= Imaris First Time Setup = When launching Imaris for the first time, you need to make some initial adjustments == Define the License Server if there is none == 1. Click on the {nav icon=key, name=Key} icon (written Administrate) 2. Select **Define Floating License Server** |Servername | ptbioplicense.epfl.ch | | Port | 2700 | {F512625, layout=center} 2. Provide the amount of **Texture Cache Limit** which depends on the GPU of the machine | PC | GPU |RAM|Suggested| |----------------|-----------------|-----|----------| |Pink Panther | Quadro K5000| 4GB | 3750 | |Mantis Shrimp| Quadro K5200| 8GB | 7750 | |Squared Cell | Quadro 620 | 2GB | 1750 | |Red Panda | GTX 580 | 2GB | 1750 | 3. Set The SWAP Folder Somewhere other than C:/ 1. Press {key CTRL P} to access the **Properties Menu** 2. Navigate to {nav Calculation} and change the **Cache File Path** to something like `D:\Swap` 4. Make sure that the XTensions folder points to the Matlab files 1. From the ** Properties Menu**, navigate to {nav Custom Tools} 2. Change **rtmatlab** to **matlab** = Imaris Remote License Manager (RLM) = At the BIOP, we opted for a floating license approach to Imaris, as we have two full licenses and two basic licenses (Up to Imaris 7.6.1) and over 10 computers that could benefit from using Imaris. == ptbioplicense.epfl.ch == We requested a static IP address as well as an alias 'ptbioplicense.epfl.ch' to make connection to the license server as simple as possible. This allows us to manage the licenses via the RLM Web interface at http://ptbioplicense.epfl.ch:5054 (username 'biop', no password). == In Case Of License Problems == Connect to **ptbioplicense.epfl.ch** using Remote Desktop Connection (You can use your BIOP credentials) {F512599, layout=center} Then open **Windows Services** by clicking on the Desktop shortcut and locate **Imaris Remote License Manager** {nav Right Click > **Restart**} {F512617, layout=center} Eventually, you may have to start the `Task Manager` and `end task` of `bitplane`. == Changing the `bitplane.lic` and `bitplane.opt` Files == If we get new `bitplane.lic` and `bitplane.opt` these are the steps to change them 1. Remotely login to `ptbioplicense.epfl.ch` 2. Go to **Services** and stop the **BitplaneRLM** Service 3. Go to C:\rlm and copy the old `bitplane.lic` and `bitplane.opt` files somewhere safe, rename them. 4. Copy the new `bitplane.lic` and `bitplane.opt` files into the rlm folder. 5. Restart the **BitplaneRLM** Service

= Imaris First Time Setup = When launching Imaris for the first time, you need to make some initial adjustments == Define the License Server if there is none == 1. Click on the {nav icon=key, name=Key} icon (written Administrate) 2. Select **Define Floating License Server** |Servername | ptbioplicense.epfl.ch | | Port | 2700 | {F512625, layout=center} 2. Provide the amount of **Texture Cache Limit** which depends on the GPU of the machine | PC | GPU |RAM|Suggested| |----------------|-----------------|-----|----------| |Pink Panther | Quadro K5000| 4GB | 3750 | |Mantis Shrimp| Quadro K5200| 8GB | 7750 | |Squared Cell | Quadro 620 | 2GB | 1750 | |Red Panda | GTX 580 | 2GB | 1750 | 3. Set The SWAP Folder Somewhere other than C:/ 1. Press {key CTRL P} to access the **Properties Menu** 2. Navigate to {nav Calculation} and change the **Cache File Path** to something like `D:\Swap` 4. Make sure that the XTensions folder points to the Matlab files 1. From the ** Properties Menu**, navigate to {nav Custom Tools} 2. Change **rtmatlab** to **matlab** = Imaris Remote License Manager (RLM) = At the BIOP, we opted for a floating license approach to Imaris, as we have two full licenses and two basic licenses (Up to Imaris 7.6.1) and over 10 computers that could benefit from using Imaris. == ptbioplicense.epfl.ch == We requested a static IP address as well as an alias 'ptbioplicense.epfl.ch' to make connection to the license server as