Diffusion Instrument Control (confint-fix) Browse

MyMetadata.m
e9ae8d828f48confint-fix

MyMetadata.m
View Options

			% MyMetadata stores parameter-value pairs and can be saved in a readable
			% format.
			%
			% Metadata parameters can be strings, numerical values or cells, as well as
			% any arrays and structures of such with arbitrary nesting. Sub-indices are
			% automatically expanded when saving.

			classdef MyMetadata < handle & matlab.mixin.CustomDisplay

			properties (Access = public)

			% Header sections are separated by [hdr_spec, title, hdr_spec]
			title = ''
			hdr_spec = '=='

			% Columns are separated by this symbol (space-tab by default)
			column_sep = ' \t'

			% Comments start from this symbol
			comment_sep = '%'
			line_sep = '\r\n'

			% Limit for column padding. Variables which take more space than
			% this limit are ignored when calculating the padding length.
			pad_lim = 15
			end

			properties (GetAccess = public, SetAccess = protected)
			ParamList = struct()
			end

			methods (Access = public)

			function this = MyMetadata(varargin)
			P = MyClassParser(this);
			processInputs(P, this, varargin{:});
			end

			%Adds a new metadata parameter.
			function addParam(this, param_name, value, varargin)
			assert(isvarname(param_name), ['Parameter name must be a ' ...
			'valid variable name.']);

			p = inputParser();

			% Format specifier for printing the value
			addParameter(p, 'fmt_spec', '', @ischar);

			% Comment to be added to the line
			addParameter(p, 'comment', '', @ischar);
			addParameter(p, 'SubStruct', struct('type',{},'subs',{}),...
			@isstruct)
			parse(p, varargin{:});

			% Store the comment and format specifier. This is done only for
			% a newly added parameter.
			if ~isfield(param_name, this.ParamList)

			% Make sure that the comment does not contain new line or
			% carriage return characters, which would mess up formating
			% when saving the metadata
			[comment, is_mod] = toSingleLine(p.Results.comment);
			this.ParamList.(param_name).comment = comment;

			if is_mod
			warning(['Comment string for ''%s'' has been ' ...
			'converted to single line.'], param_name);
			end

			this.ParamList.(param_name).fmt_spec = p.Results.fmt_spec;
			end

			S = p.Results.SubStruct;
			if isempty(S)

			% Assign value directly
			this.ParamList.(param_name).value = value;
			else

			% Assign using subref structure
			if isfield(this.ParamList.(param_name), 'value')

			% Adding a new subscript to existing parameter
			tmp = this.ParamList.(param_name).value;
			else

			% Creating the value for a new parameter
			tmp = feval([class(value),'.empty']);
			end
			this.ParamList.(param_name).value = subsasgn(tmp,S,value);
			end
			end

			% The function below is useful to ensure the correspondence between
			% metadata parameter names and object property names. It spares
			% some lines of code.
			function addObjProp(this, Obj, tag, varargin)
			addParam(this, tag, Obj.(tag), varargin{:});
			end

			% Print metadata in a readable form
			function str = print(this)

			% Make the function spannable over arrays
			if isempty(this)
			str = '';
			return
			elseif length(this) > 1
			str_arr = arrayfun(@(x)print(x), this, ...
			'UniformOutput', false);
			str = [str_arr{:}];
			return
			end

			% Compose the list of parameter names expanded over subscripts
			% except for those which are already character arrays
			par_names = fieldnames(this.ParamList);

			% Expand parameters over subscripts, except for the character
			% arrays
			exp_par_names = cell(1, length(par_names));
			maxnmarr = zeros(1, length(par_names));

			for i=1:length(par_names)
			tmpval = this.ParamList.(par_names{i}).value;
			exp_par_names{i} = printSubs(tmpval, ...
			'own_name', par_names{i}, ...
			'expansion_test',@(y) ~ischar(y));

			% Max name length for this parameter including subscripts
			maxnmarr(i)=max(cellfun(@(x) length(x), exp_par_names{i}));
			end

			% Calculate width of the name column
			name_pad_length = min(max(maxnmarr), this.pad_lim);

			% Compose list of parameter values converted to char strings
			par_strs = cell(1, length(par_names));

