Homec4science
Diffusion GYACOMO (OBSOLETE: LATEST VERSION ON gitlab.epfl.ch) (divided_output) Browse

gyacomo/matlab/compile_results.m
3b26011b21fedivided_output

Last Change
Raw File

compile_results.m
View Options

function [DATA] = compile_results(DIRECTORY,JOBNUMMIN,JOBNUMMAX)
DATA = {};
CONTINUE = 1;
JOBNUM = JOBNUMMIN; JOBFOUND = 0;
DATA.TJOB_SE = []; % Start and end times of jobs
DATA.NU_EVOL = []; % evolution of parameter nu between jobs
DATA.CO_EVOL = []; % evolution of CO
DATA.MUx_EVOL = []; % evolution of parameter mu between jobs
DATA.MUy_EVOL = []; % evolution of parameter mu between jobs
DATA.K_N_EVOL = []; %
DATA.L_EVOL = []; %
DATA.DT_EVOL = []; %
% FIELDS
Nipj_ = []; Nepj_ = [];
Ni00_ = []; Ne00_ = [];
HFLUX_ = [];
GGAMMA_ = [];
PGAMMA_ = [];
PHI_ = [];
DENS_E_ = [];
DENS_I_ = [];
TEMP_E_ = [];
TEMP_I_ = [];
Ts0D_ = [];
Ts3D_ = [];
Ts5D_ = [];
Sipj_ = []; Sepj_ = [];
Pe_old = 1e9; Pi_old = Pe_old; Je_old = Pe_old; Ji_old = Pe_old;
Pi_max=0; Pe_max=0; Ji_max=0; Je_max=0;
while(CONTINUE)
filename = sprintf([DIRECTORY,'outputs_%.2d.h5'],JOBNUM);
if (exist(filename, 'file') == 2 && JOBNUM <= JOBNUMMAX)
% Load results of simulation #JOBNUM
% load_results
%% load results %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
disp(['Loading ',filename])
% Loading from output file
CPUTIME = h5readatt(filename,'/data/input','cpu_time');
DT_SIM = h5readatt(filename,'/data/input','dt');
[Pe, Je, Pi, Ji, kx, ky, z] = load_grid_data(filename);
W_GAMMA = strcmp(h5readatt(filename,'/data/input','write_gamma'),'y');
W_HF = 0;%strcmp(h5readatt(filename,'/data/input','write_hf' ),'y');
W_PHI = strcmp(h5readatt(filename,'/data/input','write_phi' ),'y');
W_NA00 = strcmp(h5readatt(filename,'/data/input','write_Na00' ),'y');
W_NAPJ = strcmp(h5readatt(filename,'/data/input','write_Napj' ),'y');
W_SAPJ = 0;%strcmp(h5readatt(filename,'/data/input','write_Sapj' ),'y');
W_DENS = strcmp(h5readatt(filename,'/data/input','write_dens' ),'y');
W_TEMP = strcmp(h5readatt(filename,'/data/input','write_temp' ),'y');
KIN_E = strcmp(h5readatt(filename,'/data/input', 'KIN_E' ),'y');
% KIN_E = 1;
% Check polynomials degrees
Pe_new= numel(Pe); Je_new= numel(Je);
Pi_new= numel(Pi); Ji_new= numel(Ji);
if(Pe_max < Pe_new); Pe_max = Pe_new; end;
if(Je_max < Je_new); Je_max = Je_new; end;
if(Pi_max < Pi_new); Pi_max = Pi_new; end;
if(Ji_max < Ji_new); Ji_max = Ji_new; end;
% If a degree is larger than previous job, put them in a larger array
if (sum([Pe_new, Je_new, Pi_new, Ji_new]>[Pe_old, Je_old, Pi_old, Ji_old]) >= 1)
if W_NAPJ
tmp = Nipj_; sz = size(tmp);
Nipj_ = zeros(cat(1,[Pi_new,Ji_new]',sz(3:end)')');
Nipj_(1:Pi_old,1:Ji_old,:,:,:) = tmp;
tmp = Nepj_; sz = size(tmp);
Nepj_ = zeros(cat(1,[Pe_new,Je_new]',sz(3:end)')');
Nepj_(1:Pe_old,1:Je_old,:,:,:) = tmp;
end
if W_SAPJ
tmp = Sipj_; sz = size(tmp);
Sipj_ = zeros(cat(1,[Pi_new,Ji_new]',sz(3:end)')');
Sipj_(1:Pi_old,1:Ji_old,:,:,:) = tmp;
tmp = Sepj_; sz = size(tmp);
Sepj_ = zeros(cat(1,[Pe_new,Je_new]',sz(3:end)')');
Sepj_(1:Pe_old,1:Je_old,:,:,:) = tmp;
end
% If a degree is smaller than previous job, put zero to add. deg.
