Diffusion lammps (efficient_neuronet) Browse

fix_ave_time.html
787cc145e8e0efficient_neuronet

fix_ave_time.html
View Options

			<HTML>
			<CENTER><A HREF = "http://lammps.sandia.gov">LAMMPS WWW Site</A> - <A HREF = "Manual.html">LAMMPS Documentation</A> - <A HREF = "Section_commands.html#comm">LAMMPS Commands</A>
			</CENTER>






			<HR>

			<H3>fix ave/time command
			</H3>
			<P><B>Syntax:</B>
			</P>
			<PRE>fix ID group-ID ave/time Nevery Nrepeat Nfreq value1 value2 ... keyword args ...
			</PRE>
			<UL><LI>ID, group-ID are documented in <A HREF = "fix.html">fix</A> command

			<LI>ave/time = style name of this fix command

			<LI>Nevery = use input values every this many timesteps

			<LI>Nrepeat = # of times to use input values for calculating averages

			<LI>Nfreq = calculate averages every this many timesteps

			<LI>one or more input values can be listed

			<LI>value = c_ID, c_ID[N], f_ID, f_ID[N], v_name

			<PRE> c_ID = global scalar, vector, or array calculated by a compute with ID
			c_ID[I] = Ith component of global vector or Ith column of global array calculated by a compute with ID
			f_ID = global scalar, vector, or array calculated by a fix with ID
			f_ID[I] = Ith component of global vector or Ith column of global array calculated by a fix with ID
			v_name = global value calculated by an equal-style variable with name
			</PRE>
			<LI>zero or more keyword/arg pairs may be appended

			<LI>keyword = <I>mode</I> or <I>file</I> or <I>ave</I> or <I>start</I> or <I>off</I> or <I>overwrite</I> or <I>title1</I> or <I>title2</I> or <I>title3</I>

			<PRE> <I>mode</I> arg = <I>scalar</I> or <I>vector</I>
			scalar = all input values are global scalars
			vector = all input values are global vectors or global arrays
			<I>ave</I> args = <I>one</I> or <I>running</I> or <I>window M</I>
			one = output a new average value every Nfreq steps
			running = output cummulative average of all previous Nfreq steps
			window M = output average of M most recent Nfreq steps
			<I>start</I> args = Nstart
			Nstart = start averaging on this timestep
			<I>off</I> arg = M = do not average this value
			M = value # from 1 to Nvalues
			<I>file</I> arg = filename
			filename = name of file to output time averages to
			<I>overwrite</I> arg = none = overwrite output file with only latest output
			<I>format</I> arg = string
			string = C-style format string
			<I>title1</I> arg = string
			string = text to print as 1st line of output file
			<I>title2</I> arg = string
			string = text to print as 2nd line of output file
			<I>title3</I> arg = string
			string = text to print as 3rd line of output file, only for vector mode
			</PRE>

