Homec4science
Diffusion lammps (lammm-devel) Browse

lammps/doc/pair_charmm.txt
37ed3d917e88lammm-devel

Last Change
Raw File

pair_charmm.txt
View Options

"LAMMPS WWW Site"_lws - "LAMMPS Documentation"_ld - "LAMMPS Commands"_lc :c
:link(lws,http://lammps.sandia.gov)
:link(ld,Manual.html)
:link(lc,Section_commands.html#comm)
:line
pair_style lj/charmm/coul/charmm command :h3
pair_style lj/charmm/coul/charmm/cuda command :h3
pair_style lj/charmm/coul/charmm/omp command :h3
pair_style lj/charmm/coul/charmm/implicit command :h3
pair_style lj/charmm/coul/charmm/implicit/cuda command :h3
pair_style lj/charmm/coul/charmm/implicit/omp command :h3
pair_style lj/charmm/coul/long command :h3
pair_style lj/charmm/coul/long/cuda command :h3
pair_style lj/charmm/coul/long/gpu command :h3
pair_style lj/charmm/coul/long/opt command :h3
pair_style lj/charmm/coul/long/omp command :h3
pair_style lj/charmm/coul/pppm/omp command :h3
[Syntax:]
pair_style style args :pre
style = {lj/charmm/coul/charmm} or {lj/charmm/coul/charmm/implicit} or {lj/charmm/coul/long}
args = list of arguments for a particular style :ul
{lj/charmm/coul/charmm} args = inner outer (inner2) (outer2)
inner, outer = global switching cutoffs for Lennard Jones (and Coulombic if only 2 args)
inner2, outer2 = global switching cutoffs for Coulombic (optional)
{lj/charmm/coul/charmm/implicit} args = inner outer (inner2) (outer2)
inner, outer = global switching cutoffs for LJ (and Coulombic if only 2 args)
inner2, outer2 = global switching cutoffs for Coulombic (optional)
{lj/charmm/coul/long} args = inner outer (cutoff)
inner, outer = global switching cutoffs for LJ (and Coulombic if only 2 args)
cutoff = global cutoff for Coulombic (optional, outer is Coulombic cutoff if only 2 args) :pre
[Examples:]
pair_style lj/charmm/coul/charmm 8.0 10.0
pair_style lj/charmm/coul/charmm 8.0 10.0 7.0 9.0
pair_coeff * * 100.0 2.0
pair_coeff 1 1 100.0 2.0 150.0 3.5 :pre
pair_style lj/charmm/coul/charmm/implicit 8.0 10.0
pair_style lj/charmm/coul/charmm/implicit 8.0 10.0 7.0 9.0
pair_coeff * * 100.0 2.0
pair_coeff 1 1 100.0 2.0 150.0 3.5 :pre
pair_style lj/charmm/coul/long 8.0 10.0
pair_style lj/charmm/coul/long 8.0 10.0 9.0
pair_coeff * * 100.0 2.0
pair_coeff 1 1 100.0 2.0 150.0 3.5 :pre
[Description:]
The {lj/charmm} styles compute LJ and Coulombic interactions with an
additional switching function S(r) that ramps the energy and force
smoothly to zero between an inner and outer cutoff. It is a widely
used potential in the "CHARMM"_http://www.scripps.edu/brooks MD code.
See "(MacKerell)"_#MacKerell for a description of the CHARMM force
field.
:c,image(Eqs/pair_charmm.jpg)
Both the LJ and Coulombic terms require an inner and outer cutoff.
They can be the same for both formulas or different depending on
whether 2 or 4 arguments are used in the pair_style command. In each
case, the inner cutoff distance must be less than the outer cutoff.
It it typical to make the difference between the 2 cutoffs about 1.0
Angstrom.
Style {lj/charmm/coul/charmm/implicit} computes the same formulas as
style {lj/charmm/coul/charmm} except that an additional 1/r term is
included in the Coulombic formula. The Coulombic energy thus varies
as 1/r^2. This is effectively a distance-dependent dielectric term
which is a simple model for an implicit solvent with additional
screening. It is designed for use in a simulation of an unsolvated
biomolecule (no explicit water molecules).
Styles {lj/charmm/coul/long} and {lj/charmm/coul/pppm/omp} compute
the same formulas as style {lj/charmm/coul/charmm} except that an
additional damping factor is applied to the Coulombic term, as in
the discussion for pair style {lj/cut/coul/long}. Only one Coulombic
cutoff is specified for {lj/charmm/coul/long}; if only 2 arguments
are used in the pair_style command, then the outer LJ cutoff is
used as the single Coulombic cutoff. Style {lj/charmm/coul/pppm/omp}
is a variant for use with K-space style "{pppm/proxy}"_kspace_style.html
and OpenMP multi-threading and will perform the corresponding
reciprocal space calculation concurrently with the pair calculation
in a separate thread. For certain parallel setups, this may have
