Homec4science
Diffusion lammps (lammm-devel) Browse

lammps/doc/html/_sources/fix_gle.txt
caf9483a0a7clammm-devel

Last Change
Raw File

fix_gle.txt
View Options

.. index:: fix gle
fix gle command
===============
Syntax
""""""
.. parsed-literal::
fix ID id-group gle Ns Tstart Tstop seed Amatrix [noneq Cmatrix] [every stride]
* ID, group-ID are documented in :doc:`fix <fix>` command
* gle = style name of this fix command
* Ns = number of additional fictitious momenta
* Tstart, Tstop = temperature ramp during the run
* Amatrix = file to read the drift matrix A from
* seed = random number seed to use for generating noise (positive integer)
* zero or more keyword/value pairs may be appended
keyword = *noneq* and/or *every*
*noneq* Cmatrix = file to read the non-equilibrium covariance matrix from
*every* stride = apply the GLE once every time steps. Reduces the accuracy
of the integration of the GLE, but has *no effect* on the accuracy of equilibrium
sampling. It might change sampling properties when used together with *noneq*\ .
Examples
""""""""
fix 3 boundary gle 6 300 300 31415 smart.A
fix 1 all gle 6 300 300 31415 qt-300k.A noneq qt-300k.C
Description
"""""""""""
Apply a Generalized Langevin Equation (GLE) thermostat as described
in :ref:`(Ceriotti) <Ceriotti>`. The formalism allows one to obtain a number
of different effects ranging from efficient sampling of all
vibrational modes in the system to inexpensive (approximate)
modelling of nuclear quantum effects. Contrary to
:doc:`fix langevin <fix_langevin>`, this fix performs both
thermostatting and evolution of the Hamiltonian equations of motion, so it
should not be used together with :doc:`fix nve <fix_nve>` -- at least not
on the same atom groups.
Each degree of freedom in the thermostatted group is supplemented
with Ns additional degrees of freedom s, and the equations of motion
become
dq/dt=p/m
d(p,s)/dt=(F,0) - A(p,s) + B dW/dt
where F is the physical force, A is the drift matrix (that generalizes
the friction in Langevin dynamics), B is the diffusion term and dW/dt
un-correlated Gaussian random forces. The A matrix couples the physical
(q,p) dynamics with that of the additional degrees of freedom,
and makes it possible to obtain effectively a history-dependent
noise and friction kernel.
The drift matrix should be given as an external file *Afile*\ ,
as a (Ns+1 x Ns+1) matrix in inverse time units. Matrices that are
optimal for a given application and the system of choice can be
obtained from :ref:`(GLE4MD) <GLE4MD>`.
Equilibrium sampling a temperature T is obtained by specifiying the
target value as the *Tstart* and *Tstop* arguments, so that the diffusion
matrix that gives canonical sampling for a given A is computed automatically.
However, the GLE framework also allow for non-equilibrium sampling, that
can be used for instance to model inexpensively zero-point energy
effects :ref:`(Ceriotti2) <Ceriotti2>`. This is achieved specifying the
*noneq* keyword followed by the name of the file that contains the
static covariance matrix for the non-equilibrium dynamics.
Since integrating GLE dynamics can be costly when used together with
simple potentials, one can use the *every* optional keyword to
apply the Langevin terms only once every several MD steps, in a
multiple time-step fashion. This should be used with care when doing
non-equilibrium sampling, but should have no effect on equilibrium
averages when using canonical sampling.
The random number *seed* must be a positive integer. A Marsaglia random
number generator is used. Each processor uses the input seed to
generate its own unique seed and its own stream of random numbers.
Thus the dynamics of the system will not be identical on two runs on
different numbers of processors.
Note also that the Generalized Langevin Dynamics scheme that is
implemented by the :doc:`fix gld <fix_gld>` scheme is closely related
to the present one. In fact, it should be always possible to cast the
Prony series form of the memory kernel used by GLD into an appropriate
input matrix for :doc:`fix gle <fix_gle>`. While the GLE scheme is more
general, the form used by :doc:`fix gld <fix_gld>` can be more directly
related to the representation of an implicit solvent environment.
Restart, fix_modify, output, run start/stop, minimize info
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
The instantaneous values of the extended variables are written to
:doc:`binary restart files <restart>`. Because the state of the random
number generator is not saved in restart files, this means you cannot
do "exact" restarts with this fix, where the simulation continues on
the same as if no restart had taken place. However, in a statistical
sense, a restarted simulation should produce the same behavior.
Note however that you should use a different seed each time you
restart, otherwise the same sequence of random numbers will be used
each time, which might lead to stochastic synchronization and
subtle artefacts in the sampling.
This fix can ramp its target temperature over multiple runs, using the
*start* and *stop* keywords of the :doc:`run <run>` command. See the
:doc:`run <run>` command for details of how to do this.
The :doc:`fix_modify <fix_modify>` *energy* option is supported by this
fix to add the energy change induced by Langevin thermostatting to the
system's potential energy as part of :doc:`thermodynamic output <thermo_style>`.
This fix computes a global scalar which can be accessed by various
:ref:`output commands <howto_15>`. The scalar is the
cummulative energy change due to this fix. The scalar value
calculated by this fix is "extensive".
Restrictions
""""""""""""
The GLE thermostat in its current implementation should not be used
with rigid bodies, SHAKE or RATTLE. It is expected that all the
thermostatted degrees of freedom are fully flexible, and the sampled
ensemble will not be correct otherwise.
In order to perform constant-pressure simulations please use
:doc:`fix press/berendsen <fix_press_berendsen>`, rather than
:doc:`fix npt <fix_nh>`, to avoid duplicate integration of the
equations of motion.
This fix is part of the USER-MISC package. It is only enabled if LAMMPS
was built with that package. See the :ref:`Making LAMMPS <start_3>` section for more info.
Related commands
""""""""""""""""
:doc:`fix nvt <fix_nh>`, :doc:`fix temp/rescale <fix_temp_rescale>`, :doc:`fix viscous <fix_viscous>`, :doc:`fix nvt <fix_nh>`, :doc:`pair_style dpd/tstat <pair_dpd>`, :doc:`fix gld <fix_gld>`
----------
.. _Ceriotti:
**(Ceriotti)** Ceriotti, Bussi and Parrinello, J Chem Theory Comput 6,
1170-80 (2010)
.. _GLE4MD:
**(GLE4MD)** `http://epfl-cosmo.github.io/gle4md/ <http://epfl-cosmo.github.io/gle4md/>`_
.. _Ceriotti2:
**(Ceriotti2)** Ceriotti, Bussi and Parrinello, Phys Rev Lett 103,
030603 (2009)
.. _lws: http://lammps.sandia.gov
.. _ld: Manual.html
.. _lc: Section_commands.html#comm
c4science · Help