			</UL>
			<P><B>Examples:</B>
			</P>
			<PRE>fix 1 all ave/time 100 5 1000 c_myTemp c_thermo_temp file temp.profile
			fix 1 all ave/time 100 5 1000 c_thermo_press[2] ave window 20 &
			title1 "My output values"
			fix 1 all ave/time 1 100 1000 f_indent f_indent[1] file temp.indent off 1
			</PRE>
			<P><B>Description:</B>
			</P>
			<P>Use one or more global values as inputs every few timesteps, and
			average them over longer timescales. The resulting averages can be
			used by other <A HREF = "Section_howto.html#howto_15">output commands</A> such as
			<A HREF = "thermo_style.html">thermo_style custom</A>, and can also be written to a
			file. Note that if no time averaging is done, this command can be
			used as a convenient way to simply output one or more global values to
			a file.
			</P>
			<P>The group specified with this command is ignored. However, note that
			specified values may represent calculations performed by computes and
			fixes which store their own "group" definitions.
			</P>
			<P>Each listed value can be the result of a <A HREF = "compute.html">compute</A> or
			<A HREF = "fix.html">fix</A> or the evaluation of an equal-style
			<A HREF = "variable.html">variable</A>. In each case, the compute, fix, or variable
			must produce a global quantity, not a per-atom or local quantity. If
			you wish to spatial- or time-average or histogram per-atom quantities
			from a compute, fix, or variable, then see the <A HREF = "fix_ave_spatial.html">fix
			ave/spatial</A>, <A HREF = "fix_ave_atom.html">fix ave/atom</A>,
			or <A HREF = "fix_ave_histo.html">fix ave/histo</A> commands. If you wish to sum a
			per-atom quantity into a single global quantity, see the <A HREF = "compute_reduce.html">compute
			reduce</A> command.
			</P>
			<P><A HREF = "compute.html">Computes</A> that produce global quantities are those which
			do not have the word <I>atom</I> in their style name. Only a few
			<A HREF = "fix.html">fixes</A> produce global quantities. See the doc pages for
			individual fixes for info on which ones produce such values.
			<A HREF = "variable.html">Variables</A> of style <I>equal</I> are the only ones that can
			be used with this fix. Variables of style <I>atom</I> cannot be used,
			since they produce per-atom values.
			</P>
			<P>The input values must either be all scalars or all vectors (or
			arrays), depending on the setting of the <I>mode</I> keyword. In both
			cases, the averaging is performed independently on each input value.
			I.e. each input scalar is averaged independently and each element of
			each input vector (or array) is averaged independently.
			</P>
			<P>If <I>mode</I> = vector, then the input values may either be vectors or
			arrays and all must be the same "length", which is the length of the
			vector or number of rows in the array. If a global array is listed,
			then it is the same as if the individual columns of the array had been
			listed one by one. E.g. these 2 fix ave/time commands are equivalent,
			since the <A HREF = "compute_rdf.html">compute rdf</A> command creates, in this
			case, a global array with 3 columns, each of length 50:
			</P>
			<PRE>compute myRDF all rdf 50 1 2
			fix 1 all ave/time 100 1 100 c_myRDF file tmp1.rdf mode vector
			fix 2 all ave/time 100 1 100 c_myRDF[1] c_myRDF[2] c_myRDF[3] file tmp2.rdf mode vector
			</PRE>
			<HR>

			<P>The <I>Nevery</I>, <I>Nrepeat</I>, and <I>Nfreq</I> arguments specify on what
			timesteps the input values will be used in order to contribute to the
			average. The final averaged quantities are generated on timesteps
			that are a mlutiple of <I>Nfreq</I>. The average is over <I>Nrepeat</I>
			quantities, computed in the preceding portion of the simulation every
			<I>Nevery</I> timesteps. <I>Nfreq</I> must be a multiple of <I>Nevery</I> and
			<I>Nevery</I> must be non-zero even if <I>Nrepeat</I> is 1. Also, the timesteps
			contributing to the average value cannot overlap, i.e. Nfreq >
			(Nrepeat-1)*Nevery is required.
			</P>
			<P>For example, if Nevery=2, Nrepeat=6, and Nfreq=100, then values on
			timesteps 90,92,94,96,98,100 will be used to compute the final average
			on timestep 100. Similarly for timesteps 190,192,194,196,198,200 on
			timestep 200, etc. If Nrepeat=1 and Nfreq = 100, then no time
			averaging is done; values are simply generated on timesteps
			100,200,etc.
			</P>
			<HR>

			<P>If a value begins with "c_", a compute ID must follow which has been
			previously defined in the input script. If <I>mode</I> = scalar, then if
			no bracketed term is appended, the global scalar calculated by the
			compute is used. If a bracketed term is appended, the Ith element of
			the global vector calculated by the compute is used. If <I>mode</I> =
			vector, then if no bracketed term is appended, the global vector
			calculated by the compute is used. Or if the compute calculates an
			array, all of the columns of the global array are used as if they had
			been specified as individual vectors (see description above). If a
			bracketed term is appended, the Ith column of the global array
			calculated by the compute is used.
			</P>
			<P>Note that there is a <A HREF = "compute_reduce.html">compute reduce</A> command
			which can sum per-atom quantities into a global scalar or vector which
			can thus be accessed by fix ave/time. Or it can be a compute defined
			not in your input script, but by <A HREF = "thermo_style.html">thermodynamic
			output</A> or other fixes such as <A HREF = "fix_nh.html">fix
			nvt</A> or <A HREF = "fix_temp_rescale.html">fix temp/rescale</A>. See
			the doc pages for these commands which give the IDs of these computes.
			Users can also write code for their own compute styles and <A HREF = "Section_modify.html">add them
			to LAMMPS</A>.
			</P>
			<P>If a value begins with "f_", a fix ID must follow which has been
			previously defined in the input script. If <I>mode</I> = scalar, then if
			no bracketed term is appended, the global scalar calculated by the fix
			is used. If a bracketed term is appended, the Ith element of the
			global vector calculated by the fix is used. If <I>mode</I> = vector, then
			if no bracketed term is appended, the global vector calculated by the
			fix is used. Or if the fix calculates an array, all of the columns of
			the global array are used as if they had been specified as individual
			vectors (see description above). If a bracketed term is appended, the
			Ith column of the global array calculated by the fix is used.
			</P>
			<P>Note that some fixes only produce their values on certain timesteps,
			which must be compatible with <I>Nevery</I>, else an error will result.
			Users can also write code for their own fix styles and <A HREF = "Section_modify.html">add them to
			LAMMPS</A>.
			</P>
			<P>If a value begins with "v_", a variable name must follow which has
			been previously defined in the input script. Variables can only be
			used as input for <I>mode</I> = scalar. Only equal-style variables can be
			referenced. See the <A HREF = "variable.html">variable</A> command for details.
			Note that variables of style <I>equal</I> define a formula which can
			reference individual atom properties or thermodynamic keywords, or
			they can invoke other computes, fixes, or variables when they are
			evaluated, so this is a very general means of specifying quantities to
			time average.
			</P>
			<HR>

