Homec4science
Diffusion lammps (efficient_neuronet) Browse

lammps/doc/src/pair_awpmd.txt
df885d59ff66efficient_neuronet

Last Change
Raw File

pair_awpmd.txt
View Options

"LAMMPS WWW Site"_lws - "LAMMPS Documentation"_ld - "LAMMPS Commands"_lc :c
:link(lws,http://lammps.sandia.gov)
:link(ld,Manual.html)
:link(lc,Section_commands.html#comm)
:line
pair_style awpmd/cut command :h3
[Syntax:]
pair_style awpmd/cut Rc keyword value ... :pre
Rc = global cutoff, -1 means cutoff of half the shortest box length :ulb,l
zero or more keyword/value pairs may be appended :l
keyword = {hartree} or {dproduct} or {uhf} or {free} or {pbc} or {fix} or {harm} or {ermscale} or {flex_press} :l
{hartree} value = none
{dproduct} value = none
{uhf} value = none
{free} value = none
{pbc} value = Plen
Plen = periodic width of electron = -1 or positive value (distance units)
{fix} value = Flen
Flen = fixed width of electron = -1 or positive value (distance units)
{harm} value = width
width = harmonic width constraint
{ermscale} value = factor
factor = scaling between electron mass and width variable mass
{flex_press} value = none :pre
:ule
[Examples:]
pair_style awpmd/cut -1
pair_style awpmd/cut 40.0 uhf free
pair_coeff * *
pair_coeff 2 2 20.0 :pre
[Description:]
This pair style contains an implementation of the Antisymmetrized Wave
Packet Molecular Dynamics (AWPMD) method. Need citation here. Need
basic formulas here. Could be links to other documents.
Rc is the cutoff.
The pair_style command allows for several optional keywords
to be specified.
The {hartree}, {dproduct}, and {uhf} keywords specify the form of the
initial trial wave function for the system. If the {hartree} keyword
is used, then a Hartree multielectron trial wave function is used. If
the {dproduct} keyword is used, then a trial function which is a
product of two determinants for each spin type is used. If the {uhf}
keyword is used, then an unrestricted Hartree-Fock trial wave function
is used.
The {free}, {pbc}, and {fix} keywords specify a width constraint on
the electron wavepackets. If the {free} keyword is specified, then there is no
constraint. If the {pbc} keyword is used and {Plen} is specified as
-1, then the maximum width is half the shortest box length. If {Plen}
is a positive value, then the value is the maximum width. If the
{fix} keyword is used and {Flen} is specified as -1, then electrons
have a constant width that is read from the data file. If {Flen} is a
positive value, then the constant width for all electrons is set to
{Flen}.
The {harm} keyword allow oscillations in the width of the
electron wavepackets. More details are needed.
The {ermscale} keyword specifies a unitless scaling factor
between the electron masses and the width variable mass. More
details needed.
If the {flex_press} keyword is used, then a contribution from the
electrons is added to the total virial and pressure of the system.
This potential is designed to be used with "atom_style
wavepacket"_atom_style.html definitions, in order to handle the
description of systems with interacting nuclei and explicit electrons.
The following coefficients must be defined for each pair of atoms
types via the "pair_coeff"_pair_coeff.html command as in the examples
above, or in the data file or restart files read by the
"read_data"_read_data.html or "read_restart"_read_restart.html
commands, or by mixing as described below:
cutoff (distance units) :ul
For {awpmd/cut}, the cutoff coefficient is optional. If it is not
used (as in some of the examples above), the default global value
specified in the pair_style command is used.
:line
[Mixing, shift, table, tail correction, restart, rRESPA info]:
The "pair_modify"_pair_modify.html mix, shift, table, and tail options
are not relevant for this pair style.
This pair style writes its information to "binary restart
files"_restart.html, so pair_style and pair_coeff commands do not need
to be specified in an input script that reads a restart file.
This pair style can only be used via the {pair} keyword of the
"run_style respa"_run_style.html command. It does not support the
{inner}, {middle}, {outer} keywords.
:line
[Restrictions:] none
[Related commands:]
"pair_coeff"_pair_coeff.html
[Default:]
These are the defaults for the pair_style keywords: {hartree} for the
initial wavefunction, {free} for the wavepacket width.
c4science · Help