simple as possible. === Update 2019 === Our Intel NUC passed away and we requested a virtual machine through SV-IT and Oli installed everything. The machine is still accessible via 'ptbioplicense.epfl.ch' Issues with the machine should be adressed to [[mailto:paul.schalbetter@epfl.ch| Paul Schalbetter]] == In Case Of License Problems == Connect to **ptbioplicense.epfl.ch** using Remote Desktop Connection (You can use your BIOP credentials) {F512599, layout=center} Then open **Windows Services** by clicking on the Desktop shortcut and locate **Imaris Remote License Manager** {nav Right Click > **Restart**} {F512617, layout=center} Eventually, you may have to start the `Task Manager` and `end task` of `bitplane`. == Changing the `bitplane.lic` and `bitplane.opt` Files == If we get new `bitplane.lic` and `bitplane.opt` these are the steps to change them 1. Remotely login to `ptbioplicense.epfl.ch` 2. Go to **Services** and stop the **BitplaneRLM** Service 3. Go to C:\rlm and copy the old `bitplane.lic` and `bitplane.opt` files somewhere safe, rename them. 4. Copy the new `bitplane.lic` and `bitplane.opt` files into the rlm folder. 5. Restart the **BitplaneRLM** Service

= Imaris First Time Setup = When launching Imaris for the first time, you need to make some initial adjustments == Define the License Server if there is none == 1. Click on the {nav icon=key, name=Key} icon (written Administrate) 2. Select **Define Floating License Server** |Servername | ptbioplicense.epfl.ch | | Port | 2700 | {F512625, layout=center} 2. Provide the amount of **Texture Cache Limit** which depends on the GPU of the machine | PC | GPU |RAM|Suggested| |----------------|-----------------|-----|----------| |Pink Panther | Quadro K5000| 4GB | 3750 | |Mantis Shrimp| Quadro K5200| 8GB | 7750 | |Squared Cell | Quadro 620 | 2GB | 1750 | |Red Panda | GTX 580 | 2GB | 1750 | 3. Set The SWAP Folder Somewhere other than C:/ 1. Press {key CTRL P} to access the **Properties Menu** 2. Navigate to {nav Calculation} and change the **Cache File Path** to something like `D:\Swap` 4. Make sure that the XTensions folder points to the Matlab files 1. From the ** Properties Menu**, navigate to {nav Custom Tools} 2. Change **rtmatlab** to **matlab** = Imaris Remote License Manager (RLM) = At the BIOP, we opted for a floating license approach to Imaris, as we have two full licenses and two basic licenses (Up to Imaris 7.6.1) and over 10 computers that could benefit from using Imaris. == ptbioplicense.epfl.ch == We requested a static IP address as well as an alias 'ptbioplicense.epfl.ch' to make connection to the license server as simple as possible. This allows us to manage the licenses via the RLM Web interface at http://=== Update 2019 === Our Intel NUC passed away and we requested a virtual machine through SV-IT and Oli installed everything. The machine is still accessible via 'ptbioplicense.epfl.ch:5054 (username 'biop', no password).ch' Issues with the machine should be adressed to [[mailto:paul.schalbetter@epfl.ch| Paul Schalbetter]] == In Case Of License Problems == Connect to **ptbioplicense.epfl.ch** using Remote Desktop Connection (You can use your BIOP credentials) {F512599, layout=center} Then open **Windows Services** by clicking on the Desktop shortcut and locate **Imaris Remote License Manager** {nav Right Click > **Restart**} {F512617, layout=center} Eventually, you may have to start the `Task Manager` and `end task` of `bitplane`. == Changing the `bitplane.lic` and `bitplane.opt` Files == If we get new `bitplane.lic` and `bitplane.opt` these are the steps to change them 1. Remotely login to `ptbioplicense.epfl.ch` 2. Go to **Services** and stop the **BitplaneRLM** Service 3. Go to C:\rlm and copy the old `bitplane.lic` and `bitplane.opt` files somewhere safe, rename them. 4. Copy the new `bitplane.lic` and `bitplane.opt` files into the rlm folder. 5. Restart the **BitplaneRLM** Service