Diffusion Instrument Control (confint-fix) Browse

MyZiScopeFt.m
2c80f49b1c6bconfint-fix

MyZiScopeFt.m
View Options

			% Spectrum analyzer based on Zurich Instruments UHFLI or MFLI

			classdef MyZiScopeFt < MyZiLockIn & MyDataSource

			properties (GetAccess=public, SetAccess={?MyClassParser})
			n_scope = 1 % number of hardware scope
			n_ch = 1 % number of scope channel

			% Input numbers between 1 and 148 correspond to various signals
			% including physical inputs, outputs, demodulator channels and
			% results of arthmetic operations. See the LabOne user interface
			% for the complete list of choices and corresponding numbers.
			% This number is shifted by +1 compare to the hardware node
			% enumeration as usual.
			signal_in = 1

			% Deas time between scope frame acquisitions. Smaller time results
			% in faster averaging but may not look nice during real time
			% gui update.
			trigholdoff = 0.02 % seconds
			end

			properties (Access = private)
			scope_module % 'handle' (in quotes) to a ZI software scope module
			PollTimer % Timer that regularly reads data drom the scope
			TmpTrace % Temporary variable used for averaging
			end

			properties (Dependent = true)
			scope_path
			fft_rbw % Spacing between fft bins
			poll_period
			end

			events
			NewWave % Triggered when the scope acquires new waves
			end

			methods (Access = public)

			function this = MyZiScopeFt(varargin)

			% Extract poll period from varargin
			p = inputParser();
			p.KeepUnmatched = true;
			addParameter(p, 'poll_period', 0.1, @isnumeric);
			parse(p, varargin{:});
			varargin = struct2namevalue(p.Unmatched);

			this = this@MyZiLockIn(varargin{:});

			% Trace object in this case is directly used for averaging
			this.Trace = MyAvgTrace(...
			'name_x','Time',...
			'unit_x','s',...
			'name_y','Magnitude r',...
			'unit_y','V');
			this.TmpTrace = MyTrace();

			this.PollTimer = timer(...
			'ExecutionMode', 'fixedSpacing',...
			'Period', p.Results.poll_period,...
			'TimerFcn', @(~,~)pollTimerCallback(this));

			createCommandList(this);
			end

			function delete(this)

			% delete function should never throw errors, so protect
			% statements with try-catch
			try
			stopPoll(this)
			catch
			warning(['Could not usubscribe from the scope node ', ...
			'or stop the poll timer.'])
			end

			% Clear the module's thread.
			try
			ziDAQ('clear', this.scope_module);
			catch
			warning('Could not clear the scope module.')
			end

			% Delete timers to prevent them from running indefinitely in
			% the case of program crash
			try
			delete(this.PollTimer)
			catch
			warning('Could not delete the poll timer.')
			end
			end


			function startPoll(this)

			% Configure hardware scope

			% Signal input
			path = sprintf('%s/channels/%i/inputselect', ...
			this.scope_path, this.n_ch);
			ziDAQ('setInt', path, this.signal_in-1);

			% Disable segmented mode of data transfer. This mode is only
			% useful if records longer than 5Mpts are required.
			ziDAQ('setInt', [this.scope_path '/segments/enable'], 0);

			% Take continuous records
			ziDAQ('setInt', [this.scope_path '/single'], 0);

			% Disable the scope trigger
			ziDAQ('setInt', [this.scope_path '/trigenable'], 0);

			% The scope hold off time inbetween acquiring triggers (still
			% relevant if triggering is disabled).
			ziDAQ('setDouble', [this.scope_path '/trigholdoff'], ...
			this.trigholdoff);

			% Enable the scope
			ziDAQ('setInt', [this.scope_path '/enable'], 1);

			% Initialize and configure a software Scope Module.
			this.scope_module = ziDAQ('scopeModule');

			% Do not average
			ziDAQ('set', this.scope_module, ...
			'scopeModule/averager/weight', 1);

			% Set the Scope Module's mode to return frequency domain data.
			ziDAQ('set', this.scope_module, 'scopeModule/mode', 3);

