Homec4science
Diffusion lammps (lammm-master-deprecated) Browse

lammps/doc/Section_accelerate.html
9c88bf82039alammm-master-deprecated

Last Change
Raw File

Section_accelerate.html
View Options

<HTML>
<CENTER><A HREF = "Section_packages.html">Previous Section</A> - <A HREF = "http://lammps.sandia.gov">LAMMPS WWW Site</A> -
<A HREF = "Manual.html">LAMMPS Documentation</A> - <A HREF = "Section_commands.html#comm">LAMMPS Commands</A> - <A HREF = "Section_howto.html">Next
Section</A>
</CENTER>
<HR>
<H3>5. Using accelerated CPU and GPU styles
</H3>
<P>Accelerated versions of various <A HREF = "pair_style.html">pair_style</A>,
<A HREF = "fix.html">fixes</A>, <A HREF = "compute.html">computes</A>, and other commands have
been added to LAMMPS, which will typically run faster than the
standard non-accelerated versions, if you have the appropriate
hardware on your system.
</P>
<P>The accelerated styles have the same name as the standard styles,
except that a suffix is appended. Otherwise, the syntax for the
command is identical, their functionality is the same, and the
numerical results it produces should also be identical, except for
precision and round-off issues.
</P>
<P>For example, all of these variants of the basic Lennard-Jones pair
style exist in LAMMPS:
</P>
<UL><LI><A HREF = "pair_lj.html">pair_style lj/cut</A>
<LI><A HREF = "pair_lj.html">pair_style lj/cut/opt</A>
<LI><A HREF = "pair_lj.html">pair_style lj/cut/omp</A>
<LI><A HREF = "pair_lj.html">pair_style lj/cut/gpu</A>
<LI><A HREF = "pair_lj.html">pair_style lj/cut/cuda</A>
</UL>
<P>Assuming you have built LAMMPS with the appropriate package, these
styles can be invoked by specifying them explicitly in your input
script. Or you can use the <A HREF = "Section_start.html#start_6">-suffix command-line
switch</A> to invoke the accelerated versions
automatically, without changing your input script. The
<A HREF = "suffix.html">suffix</A> command allows you to set a suffix explicitly and
to turn off/on the comand-line switch setting, both from within your
input script.
</P>
<P>Styles with an "opt" suffix are part of the OPT package and typically
speed-up the pairwise calculations of your simulation by 5-25%.
</P>
<P>Styles with an "omp" suffix are part of the USER-OMP package and allow
a pair-style to be run in threaded mode using OpenMP. This can be
useful on nodes with high-core counts when using less MPI processes
than cores is advantageous, e.g. when running with PPPM so that FFTs
are run on fewer MPI processors.
</P>
<P>Styles with a "gpu" or "cuda" suffix are part of the GPU or USER-CUDA
packages, and can be run on NVIDIA GPUs associated with your CPUs.
The speed-up due to GPU usage depends on a variety of factors, as
discussed below.
</P>
<P>To see what styles are currently available in each of the accelerated
packages, see <A HREF = "Section_commands.html#cmd_5">this section</A> of the
manual. A list of accelerated styles is included in the pair, fix,
compute, and kspace sections.
</P>
<P>The following sections explain:
</P>
<UL><LI>what hardware and software the accelerated styles require
<LI>how to build LAMMPS with the accelerated packages in place
<LI>what changes (if any) are needed in your input scripts
<LI>guidelines for best performance
<LI>speed-ups you can expect
</UL>
<P>The final section compares and contrasts the GPU and USER-CUDA
packages, since they are both designed to use NVIDIA GPU hardware.
</P>
5.1 <A HREF = "#acc_1">OPT package</A><BR>
5.2 <A HREF = "#acc_2">USER-OMP package</A><BR>
5.3 <A HREF = "#acc_3">GPU package</A><BR>
5.4 <A HREF = "#acc_4">USER-CUDA package</A><BR>
5.5 <A HREF = "#acc_5">Comparison of GPU and USER-CUDA packages</A> <BR>
<HR>
<HR>
<H4><A NAME = "acc_1"></A>5.1 OPT package
</H4>
<P>The OPT package was developed by James Fischer (High Performance
Technologies), David Richie, and Vincent Natoli (Stone Ridge
Technologies). It contains a handful of pair styles whose compute()
methods were rewritten in C++ templated form to reduce the overhead
due to if tests and other conditional code.