			<P>Additional optional keywords also affect the operation of this fix.
			</P>
			<P>If the <I>mode</I> keyword is set to <I>scalar</I>, then all input values must
			be global scalars, or elements of global vectors. If the <I>mode</I>
			keyword is set to <I>vector</I>, then all input values must be global
			vectors, or columns of global arrays. They can also be global arrays,
			which are converted into a series of global vectors (one per column),
			as explained above.
			</P>
			<P>The <I>ave</I> keyword determines how the values produced every <I>Nfreq</I>
			steps are averaged with values produced on previous steps that were
			multiples of <I>Nfreq</I>, before they are accessed by another output
			command or written to a file.
			</P>
			<P>If the <I>ave</I> setting is <I>one</I>, then the values produced on timesteps
			that are multiples of <I>Nfreq</I> are independent of each other; they are
			output as-is without further averaging.
			</P>
			<P>If the <I>ave</I> setting is <I>running</I>, then the values produced on
			timesteps that are multiples of <I>Nfreq</I> are summed and averaged in a
			cummulative sense before being output. Each output value is thus the
			average of the value produced on that timestep with all preceding
			values. This running average begins when the fix is defined; it can
			only be restarted by deleting the fix via the <A HREF = "unfix.html">unfix</A>
			command, or by re-defining the fix by re-specifying it.
			</P>
			<P>If the <I>ave</I> setting is <I>window</I>, then the values produced on
			timesteps that are multiples of <I>Nfreq</I> are summed and averaged within
			a moving "window" of time, so that the last M values are used to
			produce the output. E.g. if M = 3 and Nfreq = 1000, then the output
			on step 10000 will be the average of the individual values on steps
			8000,9000,10000. Outputs on early steps will average over less than M
			values if they are not available.
			</P>
			<P>The <I>start</I> keyword specifies what timestep averaging will begin on.
			The default is step 0. Often input values can be 0.0 at time 0, so
			setting <I>start</I> to a larger value can avoid including a 0.0 in a
			running or windowed average.
			</P>
			<P>The <I>off</I> keyword can be used to flag any of the input values. If a
			value is flagged, it will not be time averaged. Instead the most
			recent input value will always be stored and output. This is useful
			if one of more of the inputs produced by a compute or fix or variable
			are effectively constant or are simply current values. E.g. they are
			being written to a file with other time-averaged values for purposes
			of creating well-formatted output.
			</P>
			<P>The <I>file</I> keyword allows a filename to be specified. Every <I>Nfreq</I>
			steps, one quantity or vector of quantities is written to the file for
			each input value specified in the fix ave/time command. For <I>mode</I> =
			scalar, this means a single line is written each time output is
			performed. Thus the file ends up to be a series of lines, i.e. one
			column of numbers for each input value. For <I>mode</I> = vector, an array
			of numbers is written each time output is performed. The number of
			rows is the length of the input vectors, and the number of columns is
			the number of values. Thus the file ends up to be a series of these
			array sections.
			</P>
			<P>The <I>overwrite</I> keyword will continuously overwrite the output file
			with the latest output, so that it only contains one timestep worth of
			output. This option can only be used with the <I>ave running</I> setting.
			</P>
			<P>The <I>format</I> keyword sets the numeric format of each value when it is
			printed to a file via the <I>file</I> keyword. Note that all values are
			floating point quantities. The default format is %g. You can specify
			a higher precision if desired, e.g. %20.16g.
			</P>
			<P>The <I>title1</I> and <I>title2</I> and <I>title3</I> keywords allow specification of
			the strings that will be printed as the first 2 or 3 lines of the
			output file, assuming the <I>file</I> keyword was used. LAMMPS uses
			default values for each of these, so they do not need to be specified.
			</P>
			<P>By default, these header lines are as follows for <I>mode</I> = scalar:
			</P>
			<PRE># Time-averaged data for fix ID
			# TimeStep value1 value2 ...
			</PRE>
			<P>In the first line, ID is replaced with the fix-ID. In the second line
			the values are replaced with the appropriate fields from the fix
			ave/time command. There is no third line in the header of the file,
			so the <I>title3</I> setting is ignored when <I>mode</I> = scalar.
			</P>
			<P>By default, these header lines are as follows for <I>mode</I> = vector:
			</P>
			<PRE># Time-averaged data for fix ID
			# TimeStep Number-of-rows
			# Row value1 value2 ...
			</PRE>
			<P>In the first line, ID is replaced with the fix-ID. The second line
			describes the two values that are printed at the first of each section
			of output. In the third line the values are replaced with the
			appropriate fields from the fix ave/time command.
			</P>
			<HR>