			% Width of the values column will be the maximum parameter
			% string width
			val_pad_length = 0;
			for i=1:length(par_names)
			TmpPar = this.ParamList.(par_names{i});

			for j=1:length(exp_par_names{i})
			tmpnm = exp_par_names{i}{j};
			TmpS = str2substruct(tmpnm);

			if isempty(TmpS)
			tmpval = TmpPar.value;
			else
			tmpval = subsref(TmpPar.value, TmpS);
			end

			%Do the check to detect unsupported data type
			if ischar(tmpval)&&~isvector(tmpval)&&~isempty(tmpval)
			warning(['Argument ''%s'' is a multi-dimensional ',...
			'character array. It will be converted to ',...
			'single string during saving. Use cell',...
			'arrays to save data as a set of separate ',...
			'strings.'],tmpnm)

			% Flatten
			tmpval = tmpval(:);
			end

			%Check for new line symbols in strings
			if (ischar(tmpval)\|\|isstring(tmpval)) && ...
			any(ismember({newline,sprintf('\r')},tmpval))
			warning(['String value must not contain ',...
			'''\\n'' and ''\\r'' symbols, replacing ',...
			'them with '' ''.']);
			tmpval=replace(tmpval,{newline,sprintf('\r')},' ');
			end

			if isempty(TmpPar.fmt_spec)

			% Convert to string with format specifier
			% extracted from the varaible calss
			par_strs{i}{j} = var2str(tmpval);
			else
			par_strs{i}{j} = sprintf(TmpPar.fmt_spec, tmpval);
			end

			% Find maximum length to determine the colum width,
			% but, for beauty, do not account for variables with
			% excessively long value strings
			tmplen = length(par_strs{i}{j});
			if (val_pad_length<tmplen) && (tmplen<=this.pad_lim)
			val_pad_length = tmplen;
			end
			end
			end

			cs = this.column_sep;
			ls = this.line_sep;

			% Make the output string. Start by printing the title.
			str = sprintf([this.hdr_spec, this.title, this.hdr_spec, ls]);

			par_fmt_spec = [sprintf('%%-%is', name_pad_length),...
			cs, sprintf('%%-%is', val_pad_length)];

			% Print parameters
			for i=1:length(par_names)

			% Capitalize the first letter of comment
			comment = this.ParamList.(par_names{i}).comment;
			if ~isempty(comment)
			fmt_comment = [this.comment_sep, ' '...
			upper(comment(1)), comment(2:end)];
			else
			fmt_comment = '';
			end

			% Iterate over the parameter subscripts
			for j=1:length(exp_par_names{i})
			if j==1

			% Add the comment to first line
			str = [str, ...
			sprintf([par_fmt_spec, cs, '%s', ls], ...
			exp_par_names{i}{j}, par_strs{i}{j}, ...
			fmt_comment)]; %#ok<AGROW>
			else
			str = [str, sprintf([par_fmt_spec, ls],...
			exp_par_names{i}{j}, par_strs{i}{j})]; %#ok<AGROW>
			end
			end
			end

			% Prints an extra line separator at the end
			str = [str, sprintf(ls)];
			end

			% Save metadata to a file
			function save(this, filename)
			fileID = fopen(filename,'a');
			fprintf(fileID, print(this));
			fclose(fileID);
			end

			% Create a structure from metadata array
			function MdtList = arrToStruct(this)
			MdtList = struct();

			for i = 1:length(this)
			fn = matlab.lang.makeValidName(this(i).title);
			MdtList.(fn) = this(i);
			end
			end
			end

			methods (Access = public, Static = true)

			% Create metadata indicating the present moment of time
			function TimeMdt = time(title)
			if nargin()>0
			assert(ischar(title)&&isvector(title),...
			'Time field name must be a character vector')
			else
			title = 'Time';
			end

			TimeMdt = MyMetadata();
			TimeMdt.title = title;

			dv = datevec(datetime('now'));
			addParam(TimeMdt, 'Year', dv(1), 'fmt_spec','%i');
			addParam(TimeMdt, 'Month', dv(2), 'fmt_spec','%i');
			addParam(TimeMdt, 'Day', dv(3), 'fmt_spec','%i');
			addParam(TimeMdt, 'Hour', dv(4), 'fmt_spec','%i');
			addParam(TimeMdt, 'Minute', dv(5), 'fmt_spec','%i');
			addParam(TimeMdt, 'Second', floor(dv(6)), 'fmt_spec','%i');
			addParam(TimeMdt, 'Millisecond',...
			round(1000*(dv(6)-floor(dv(6)))),'fmt_spec','%i');
			end

