Homec4science
Diffusion GYACOMO (OBSOLETE: LATEST VERSION ON gitlab.epfl.ch) (divided_output) Browse

gyacomo/src/basic_mod.F90
3f25a0efc43cdivided_output

Last Change
Raw File

basic_mod.F90
View Options

MODULE basic
! Basic module for time dependent problems
use, intrinsic :: iso_c_binding
use prec_const
IMPLICIT none
! INCLUDE 'fftw3-mpi.f03'
INTEGER :: nrun = 1 ! Number of time steps to run
real(dp) :: tmax = 100000.0 ! Maximum simulation time
real(dp) :: dt = 1.0 ! Time step
real(dp) :: time = 0 ! Current simulation time (Init from restart file)
INTEGER :: comm0 ! Default communicator with a topology
INTEGER :: rank_0 ! Ranks in comm0
! Communicators for 1-dim cartesian subgrids of comm0
INTEGER :: comm_p, comm_ky, comm_z
INTEGER :: rank_p, rank_ky, rank_z! Ranks
INTEGER :: comm_pz, rank_pz ! 2D comm for N_a(p,j,z) output (mspfile)
INTEGER :: comm_kyz, rank_kyz ! 2D comm for N_a(p,j,z) output (mspfile)
INTEGER :: jobnum = 0 ! Job number
INTEGER :: step = 0 ! Calculation step of this run
INTEGER :: cstep = 0 ! Current step number (Init from restart file)
LOGICAL :: nlend = .FALSE. ! Signal end of run
LOGICAL :: crashed = .FALSE. ! Signal end of crashed run
INTEGER :: ierr ! flag for MPI error
INTEGER :: my_id ! Rank in COMM_WORLD
INTEGER :: num_procs ! number of MPI processes
INTEGER :: num_procs_p ! Number of processes in p
INTEGER :: num_procs_ky ! Number of processes in r
INTEGER :: num_procs_z ! Number of processes in z
INTEGER :: nbr_L, nbr_R ! Left and right neighbours (along p)
INTEGER :: nbr_T, nbr_B ! Top and bottom neighbours (along kx)
INTEGER :: nbr_U, nbr_D ! Upstream and downstream neighbours (along z)
INTEGER :: iframe0d ! counting the number of times 0d datasets are outputed (for diagnose)
INTEGER :: iframe1d ! counting the number of times 1d datasets are outputed (for diagnose)
INTEGER :: iframe2d ! counting the number of times 2d datasets are outputed (for diagnose)
INTEGER :: iframe3d ! counting the number of times 3d datasets are outputed (for diagnose)
INTEGER :: iframe5d ! counting the number of times 5d datasets are outputed (for diagnose)
! List of logical file units
INTEGER :: lu_in = 90 ! File duplicated from STDIN
INTEGER :: lu_stop = 91 ! stop file, see subroutine TESEND
! To measure computation time
real :: start, finish
real(dp) :: t0_rhs, t0_adv_field, t0_poisson, t0_Sapj, t0_diag, t0_checkfield,&
t0_step, t0_clos, t0_ghost, t0_coll, t0_process
real(dp) :: t1_rhs, t1_adv_field, t1_poisson, t1_Sapj, t1_diag, t1_checkfield,&
t1_step, t1_clos, t1_ghost, t1_coll, t1_process
real(dp) :: tc_rhs, tc_adv_field, tc_poisson, tc_Sapj, tc_diag, tc_checkfield,&
tc_step, tc_clos, tc_ghost, tc_coll, tc_process
real(dp) :: maxruntime = 1e9 ! Maximum simulation CPU time
INTERFACE allocate_array
MODULE PROCEDURE allocate_array_dp1,allocate_array_dp2,allocate_array_dp3,allocate_array_dp4, allocate_array_dp5, allocate_array_dp6
MODULE PROCEDURE allocate_array_dc1,allocate_array_dc2,allocate_array_dc3,allocate_array_dc4, allocate_array_dc5, allocate_array_dc6
MODULE PROCEDURE allocate_array_i1,allocate_array_i2,allocate_array_i3,allocate_array_i4
MODULE PROCEDURE allocate_array_l1,allocate_array_l2,allocate_array_l3,allocate_array_l4
END INTERFACE allocate_array
CONTAINS
!================================================================================
SUBROUTINE basic_data
! Read basic data for input file
use prec_const
IMPLICIT NONE
CALL find_input_file
NAMELIST /BASIC/ nrun, dt, tmax, maxruntime
READ(lu_in,basic)
!Init cumulative timers
tc_rhs = 0.;tc_adv_field = 0.; tc_poisson = 0.
tc_Sapj = 0.; tc_diag = 0.; tc_checkfield = 0.
