Diffusion Instrument Control (Toptica-laser-control-class) Browse

MyNa.m
b36764d01027Toptica-laser-control…

MyNa.m
View Options

			% The class for communication with Agilent E5061B Network Analyzer
			classdef MyNa < MyScpiInstrument

			properties(Access=public)
			Trace1
			Trace2

			transf_n=1; % trace that triggers NewData event
			end

			properties (SetAccess=protected, GetAccess=public)
			active_trace = -1; % manipulating with active traces seems unavoidable
			% for selecting the data format. -1 stands for unknown

			% data formats for the traces 1-2, options:
			% 'PHAS', 'SLIN', 'SLOG', 'SCOM', 'SMIT', 'SADM', 'MLOG', 'MLIN',
			%'PLIN', 'PLOG', 'POL'
			form1 = 'MLOG';
			form2 = 'PHAS';
			end

			methods
			function this=MyNa(interface, address, varargin)
			this@MyScpiInstrument(interface, address, varargin{:});
			this.Trace1 = MyTrace();
			this.Trace2 = MyTrace();
			this.Trace1.unit_x = 'Hz';
			this.Trace1.name_x = 'Frequency';
			this.Trace2.unit_x = 'Hz';
			this.Trace2.name_x = 'Frequency';
			end

			% Generate a new data event with header collection suppressed
			function transferTrace(this, n_trace)
			trace_tag = sprintf('Trace%i', n_trace);
			% Assign either Trace1 or 2 to Trace while keeping the metadata
			this.(trace_tag).MeasHeaders=copy(this.Trace.MeasHeaders);
			this.Trace=copy(this.(trace_tag));

			triggerNewData(this,'no_new_header',true);
			end

			function data = readTrace(this, n_trace)
			writeActiveTrace(this, n_trace);
			freq_str = strsplit(query(this.Device,':SENS1:FREQ:DATA?'),',');
			data_str = strsplit(query(this.Device,':CALC1:DATA:FDAT?'),',');
			data = struct();
			data.x = str2double(freq_str);
			% In the returned string there is in general 2 values for each
			% frequency point. In the Smith data format this can be used to
			% transfer magnitude and phase of the signal in one trace. With
			% MLOG, MLIN and PHAS format settings every 2-nd element should
			% be 0
			data.y1 = str2double(data_str(1:2:end));
			data.y2 = str2double(data_str(2:2:end));

			% set the Trace properties
			trace_tag = sprintf('Trace%i', n_trace);
			this.(trace_tag).x = data.x;
			this.(trace_tag).y = data.y1;

			if this.transf_n==n_trace
			this.Trace=copy(this.(trace_tag));
			triggerNewData(this);
			end
			end

			function writeActiveTrace(this, n_trace)
			fprintf(this.Device, sprintf(':CALC1:PAR%i:SEL',n_trace));
			this.active_trace = n_trace;
			end

			function writeTraceFormat(this, n_trace, fmt)
			this.writeActiveTrace(n_trace);
			n_str = num2str(n_trace);
			this.(['form',n_str]) = fmt;
			fprintf(this.Device, sprintf(':CALC1:FORM %s', fmt));
			end

			function singleSweep(this)
			openDevice(this);
			writeProperty(this,'cont_trig', true);
			% Set the triger source to remote control
			writeProperty(this,'trig_source', 'BUS');
			% Start a sweep cycle
			fprintf(this.Device,':TRIG:SING');
			% Wait for the sweep to finish (for the query to return 1)
			query(this.Device,'*OPC?');
			closeDevice(this);
			end

			function startContSweep(this)
			openDevice(this);
			writeProperty(this,'cont_trig', true);
			% Set the triger source to be internal
			writeProperty(this,'trig_source', 'INT');
			closeDevice(this);
			end

			function abortSweep(this)
			openDevice(this);
			writeProperty(this, 'trig_source', 'BUS');
			fprintf(this.Device,':ABOR');
			closeDevice(this);
			end
			end

			%% Protected functions
			methods (Access=protected)
			% Command attributes are {class, attributtes} accepted by
			% validateattributes()
			function createCommandList(this)
			addCommand(this,...
			'cent_freq',':SENS1:FREQ:CENT', 'default',1.5e6,...
			'fmt_spec','%e',...
			'info','(Hz)');
			addCommand(this,...
			'start_freq',':SENS1:FREQ:START', 'default',1e6,...
			'fmt_spec','%e',...
			'info','(Hz)');
			addCommand(this,...
			'stop_freq',':SENS1:FREQ:STOP', 'default',2e6,...
			'fmt_spec','%e',...
			'info','(Hz)');
			addCommand(this,...
			'span',':SENS1:FREQ:SPAN', 'default',1e6,...
			'fmt_spec','%e',...
			'info','(Hz)');
			% IF bandwidth
			addCommand(this,...
			'ifbw',':SENS1:BAND', 'default',100,...
			'fmt_spec','%e',...
			'info','IF bandwidth (Hz)');
			% number of points in the sweep
			addCommand(this,...
			'point_no',':SENS1:SWE:POIN', 'default',1000,...
			'fmt_spec','%i');
			% number of averages
			addCommand(this,...
			'average_no',':SENS1:AVER:COUN', 'default',1,...
			'fmt_spec','%i');
			% number of traces
			addCommand(this,...
			'trace_no',':CALC1:PAR:COUN', 'default',1,...
			'fmt_spec','%i',...
			'info','Number of traces');
			% linear or log sweep
			addCommand(this,...
			'sweep_type',':SENS1:SWE:TYPE', 'default','LIN',...
			'fmt_spec','%s',...
			'info','Linear or log sweep');
			% switch the output signal on/off
			addCommand(this,...
			'enable_out',':OUTP', 'default',0,...
			'fmt_spec','%b',...
			'info','output signal on/off');
			% probe power [dB]
			addCommand(this,...
			'power',':SOUR:POW:LEV:IMM:AMPL', 'default',-10,...
			'fmt_spec','%e',...
			'info','Probe power (dB)');
			% windows arrangement on the display, e.g 'D1'
			addCommand(this,...
			'disp_type',':DISP:WIND1:SPL', 'default','D1',...
			'fmt_spec','%s',...
			'info','Window arrangement');
			% Continuous sweep triggering
			addCommand(this,...
			'cont_trig',':INIT1:CONT', 'default', 0,...
			'fmt_spec','%b');
			addCommand(this,...
			'trig_source', ':TRIG:SOUR', 'default', 'BUS',...
			'fmt_spec','%s')

			% Parametric commands for traces, i can be extended to 4
			for i = 1:2
			% measurement parameters for the traces 1-2, e.g. 'S21'
			i_str = num2str(i);
			addCommand(this,...
			['meas_par',i_str],[':CALC1:PAR',i_str,':DEF'],...
			'default','S21',...
			'fmt_spec','%s',...
			'info','Measurement parameter');
			end
			end
			end
			end

rINSTCONTROL/@MyNa/MyNa.mb36764d01027Toptica-laser-control…

MyNa.mView Options

rINSTCONTROL/@MyNa/MyNa.m
b36764d01027Toptica-laser-control…

MyNa.m
View Options