diff --git a/Plotting/EventPlots.py b/Plotting/EventPlots.py index e8b64e8..9f8f392 100644 --- a/Plotting/EventPlots.py +++ b/Plotting/EventPlots.py @@ -1,720 +1,720 @@ import numpy as np import matplotlib import matplotlib.pyplot as plt import matplotlib.patches as patches from matplotlib.ticker import EngFormatter from matplotlib.widgets import CheckButtons, Button import argparse import platform import shelve import os import Functions import LoadData import NanoporeClasses as NC from holoviews.operation import histogram import holoviews as hv from holoviews import opts import seaborn as sns sns.set() hv.extension('bokeh') # needed for plotting in jupyter from bokeh.resources import INLINE import bokeh.io bokeh.io.output_notebook(INLINE) # temporary, ignore bokeh warnings import warnings warnings.simplefilter(action='ignore', category=DeprecationWarning) Amp = EngFormatter(unit='A', places=2) Time = EngFormatter(unit='s', places=2) Volt = EngFormatter(unit='V', places=2) Cond = EngFormatter(unit='S', places=2) # Extract y and tau out of events def extractytau(filteredevents, showCurrent, normalized = False): if showCurrent or normalized: if normalized: yVals = [event.currentDrop/event.baseline for event in filteredevents] else: yVals = [event.currentDrop for event in filteredevents] tau = [event.eventLength for event in filteredevents] else: yVals = [event.currentDrop / event.voltage for event in filteredevents if event.voltage > 0] tau = [event.eventLength for event in filteredevents if event.voltage > 0] return tau, yVals def PlotGTau(eventClass, xLim = None, yLim = None, showCurrent = False, normalized = False, showLog=False, showNonFitted=False): """ Function used to produce scatter plots and histograms of the events. The figure produced has 3 subplots: Up: Histogram with the number of events per event length Right: Histogram with the number of events per conductance drop [nS] Center: Scatter-plot of all the events wiht in on x-coordinates the event length [s] and in y-coordinates the conductance drop [nS]. In the plots, the events were distributed into the 3 types of events: CUSUM-fitted in red ('Real' type) Impulse in blue ('Impulse' type) Non-fitted in green ('Rough' type) Parameters ---------- eventClass : AllEvents object All the events to be plotted. xLim : 2D list, optional limits on x axis yLim : 2D list, optional limits on y axis showCurrent : bool, optional False by default. If True, it will change the SI unit in the y-axis from siemens [S] to ampers [A]. So instead of units in conductance drop, it will have current drop. normalized : bool, optional False by default. If True, it will change in the y-axis the unit from siemens [S] to normalized current drop without unit. showLog : bool, optional False by default. If True, it will change the axis to logarithmic showNonFitted: bool, optional False by default. If True, it will show non fitted events """ # categorize events in three types # CUSUM fitted events CUSUMEvents = eventClass.GetEventTypes('CUSUM') if len(CUSUMEvents) == 0: CUSUMEvents = eventClass.GetEventTypes('Real') # Non-fitted events if showNonFitted: nonFittedEvents = eventClass.GetEventTypes('Rough') else: nonFittedEvents = [] # Impulse events impulseEvents = eventClass.GetEventTypes('Impulse') # select min max events = [event for event in eventClass.events if showCurrent or event.voltage is not 0] allTau, allYVals = extractytau(events, showCurrent, normalized) maxy = 1 if normalized else 1.1 * np.percentile(allYVals, 99) minx = 0.9 * np.percentile(allTau, 1) if showLog else 0 brx = (minx, 1.1 * np.percentile(allTau, 