END SUBROUTINE basic_data
SUBROUTINE basic_outputinputs(fid, str)
!
! Write the input parameters to the results_xx.h5 file
!
USE prec_const
USE futils, ONLY: attach
IMPLICIT NONE
INTEGER, INTENT(in) :: fid
CHARACTER(len=256), INTENT(in) :: str
CALL attach(fid, TRIM(str), "start_iframe0d", iframe0d)
CALL attach(fid, TRIM(str), "start_iframe2d", iframe2d)
CALL attach(fid, TRIM(str), "start_iframe3d", iframe3d)
CALL attach(fid, TRIM(str), "start_iframe5d", iframe5d)
CALL attach(fid, TRIM(str), "start_time", time)
CALL attach(fid, TRIM(str), "start_cstep", cstep-1)
CALL attach(fid, TRIM(str), "dt", dt)
CALL attach(fid, TRIM(str), "tmax", tmax)
CALL attach(fid, TRIM(str), "nrun", nrun)
CALL attach(fid, TRIM(str), "cpu_time", -1)
CALL attach(fid, TRIM(str), "Nproc", num_procs)
CALL attach(fid, TRIM(str), "Np_p" , num_procs_p)
CALL attach(fid, TRIM(str), "Np_kx",num_procs_ky)
CALL attach(fid, TRIM(str), "Np_z", num_procs_z)
END SUBROUTINE basic_outputinputs
!================================================================================
SUBROUTINE find_input_file
IMPLICIT NONE
CHARACTER(len=32) :: str, input_file
INTEGER :: nargs, fileid, l
LOGICAL :: mlexist
nargs = COMMAND_ARGUMENT_COUNT()
IF((nargs .EQ. 1) .OR. (nargs .EQ. 4)) THEN
CALL GET_COMMAND_ARGUMENT(nargs, str, l, ierr)
READ(str(1:l),'(i3)') fileid
WRITE(input_file,'(a,a1,i2.2,a3)') 'fort','_',fileid,'.90'
INQUIRE(file=input_file, exist=mlexist)
IF( mlexist ) THEN
IF(my_id.EQ.0) write(*,*) 'Reading input ', input_file,'...'
OPEN(lu_in, file=input_file)
ELSE
IF(my_id.EQ.0) write(*,*) 'Reading input fort.90...'
OPEN(lu_in, file='fort.90')
ENDIF
ENDIF
END SUBROUTINE find_input_file
!================================================================================
SUBROUTINE daytim(str)
! Print date and time
use prec_const
IMPLICIT NONE
CHARACTER(len=*) , INTENT(in) :: str
CHARACTER(len=16) :: d, t, dat, time
!________________________________________________________________________________
!
CALL DATE_AND_TIME(d,t)
dat=d(7:8) // '/' // d(5:6) // '/' // d(1:4)
time=t(1:2) // ':' // t(3:4) // ':' // t(5:10)
WRITE(*,'(a,1x,a,1x,a)') str, dat(1:10), time(1:12)
!
