Homec4science
Diffusion Instrument Control (TekRSA-Freq-vs-Time) Browse

rINSTCONTROL/Instrument classes/@MyPfeifferTpg/MyPfeifferTpg.m
5791493f8e7eTekRSA-Freq-vs-Time

Last Change
Raw File

MyPfeifferTpg.m
View Options

This document is not UTF8. It was detected as ISO-8859-1 (Latin 1) and converted to UTF8 for display.
% Class for communication with Pfeiffer TPG single and dual pressure gauge
% controllers.
% Use 'serial' communication objects instead of 'visa' with this instrument
% Tested with TPG 262 and 362.
classdef MyPfeifferTpg < MyInstrument & MyCommCont & MyGuiCont
properties (Constant, Access = protected)
% Named constants for communication
ETX = char(3); % end of text
CR = char(13); % carriage return \r
LF = char(10); %#ok<CHARTEN> line feed \n
ENQ = char(5); % enquiry
ACK = char(6); % acknowledge
NAK = char(21); % negative acknowledge
end
properties (SetAccess = protected, GetAccess = public, SetObservable)
% Last measurement status
gauge_stat = {'', ''};
end
methods (Access = public)
function this = MyPfeifferTpg(varargin)
P = MyClassParser(this);
processInputs(P, this, varargin{:});
connect(this);
createCommandList(this);
end
% read pressure from a single channel or both channels at a time
function p_arr = readPressure(this)
queryString(this, ['PRX', this.CR, this.LF]);
str = queryString(this, this.ENQ);
% Extract pressure and gauge status from reading.
arr = sscanf(str,'%i,%e,%i,%e');
p_arr = transpose(arr(2:2:end));
% Status codes:
% 0 –> Measurement data okay
% 1 –> Underrange
% 2 –> Overrange
% 3 –> Sensor error
% 4 –> Sensor off (IKR, PKR, IMR, PBR)
% 5 –> No sensor (output: 5,2.0000E-2 [hPa])
% 6 –> Identification error
this.gauge_stat = {gaugeStatusFromCode(this, arr(1)), ...
gaugeStatusFromCode(this, arr(3))};
end
function pu = readPressureUnit(this)
queryString(this, ['UNI',this.CR,this.LF]);
str = queryString(this, this.ENQ);
% Pressure units correspondence table:
% 0 –> mbar/bar
% 1 –> Torr
% 2 –> Pascal
% 3 –> Micron
% 4 –> hPascal (default)
% 5 –> Volt
pu_code = sscanf(str,'%i');
pu = pressureUnitFromCode(this, pu_code);
end
function id_list = readGaugeId(this)
queryString(this, ['TID',this.CR,this.LF]);
str = queryString(this, this.ENQ);
id_list = deblank(strsplit(str,{','}));
end
function code_list = turnGauge(this)
queryString(this, ['SEN',char(1,1),this.CR,this.LF]);
str = queryString(this, this.ENQ);
code_list = deblank(strsplit(str,{','}));
end
% Attempt communication and identification of the device
function str = idn(this)
queryString(this, ['AYT', this.CR, this.LF]);
str = queryString(this, this.ENQ);
this.idn_str = toSingleLine(str);
end
% Create pressure logger
function Lg = createLogger(this, varargin)
function p = MeasPressure()
% Sync the class properties which also will tirgger an
% update of all the guis to which the instrument is linked
sync(this);
p = this.pressure;
end
Lg = MyLogger(varargin{:}, 'MeasFcn', @MeasPressure);
pu = this.pressure_unit;
if isempty(Lg.Record.data_headers) && ~isempty(pu)
Lg.Record.data_headers = ...
{['P ch1 (' pu ')'], ['P ch2 (' pu ')']};
end
end
end
methods (Access = protected)
function createCommandList(this)
addCommand(this, 'pressure', ...
'readFcn', @this.readPressure, ...
'default', [0, 0]);
addCommand(this, 'pressure_unit', ...
'readFcn', @this.readPressureUnit, ...
'default', 'mBar');
addCommand(this, 'gauge_id', ...
'readFcn', @this.readGaugeId, ...
'default', {'', ''});
end
function createMetadata(this)
createMetadata@MyInstrument(this);
addObjProp(this.Metadata, this, 'gauge_stat', ...
'comment', 'Last measurement status');
end
% Convert numerical code for gauge status to a string
function str = gaugeStatusFromCode(~, code)
switch int8(code)
case 0
str = 'Measurement data ok';
case 1
str = 'Underrange';
case 2
str = 'Overrange';
case 3
str = 'Sensor error';
case 4
str = 'Sensor off';
case 5
str = 'No sensor';
case 6
str = 'Identification error';
otherwise
str = '';
warning('Unknown gauge status code %i', code);
end
end
% Convert numerical code for pressure unit to a string
function str = pressureUnitFromCode(~, code)
switch int8(code)
case 0
str = 'mBar';
case 1
str = 'Torr';
case 2
str = 'Pa';
case 3
str = 'Micron';
case 4
str = 'hPa';
case 5
str = 'Volt';
otherwise
str = '';
warning('unknown pressure unit, code=%i',pu_num)
end
end
end
end
c4science · Help