<p><a class="reference internal" href="Section_accelerate.html"><em>Return to Section accelerate overview</em></a></p>
<div class="section" id="user-intel-package">
<h1>5.USER-INTEL package<a class="headerlink" href="#user-intel-package" title="Permalink to this headline">¶</a></h1>
<p>The USER-INTEL package was developed by Mike Brown at Intel
Corporation. It provides two methods for accelerating simulations,
depending on the hardware you have. The first is acceleration on
Intel(R) CPUs by running in single, mixed, or double precision with
vectorization. The second is acceleration on Intel(R) Xeon Phi(TM)
coprocessors via offloading neighbor list and non-bonded force
calculations to the Phi. The same C++ code is used in both cases.
When offloading to a coprocessor from a CPU, the same routine is run
twice, once on the CPU and once with an offload flag.</p>
<p>Note that the USER-INTEL package supports use of the Phi in “offload”
mode, not “native” mode like the <a class="reference internal" href="accelerate_kokkos.html"><em>KOKKOS package</em></a>.</p>
<p>Also note that the USER-INTEL package can be used in tandem with the
<a class="reference internal" href="accelerate_omp.html"><em>USER-OMP package</em></a>. This is useful when
offloading pair style computations to the Phi, so that other styles
not supported by the USER-INTEL package, e.g. bond, angle, dihedral,
improper, and long-range electrostatics, can run simultaneously in
threaded mode on the CPU cores. Since less MPI tasks than CPU cores
will typically be invoked when running with coprocessors, this enables
the extra CPU cores to be used for useful computation.</p>
<p>As illustrated below, if LAMMPS is built with both the USER-INTEL and
USER-OMP packages, this dual mode of operation is made easier to use,
via the “-suffix hybrid intel omp” <a class="reference internal" href="Section_start.html#start-7"><span>command-line switch</span></a> or the <a class="reference internal" href="suffix.html"><em>suffix hybrid intel omp</em></a> command. Both set a second-choice suffix to “omp” so
that styles from the USER-INTEL package will be used if available,
with styles from the USER-OMP package as a second choice.</p>
<p>Here is a quick overview of how to use the USER-INTEL package for CPU
acceleration, assuming one or more 16-core nodes. More details
follow.</p>
<div class="highlight-python"><div class="highlight"><pre>use an Intel compiler
use these CCFLAGS settings in Makefile.machine: -fopenmp, -DLAMMPS_MEMALIGN=64, -restrict, -xHost, -fno-alias, -ansi-alias, -override-limits
use these LINKFLAGS settings in Makefile.machine: -fopenmp, -xHost
make yes-user-intel yes-user-omp # including user-omp is optional
make mpi # build with the USER-INTEL package, if settings (including compiler) added to Makefile.mpi
make intel_cpu # or Makefile.intel_cpu already has settings, uses Intel MPI wrapper
Make.py -v -p intel omp -intel cpu -a file mpich_icc # or one-line build via Make.py for MPICH
Make.py -v -p intel omp -intel cpu -a file ompi_icc # or for OpenMPI
Make.py -v -p intel omp -intel cpu -a file intel_cpu # or for Intel MPI wrapper
<p>Your compiler must support the OpenMP interface. Use of an Intel(R)
C++ compiler is recommended, but not required. However, g++ will not
recognize some of the settings listed above, so they cannot be used.
Optimizations for vectorization have only been tested with the
Intel(R) compiler. Use of other compilers may not result in
vectorization, or give poor performance.</p>
<p>The recommended version of the Intel(R) compiler is 14.0.1.106.
Versions 15.0.1.133 and later are also supported. If using Intel(R)
MPI, versions 15.0.2.044 and later are recommended.</p>
<p>To use the offload option, you must have one or more Intel(R) Xeon
Phi(TM) coprocessors and use an Intel(R) C++ compiler.</p>
<p><strong>Building LAMMPS with the USER-INTEL package:</strong></p>
<p>The lines above illustrate how to include/build with the USER-INTEL
package, for either CPU or Phi support, in two steps, using the “make”
command. Or how to do it with one command via the src/Make.py script,
described in <a class="reference internal" href="Section_start.html#start-4"><span>Section 2.4</span></a> of the manual.
Type “Make.py -h” for help. Because the mechanism for specifing what
compiler to use (Intel in this case) is different for different MPI
wrappers, 3 versions of the Make.py command are shown.</p>
<p>Note that if you build with support for a Phi coprocessor, the same
binary can be used on nodes with or without coprocessors installed.
