Homec4science
Diffusion lammps (lammm-devel) Browse

lammps/doc/pair_tersoff.html
31dc359e82f6lammm-devel

Last Change
Raw File

pair_tersoff.html
View Options

<HTML>
<CENTER><A HREF = "http://lammps.sandia.gov">LAMMPS WWW Site</A> - <A HREF = "Manual.html">LAMMPS Documentation</A> - <A HREF = "Section_commands.html#comm">LAMMPS Commands</A>
</CENTER>
<HR>
<H3>pair_style tersoff command
</H3>
<P><B>Syntax:</B>
</P>
<PRE>pair_style tersoff
</PRE>
<PRE>pair_style tersoff/cuda
</PRE>
<PRE>pair_style tersoff/omp
</PRE>
<P><B>Examples:</B>
</P>
<PRE>pair_style tersoff
pair_coeff * * Si.tersoff Si
pair_coeff * * SiC.tersoff Si C Si
</PRE>
<P><B>Description:</B>
</P>
<P>The <I>tersoff</I> style computes a 3-body Tersoff potential
<A HREF = "#Tersoff_1">(Tersoff_1)</A> for the energy E of a system of atoms as
</P>
<CENTER><IMG SRC = "Eqs/pair_tersoff_1.jpg">
</CENTER>
<P>where f_R is a two-body term and f_A includes three-body interactions.
The summations in the formula are over all neighbors J and K of atom I
within a cutoff distance = R + D.
</P>
<P>Only a single pair_coeff command is used with the <I>tersoff</I> style
which specifies a Tersoff potential file with parameters for all
needed elements. These are mapped to LAMMPS atom types by specifying
N additional arguments after the filename in the pair_coeff command,
where N is the number of LAMMPS atom types:
</P>
<UL><LI>filename
<LI>N element names = mapping of Tersoff elements to atom types
</UL>
<P>As an example, imagine the SiC.tersoff file has Tersoff values for Si
and C. If your LAMMPS simulation has 4 atoms types and you want the
1st 3 to be Si, and the 4th to be C, you would use the following
pair_coeff command:
</P>
<PRE>pair_coeff * * SiC.tersoff Si Si Si C
</PRE>
<P>The 1st 2 arguments must be * * so as to span all LAMMPS atom types.
The first three Si arguments map LAMMPS atom types 1,2,3 to the Si
element in the Tersoff file. The final C argument maps LAMMPS atom
type 4 to the C element in the Tersoff file. If a mapping value is
specified as NULL, the mapping is not performed. This can be used
when a <I>tersoff</I> potential is used as part of the <I>hybrid</I> pair style.
The NULL values are placeholders for atom types that will be used with
other potentials.
</P>
<P>Tersoff files in the <I>potentials</I> directory of the LAMMPS distribution
have a ".tersoff" suffix. Lines that are not blank or comments
(starting with #) define parameters for a triplet of elements. The
parameters in a single entry correspond to coefficients in the formula
above:
</P>
<UL><LI>element 1 (the center atom in a 3-body interaction)
<LI>element 2 (the atom bonded to the center atom)
<LI>element 3 (the atom influencing the 1-2 bond in a bond-order sense)
<LI>m
<LI>gamma
<LI>lambda3 (1/distance units)
<LI>c
<LI>d
<LI>costheta0 (can be a value < -1 or > 1)
<LI>n
<LI>beta
<LI>lambda2 (1/distance units)
<LI>B (energy units)
<LI>R (distance units)
<LI>D (distance units)
<LI>lambda1 (1/distance units)
<LI>A (energy units)
</UL>
<P>The n, beta, lambda2, B, lambda1, and A parameters are only used for
two-body interactions. The m, gamma, lambda3, c, d, and costheta0
parameters are only used for three-body interactions. The R and D
parameters are used for both two-body and three-body interactions. The
non-annotated parameters are unitless. The value of m must be 3 or 1.
</P>
<P>The Tersoff potential file must contain entries for all the elements
listed in the pair_coeff command. It can also contain entries for
additional elements not being used in a particular simulation; LAMMPS
ignores those entries.
</P>
<P>For a single-element simulation, only a single entry is required
(e.g. SiSiSi). For a two-element simulation, the file must contain 8
entries (for SiSiSi, SiSiC, SiCSi, SiCC, CSiSi, CSiC, CCSi, CCC), that
specify Tersoff parameters for all permutations of the two elements
interacting in three-body configurations. Thus for 3 elements, 27
entries would be required, etc.
</P>
<P>As annotated above, the first element in the entry is the center atom
in a three-body interaction and it is bonded to the 2nd atom and the
bond is influenced by the 3rd atom. Thus an entry for SiCC means Si
bonded to a C with another C atom influencing the bond. Thus
three-body parameters for SiCSi and SiSiC entries will not, in
general, be the same. The parameters used for the two-body
interaction come from the entry where the 2nd element is repeated.
Thus the two-body parameters for Si interacting with C, comes from the
SiCC entry.
</P>
<P>The parameters used for a particular
three-body interaction come from the entry with the corresponding
three elements. The parameters used only for two-body interactions
(n, beta, lambda2, B, lambda1, and A) in entries whose 2nd and 3rd
element are different (e.g. SiCSi) are not used for anything and can
be set to 0.0 if desired.
</P>
<P>Note that the twobody parameters in entries such as SiCC and CSiSi
are often the same, due to the common use of symmetric mixing rules,
but this is not always the case. For example, the beta and n parameters in