</P>
<P>The procedure for building LAMMPS with the OPT package is simple. It
is the same as for any other package which has no additional library
dependencies:
</P>
<PRE>make yes-opt
make machine
</PRE>
<P>If your input script uses one of the OPT pair styles,
you can run it as follows:
</P>
<PRE>lmp_machine -sf opt < in.script
mpirun -np 4 lmp_machine -sf opt < in.script
</PRE>
<P>You should see a reduction in the "Pair time" printed out at the end
of the run. On most machines and problems, this will typically be a 5
to 20% savings.
</P>
<HR>
<HR>
<H4><A NAME = "acc_2"></A>5.2 USER-OMP package
</H4>
<P>This section will be written when the USER-OMP package is released
in main LAMMPS.
</P>
<HR>
<HR>
<H4><A NAME = "acc_3"></A>5.3 GPU package
</H4>
<P>The GPU package was developed by Mike Brown at ORNL. It provides GPU
versions of several pair styles and for long-range Coulombics via the
PPPM command. It has the following features:
</P>
<UL><LI>The package is designed to exploit common GPU hardware configurations
where one or more GPUs are coupled with many cores of a multi-core
CPUs, e.g. within a node of a parallel machine.
<LI>Atom-based data (e.g. coordinates, forces) moves back-and-forth
between the CPU(s) and GPU every timestep.
<LI>Neighbor lists can be constructed on the CPU or on the GPU
<LI>The charge assignement and force interpolation portions of PPPM can be
run on the GPU. The FFT portion, which requires MPI communication
between processors, runs on the CPU.
<LI>Asynchronous force computations can be performed simultaneously on the
CPU(s) and GPU.
<LI>LAMMPS-specific code is in the GPU package. It makes calls to a
generic GPU library in the lib/gpu directory. This library provides
NVIDIA support as well as more general OpenCL support, so that the
same functionality can eventually be supported on a variety of GPU
hardware.
</UL>
<P><B>Hardware and software requirements:</B>
</P>
<P>To use this package, you currently need to have specific NVIDIA
hardware and install specific NVIDIA CUDA software on your system:
</P>
<UL><LI>Check if you have an NVIDIA card: cat /proc/driver/nvidia/cards/0
<LI>Go to http://www.nvidia.com/object/cuda_get.html
<LI>Install a driver and toolkit appropriate for your system (SDK is not necessary)
<LI>Follow the instructions in lammps/lib/gpu/README to build the library (see below)
<LI>Run lammps/lib/gpu/nvc_get_devices to list supported devices and properties
</UL>
<P><B>Building LAMMPS with the GPU package:</B>
</P>
<P>As with other packages that include a separately compiled library, you
need to first build the GPU library, before building LAMMPS itself.
General instructions for doing this are in <A HREF = "doc/Section_start.html#start_3">this
section</A> of the manual. For this
package, do the following, using a Makefile in lib/gpu appropriate for
your system:
</P>
<PRE>cd lammps/lib/gpu
make -f Makefile.linux
(see further instructions in lammps/lib/gpu/README)
</PRE>
<P>If you are successful, you will produce the file lib/libgpu.a.
</P>
<P>Now you are ready to build LAMMPS with the GPU package installed:
</P>
<PRE>cd lammps/src
make yes-gpu
make machine
</PRE>
<P>Note that the lo-level Makefile (e.g. src/MAKE/Makefile.linux) has
these settings: gpu_SYSINC, gpu_SYSLIB, gpu_SYSPATH. These need to be
set appropriately to include the paths and settings for the CUDA
system software on your machine. See src/MAKE/Makefile.g++ for an
example.
</P>
<P><B>GPU configuration</B>
</P>
<P>When using GPUs, you are restricted to one physical GPU per LAMMPS
process, which is an MPI process running on a single core or
processor. Multiple MPI processes (CPU cores) can share a single GPU,
and in many cases it will be more efficient to run this way.
</P>
<P><B>Input script requirements:</B>
</P>
<P>Additional input script requirements to run pair or PPPM styles with a
<I>gpu</I> suffix are as follows:
</P>
<UL><LI>To invoke specific styles from the GPU package, you can either append
"gpu" to the style name (e.g. pair_style lj/cut/gpu), or use the
<A HREF = "Section_start.html#start_6">-suffix command-line switch</A>, or use the
<A HREF = "suffix.html">suffix</A> command.
<LI>The <A HREF = "newton.html">newton pair</A> setting must be <I>off</I>.
<LI>The <A HREF = "package.html">package gpu</A> command must be used near the beginning
of your script to control the GPU selection and initialization
settings. It also has an option to enable asynchronous splitting of
force computations between the CPUs and GPUs.
