Homec4science
Diffusion lammps (efficient_neuronet) Browse

lammps/doc/pair_lj.txt
b704a82dafc5efficient_neuronet

Last Change
Raw File

pair_lj.txt
View Options

"LAMMPS WWW Site"_lws - "LAMMPS Documentation"_ld - "LAMMPS Commands"_lc :c
:link(lws,http://lammps.sandia.gov)
:link(ld,Manual.html)
:link(lc,Section_commands.html#comm)
:line
pair_style lj/cut command :h3
pair_style lj/cut/opt command :h3
pair_style lj/cut/coul/cut command :h3
pair_style lj/cut/coul/debye command :h3
pair_style lj/cut/coul/long command :h3
pair_style lj/cut/coul/long/tip4p command :h3
[Syntax:]
pair_style style args :pre
style = {lj/cut} or {lj/cut/opt} or {lj/cut/coul/cut} or {lj/cut/coul/debye} \
or {lj/cut/coul/long} or {lj/cut/coul/long/tip4p}
args = list of arguments for a particular style :ul
{lj/cut} args = cutoff
cutoff = global cutoff for Lennard Jones interactions (distance units)
{lj/cut/opt} args = cutoff
cutoff = global cutoff for Lennard Jones interactions (distance units)
{lj/cut/coul/cut} args = cutoff (cutoff2)
cutoff = global cutoff for LJ (and Coulombic if only 1 arg) (distance units)
cutoff2 = global cutoff for Coulombic (optional) (distance units)
{lj/cut/coul/debye} args = kappa cutoff (cutoff2)
kappa = Debye length (inverse distance units)
cutoff = global cutoff for LJ (and Coulombic if only 1 arg) (distance units)
cutoff2 = global cutoff for Coulombic (optional) (distance units)
{lj/cut/coul/long} args = cutoff (cutoff2)
cutoff = global cutoff for LJ (and Coulombic if only 1 arg) (distance units)
cutoff2 = global cutoff for Coulombic (optional) (distance units)
{lj/cut/coul/long/tip4p} args = otype htype btype atype qdist cutoff (cutoff2)
otype,htype = atom types for TIP4P O and H
btype,atype = bond and angle types for TIP4P waters
qdist = distance from O atom to massless charge (distance units)
cutoff = global cutoff for LJ (and Coulombic if only 1 arg) (distance units)
cutoff2 = global cutoff for Coulombic (optional) (distance units) :pre
[Examples:]
pair_style lj/cut 2.5
pair_style lj/cut/opt 2.5
pair_coeff * * 1 1
pair_coeff 1 1 1 1.1 2.8 :pre
pair_style lj/cut/coul/cut 10.0
pair_style lj/cut/coul/cut 10.0 8.0
pair_coeff * * 100.0 3.0
pair_coeff 1 1 100.0 3.5 9.0
pair_coeff 1 1 100.0 3.5 9.0 9.0 :pre
pair_style lj/cut/coul/debye 1.5 3.0
pair_style lj/cut/coul/debye 1.5 2.5 5.0
pair_coeff * * 1.0 1.0
pair_coeff 1 1 1.0 1.5 2.5
pair_coeff 1 1 1.0 1.5 2.5 5.0 :pre
pair_style lj/cut/coul/long 10.0
pair_style lj/cut/coul/long 10.0 8.0
pair_coeff * * 100.0 3.0
pair_coeff 1 1 100.0 3.5 9.0 :pre
pair_style lj/cut/coul/long/tip4p 1 2 7 8 0.3 12.0
pair_style lj/cut/coul/long/tip4p 1 2 7 8 0.3 12.0 10.0
pair_coeff * * 100.0 3.0
pair_coeff 1 1 100.0 3.5 9.0 :pre
[Description:]
The {lj/cut} styles compute the standard 6/12 Lennard-Jones potential,
given by
:c,image(Eqs/pair_lj.jpg)
Rc is the cutoff.
Style {lj/cut/opt} is an optimized version of style {lj/cut} that
should give identical answers. Depending on system size and the
processor you are running on, it may be 5-25% faster (for the pairwise
portion of the run time).
Style {lj/cut/coul/cut} adds a Coulombic pairwise interaction given by
:c,image(Eqs/pair_coulomb.jpg)
where C is an energy-conversion constant, Qi and Qj are the charges on
the 2 atoms, and epsilon is the dielectric constant which can be set
by the "dielectric"_dielectric.html command. If one cutoff is
specified in the pair_style command, it is used for both the LJ and
Coulombic terms. If two cutoffs are specified, they are used as
