Homec4science
Diffusion lammps (efficient_neuronet) Browse

lammps/doc/src/tutorial_github.txt
3759b7e2ddc5efficient_neuronet

Last Change
Raw File

tutorial_github.txt
View Options

"LAMMPS WWW Site"_lws - "LAMMPS Documentation"_ld - "LAMMPS Commands"_lc :c
:link(lws,http://lammps.sandia.gov)
:link(ld,Manual.html)
:link(lc,Section_commands.html#comm)
:line
LAMMPS GitHub tutorial :h1
written by Stefan Paquay :h3
:line
This document briefly describes how to use GitHub to merge changes
into LAMMPS using GitHub. It assumes that you are familiar with
git. You may want to have a look at the "Git
book"_http://git-scm.com/book/ to reacquaint yourself.
:line
Making an account :h2
First of all, you need a GitHub account. This is fairly simple, just
go to "GitHub"_https://github.com and create an account by clicking
the ``Sign up for GitHub'' button. Once your account is created, you
can sign in by clicking the button in the top left and filling in your
username or e-mail address and password.
:line
Forking the repository :h2
To get changes into LAMMPS, you need to first fork the repository. At
the time of writing, LAMMPS-ICMS is the preferred fork. Go to "LAMMPS
on GitHub"_https://github.com/lammps/lammps and make sure branch is
set to ``lammps-icms'', see the figure below.
:c,image(JPG/tutorial_branch.png)
Now, click on fork in the top right corner:
:c,image(JPG/tutorial_fork.png)
This will create your own fork of the LAMMPS repository. You can make
changes in this fork and later file {pull requests} to allow the
upstream repository to merge changes from your own fork into the one
we just forked from. At the same time, you can set things up, so you
can include changes from upstream into your repository.
:line
Adding changes to your own fork :h2
Before adding changes, it is better to first create a new branch that
will contain these changes, a so-called feature branch.
Feature branches :h3
Since LAMMPS is such a big project and most user contributions come in
small portions, the most ideal workflow for LAMMPS is the so-called
``Feature branch'' workflow. It is explained in great detail here:
"feature branch
workflow"_https://www.atlassian.com/git/tutorials/comparing-workflows/feature-branch-workflow.
The idea is that every new feature for LAMMPS gets its own
branch. This way, it is fairly painless to incorporate new features
into the upstream repository. I will explain briefly here how to do
it. In this feature branch, I will add a USER-package.
I assume that git is installed on the local machine and you know how
to use a command line.
First of all, you need to clone your own fork of LAMMPS:
$ git clone https://github.com/<your user name>/lammps.git :pre
You can find the proper url to the right of the "HTTPS" block, see figure.
:c,image(JPG/tutorial_https_block.png)
The above command copies (``clones'') the git repository to your local
machine. You can use this local clone to make changes and test them
without interfering with the repository on github. First, however, it
is recommended to make a new branch for a particular feature you would
like added to LAMMPS. In this example, I will try adding a new
USER-package called USER-MANIFOLD.
To create a new branch, run the following git command in your repository:
$ git checkout -b add-user-manifold :pre
The name of this new branch is "add-user-manifold" in my case. Just
name it after something that resembles the feature you want added to
LAMMPS.
Now that you've changed branches, you can edit the files as you see
fit, add new files, and commit as much as you would like. Just
remember that if halfway you decide to add another, unrelated feature,
you should switch branches!
After everything is done, add the files to the branch and commit them:
$ git add src/USER-MANIFOLD examples/USER/manifold/
$ git add doc/fix_nv{t,e}_manifold_rattle.txt
$ git add doc/fix_manifoldforce.txt doc/user_manifolds.txt :pre
After the files are added, the change should be comitted:
$ git commit -m 'Added user-manifold package' :pre
The "-m" switch is used to add a message to the commit. Use this to
indicate what type of change was commited.
Wisdom by Axel: :h4
{"Do not use "git commit -a". the -a flag will automatically include
*all* modified or new files. mercurial does that and it find it
hugely annoying and often leading to accidental commits of files you
don't want. use git add, git rm, git mv for adding, removing,
renaming and then git commit to finalize the commit. personally, i
find it very convenient to use the bundled gui for commits, i.e. git
gui. typically, i will do git add and other operations, but then
verify and review them with git gui. git gui also allows to do
line-by-line unstaging and other convenient operations."}
After the commit, the changes can be pushed to the same branch on GitHub:
$ git push :pre
Git will ask you for your user name and password on GitHub if you have
not configured anything. If you correctly type your user name and
password, the change should be added to your fork on GitHub.
If you want to make really sure you push to the right repository
(which is good practice), you can provide it explicitly:
$ git push origin :pre
or using an explicit URL:
$ git push git@github.com:Pakketeretet2/lammps.git :pre
After that, you can file a new pull request based on this
branch. GitHub will now look like this:
:c,image(JPG/tutorial_pull_request_feature_branch1.png)
Make sure that the current branch is set to the correct one, which, in
this case, is "add-user-manifold". Now click "New pull request". If
done correctly, the only changes you will see are those that were made
on this branch, so in my case, I will see nothing related to
$\mathrm{pair\_dzugatov}.$
This will open up a new window that lists changes made to the
repository. If you are just adding new files, there is not much to do,
but I suppose merge conflicts are to be resolved here if there are
changes in existing files. If all changes can automatically be merged,
green text at the top will say so and you can click the "Create pull
request" button, see image.
:c,image(JPG/tutorial_pull_request2.png)
After this you have to specify a short title and a comment with
details about your pull request. I guess here you write what your
modifications do and why they should be incorporated upstream. After
that, click the "Create pull request" button, see image below.
:c,image(JPG/tutorial_pull_request3.png)
Now just write some nice comments, click "Comment", and that is it. It
is now up to the maintainer(s) of the upstream repository to
incorporate the changes into the repository and to close the pull
request.
:c,image(JPG/tutorial_pull_request4.png)
:line
Additional changes :h2
Before the pull request is accepted, any additional changes you push
into your repository will automatically become part of the pull
request.
:line
After a merge :h2
When everything is fine the feature branch is merged into the LAMMPS
repositories:
:c,image(JPG/tutorial_merged.png)
Now one question remains: What to do with the feature branch that got
merged into upstream?
It is in principle safe to delete them from your own fork. This helps
keep it a bit more tidy. Note that you first have to switch to another
branch!
$ git checkout lammps-icms
$ git pull lammps-icms
$ git branch -d add-user-manifold :pre
If you do not pull first, it is not really a problem but git will warn
you at the next statement that you are deleting a local branch that
was not yet fully merged into HEAD. This is because git does not yet
know your branch just got merged into lammps-icms upstream. If you
first delete and then pull, everything should still be fine.
Finally, if you delete the branch locally, you might want to push this
to your remote(s) as well:
$ git push origin :add-user-manifold :pre
c4science · Help