Homec4science
Diffusion lammps (lammm-devel) Browse

lammps/doc/src/fix_addforce.txt
3c2bebd4ac44lammm-devel

Last Change
Raw File

fix_addforce.txt
View Options

"LAMMPS WWW Site"_lws - "LAMMPS Documentation"_ld - "LAMMPS Commands"_lc :c
:link(lws,http://lammps.sandia.gov)
:link(ld,Manual.html)
:link(lc,Section_commands.html#comm)
:line
fix addforce command :h3
[Syntax:]
fix ID group-ID addforce fx fy fz keyword value ... :pre
ID, group-ID are documented in "fix"_fix.html command :ulb,l
addforce = style name of this fix command :l
fx,fy,fz = force component values (force units) :l
any of fx,fy,fz can be a variable (see below) :pre
zero or more keyword/value pairs may be appended to args :l
keyword = {every} or {region} or {energy} :l
{every} value = Nevery
Nevery = add force every this many timesteps
{region} value = region-ID
region-ID = ID of region atoms must be in to have added force
{energy} value = v_name
v_name = variable with name that calculates the potential energy of each atom in the added force field :pre
:ule
[Examples:]
fix kick flow addforce 1.0 0.0 0.0
fix kick flow addforce 1.0 0.0 v_oscillate
fix ff boundary addforce 0.0 0.0 v_push energy v_espace :pre
[Description:]
Add fx,fy,fz to the corresponding component of force for each atom in
the group. This command can be used to give an additional push to
atoms in a simulation, such as for a simulation of Poiseuille flow in
a channel.
Any of the 3 quantities defining the force components can be specified
as an equal-style or atom-style "variable"_variable.html, namely {fx},
{fy}, {fz}. If the value is a variable, it should be specified as
v_name, where name is the variable name. In this case, the variable
will be evaluated each timestep, and its value(s) used to determine
the force component.
Equal-style variables can specify formulas with various mathematical
functions, and include "thermo_style"_thermo_style.html command
keywords for the simulation box parameters and timestep and elapsed
time. Thus it is easy to specify a time-dependent force field.
Atom-style variables can specify the same formulas as equal-style
variables but can also include per-atom values, such as atom
coordinates. Thus it is easy to specify a spatially-dependent force
field with optional time-dependence as well.
If the {every} keyword is used, the {Nevery} setting determines how
often the forces are applied. The default value is 1, for every
timestep.
If the {region} keyword is used, the atom must also be in the
specified geometric "region"_region.html in order to have force added
to it.
:line
Adding a force to atoms implies a change in their potential energy as
they move due to the applied force field. For dynamics via the "run"
command, this energy can be optionally added to the system's potential
energy for thermodynamic output (see below). For energy minimization
via the "minimize" command, this energy must be added to the system's
potential energy to formulate a self-consistent minimization problem
(see below).
The {energy} keyword is not allowed if the added force is a constant
vector F = (fx,fy,fz), with all components defined as numeric
constants and not as variables. This is because LAMMPS can compute
the energy for each atom directly as E = -x dot F = -(x*fx + y*fy +
z*fz), so that -Grad(E) = F.
The {energy} keyword is optional if the added force is defined with
one or more variables, and if you are performing dynamics via the
"run"_run.html command. If the keyword is not used, LAMMPS will set
the energy to 0.0, which is typically fine for dynamics.
The {energy} keyword is required if the added force is defined with
one or more variables, and you are performing energy minimization via
the "minimize" command. The keyword specifies the name of an
atom-style "variable"_variable.html which is used to compute the
energy of each atom as function of its position. Like variables used
for {fx}, {fy}, {fz}, the energy variable is specified as v_name,
where name is the variable name.
Note that when the {energy} keyword is used during an energy
minimization, you must insure that the formula defined for the
atom-style "variable"_variable.html is consistent with the force
variable formulas, i.e. that -Grad(E) = F. For example, if the force
were a spring-like F = kx, then the energy formula should be E =
-0.5kx^2. If you don't do this correctly, the minimization will not
converge properly.
:line
Styles with a suffix are functionally the same as the corresponding
style without the suffix. They have been optimized to run faster,
depending on your available hardware, as discussed in
"Section_accelerate"_Section_accelerate.html of the manual. The
accelerated styles take the same arguments and should produce the same
results, except for round-off and precision issues.
These accelerated styles are part of the ackage. They are only
enabled if LAMMPS was built with that package. See the "Making
LAMMPS"_Section_start.html#start_3 section for more info.
You can specify the accelerated styles explicitly in your input script
by including their suffix, or you can use the "-suffix command-line
switch"_Section_start.html#start_7 when you invoke LAMMPS, or you can
use the "suffix"_suffix.html command in your input script.
See "Section_accelerate"_Section_accelerate.html of the manual for
more instructions on how to use the accelerated styles effectively.
:line
[Restart, fix_modify, output, run start/stop, minimize info:]
No information about this fix is written to "binary restart
files"_restart.html.
The "fix_modify"_fix_modify.html {energy} option is supported by this
fix to add the potential "energy" inferred by the added force to the
system's potential energy as part of "thermodynamic
output"_thermo_style.html. This is a fictitious quantity but is
needed so that the "minimize"_minimize.html command can include the
forces added by this fix in a consistent manner. I.e. there is a
decrease in potential energy when atoms move in the direction of the
added force.
The "fix_modify"_fix_modify.html {respa} option is supported by this
fix. This allows to set at which level of the "r-RESPA"_run_style.html
integrator the fix is adding its forces. Default is the outermost
level.
This fix computes a global scalar and a global 3-vector of forces,
which can be accessed by various "output
commands"_Section_howto.html#howto_15. The scalar is the potential
energy discussed above. The vector is the total force on the group of
atoms before the forces on individual atoms are changed by the fix.
The scalar and vector values calculated by this fix are "extensive".
No parameter of this fix can be used with the {start/stop} keywords of
the "run"_run.html command.
The forces due to this fix are imposed during an energy minimization,
invoked by the "minimize"_minimize.html command. You should not
specify force components with a variable that has time-dependence for
use with a minimizer, since the minimizer increments the timestep as
the iteration count during the minimization.
NOTE: If you want the fictitious potential energy associated with the
added forces to be included in the total potential energy of the
system (the quantity being minimized), you MUST enable the
"fix_modify"_fix_modify.html {energy} option for this fix.
[Restrictions:] none
[Related commands:]
"fix setforce"_fix_setforce.html, "fix aveforce"_fix_aveforce.html
[Default:]
The option default for the every keyword is every = 1.
c4science · Help