			% Load metadata from file. Return all the entries found and
			% the number of the last line read.
			function [MdtArr, n_end_line] = load(filename, varargin)
			fileID = fopen(filename,'r');

			MasterMdt = MyMetadata(varargin{:});

			% Loop initialization
			MdtArr = MyMetadata.empty();
			line_no = 0;

			% Loop continues until we reach the next header or we reach
			% the end of the file
			while ~feof(fileID)

			% Grabs the current line
			curr_line = fgetl(fileID);

			% Give a warning if the file is empty, i.e. if fgetl
			% returns -1
			if curr_line == -1
			disp(['Read empty file ', filename, '.']);
			break
			end

			% Skips if the current line is empty
			if isempty(deblank(curr_line))
			continue
			end

			S = parseLine(MasterMdt, curr_line);

			switch S.type
			case 'title'

			% Generate a valid identifier and add new metadata
			% to the output list
			TmpMdt = MyMetadata(varargin{:}, 'title', S.match);
			MdtArr = [MdtArr, TmpMdt]; %#ok<AGROW>
			case 'paramval'

			% Add a new parameter-value pair to the current
			% metadata
			[name, val, comment, Subs] = S.match{:};
			addParam(TmpMdt, name, val, 'SubStruct', Subs, ...
			'comment', comment);
			otherwise

			% Exit
			break
			end

			% Increment the counter
			line_no = line_no+1;
			end

			n_end_line = line_no;
			fclose(fileID);
			end
			end

			methods (Access = protected)

			% Parse string and determine the type of string
			function S = parseLine(this, str)
			S = struct( ...
			'type', '', ... % title, paramval, other
			'match', []); % parsed output

			% Check if the line contains a parameter - value pair.
			% First separate the comment if present
			pv_token = regexp(str, this.comment_sep, 'split', 'once');

			if length(pv_token)>1
			comment = pv_token{2}; % There is a comment
			else
			comment = ''; % There is no comment
			end

			% Then process name-value pair. Regard everything after
			% the first column separator as value.
			pv_token = regexp(pv_token{1}, this.column_sep, 'split', ...
			'once');

			% Remove leading and trailing blanks
			pv_token = strtrim(pv_token);

			if length(pv_token)>=2

			% A candidate for parameter-value pair is found. Infer
			% the variable name and subscript reference.
			[Subs, name] = str2substruct(pv_token{1});

			if isvarname(name)

			% Attempt converting the value to a number
			value = str2doubleHedged(pv_token{2});

			S.type = 'paramval';
			S.match = {name, value, comment, Subs};
			return
			end
			end

			% Check if the line contains a title
			title_exp = [this.hdr_spec, '(\w.*)', this.hdr_spec];
			title_token = regexp(str, title_exp, 'once', 'tokens');

			if ~isempty(title_token)

			% Title expression found
			S.type = 'title';
			S.match = title_token{1};
			return
			end

			% No match found
			S.type = 'other';
			S.match = {};
			end

			% Make custom footer for command line display
			% (see matlab.mixin.CustomDisplay)
			function str = getFooter(this)
			if length(this) == 1

			% For a single object display its properties
			str = ['Content:', newline, newline, ...
			replace(print(this), sprintf(this.line_sep), newline)];
			elseif length(this) > 1

			% For a non-empty array of objects display titles
			str = sprintf('\tTitles:\n\n');

			for i = 1:length(this)
			str = [str, sprintf('%i\t%s\n', i, this(i).title)]; %#ok<AGROW>
			end

			str = [str, newline];
			else

			% For an empty array display nothing
			str = '';
			end
			end
			end
			end

rINSTCONTROL/@MyMetadata/MyMetadata.me9ae8d828f48confint-fix

MyMetadata.mView Options

rINSTCONTROL/@MyMetadata/MyMetadata.m
e9ae8d828f48confint-fix

MyMetadata.m
View Options