cutoffs for the LJ and Coulombic terms respectively.
Style {lj/cut/coul/debye} adds an additional exp() damping factor
to the Coulombic term, given by
:c,image(Eqs/pair_debye.jpg)
where kappa is the Debye length. This potential is another way to
mimic the screening effect of a polar solvent.
Style {lj/cut/coul/long} computes the same Coulombic interactions as
style {lj/cut/coul/cut} except that an additional damping factor is
applied to the Coulombic term so it can be used in conjunction with
the "kspace_style"_kspace_style.html command and its {ewald} or {pppm}
option. The Coulombic cutoff specified for this style means that
pairwise interactions within this distance are computed directly;
interactions outside that distance are computed in K-space.
Style {lj/cut/coul/long/tip4p} implements the TIP4P water model of
"(Jorgensen)"_#Jorgensen, which introduces a massless site located a
short distance away from the oxygen atom along the bisector of the HOH
angle. The atomic types of the oxygen and hydrogen atoms, the bond
and angle types for OH and HOH interactions, and the distance to the
massless charge site are specified as pair_style arguments.
IMPORTANT NOTE: For each TIP4P water molecule in your system, the atom
IDs for the O and 2 H atoms must be consecutive, with the O atom
first. This is to enable LAMMPS to "find" the 2 H atoms associated
with each O atom. For example, if the atom ID of an O atom in a TIP4P
water molecule is 500, then its 2 H atoms must have IDs 501 and 502.
See the "howto section"_Section_howto.html#4_8 for more information on
how to use the TIP4P pair style.
The following coefficients must be defined for each pair of atoms
types via the "pair_coeff"_pair_coeff.html command as in the examples
above, or in the data file or restart files read by the
"read_data"_read_data.html or "read_restart"_read_restart.html
commands:
epsilon (energy units)
sigma (distance units)
cutoff1 (distance units)
cutoff2 (distance units) :ul
Note that sigma is defined in the LJ formula as the zero-crossing
distance for the potential, not as the energy minimum at 2^(1/6)
sigma.
The latter 2 coefficients are optional. If not specified, the global
LJ and Coulombic cutoffs specified in the pair_style command are used.
If only one cutoff is specified, it is used as the cutoff for both LJ
and Coulombic interactions for this type pair. If both coefficients
are specified, they are used as the LJ and Coulombic cutoffs for this
type pair. You cannot specify 2 cutoffs for style {lj/cut}, since it
has no Coulombic terms.
For {lj/cut/coul/long} and {lj/cut/coul/long/tip4p} only the LJ cutoff
can be specified since a Coulombic cutoff cannot be specified for an
individual I,J type pair. All type pairs use the same global
Coulombic cutoff specified in the pair_style command.
[Restrictions:]
The {lj/cut/coul/long} style is part of the "kspace" package. It is
only enabled if LAMMPS was built with that package. The {lj/cut/opt}
style is part of the "opt" package. It is only enabled if LAMMPS was
built with that package. See the "Making
LAMMPS"_Section_start.html#2_3 section for more info.
On some 64-bit machines, compiling with -O3 appears to break the
Coulombic tabling option used by the {lj/cut/coul/long} style. See
the "Additional build tips" section of the Making LAMMPS documentation
pages for workarounds on this issue.
[Related commands:]
"pair_coeff"_pair_coeff.html
[Default:] none
:line
:link(Jorgensen)
[(Jorgensen)] Jorgensen, Chandrasekhar, Madura, Impey, Klein, J Chem
Phys, 79, 926 (1983).
c4science · Help