			<P><B>Restart, fix_modify, output, run start/stop, minimize info:</B>
			</P>
			<P>No information about this fix is written to <A HREF = "restart.html">binary restart
			files</A>. None of the <A HREF = "fix_modify.html">fix_modify</A> options
			are relevant to this fix.
			</P>
			<P>This fix produces a global scalar or global vector or global array
			which can be accessed by various <A HREF = "Section_howto.html#howto_15">output
			commands</A>. The values can only be
			accessed on timesteps that are multiples of <I>Nfreq</I> since that is when
			averaging is performed.
			</P>
			<P>A scalar is produced if only a single input value is averaged and
			<I>mode</I> = scalar. A vector is produced if multiple input values are
			averaged for <I>mode</I> = scalar, or a single input value for <I>mode</I> =
			vector. In the first case, the length of the vector is the number of
			inputs. In the second case, the length of the vector is the same as
			the length of the input vector. An array is produced if multiple
			input values are averaged and <I>mode</I> = vector. The global array has #
			of rows = length of the input vectors and # of columns = number of
			inputs.
			</P>
			<P>If the fix prouduces a scalar or vector, then the scalar and each
			element of the vector can be either "intensive" or "extensive",
			depending on whether the values contributing to the scalar or vector
			element are "intensive" or "extensive". If the fix produces an array,
			then all elements in the array must be the same, either "intensive" or
			"extensive". If a compute or fix provides the value being time
			averaged, then the compute or fix determines whether the value is
			intensive or extensive; see the doc page for that compute or fix for
			further info. Values produced by a variable are treated as intensive.
			</P>
			<P>No parameter of this fix can be used with the <I>start/stop</I> keywords of
			the <A HREF = "run.html">run</A> command. This fix is not invoked during <A HREF = "minimize.html">energy
			minimization</A>.
			</P>
			<P><B>Restrictions:</B> none
			</P>
			<P><B>Related commands:</B>
			</P>
			<P><A HREF = "compute.html">compute</A>, <A HREF = "fix_ave_atom.html">fix ave/atom</A>, <A HREF = "fix_ave_spatial.html">fix
			ave/spatial</A>, <A HREF = "fix_ave_histo.html">fix ave/histo</A>,
			<A HREF = "variable.html">variable</A>, <A HREF = "fix_ave_correlate.html">fix ave/correlate</A>,
			</P>
			<P><B>Default:</B>
			</P>
			<P>The option defaults are mode = scalar, ave = one, start = 0, no file
			output, format = %g, title 1,2,3 = strings as described above, and no
			off settings for any input values.
			</P>
			</HTML>

lammps/doc/doc2/fix_ave_time.html787cc145e8e0efficient_neuronet

fix_ave_time.htmlView Options

lammps/doc/doc2/fix_ave_time.html
787cc145e8e0efficient_neuronet

fix_ave_time.html
View Options