END SUBROUTINE daytim
!================================================================================
SUBROUTINE display_h_min_s(time)
real :: time
integer :: days, hours, mins, secs
days = FLOOR(time/24./3600.);
hours= FLOOR(time/3600.);
mins = FLOOR(time/60.);
secs = FLOOR(time);
IF ( days .GT. 0 ) THEN !display day h min s
hours = (time/3600./24. - days) * 24
mins = (time/3600. - days*24. - hours) * 60
secs = (time/60. - days*24.*60 - hours*60 - mins) * 60
WRITE(*,*) 'CPU Time = ', days, '[day]', hours, '[h]', mins, '[min]', secs, '[s]'
WRITE(*,*) '(',time,'[s])'
ELSEIF ( hours .GT. 0 ) THEN !display h min s
mins = (time/3600. - hours) * 60
secs = (time/60. - hours*60 - mins) * 60
WRITE(*,*) 'CPU Time = ', hours, '[h]', mins, '[min]', secs, '[s]'
WRITE(*,*) '(',time,'[s])'
ELSEIF ( mins .GT. 0 ) THEN !display min s
secs = (time/60. - mins) * 60
WRITE(*,*) 'CPU Time = ', mins, '[min]', secs, '[s]'
WRITE(*,*) '(',time,'[s])'
ELSE ! display s
WRITE(*,*) 'CPU Time = ', FLOOR(time), '[s]'
ENDIF
END SUBROUTINE display_h_min_s
!================================================================================
! To allocate arrays of doubles, integers, etc. at run time
SUBROUTINE allocate_array_dp1(a,is1,ie1)
IMPLICIT NONE
real(dp), DIMENSION(:), ALLOCATABLE, INTENT(INOUT) :: a
INTEGER, INTENT(IN) :: is1,ie1
ALLOCATE(a(is1:ie1))
a=0.0_dp
END SUBROUTINE allocate_array_dp1
SUBROUTINE allocate_array_dp2(a,is1,ie1,is2,ie2)
IMPLICIT NONE
real(dp), DIMENSION(:,:), ALLOCATABLE, INTENT(INOUT) :: a
INTEGER, INTENT(IN) :: is1,ie1,is2,ie2
ALLOCATE(a(is1:ie1,is2:ie2))
a=0.0_dp
END SUBROUTINE allocate_array_dp2
SUBROUTINE allocate_array_dp3(a,is1,ie1,is2,ie2,is3,ie3)
IMPLICIT NONE
real(dp), DIMENSION(:,:,:), ALLOCATABLE, INTENT(INOUT) :: a
INTEGER, INTENT(IN) :: is1,ie1,is2,ie2,is3,ie3
ALLOCATE(a(is1:ie1,is2:ie2,is3:ie3))
a=0.0_dp
END SUBROUTINE allocate_array_dp3
SUBROUTINE allocate_array_dp4(a,is1,ie1,is2,ie2,is3,ie3,is4,ie4)
IMPLICIT NONE
real(dp), DIMENSION(:,:,:,:), ALLOCATABLE, INTENT(INOUT) :: a
INTEGER, INTENT(IN) :: is1,ie1,is2,ie2,is3,ie3,is4,ie4
ALLOCATE(a(is1:ie1,is2:ie2,is3:ie3,is4:ie4))
a=0.0_dp
END SUBROUTINE allocate_array_dp4
SUBROUTINE allocate_array_dp5(a,is1,ie1,is2,ie2,is3,ie3,is4,ie4,is5,ie5)
IMPLICIT NONE
real(dp), DIMENSION(:,:,:,:,:), ALLOCATABLE, INTENT(INOUT) :: a
INTEGER, INTENT(IN) :: is1,ie1,is2,ie2,is3,ie3,is4,ie4,is5,ie5
ALLOCATE(a(is1:ie1,is2:ie2,is3:ie3,is4:ie4,is5:ie5))