99)) if xLim is None else tuple(xLim) bry = (0, maxy) if yLim is None else tuple(yLim) br = dict() br['x'] = brx br['y'] = bry showlogHist = dict() showlogHist['x'] = showLog showlogHist['y'] = False xlabel = 'Dwell time (s)' ylabel = 'Current drop (A)' if showCurrent else 'Conductance drop (S)' tau1, yVals1 = extractytau(impulseEvents, showCurrent, normalized) points = hv.Points((tau1, yVals1), label='impulse') tau2, yVals2 = extractytau(CUSUMEvents, showCurrent, normalized) points2 = hv.Points((tau2, yVals2), label='CUSUM') tau3, yVals3 = extractytau(nonFittedEvents, showCurrent, normalized) points3 = hv.Points((tau3, yVals3), label='non-fitted') xhist, yhist = (histogram(points3, bin_range=br[dim], dimension=dim, log=(showlogHist[dim] and len(tau3) > 0),normed=False) * histogram(points2, bin_range=br[dim], dimension=dim, log=(showlogHist[dim] and len(tau2) > 0),normed=False) * histogram(points, bin_range=br[dim], dimension=dim, log=(showlogHist[dim] and len(tau1) > 0),normed=False) for dim in 'xy') return ((points3 * points2 * points).opts(logx=showLog, xlabel=xlabel, ylabel=ylabel, width=500, height=500, xlim=brx, ylim=bry) << yhist.opts( width=200) << xhist.opts(height=150, logx=showLog)).opts( opts.Histogram(xlabel='', ylabel='', alpha=0.3, show_legend=False)) def PlotG_tau(translocationEvents, fig=None, savefile=None, showCurrent=False, normalized=False, showCUSUM=True, showLog=False): """ Function used to produce scatter plots and histograms of the events. The figure produced has 3 subplots: Up: Histogram with the number of events per event length Right: Histogram with the number of events per conductance drop [nS] Center: Scatter-plot of all the events wiht in on x-coordinates the event length [s] and in y-coordinates the conductance drop [nS]. In the plots, the events were distributed into the 3 types of events: CUSUM-fitted in red ('Real' type) Non-fitted in blue ('Rough' type) Impulse in green ('Impulse' type) Parameters ---------- events : AllEvents object All the events to be plotted. savefile : str, optional Full path to file where the plots will be saved. showCurrent : bool, optional False by default. If True, it will change the SI unit in the y-axis from siemens [S] to ampers [A]. So instead of units in conductance drop, it will have current drop. normalized : bool, optional False by default. If True, it will change in the y-axis the unit from siemens [S] to normalized current drop without unit. showCUSUM : bool, optional True by default. """ # categorize events in three types # CUSUM fitted events CUSUMEvents = translocationEvents.GetEventTypes('CUSUM') if len(CUSUMEvents) == 0: CUSUMEvents = translocationEvents.GetEventTypes('Real') # Non-fitted events nonFittedEvents = translocationEvents.GetEventTypes('Rough') # Impulse events impulseEvents = translocationEvents.GetEventTypes('Impulse') catEvents = (CUSUMEvents, nonFittedEvents, impulseEvents) # Save figure def SavePlot(event): # Check if directory exists directory = os.path.dirname(savefile) if showCurrent: fig.savefig(directory + os.sep + 'PlotITau.pdf', transparent=True) else: fig.savefig(directory + os.sep + 'PlotGTau.pdf', transparent=True) def ShowLog(event): name = axScatter.xaxis._scale.name bshowlog.label.set_text('Show ' + name) axScatter.set_xscale('linear') if name == 'log' else axScatter.set_xscale('log') # definitions for the axes left, width = 0.15, 0.55 bottom, height = 0.1, 0.6 left_h = left + width + 0.015 bottom_h = bottom + height + 0.015 rect_scatter = [left, bottom, width, height] rect_histx = [left, bottom_h, width, 0.2] rect_histy = [left_h, bottom, 0.2, height] # start with a rectangular Figure if fig is None: fig = plt.figure(1, figsize=(10, 8)) # define axes and link histogram to scatterplot axScatter = fig.add_axes(rect_scatter) axHistx = fig.add_axes(rect_histx, sharex=axScatter) axHisty = fig.add_axes(rect_histy, sharey=axScatter) # Checkboxes to turn on or off events rax = plt.axes([0.75, 0.73, 0.14, 0.15]) visBool = [True, False, True] labelsCheckBox = ('CUSUM-fitted', 'Not fitted', 'impulse') check = CheckButtons(rax, labelsCheckBox, visBool) # Link button to axes to preserve function rax._check = check bax = plt.axes([0.77, 0.9, 0.1, 0.03]) bnext = Button(bax, 'Save figure') bnext.on_clicked(SavePlot) # Link button to axes to preserve function bax._bnext = bnext baxl = plt.axes([0.77, 0.95, 0.1, 0.03]) txt = 'log' if showLog else 'linear' bshowlog = Button(baxl, 'Show ' + txt) bshowlog.on_clicked(ShowLog) # Link button to axes to preserve function bax._bshowlog = bshowlog # Show labels def setlabels(): plt.setp(axHistx.get_xticklabels(), visible=False) plt.setp(axHisty.get_yticklabels(), visible=False) axScatter.set_xlabel('Event length (s)') axScatter.xaxis.set_major_formatter(Time) if normalized: axScatter.set_ylabel('current drop (normalized)') else: if showCurrent: axScatter.set_ylabel('current drop (A)') axScatter.yaxis.set_major_formatter(Amp) else: axScatter.set_ylabel('Conductance drop (G)') axScatter.yaxis.set_major_formatter(Cond) # Set limits allEvents = [event for event in translocationEvents.events if showCurrent or event.voltage is not 0] bins = 100 extra = 0.1 # 0.1 = 10% allTau, allYVals = extractytau(allEvents, showCurrent) yClean = [y for y in allYVals if str(y) != 'nan'] taurangeHist = np.linspace(min(allTau), max(allTau), num=bins) yValsrangeHist = np.linspace(min(yClean), max(yClean), num=bins) # define colors of the 3 classes colors = ['tomato', 'lightgreen', 'skyblue'] linecolors = ['red', 'green', 'blue'] # the scatter plot: scatters = [None]*3 def PlotEvents(visBool): # clear axes axScatter.clear() axHistx.clear() axHisty.clear() nrEvents = 0 for i in range(len(catEvents)): # If checkbox is True, plot events if visBool[i]: # Extract Tau and Y events = catEvents[i] tau, yVals = extractytau(events, showCurrent) scatters[i] = axScatter.scatter(tau, yVals, color=colors[i], marker='o', s=30, linewidths=0.1, edgecolors=linecolors[i], picker=5, visible=visBool[i]) axHistx.hist(tau, bins=taurangeHist, color=colors[i], visible=visBool[i]) axHisty.hist(yVals, bins=yValsrangeHist, orientation='horizontal', color=colors[i], visible=visBool[i]) nrEvents += len(events) if showLog: axScatter.set_xscale('log') # set limits if len(allTau) > 0: tauRange = np.max(allTau) - np.min(allTau) yRange = np.max(yClean) - np.min(yClean) axScatter.set_xlim((np.max([np.min(allTau) - extra * tauRange, 1e-6]), np.max(allTau) + extra * tauRange)) axScatter.set_ylim((np.min(yClean) - extra * yRange, np.max(yClean) + extra * yRange)) setlabels() fig.suptitle('{} number of events'.format(nrEvents)) PlotEvents(visBool) # If click on checkbox, switch Boolean and replot events def func(label): for i in range(len(labelsCheckBox)): if label == labelsCheckBox[i]: visBool[i] = not visBool[i] PlotEvents(visBool) plt.draw() # When clicking on event def onpick(event): for i in range(len(catEvents)): if event.artist == scatters[i]: N = len(event.ind) if not N: return True figi = plt.figure(figsize=(10, 6)) for subplotnum, dataind in enumerate(event.ind): ax = figi.add_subplot(N, 1, subplotnum + 1) PlotEvent(catEvents[i][dataind], ax, savefile, showCUSUM) figi.show() return