</UL>
<P>As an example, if you have two GPUs per node and 8 CPU cores per node,
and would like to run on 4 nodes (32 cores) with dynamic balancing of
force calculation across CPU and GPU cores, you could specify
</P>
<PRE>package gpu force/neigh 0 1 -1
</PRE>
<P>In this case, all CPU cores and GPU devices on the nodes would be
utilized. Each GPU device would be shared by 4 CPU cores. The CPU
cores would perform force calculations for some fraction of the
particles at the same time the GPUs performed force calculation for
the other particles.
</P>
<P><B>Timing output:</B>
</P>
<P>As described by the <A HREF = "package.html">package gpu</A> command, GPU
accelerated pair styles can perform computations asynchronously with
CPU computations. The "Pair" time reported by LAMMPS will be the
maximum of the time required to complete the CPU pair style
computations and the time required to complete the GPU pair style
computations. Any time spent for GPU-enabled pair styles for
computations that run simultaneously with <A HREF = "bond_style.html">bond</A>,
<A HREF = "angle_style.html">angle</A>, <A HREF = "dihedral_style.html">dihedral</A>,
<A HREF = "improper_style.html">improper</A>, and <A HREF = "kspace_style.html">long-range</A>
calculations will not be included in the "Pair" time.
</P>
<P>When the <I>mode</I> setting for the package gpu command is force/neigh,
the time for neighbor list calculations on the GPU will be added into
the "Pair" time, not the "Neigh" time. An additional breakdown of the
times required for various tasks on the GPU (data copy, neighbor
calculations, force computations, etc) are output only with the LAMMPS
screen output (not in the log file) at the end of each run. These
timings represent total time spent on the GPU for each routine,
regardless of asynchronous CPU calculations.
</P>
<P><B>Performance tips:</B>
</P>
<P>Generally speaking, for best performance, you should use multiple CPUs
per GPU, as provided my most multi-core CPU/GPU configurations.
</P>
<P>Because of the large number of cores within each GPU device, it may be
more efficient to run on fewer processes per GPU when the number of
particles per MPI process is small (100's of particles); this can be
necessary to keep the GPU cores busy.
</P>
<P>See the lammps/lib/gpu/README file for instructions on how to build
the GPU library for single, mixed, or double precision. The latter
requires that your GPU card support double precision.
</P>
<HR>
<HR>
<H4><A NAME = "acc_4"></A>5.4 USER-CUDA package
</H4>
<P>The USER-CUDA package was developed by Christian Trott at U Technology
Ilmenau in Germany. It provides NVIDIA GPU versions of many pair
styles, many fixes, a few computes, and for long-range Coulombics via
the PPPM command. It has the following features:
</P>
<UL><LI>The package is designed to allow an entire LAMMPS calculation, for
many timesteps, to run entirely on the GPU (except for inter-processor
MPI communication), so that atom-based data (e.g. coordinates, forces)
do not have to move back-and-forth between the CPU and GPU.
<LI>The speed-up advantage of this approach is typically better when the
number of atoms per GPU is large
<LI>Data will stay on the GPU until a timestep where a non-GPU-ized fix or
compute is invoked. Whenever a non-GPU operation occurs (fix,
compute, output), data automatically moves back to the CPU as needed.
This may incur a performance penalty, but should otherwise work
transparently.
<LI>Neighbor lists for GPU-ized pair styles are constructed on the
GPU.
<LI>The package only supports use of a single CPU (core) with each
GPU.
</UL>
<P><B>Hardware and software requirements:</B>
</P>
<P>To use this package, you need to have specific NVIDIA hardware and
install specific NVIDIA CUDA software on your system.
</P>
<P>Your NVIDIA GPU needs to support Compute Capability 1.3. This list may
help you to find out the Compute Capability of your card:
</P>
<P>http://en.wikipedia.org/wiki/Comparison_of_Nvidia_graphics_processing_units
</P>
<P>Install the Nvidia Cuda Toolkit in version 3.2 or higher and the
corresponding GPU drivers. The Nvidia Cuda SDK is not required for
LAMMPSCUDA but we recommend it be installed. You can then make sure
that its sample projects can be compiled without problems.