a=0.0_dp
END SUBROUTINE allocate_array_dp5
SUBROUTINE allocate_array_dp6(a,is1,ie1,is2,ie2,is3,ie3,is4,ie4,is5,ie5,is6,ie6)
IMPLICIT NONE
real(dp), DIMENSION(:,:,:,:,:,:), ALLOCATABLE, INTENT(INOUT) :: a
INTEGER, INTENT(IN) :: is1,ie1,is2,ie2,is3,ie3,is4,ie4,is5,ie5,is6,ie6
ALLOCATE(a(is1:ie1,is2:ie2,is3:ie3,is4:ie4,is5:ie5,is6:ie6))
a=0.0_dp
END SUBROUTINE allocate_array_dp6
!========================================
SUBROUTINE allocate_array_dc1(a,is1,ie1)
IMPLICIT NONE
DOUBLE COMPLEX, DIMENSION(:), ALLOCATABLE, INTENT(INOUT) :: a
INTEGER, INTENT(IN) :: is1,ie1
ALLOCATE(a(is1:ie1))
a=CMPLX(0.0_dp,0.0_dp)
END SUBROUTINE allocate_array_dc1
SUBROUTINE allocate_array_dc2(a,is1,ie1,is2,ie2)
IMPLICIT NONE
DOUBLE COMPLEX, DIMENSION(:,:), ALLOCATABLE, INTENT(INOUT) :: a
INTEGER, INTENT(IN) :: is1,ie1,is2,ie2
ALLOCATE(a(is1:ie1,is2:ie2))
a=CMPLX(0.0_dp,0.0_dp)
END SUBROUTINE allocate_array_dc2
SUBROUTINE allocate_array_dc3(a,is1,ie1,is2,ie2,is3,ie3)
IMPLICIT NONE
DOUBLE COMPLEX, DIMENSION(:,:,:), ALLOCATABLE, INTENT(INOUT) :: a
INTEGER, INTENT(IN) :: is1,ie1,is2,ie2,is3,ie3
ALLOCATE(a(is1:ie1,is2:ie2,is3:ie3))
a=CMPLX(0.0_dp,0.0_dp)
END SUBROUTINE allocate_array_dc3
SUBROUTINE allocate_array_dc4(a,is1,ie1,is2,ie2,is3,ie3,is4,ie4)
IMPLICIT NONE
DOUBLE COMPLEX, DIMENSION(:,:,:,:), ALLOCATABLE, INTENT(INOUT) :: a
INTEGER, INTENT(IN) :: is1,ie1,is2,ie2,is3,ie3,is4,ie4
ALLOCATE(a(is1:ie1,is2:ie2,is3:ie3,is4:ie4))
a=CMPLX(0.0_dp,0.0_dp)
END SUBROUTINE allocate_array_dc4
SUBROUTINE allocate_array_dc5(a,is1,ie1,is2,ie2,is3,ie3,is4,ie4,is5,ie5)
IMPLICIT NONE
DOUBLE COMPLEX, DIMENSION(:,:,:,:,:), ALLOCATABLE, INTENT(INOUT) :: a
INTEGER, INTENT(IN) :: is1,ie1,is2,ie2,is3,ie3,is4,ie4,is5,ie5
ALLOCATE(a(is1:ie1,is2:ie2,is3:ie3,is4:ie4,is5:ie5))
a=CMPLX(0.0_dp,0.0_dp)
END SUBROUTINE allocate_array_dc5
SUBROUTINE allocate_array_dc6(a,is1,ie1,is2,ie2,is3,ie3,is4,ie4,is5,ie5,is6,ie6)
IMPLICIT NONE
DOUBLE COMPLEX, DIMENSION(:,:,:,:,:,:), ALLOCATABLE, INTENT(INOUT) :: a
INTEGER, INTENT(IN) :: is1,ie1,is2,ie2,is3,ie3,is4,ie4,is5,ie5,is6,ie6
ALLOCATE(a(is1:ie1,is2:ie2,is3:ie3,is4:ie4,is5:ie5,is6:ie6))
a=CMPLX(0.0_dp,0.0_dp)
END SUBROUTINE allocate_array_dc6
!========================================
SUBROUTINE allocate_array_i1(a,is1,ie1)
IMPLICIT NONE
INTEGER, DIMENSION(:), ALLOCATABLE, INTENT(INOUT) :: a
INTEGER, INTENT(IN) :: is1,ie1
ALLOCATE(a(is1:ie1))
a=0
END SUBROUTINE allocate_array_i1