True fig.canvas.mpl_connect('pick_event', onpick) check.on_clicked(func) if not hasattr(fig, '_AnalysisUI__attached'): plt.show() def PlotGTauVoltage(eventClass, bins=20, xLim=None, yLim=None, showCurrent=False, voltageLimits=None, showLog=False, heatmap=False): voltagesList = eventClass.GetAllVoltages() if voltageLimits is not None: voltagesList = [x for x in voltagesList if x >= voltageLimits[0] and x <= voltageLimits[1]] # select min max events = [event for event in eventClass.events if (showCurrent or event.voltage is not 0) and event.voltage in voltagesList] allTau, allYVals = extractytau(events, showCurrent) maxy = 1.1 * np.percentile(allYVals, 99) minx = 0.9 * np.percentile(allTau, 1) if showLog else 0 brx = (minx, 1.1 * np.percentile(allTau, 99)) if xLim is None else tuple(xLim) bry = (0, maxy) if yLim is None else tuple(yLim) brxbins = np.linspace(brx[0], brx[-1], bins).tolist() brybins = np.linspace(bry[0], bry[-1], bins).tolist() # define of variables colors = sns.color_palette(n_colors=len(voltagesList)) colorlist = ["#%02x%02x%02x" % (int(color[0]*255), int(color[1]*255), int(color[2]*255)) for color in colors] xlabel = 'Dwell time (s)' ylabel = 'Current drop (A)' if showCurrent else 'Conductance drop (S)' # Filter points specifically for the heatmap allTauf = [xval for (xval, yval) in zip(allTau, allYVals) if xval > brx[0] and xval < brx[-1] and yval > bry[0] and yval < bry[-1]] allYValsf = [yval for (xval, yval) in zip(allTau, allYVals) if xval > brx[0] and xval < brx[-1] and yval > bry[0] and yval < bry[-1]] hexT = hv.HexTiles((allTauf, allYValsf)) for i, voltage in enumerate(voltagesList): selectEvents = eventClass.GetEventsforVoltages(voltage) tau, yVals = extractytau(selectEvents, showCurrent) points_ = hv.Points((tau, yVals), label=str(Volt.format_data(voltage))) - xhist_ = histogram(points, bins=brxbins, dimension='x', log=(showLog and len(tau) > 0), normed=False) - yhist_ = histogram(points, bins=brybins, dimension='y', normed=False) + xhist_ = histogram(points_, bins=brxbins, dimension='x', log=(showLog and len(tau) > 0), normed=False) + yhist_ = histogram(points_, bins=brybins, dimension='y', normed=False) if i == 0: points = points_ xhist = xhist_ yhist = yhist_ else: points = points * points_ xhist = xhist * xhist_ yhist = yhist * yhist_ if heatmap and not showLog: return ((hexT*points).opts(logx=showLog, xlabel=xlabel, ylabel=ylabel, width=500, height=500, xlim=brx, ylim=bry) \ << yhist.opts(width=200) << xhist.opts(height=150, logx=showLog)).opts( opts.Histogram(fill_color=hv.Cycle(colorlist), xlabel='', ylabel='', alpha=0.3, show_legend=False), opts.HexTiles(min_count=0, tools=['hover']), opts.Points(color=hv.Cycle(colorlist), alpha=1, size=1, muted_alpha=.1)) else: return (points.opts(logx=showLog, xlabel=xlabel, ylabel=ylabel, width=500, height=500, xlim=brx, ylim=bry)\ << yhist.opts(width=200) << xhist.opts(height=150, logx=showLog)).opts( opts.Histogram(fill_color=hv.Cycle(colorlist), xlabel='', ylabel='', alpha=0.3, show_legend=False), opts.Points(color=hv.Cycle(colorlist), alpha=0.4, size=6, muted_alpha=.05)) def PlotEvent(event, ax=None, savefile=os.getcwd(), showCUSUM=True, showCurrent=False, showButtons = True, axisFormatter = True, plotTitleBool = True): """ Function used to plot a single event passed in argument. The event will be represented in a blue trace and the baseline in a red trace. Parameters ---------- event : TranslocationEvent object Event to be plotted. ax :axes.Axes object or array of Axes object Axes of the plot. savefile : str, optional By default, the current working directory. Full