a performance benefit over performing k-space style and pair style
separately and one after the other.
The following coefficients must be defined for each pair of atoms
types via the "pair_coeff"_pair_coeff.html command as in the examples
above, or in the data file or restart files read by the
"read_data"_read_data.html or "read_restart"_read_restart.html
commands, or by mixing as described below:
epsilon (energy units)
sigma (distance units)
epsilon_14 (energy units)
sigma_14 (distance units) :ul
Note that sigma is defined in the LJ formula as the zero-crossing
distance for the potential, not as the energy minimum at 2^(1/6)
sigma.
The latter 2 coefficients are optional. If they are specified, they
are used in the LJ formula between 2 atoms of these types which are
also first and fourth atoms in any dihedral. No cutoffs are specified
because this CHARMM force field does not allow varying cutoffs for
individual atom pairs; all pairs use the global cutoff(s) specified in
the pair_style command.
:line
Styles with a {cuda}, {gpu}, {omp}, or {opt} suffix are functionally
the same as the corresponding style without the suffix. They have
been optimized to run faster, depending on your available hardware, as
discussed in "Section_accelerate"_Section_accelerate.html of the
manual. The accelerated styles take the same arguments and should
produce the same results, except for round-off and precision issues.
These accelerated styles are part of the USER-CUDA, GPU, USER-OMP and OPT
packages, respectively. They are only enabled if LAMMPS was built with
those packages. See the "Making LAMMPS"_Section_start.html#start_3
section for more info.
You can specify the accelerated styles explicitly in your input script
by including their suffix, or you can use the "-suffix command-line
switch"_Section_start.html#start_6 when you invoke LAMMPS, or you can
use the "suffix"_suffix.html command in your input script.
See "Section_accelerate"_Section_accelerate.html of the manual for
more instructions on how to use the accelerated styles effectively.
:line
[Mixing, shift, table, tail correction, restart, rRESPA info]:
For atom type pairs I,J and I != J, the epsilon, sigma, epsilon_14,
and sigma_14 coefficients for all of the lj/charmm pair styles can be
mixed. The default mix value is {arithmetic} to coincide with the
usual settings for the CHARMM force field. See the "pair_modify"
command for details.
None of the lj/charmm pair styles support the
"pair_modify"_pair_modify.html shift option, since the Lennard-Jones
portion of the pair interaction is smoothed to 0.0 at the cutoff.
The {lj/charmm/coul/long} style supports the
"pair_modify"_pair_modify.html table option since it can tabulate the
short-range portion of the long-range Coulombic interaction.
None of the lj/charmm pair styles support the
"pair_modify"_pair_modify.html tail option for adding long-range tail
corrections to energy and pressure, since the Lennard-Jones portion of
the pair interaction is smoothed to 0.0 at the cutoff.
All of the lj/charmm pair styles write their information to "binary
restart files"_restart.html, so pair_style and pair_coeff commands do
not need to be specified in an input script that reads a restart file.
The lj/charmm/coul/long pair style supports the use of the {inner},
{middle}, and {outer} keywords of the "run_style respa"_run_style.html
command, meaning the pairwise forces can be partitioned by distance at
different levels of the rRESPA hierarchy. The other styles only
support the {pair} keyword of run_style respa. See the
"run_style"_run_style.html command for details.
:line
[Restrictions:]
The {lj/charmm/coul/charmm} and {lj/charmm/coul/charmm/implicit}
styles are part of the MOLECULE package. The {lj/charmm/coul/long}
style is part of the KSPACE package. They are only enabled if LAMMPS
was built with those packages. See the "Making
LAMMPS"_Section_start.html#start_3 section for more info. Note that
the MOLECULE and KSPACE packages are installed by default.
[Related commands:]
"pair_coeff"_pair_coeff.html
[Default:] none
:line
:link(MacKerell)
[(MacKerell)] MacKerell, Bashford, Bellott, Dunbrack, Evanseck, Field,
Fischer, Gao, Guo, Ha, et al, J Phys Chem, 102, 3586 (1998).
c4science · Help