');
			y_data = int16(binblockread(this.Device,'int16'));

			% Reading the relevant parameters from the scope
			readProperty(this,'unit_y','unit_x',...
			'step_x','step_y','x_zero');

			% Calculating the y data
			y = double(y_data)*this.step_y;
			n_points=length(y);
			% Calculating the x axis
			x = linspace(this.x_zero,...
			this.x_zero+this.step_x*(n_points-1),n_points);

			this.Trace.x = x;
			this.Trace.y = y;
			% Discard "" when assiging the Trace labels
			this.Trace.unit_x = this.unit_x(2:end-1);
			this.Trace.unit_y = this.unit_y(2:end-1);
			triggerNewData(this);
			end

			function acquireContinuous(this)
			openDevice(this);
			fprintf(this.Device,...
			'ACQuire:STOPAfter RUNSTop;:ACQuire:STATE ON');
			closeDevice(this);
			end

			function acquireSingle(this)
			openDevice(this);
			fprintf(this.Device,...
			'ACQuire:STOPAfter SEQuence;:ACQuire:STATE ON');
			closeDevice(this);
			end

			function turnKnob(this,knob,nturns)
			openDevice(this);
			fprintf(this.Device, sprintf('FPAnel:TURN %s,%i',knob,nturns));
			closeDevice(this);
			end
			end

			methods (Access=private)
			function createCommandList(this)
			% channel from which the data is transferred
			addCommand(this,'channel','DATa:SOUrce','default',1,...
			'str_spec','CH%i');
			% currently selected in the scope display channel
			addCommand(this, 'ctrl_channel', 'SELect:CONTROl',...
			'default',1, 'str_spec','CH%i');
			% units and scale for x and y waveform data
			addCommand(this,'unit_x','WFMOutpre:XUNit','access','r',...
			'classes',{'char'});
			addCommand(this,'unit_y','WFMOutpre:YUNit','access','r',...
			'classes',{'char'});
			addCommand(this,'step_y','WFMOutpre:YMUlt','access','r',...
			'classes',{'numeric'});
			addCommand(this,'step_x','WFMOutpre:XINcr','access','r',...
			'classes',{'numeric'});
			addCommand(this,'x_zero','WFMOutpre:XZEro','access','r',...
			'classes',{'numeric'});
			% numbers of points
			addCommand(this, 'point_no','HORizontal:RECOrdlength',...
			'default', 100000,...
			'val_list', {1000, 10000, 100000, 1000000, 10000000},...
			'str_spec','%i');
			% time scale in s per div
			addCommand(this, 'time_scale','HORizontal:SCAle',...
			'default',10E-3,...
			'str_spec','%e');
			% trigger level
			addCommand(this, 'trig_lev', 'TRIGger:A:LEVel',...
			'default',1,...
			'str_spec','%e');
			% trigger slope
			addCommand(this, 'trig_slope', 'TRIGger:A:EDGE:SLOpe',...
			'default', 'RISe', 'val_list',{'RISe','RIS','FALL'},...
			'str_spec','%s');
			% trigger source
			addCommand(this, 'trig_source', 'TRIGger:A:EDGE:SOUrce',...
			'default', 'AUX', 'val_list', {'CH1','CH2','CH3','CH4',...
			'EXT','LINE','AUX'},...
			'str_spec','%s');
			% trigger mode
			addCommand(this, 'trig_mode', 'TRIGger:A:MODe',...
			'default', 'AUTO', 'val_list',{'AUTO','NORMal','NORM'},...
			'str_spec','%s');
			% state of the data acquisition by the scope
			addCommand(this, 'acq_state', 'ACQuire:STATE',...
			'default',true, 'str_spec','%b');

			% Parametric commands
			for i = 1:4
			% coupling, AC, DC or GND
			i_str = num2str(i);
			addCommand(this,...
			['cpl',i_str],['CH',i_str,':COUP'],...
			'default','DC', 'val_list', {'AC','DC','GND'},...
			'str_spec','%s');
			% impedances, 1MOhm or 50 Ohm
			addCommand(this,...
			['imp',i_str],['CH',i_str,':IMPedance'],...
			'default','MEG', 'val_list', {'FIFty','FIF','MEG'},...
			'str_spec','%s');
			% offset
			addCommand(this,...
			['offset',i_str],['CH',i_str,':OFFSet'],'default',0,...
			'str_spec','%e');
			% scale, V/Div
			addCommand(this,...
			['scale',i_str],['CH',i_str,':SCAle'],'default',1,...
			'str_spec','%e');
			% channel enabled
			addCommand(this,...
			['enable',i_str],['SEL:CH',i_str],'default',true,...
			'str_spec','%b');
			end
			end
			end
			end

rINSTCONTROL/@MyDpo/MyDpo.mf7e8be445b9aTekRSA-Freq-vs-Time

MyDpo.mView Options

rINSTCONTROL/@MyDpo/MyDpo.m
f7e8be445b9aTekRSA-Freq-vs-Time

MyDpo.m
View Options