path to the directory to save the plot. showCUSUM : bool, optional False by default. If True, it will plot the CUSUM-fit overlayed in yellow. """ #Link event to axes to keep it around if ax is None: #plt.figure(figsize=(10, 6)) fig, ax = plt.subplots(figsize=(10, 6)) ax._event = event def SavePlot(eventMouse): # Check if directory exists directory = os.path.dirname(savefile) savename=directory + os.sep + 'event.pdf' i = 1 while os.path.exists(directory + os.sep + 'event_{}.pdf'.format(i)): i += 1 savename = directory + os.sep + 'event_{}.pdf'.format(i) eventMouse.inaxes.figure.savefig(savename, transparent=True) def ShowFullTrace(eventMouse): event=eventMouse.inaxes.figure.axes[0]._event ShowEventInTrace(event) if showCUSUM and hasattr(event, 'changeTimes') and len(event.changeTimes)>=2: eventLength = event.eventLengthCUSUM currentDrop = event.currentDropCUSUM else: showCUSUM=False eventLength = event.eventLength currentDrop = event.currentDrop fn=filename_w_ext = os.path.basename(event.filename) if showCurrent: plotTitle = fn + '\n' + 'Event length: {}\nCurrent drop: {} with voltage {}'.format( Time.format_data(eventLength), Cond.format_data(currentDrop), Volt.format_data(event.voltage)) else: plotTitle = fn + '\n' + 'Event length: {}\nConductance drop: {} with voltage {}'.\ format(Time.format_data(eventLength), Cond.format_data(currentDrop/event.voltage),Volt.format_data(event.voltage)) ax.set_xlabel('time (s)') ax.set_ylabel('current (A)') if axisFormatter: ax.xaxis.set_major_formatter(Time) ax.yaxis.set_major_formatter(Amp) if plotTitleBool: plt.title(plotTitle) if showButtons: # Add buttons # Save button bax = plt.axes([0.77, 0.95, 0.15, 0.03]) bsave = Button(bax, 'Save figure') bsave.on_clicked(SavePlot) # Link button to axes to preserve function ax._bsave = bsave # Show original trace button bax2 = plt.axes([0.77, 0.9, 0.15, 0.03]) bfull = Button(bax2, 'Show original Trace') # Link button to axes to preserve function ax._bfull = bfull bfull.on_clicked(ShowFullTrace) #Plotting timeVals1 = np.linspace(0, len(event.before) / event.samplerate, num=len(event.before)) timeVals2 = np.linspace(0 + max(timeVals1), len(event.eventTrace) / event.samplerate + max(timeVals1), num=len(event.eventTrace)) timeVals3 = np.linspace(0 + max(timeVals2), len(event.after) / event.samplerate + max(timeVals2), num=len(event.after)) ax.plot(np.append(timeVals1, timeVals2[0]), np.append(event.before, event.eventTrace[0]), color='tomato') ax.plot(timeVals2, event.eventTrace, color='mediumslateblue') ax.plot(np.append(timeVals2[-1], timeVals3), np.append(event.eventTrace[-1], event.after), color='tomato') if showCUSUM: timeVals = np.linspace(0, len(event.segmentedSignal) / event.samplerate, num=len(event.segmentedSignal)) if hasattr(event,'mcbefore') and hasattr(event,'mcafter') and hasattr(event,'mctrace'): ax.plot(timeVals1, event.mcbefore,'--', color='tomato') x=np.append(np.append(timeVals1[-1],timeVals2),timeVals3[0]) y=np.append(np.append(event.mcbefore[-1],event.mctrace),event.mcafter[0]) ax.plot(x, y, color='yellow') ax.plot(timeVals3, event.mcafter,'--', color='tomato') else: ax.plot(timeVals,event.segmentedSignal, color='yellow') #,timeVals3[0],event.mcafter[0] else: beforeBaseline=np.full(len(event.before), event.baseline) ax.plot(timeVals1,beforeBaseline, '--', color='tomato') afterBaseline = np.full(len(event.after), event.baseline) ax.plot(timeVals3,afterBaseline, '--', color='tomato') meanTrace = np.full(len(event.eventTrace), event.baseline-event.currentDrop) ax.plot(timeVals2,meanTrace, '--', color='mediumslateblue') if 'fig' in