SUBROUTINE allocate_array_i2(a,is1,ie1,is2,ie2)
IMPLICIT NONE
INTEGER, DIMENSION(:,:), ALLOCATABLE, INTENT(INOUT) :: a
INTEGER, INTENT(IN) :: is1,ie1,is2,ie2
ALLOCATE(a(is1:ie1,is2:ie2))
a=0
END SUBROUTINE allocate_array_i2
SUBROUTINE allocate_array_i3(a,is1,ie1,is2,ie2,is3,ie3)
IMPLICIT NONE
INTEGER, DIMENSION(:,:,:), ALLOCATABLE, INTENT(INOUT) :: a
INTEGER, INTENT(IN) :: is1,ie1,is2,ie2,is3,ie3
ALLOCATE(a(is1:ie1,is2:ie2,is3:ie3))
a=0
END SUBROUTINE allocate_array_i3
SUBROUTINE allocate_array_i4(a,is1,ie1,is2,ie2,is3,ie3,is4,ie4)
IMPLICIT NONE
INTEGER, DIMENSION(:,:,:,:), ALLOCATABLE, INTENT(INOUT) :: a
INTEGER, INTENT(IN) :: is1,ie1,is2,ie2,is3,ie3,is4,ie4
ALLOCATE(a(is1:ie1,is2:ie2,is3:ie3,is4:ie4))
a=0
END SUBROUTINE allocate_array_i4
SUBROUTINE allocate_array_i5(a,is1,ie1,is2,ie2,is3,ie3,is4,ie4,is5,ie5)
IMPLICIT NONE
real(dp), DIMENSION(:,:,:,:,:), ALLOCATABLE, INTENT(INOUT) :: a
INTEGER, INTENT(IN) :: is1,ie1,is2,ie2,is3,ie3,is4,ie4,is5,ie5
ALLOCATE(a(is1:ie1,is2:ie2,is3:ie3,is4:ie4,is5:ie5))
a=0
END SUBROUTINE allocate_array_i5
!========================================
SUBROUTINE allocate_array_l1(a,is1,ie1)
IMPLICIT NONE
LOGICAL, DIMENSION(:), ALLOCATABLE, INTENT(INOUT) :: a
INTEGER, INTENT(IN) :: is1,ie1
ALLOCATE(a(is1:ie1))
a=.false.
END SUBROUTINE allocate_array_l1
SUBROUTINE allocate_array_l2(a,is1,ie1,is2,ie2)
IMPLICIT NONE
LOGICAL, DIMENSION(:,:), ALLOCATABLE, INTENT(INOUT) :: a
INTEGER, INTENT(IN) :: is1,ie1,is2,ie2
ALLOCATE(a(is1:ie1,is2:ie2))
a=.false.
END SUBROUTINE allocate_array_l2
SUBROUTINE allocate_array_l3(a,is1,ie1,is2,ie2,is3,ie3)
IMPLICIT NONE
LOGICAL, DIMENSION(:,:,:), ALLOCATABLE, INTENT(INOUT) :: a
INTEGER, INTENT(IN) :: is1,ie1,is2,ie2,is3,ie3
ALLOCATE(a(is1:ie1,is2:ie2,is3:ie3))
a=.false.
END SUBROUTINE allocate_array_l3
SUBROUTINE allocate_array_l4(a,is1,ie1,is2,ie2,is3,ie3,is4,ie4)
IMPLICIT NONE
LOGICAL, DIMENSION(:,:,:,:), ALLOCATABLE, INTENT(INOUT) :: a
INTEGER, INTENT(IN) :: is1,ie1,is2,ie2,is3,ie3,is4,ie4
ALLOCATE(a(is1:ie1,is2:ie2,is3:ie3,is4:ie4))
a=.false.
END SUBROUTINE allocate_array_l4
SUBROUTINE allocate_array_l5(a,is1,ie1,is2,ie2,is3,ie3,is4,ie4,is5,ie5)
IMPLICIT NONE
LOGICAL, DIMENSION(:,:,:,:,:), ALLOCATABLE, INTENT(INOUT) :: a
INTEGER, INTENT(IN) :: is1,ie1,is2,ie2,is3,ie3,is4,ie4,is5,ie5
ALLOCATE(a(is1:ie1,is2:ie2,is3:ie3,is4:ie4,is5:ie5))
a=.false.
END SUBROUTINE allocate_array_l5
END MODULE basic
c4science · Help