elseif (sum([Pe_new, Je_new, Pi_new, Ji_new]<[Pe_old, Je_old, Pi_old, Ji_old]) >= 1 && Pe_old ~= 1e9)
if W_NAPJ
tmp = Nipj; sz = size(tmp);
Nipj = zeros(cat(1,[Pi_max,Ji_max]',sz(3:end)')');
Nipj(1:Pi_new,1:Ji_new,:,:,:) = tmp;
tmp = Nepj; sz = size(tmp);
Nepj = zeros(cat(1,[Pe_max,Je_max]',sz(3:end)')');
Nepj(1:Pe_new,1:Je_new,:,:,:) = tmp;
end
if W_SAPJ
tmp = Sipj; sz = size(tmp);
Sipj = zeros(cat(1,[Pi_max,Ji_max]',sz(3:end)')');
Sipj(1:Pi_new,1:Ji_new,:,:,:) = tmp;
tmp = Sepj; sz = size(tmp);
Sepj = zeros(cat(1,[Pe_max,Je_max]',sz(3:end)')');
Sepj(1:Pe_new,1:Je_new,:,:,:) = tmp;
end
end
if W_GAMMA
[ GGAMMA_RI, Ts0D, ~] = load_0D_data(filename, 'gflux_ri');
PGAMMA_RI = load_0D_data(filename, 'pflux_ri');
GGAMMA_ = cat(1,GGAMMA_,GGAMMA_RI); clear GGAMMA_RI
PGAMMA_ = cat(1,PGAMMA_,PGAMMA_RI); clear PGAMMA_RI
end
if W_HF
[ HFLUX_X, Ts0D, ~] = load_0D_data(filename, 'hflux_x');
HFLUX_ = cat(1,HFLUX_,HFLUX_X); clear HFLUX_X
end
if W_PHI
[ PHI, Ts3D, ~] = load_3D_data(filename, 'phi');
PHI_ = cat(4,PHI_,PHI); clear PHI
end
if W_NA00
if KIN_E
Ne00 = load_3D_data(filename, 'Ne00');
Ne00_ = cat(4,Ne00_,Ne00); clear Ne00
end
[Ni00, Ts3D, ~] = load_3D_data(filename, 'Ni00');
Ni00_ = cat(4,Ni00_,Ni00); clear Ni00
end
if W_DENS
if KIN_E
[DENS_E, Ts3D, ~] = load_3D_data(filename, 'dens_e');
DENS_E_ = cat(4,DENS_E_,DENS_E); clear DENS_E
end
[DENS_I, Ts3D, ~] = load_3D_data(filename, 'dens_i');
DENS_I_ = cat(4,DENS_I_,DENS_I); clear DENS_I
end
if W_TEMP
if KIN_E
[TEMP_E, Ts3D, ~] = load_3D_data(filename, 'temp_e');
TEMP_E_ = cat(4,TEMP_E_,TEMP_E); clear TEMP_E
end
[TEMP_I, Ts3D, ~] = load_3D_data(filename, 'temp_i');
TEMP_I_ = cat(4,TEMP_I_,TEMP_I); clear TEMP_I
end
Ts5D = [];
if W_NAPJ
[Nipj, Ts5D, ~] = load_5D_data(filename, 'moments_i');
Nipj_ = cat(6,Nipj_,Nipj); clear Nipj
if KIN_E
Nepj = load_5D_data(filename, 'moments_e');
Nepj_ = cat(6,Nepj_,Nepj); clear Nepj
end
end
if W_SAPJ
Sipj_ = cat(6,Sipj_,Sipj);
if KIN_E
Sepj_ = cat(6,Sepj_,Sepj);
end
end
Ts0D_ = cat(1,Ts0D_,Ts0D);
Ts3D_ = cat(1,Ts3D_,Ts3D);
Ts5D_ = cat(1,Ts5D_,Ts5D);
% Evolution of simulation parameters
load_params
DATA.TJOB_SE = [DATA.TJOB_SE Ts0D(1) Ts0D(end)];