locals(): plt.show() def ShowEventInTrace_SignalPreloaded(FullTrace, AllData, eventnumber, ax, line = None, firstCall = True, dscorrection = None): times = np.linspace(0, len(FullTrace) / AllData.events[eventnumber].samplerate, num=len(FullTrace)) if line: line.set_ydata(FullTrace) line.set_xdata(times) if firstCall: ax.set_xlim(np.min(times), np.max(times)) ax.set_ylim(np.min(FullTrace), np.max(FullTrace)) print('updated lines') else: ax.plot(times, FullTrace, zorder=1) print('Updated plot') ax.set_xlabel('time (s)') ax.set_ylabel('current (A)') # Create a Rectangle patch if dscorrection: if hasattr(AllData.events[eventnumber], 'changeTimes') and len(AllData.events[eventnumber].changeTimes) > 2: start_i = (AllData.events[eventnumber].beginEventCUSUM - len(AllData.events[eventnumber].before)) / AllData.events[eventnumber].samplerate * dscorrection end_i = (AllData.events[eventnumber].endEventCUSUM + len(AllData.events[eventnumber].after)) / AllData.events[eventnumber].samplerate * dscorrection else: start_i = (AllData.events[eventnumber].beginEvent - len(AllData.events[eventnumber].before)) / AllData.events[eventnumber].samplerate * dscorrection end_i = (AllData.events[eventnumber].endEvent + len(AllData.events[eventnumber].after)) / AllData.events[eventnumber].samplerate * dscorrection else: if hasattr(AllData.events[eventnumber], 'changeTimes') and len(AllData.events[eventnumber].changeTimes) > 2: start_i = (AllData.events[eventnumber].beginEventCUSUM - len(AllData.events[eventnumber].before)) / \ AllData.events[eventnumber].samplerate end_i = (AllData.events[eventnumber].endEventCUSUM + len(AllData.events[eventnumber].after)) / \ AllData.events[eventnumber].samplerate else: start_i = (AllData.events[eventnumber].beginEvent - len(AllData.events[eventnumber].before)) / \ AllData.events[eventnumber].samplerate end_i = (AllData.events[eventnumber].endEvent + len(AllData.events[eventnumber].after)) / AllData.events[ eventnumber].samplerate minE = np.min(np.append(np.append(AllData.events[eventnumber].eventTrace, AllData.events[eventnumber].before), AllData.events[eventnumber].after)) maxE = np.max(np.append(np.append(AllData.events[eventnumber].eventTrace, AllData.events[eventnumber].before), AllData.events[eventnumber].after)) rect = patches.Rectangle((start_i, minE - 0.1 * (maxE - minE)), end_i - start_i, maxE + 0.2 * (maxE - minE) - minE, linestyle='--', linewidth=1, edgecolor='r', facecolor='none', zorder=10) # Add the patch to the Axes print(ax.patches.clear()) ax.add_patch(rect) def ShowEventInTrace(event, lowPass = 1e3): """ Function used to show the event with it's location framed in red in the original full signal trace in blue. Parameters ---------- event : TranslocationEvent object Event to be plotted. LowPass low pass filter, default set to 1 kHz """ filename = event.filename loadedData = LoadData.OpenFile(filename, lowPass, True) fig, ax = plt.subplots(figsize=(10, 6)) if loadedData['samplerate'] > lowPass: output = Functions.LowPass(loadedData['i1'], loadedData['samplerate'], lowPass) FullTrace = output['data'] samplerate = output['samplerate'] else: FullTrace = loadedData['i1'] samplerate = loadedData['samplerate'] times = np.linspace(0, len(FullTrace) / samplerate, num=len(FullTrace)) ax.plot(times, FullTrace, zorder=1) ax.set_xlabel('time (s)') ax.set_ylabel('current (A)') ax.xaxis.set_major_formatter(Time) ax.yaxis.set_major_formatter(Amp) # Create a Rectangle patch if hasattr(event,'changeTimes') and len(event.changeTimes)>2: start_i = (event.beginEventCUSUM - len(event.before))/event.samplerate end_i = (event.endEventCUSUM + len(event.after))/event.samplerate else: start_i = (event.beginEvent - len(event.before))/event.samplerate end_i = (event.endEvent + len(event.after))/event.samplerate minE=np.min(np.append(np.append(event.eventTrace,event.before),event.after)) maxE=np.max(np.append(np.append(event.eventTrace,event.before),event.after)) rect = patches.Rectangle((start_i, minE-0.1*(maxE-minE)), end_i-start_i, maxE+0.2*(maxE-minE)-minE, linestyle='--', linewidth=1, edgecolor='r', facecolor='none',zorder=10) # Add the patch to the Axes ax.add_patch(rect) plt.title(os.path.basename(filename)) plt.show() def PlotCurrentTrace(currentTrace, samplerate): """ Function used in TranslocationEvent class methods in the NanoporeClasses module to plot events. It will plot the TranslocationEvent's currrentTrace passed in argument. Parameters ---------- currentTrace : list of float Data points in current to be plotted. samplerate : float Sampling frequency of the data acquisition. """ timeVals = np.linspace(0, len(currentTrace) / samplerate, num=len(currentTrace)) fig,ax=plt.subplots(figsize=(10, 6)) ax.plot(timeVals, currentTrace) ax.set_xlabel('time (s)') ax.set_ylabel('current (A)') ax.xaxis.set_major_formatter(Time) ax.yaxis.set_major_formatter(Amp) plt.show() def PlotCurrentTraceBaseline(before, currentTrace, after, samplerate, plotTitle=''): """ Function used in TranslocationEvent class methods in the NanoporeClasses module to plot events. It will plot TranslocationEvent's currentTrace and the surrounding baseline (after and before) passed in argument. Parameters ---------- before : list of float Data points in current of the baseline trace before the event. currentTrace : list of float Data points in current of the event trace. after : list of float Data points in current of the baseline trace after the event. samplerate : float Sampling frequency of the data aquisition. plotTitle : str, optional Plot title. """ timeVals1 = np.linspace(0, len(before) / samplerate, num=len(before)) timeVals2 = np.linspace(0 + max(timeVals1), len(currentTrace) / samplerate + max(timeVals1), num=len(currentTrace)) timeVals3 = np.linspace(0 + max(timeVals2), len(after) / samplerate + max(timeVals2), num=len(after)) #plt.figure(figsize=(10, 6)) fig,ax=plt.subplots(figsize=(10, 6)) ax.plot(timeVals1, before, color='red') ax.plot(timeVals2, currentTrace) ax.plot(timeVals3, after, color='red') ax.set_xlabel('time (s)') ax.set_ylabel('current (A)') ax.xaxis.set_major_formatter(Time) ax.yaxis.set_major_formatter(Amp) if plotTitle: plt.title(plotTitle) plt.show() if __name__=='__main__': from tkinter import Tk from tkinter.filedialog import askopenfilenames, askdirectory matplotlib.use('TkAgg') if (platform.system() == 'Darwin'): root = Tk() root.withdraw() if (platform.system() == 'Darwin'): os.system('''/usr/bin/osascript -e 'tell app "Finder" to set frontmost of process "python" to true' ''') parser = argparse.ArgumentParser() parser.add_argument('-i', '--input', help='Input file') args = parser.parse_args() inputData = args.input if inputData == None: inputData = askopenfilenames(filetypes=[('data files', '*.dat')]) #for Mac systems, replace 'Data*.dat' with >> '*.dat' #if inputData: # inputData=os.path.splitext(inputData[0])[0] if (platform.system() == 'Darwin'): root.update() translocationEvents = NC.AllEvents() if inputData: for filename in inputData: shelfFile = shelve.open(os.path.splitext(filename)[0]) translocationEventstemp = shelfFile['TranslocationEvents'] shelfFile.close() translocationEvents.AddEvent(translocationEventstemp) PlotG_tau(translocationEvents, savefile=inputData)