</P>
<P><B>Building LAMMPS with the USER-CUDA package:</B>
</P>
<P>As with other packages that include a separately compiled library, you
need to first build the USER-CUDA library, before building LAMMPS
itself. General instructions for doing this are in <A HREF = "doc/Section_start.html#start_3">this
section</A> of the manual. For this
package, do the following, using settings in the lib/cuda Makefiles
appropriate for your system:
</P>
<UL><LI>Go to the lammps/lib/cuda directory
<LI>If your <I>CUDA</I> toolkit is not installed in the default system directoy
<I>/usr/local/cuda</I> edit the file <I>lib/cuda/Makefile.common</I>
accordingly.
<LI>Type "make OPTIONS", where <I>OPTIONS</I> are one or more of the following
options. The settings will be written to the
<I>lib/cuda/Makefile.defaults</I> and used in the next step.
<PRE><I>precision=N</I> to set the precision level
N = 1 for single precision (default)
N = 2 for double precision
N = 3 for positions in double precision
N = 4 for positions and velocities in double precision
<I>arch=M</I> to set GPU compute capability
M = 20 for CC2.0 (GF100/110, e.g. C2050,GTX580,GTX470) (default)
M = 21 for CC2.1 (GF104/114, e.g. GTX560, GTX460, GTX450)
M = 13 for CC1.3 (GF200, e.g. C1060, GTX285)
<I>prec_timer=0/1</I> to use hi-precision timers
0 = do not use them (default)
1 = use these timers
this is usually only useful for Mac machines
<I>dbg=0/1</I> to activate debug mode
0 = no debug mode (default)
1 = yes debug mode
this is only useful for developers
<I>cufft=1</I> to determine usage of CUDA FFT library
0 = no CUFFT support (default)
in the future other CUDA-enabled FFT libraries might be supported
</PRE>
<LI>Type "make" to build the library. If you are successful, you will
produce the file lib/libcuda.a.
</UL>
<P>Now you are ready to build LAMMPS with the USER-CUDA package installed:
</P>
<PRE>cd lammps/src
make yes-user-cuda
make machine
</PRE>
<P>Note that the LAMMPS build references the lib/cuda/Makefile.common
file to extract setting specific CUDA settings. So it is important
that you have first built the cuda library (in lib/cuda) using
settings appropriate to your system.
</P>
<P><B>Input script requirements:</B>
</P>
<P>Additional input script requirements to run styles with a <I>cuda</I>
suffix are as follows:
</P>
<UL><LI>To invoke specific styles from the USER-CUDA package, you can either
append "cuda" to the style name (e.g. pair_style lj/cut/cuda), or use
the <A HREF = "Section_start.html#start_6">-suffix command-line switch</A>, or use
the <A HREF = "suffix.html">suffix</A> command. One exception is that the
<A HREF = "kspace_style.html">kspace_style pppm/cuda</A> command has to be requested
explicitly.
<LI>To use the USER-CUDA package with its default settings, no additional
command is needed in your input script. This is because when LAMMPS
starts up, it detects if it has been built with the USER-CUDA package.
See the <A HREF = "Section_start.html#start_6">-cuda command-line switch</A> for
more details.
<LI>To change settings for the USER-CUDA package at run-time, the <A HREF = "package.html">package
cuda</A> command can be used near the beginning of your
input script. See the <A HREF = "package.html">package</A> command doc page for
details.
</UL>
<P><B>Performance tips:</B>
</P>
<P>The USER-CUDA package offers more speed-up relative to CPU performance
when the number of atoms per GPU is large, e.g. on the order of tens
or hundreds of 1000s.
</P>
<P>As noted above, this package will continue to run a simulation
entirely on the GPU(s) (except for inter-processor MPI communication),
for multiple timesteps, until a CPU calculation is required, either by
a fix or compute that is non-GPU-ized, or until output is performed
(thermo or dump snapshot or restart file). The less often this
occurs, the faster your simulation will run.
</P>
<HR>
<HR>
<H4><A NAME = "acc_5"></A>5.5 Comparison of GPU and USER-CUDA packages
</H4>
<P>Both the GPU and USER-CUDA packages accelerate a LAMMPS calculation
using NVIDIA hardware, but they do it in different ways.
</P>
<P>As a consequence, for a particular simulation on specific hardware,
one package may be faster than the other. We give guidelines below,
but the best way to determine which package is faster for your input
script is to try both of them on your machine. See the benchmarking
section below for examples where this has been done.
</P>
<P><B>Guidelines for using each package optimally:</B>
</P>
<UL><LI>The GPU package allows you to assign multiple CPUs (cores) to a single
GPU (a common configuration for "hybrid" nodes that contain multicore
CPU(s) and GPU(s)) and works effectively in this mode. The USER-CUDA
package does not allow this; you can only use one CPU per GPU.