DATA.NU_EVOL = [DATA.NU_EVOL DATA.NU DATA.NU];
DATA.CO_EVOL = [DATA.CO_EVOL DATA.CO DATA.CO];
DATA.MUx_EVOL = [DATA.MUx_EVOL DATA.MUx DATA.MUx];
DATA.MUy_EVOL = [DATA.MUy_EVOL DATA.MUy DATA.MUy];
DATA.K_N_EVOL = [DATA.K_N_EVOL DATA.K_N DATA.K_N];
DATA.L_EVOL = [DATA.L_EVOL DATA.L DATA.L];
DATA.DT_EVOL = [DATA.DT_EVOL DATA.DT_SIM DATA.DT_SIM];
JOBFOUND = JOBFOUND + 1;
LASTJOB = JOBNUM;
Pe_old = Pe_new; Je_old = Je_new;
Pi_old = Pi_new; Ji_old = Ji_new;
elseif (JOBNUM > JOBNUMMAX)
CONTINUE = 0;
disp(['found ',num2str(JOBFOUND),' results']);
end
JOBNUM = JOBNUM + 1;
end
%% Build grids
Nkx = numel(kx); Nky = numel(ky);
[KY,KX] = meshgrid(ky,kx);
Lkx = max(kx)-min(kx); Lky = max(ky)-min(ky);
dkx = Lkx/(Nkx-1); dky = Lky/(Nky-1);
KPERP2 = KY.^2+KX.^2;
[~,ikx0] = min(abs(kx)); [~,iky0] = min(abs(ky));
Nx = 2*(Nkx-1); Ny = Nky; Nz = numel(z);
Lx = 2*pi/dkx; Ly = 2*pi/dky;
dx = Lx/Nx; dy = Ly/Ny; dz = 2*pi/Nz;
x = dx*(-Nx/2:(Nx/2-1)); Lx = max(x)-min(x);
y = dy*(-Ny/2:(Ny/2-1)); Ly = max(y)-min(y);
%% Add everything in output structure
% Fields
DATA.GGAMMA_RI = GGAMMA_; DATA.PGAMMA_RI = PGAMMA_; DATA.HFLUX_X = HFLUX_;
DATA.Nipj = Nipj_; DATA.Ni00 = Ni00_; DATA.DENS_I = DENS_I_; DATA.TEMP_I = TEMP_I_;
if(KIN_E)
DATA.Nepj = Nepj_; DATA.Ne00 = Ne00_; DATA.DENS_E = DENS_E_; DATA.TEMP_E = TEMP_E_;
end
DATA.Ts5D = Ts5D_; DATA.Ts3D = Ts3D_; DATA.Ts0D = Ts0D_;
DATA.PHI = PHI_;
% grids
DATA.Pe = Pe; DATA.Pi = Pi;
DATA.Je = Je; DATA.Ji = Ji;
DATA.kx = kx; DATA.ky = ky; DATA.z = z;
DATA.x = x; DATA.y = y;
DATA.ikx0 = ikx0; DATA.iky0 = iky0;
DATA.Nx = Nx; DATA.Ny = Ny; DATA.Nz = Nz; DATA.Nkx = Nkx; DATA.Nky = Nky;
DATA.Pmaxe = numel(Pe); DATA.Pmaxi = numel(Pi); DATA.Jmaxe = numel(Je); DATA.Jmaxi = numel(Ji);
DATA.dir = DIRECTORY;
DATA.localdir = ['..',DIRECTORY(20:end)];
DATA.param_title=['$\nu_{',DATA.CONAME,'}=$', num2str(DATA.NU), ...
', $\kappa_N=$',num2str(DATA.K_N),', $L=',num2str(DATA.L),'$, $N=',...
num2str(DATA.Nx),'$, $(P,J)=(',num2str(DATA.PMAXI),',',...
num2str(DATA.JMAXI),')$,',' $\mu_{hd}=$(',num2str(DATA.MUx),...
',',num2str(DATA.MUy),')'];
JOBNUM = LASTJOB;
filename = sprintf([DIRECTORY,'outputs_%.2d.h5'],JOBNUM);
end
c4science · Help