Tersoff_2 <A HREF = "#Tersoff_2">(Tersoff_2)</A> are not symmetric.
</P>
<P>We chose the above form so as to enable users to define all commonly
used variants of the Tersoff potential. In particular, our form
reduces to the original Tersoff form when m = 3 and gamma = 1, while
it reduces to the form of <A HREF = "#Albe">Albe et al.</A> when beta = 1 and m = 1.
Note that in the current Tersoff implementation in LAMMPS, m must be
specified as either 3 or 1. Tersoff used a slightly different but
equivalent form for alloys, which we will refer to as Tersoff_2
potential <A HREF = "#Tersoff_2">(Tersoff_2)</A>.
</P>
<P>LAMMPS parameter values for Tersoff_2 can be obtained as follows:
gamma_ijk = omega_ik, lambda3 = 0 and the value of
m has no effect. The parameters for species i and j can be calculated
using the Tersoff_2 mixing rules:
</P>
<CENTER><IMG SRC = "Eqs/pair_tersoff_2.jpg">
</CENTER>
<P>Tersoff_2 parameters R and S must be converted to the LAMMPS
parameters R and D (R is different in both forms), using the following
relations: R=(R'+S')/2 and D=(S'-R')/2, where the primes indicate the
Tersoff_2 parameters.
</P>
<P>In the potentials directory, the file SiCGe.tersoff provides the
LAMMPS parameters for Tersoff's various versions of Si, as well as his
alloy parameters for Si, C, and Ge. This file can be used for pure Si,
(three different versions), pure C, pure Ge, binary SiC, and binary
SiGe. LAMMPS will generate an error if this file is used with any
combination involving C and Ge, since there are no entries for the GeC
interactions (Tersoff did not publish parameters for this
cross-interaction.) Tersoff files are also provided for the SiC alloy
(SiC.tersoff) and the GaN (GaN.tersoff) alloys.
</P>
<P>Many thanks to Rutuparna Narulkar, David Farrell, and Xiaowang Zhou
for helping clarify how Tersoff parameters for alloys have been
defined in various papers.
</P>
<HR>
<P>Styles with a <I>cuda</I>, <I>gpu</I>, <I>omp</I>, or <I>opt</I> suffix are functionally
the same as the corresponding style without the suffix. They have
been optimized to run faster, depending on your available hardware,
as discussed in <A HREF = "Section_accelerate.html">this section</A> of the manual.
The accelerated styles take the same arguments and should produce the
same results, except for round-off and precision issues.
</P>
<P>These accelerated styles are part of the USER-CUDA, GPU, USER-OMP and OPT
packages, respectively. They are only enabled if LAMMPS was built with
those packages. See the <A HREF = "Section_start.html#start_3">Making LAMMPS</A>
section for more info.
</P>
<P>You can specify the accelerated styles explicitly in your input script
by including their suffix, or you can use the <A HREF = "Section_start.html#start_6">-suffix command-line
switch</A> when you invoke LAMMPS, or you can
use the <A HREF = "suffix.html">suffix</A> command in your input script.
</P>
<P>See <A HREF = "Section_accelerate.html">this section</A> of the manual for more
instructions on how to use the accelerated styles effectively.
</P>
<HR>
<P><B>Mixing, shift, table, tail correction, restart, rRESPA info</B>:
</P>
<P>For atom type pairs I,J and I != J, where types I and J correspond to
two different element types, mixing is performed by LAMMPS as
described above from values in the potential file.
</P>
<P>This pair style does not support the <A HREF = "pair_modify.html">pair_modify</A>
shift, table, and tail options.
</P>
<P>This pair style does not write its information to <A HREF = "restart.html">binary restart
files</A>, since it is stored in potential files. Thus, you
need to re-specify the pair_style and pair_coeff commands in an input
script that reads a restart file.
</P>
<P>This pair style can only be used via the <I>pair</I> keyword of the
<A HREF = "run_style.html">run_style respa</A> command. It does not support the
<I>inner</I>, <I>middle</I>, <I>outer</I> keywords.
</P>
<HR>
<P><B>Restrictions:</B>
</P>
<P>This pair style is part of the MANYBODY package. It is only enabled
if LAMMPS was built with that package (which it is by default). See
the <A HREF = "Section_start.html#start_3">Making LAMMPS</A> section for more info.
</P>
<P>This pair style requires the <A HREF = "newton.html">newton</A> setting to be "on"
for pair interactions.
</P>
<P>The Tersoff potential files provided with LAMMPS (see the potentials
directory) are parameterized for metal <A HREF = "units.html">units</A>. You can
use the Tersoff potential with any LAMMPS units, but you would need to
create your own Tersoff potential file with coefficients listed in the
appropriate units if your simulation doesn't use "metal" units.
</P>
<P><B>Related commands:</B>
</P>
<P><A HREF = "pair_coeff.html">pair_coeff</A>
</P>
<P><B>Default:</B> none
</P>
<HR>
<A NAME = "Tersoff_1"></A>
<P><B>(Tersoff_1)</B> J. Tersoff, Phys Rev B, 37, 6991 (1988).
</P>
<A NAME = "Albe"></A>
<P><B>(Albe)</B> J. Nord, K. Albe, P. Erhart, and K. Nordlund, J. Phys.:
Condens. Matter, 15, 5649(2003).
</P>
<A NAME = "Tersoff_2"></A>
<P><B>(Tersoff_2)</B> J. Tersoff, Phys Rev B, 39, 5566 (1989); errata (PRB 41, 3248)
</P>
</HTML>
c4science · Help