			% Use rectangular window function.
			ziDAQ('set', this.scope_module, 'scopeModule/fft/window', 0);
			ziDAQ('set', this.scope_module, 'scopeModule/fft/power', 1);
			ziDAQ('set', this.scope_module, ...
			'scopeModule/fft/spectraldensity', 1);

			ziDAQ('subscribe', this.scope_module, ...
			[this.scope_path '/wave']);

			ziDAQ('execute', this.scope_module);
			start(this.PollTimer);
			end

			function stopPoll(this)
			stop(this.PollTimer);
			ziDAQ('finish', this.scope_module);
			end

			function pollTimerCallback(this)
			Data = ziDAQ('read', this.scope_module);
			if ziCheckPathInData(Data, [this.scope_path,'/wave'])

			% Get the list of scope waves recorded since the previous
			% poll
			new_waves = Data.(this.dev_id).scopes(this.n_scope).wave;

			% Add waves to the average trace
			for i=1:length(new_waves)
			dt = new_waves{i}.dt;
			n = double(new_waves{i}.totalsamples);

			% Calculate the frequency axis
			this.TmpTrace.x = linspace(0, (1-1/n)/(2*dt), n);
			this.TmpTrace.y = new_waves{i}.wave;
			is_compl = addAverage(this.Trace, this.TmpTrace);
			if is_compl && strcmpi(this.Trace.avg_type, 'lin')
			triggerNewData(this);
			end
			end

			notify(this, 'NewWave');
			end
			end
			end

			methods (Access = protected)
			function createCommandList(this)
			addCommand(this, 'scope_rate', ...
			'readFcn', @this.readScopeRate, ...
			'writeFcn', @this.writeScopeRate, ...
			'info', '(samples/s)');

			addCommand(this, 'n_pt', ...
			'readFcn', @this.readNpt, ...
			'writeFcn', @this.writeNpt, ...
			'info', 'Scope wave length');
			end

			function createMetadata(this)
			createMetadata@MyZiLockIn(this);

			addObjProp(this.Metadata, this, 'n_scope', 'comment', ...
			'Hardware scope number');
			addObjProp(this.Metadata, this, 'n_ch', 'comment', ...
			'Scope channel');
			addObjProp(this.Metadata, this, 'signal_in', 'comment', ...
			'Signal input number');
			addObjProp(this.Metadata, this, 'trigholdoff', 'comment', ...
			['(s), the scope hold off time inbetween acquiring ' ...
			'triggers']);
			addParam(this.Metadata, 'poll_period', ...
			this.PollTimer.Period, 'comment', '(s)');
			end

			function val = readScopeRate(this)
			tn = ziDAQ('getDouble', [this.scope_path '/time']);
			val = this.clockbase/(2^tn);
			end

			function writeScopeRate(this, val)
			tn = round(log2(this.clockbase/val));

			% Trim to withn 0 and 16
			tn = max(0,tn);
			tn = min(tn, 16);
			ziDAQ('setDouble', [this.scope_path '/time'], tn);
			clearData(this.Trace);
			end

			function val = readNpt(this)
			val = ziDAQ('getDouble', [this.scope_path '/length']);
			end

			function writeNpt(this, val)
			ziDAQ('setDouble', [this.scope_path '/length'], val);
			clearData(this.Trace);
			end
			end

			methods
			function val = get.scope_path(this)
			val = sprintf('/%s/scopes/%i',this.dev_id,this.n_scope-1);
			end

			function val = get.fft_rbw(this)
			l = length(this.Trace.x);
			if l>=2
			val = this.Trace.x(2)-this.Trace.x(1);
			else
			val = Inf;
			end
			end

			function val = get.poll_period(this)
			val = this.PollTimer.Period;
			end
			end
			end

rINSTCONTROL/@MyZiScopeFt/MyZiScopeFt.m2c80f49b1c6bconfint-fix

MyZiScopeFt.mView Options

rINSTCONTROL/@MyZiScopeFt/MyZiScopeFt.m
2c80f49b1c6bconfint-fix

MyZiScopeFt.m
View Options