<LI>The GPU package moves per-atom data (coordinates, forces)
back-and-forth between the CPU and GPU every timestep. The USER-CUDA
package only does this on timesteps when a CPU calculation is required
(e.g. to invoke a fix or compute that is non-GPU-ized). Hence, if you
can formulate your input script to only use GPU-ized fixes and
computes, and avoid doing I/O too often (thermo output, dump file
snapshots, restart files), then the data transfer cost of the
USER-CUDA package can be very low, causing it to run faster than the
GPU package.
<LI>The GPU package is often faster than the USER-CUDA package, if the
number of atoms per GPU is "small". The crossover point, in terms of
atoms/GPU at which the USER-CUDA package becomes faster depends
strongly on the pair style. For example, for a simple Lennard Jones
system the crossover (in single precision) is often about 50K-100K
atoms per GPU. When performing double precision calculations the
crossover point can be significantly smaller.
<LI>Both packages compute bonded interactions (bonds, angles, etc) on the
CPU. This means a model with bonds will force the USER-CUDA package
to transfer per-atom data back-and-forth between the CPU and GPU every
timestep. If the GPU package is running with several MPI processes
assigned to one GPU, the cost of computing the bonded interactions is
spread across more CPUs and hence the GPU package can run faster.
<LI>When using the GPU package with multiple CPUs assigned to one GPU, its
performance depends to some extent on high bandwidth between the CPUs
and the GPU. Hence its performance is affected if full 16 PCIe lanes
are not available for each GPU. In HPC environments this can be the
case if S2050/70 servers are used, where two devices generally share
one PCIe 2.0 16x slot. Also many multi-GPU mainboards do not provide
full 16 lanes to each of the PCIe 2.0 16x slots.
</UL>
<P><B>Differences between the two packages:</B>
</P>
<UL><LI>The GPU package accelerates only pair force, neighbor list, and PPPM
calculations. The USER-CUDA package currently supports a wider range
of pair styles and can also accelerate many fix styles and some
compute styles, as well as neighbor list and PPPM calculations.
<LI>The GPU package uses more GPU memory than the USER-CUDA package. This
is generally not a problem since typical runs are computation-limited
rather than memory-limited.
</UL>
<P><B>Examples:</B>
</P>
<P>The LAMMPS distribution has two directories with sample input scripts
for the GPU and USER-CUDA packages.
</P>
<UL><LI>lammps/examples/gpu = GPU package files
<LI>lammps/examples/USER/cuda = USER-CUDA package files
</UL>
<P>These contain input scripts for identical systems, so they can be used
to benchmark the performance of both packages on your system.
</P>
<HR>
<P><B>Benchmark data:</B>
</P>
<P>NOTE: We plan to add some benchmark results and plots here for the
examples described in the previous section.
</P>
<P>Simulations:
</P>
<P>1. Lennard Jones
</P>
<UL><LI>256,000 atoms
<LI>2.5 A cutoff
<LI>0.844 density
</UL>
<P>2. Lennard Jones
</P>
<UL><LI>256,000 atoms
<LI>5.0 A cutoff
<LI>0.844 density
</UL>
<P>3. Rhodopsin model
</P>
<UL><LI>256,000 atoms
<LI>10A cutoff
<LI>Coulomb via PPPM
</UL>
<P>4. Lihtium-Phosphate
</P>
<UL><LI>295650 atoms
<LI>15A cutoff
<LI>Coulomb via PPPM
</UL>
<P>Hardware:
</P>
<P>Workstation:
</P>
<UL><LI>2x GTX470
<LI>i7 950@3GHz
<LI>24Gb DDR3 @ 1066Mhz
<LI>CentOS 5.5
<LI>CUDA 3.2
<LI>Driver 260.19.12
</UL>
<P>eStella:
</P>
<UL><LI>6 Nodes
<LI>2xC2050
<LI>2xQDR Infiniband interconnect(aggregate bandwidth 80GBps)
<LI>Intel X5650 HexCore @ 2.67GHz
<LI>SL 5.5
<LI>CUDA 3.2
<LI>Driver 260.19.26
</UL>
<P>Keeneland:
</P>
<UL><LI>HP SL-390 (Ariston) cluster
<LI>120 nodes
<LI>2x Intel Westmere hex-core CPUs
<LI>3xC2070s
<LI>QDR InfiniBand interconnect
</UL>
</HTML>
c4science · Help