However, if you do not have coprocessors on your system, building
without offload support will produce a smaller binary.</p>
<p>If you also build with the USER-OMP package, you can use styles from
both packages, as described below.</p>
<p>Note that the CCFLAGS and LINKFLAGS settings in Makefile.machine must
include “-fopenmp”. Likewise, if you use an Intel compiler, the
CCFLAGS setting must include “-restrict”. For Phi support, the
“-DLMP_INTEL_OFFLOAD” (CCFLAGS) and “-offload” (LINKFLAGS) settings
are required. The other settings listed above are optional, but will
typically improve performance. The Make.py command will add all of
these automatically.</p>
<p>If you are compiling on the same architecture that will be used for
the runs, adding the flag <em>-xHost</em> to CCFLAGS enables vectorization
with the Intel(R) compiler. Otherwise, you must provide the correct
compute node architecture to the -x option (e.g. -xAVX).</p>
<p>Example machines makefiles Makefile.intel_cpu and Makefile.intel_phi
are included in the src/MAKE/OPTIONS directory with settings that
perform well with the Intel(R) compiler. The latter has support for
offload to Phi coprocessors; the former does not.</p>
<p><strong>Run with the USER-INTEL package from the command line:</strong></p>
<p>The mpirun or mpiexec command sets the total number of MPI tasks used
by LAMMPS (one or multiple per compute node) and the number of MPI
tasks used per node. E.g. the mpirun command in MPICH does this via
its -np and -ppn switches. Ditto for OpenMPI via -np and -npernode.</p>
<p>If you compute (any portion of) pairwise interactions using USER-INTEL
pair styles on the CPU, or use USER-OMP styles on the CPU, you need to
choose how many OpenMP threads per MPI task to use. If both packages
are used, it must be done for both packages, and the same thread count
value should be used for both. Note that the product of MPI tasks *
threads/task should not exceed the physical number of cores (on a
node), otherwise performance will suffer.</p>
<p>When using the USER-INTEL package for the Phi, you also need to
specify the number of coprocessor/node and optionally the number of
coprocessor threads per MPI task to use. Note that coprocessor
threads (which run on the coprocessor) are totally independent from
OpenMP threads (which run on the CPU). The default values for the
settings that affect coprocessor threads are typically fine, as
discussed below.</p>
<p>As in the lines above, use the “-sf intel” or “-sf hybrid intel omp”
<a class="reference internal" href="Section_start.html#start-7"><span>command-line switch</span></a>, which will
automatically append “intel” to styles that support it. In the second
case, “omp” will be appended if an “intel” style does not exist.</p>
<p>Note that if either switch is used, it also invokes a default command:
<a class="reference internal" href="package.html"><em>package intel 1</em></a>. If the “-sf hybrid intel omp” switch
is used, the default USER-OMP command <a class="reference internal" href="package.html"><em>package omp 0</em></a> is
also invoked (if LAMMPS was built with USER-OMP). Both set the number
of OpenMP threads per MPI task via the OMP_NUM_THREADS environment
variable. The first command sets the number of Xeon Phi(TM)
coprocessors/node to 1 (ignored if USER-INTEL is built for CPU-only),
and the precision mode to “mixed” (default value).</p>
<p>You can also use the “-pk intel Nphi” <a class="reference internal" href="Section_start.html#start-7"><span>command-line switch</span></a> to explicitly set Nphi = # of Xeon
Phi(TM) coprocessors/node, as well as additional options. Nphi should
be >= 1 if LAMMPS was built with coprocessor support, otherswise Nphi
= 0 for a CPU-only build. All the available coprocessor threads on
each Phi will be divided among MPI tasks, unless the <em>tptask</em> option
of the “-pk intel” <a class="reference internal" href="Section_start.html#start-7"><span>command-line switch</span></a> is
used to limit the coprocessor threads per MPI task. See the <a class="reference internal" href="package.html"><em>package intel</em></a> command for details, including the default values
used for all its options if not specified, and how to set the number
of OpenMP threads via the OMP_NUM_THREADS environment variable if
desired.</p>
<p>If LAMMPS was built with the USER-OMP package, you can also use the
“-pk omp Nt” <a class="reference internal" href="Section_start.html#start-7"><span>command-line switch</span></a> to
explicitly set Nt = # of OpenMP threads per MPI task to use, as well
as additional options. Nt should be the same threads per MPI task as
set for the USER-INTEL package, e.g. via the “-pk intel Nphi omp Nt”
command. Again, see the <a class="reference internal" href="package.html"><em>package omp</em></a> command for
details, including the default values used for all its options if not
specified, and how to set the number of OpenMP threads via the
OMP_NUM_THREADS environment variable if desired.</p>
<p><strong>Or run with the USER-INTEL package by editing an input script:</strong></p>
<p>The discussion above for the mpirun/mpiexec command, MPI tasks/node,
OpenMP threads per MPI task, and coprocessor threads per MPI task is
the same.</p>
<p>Use the <a class="reference internal" href="suffix.html"><em>suffix intel</em></a> or <a class="reference internal" href="suffix.html"><em>suffix hybrid intel omp</em></a> commands, or you can explicitly add an “intel” or
“omp” suffix to individual styles in your input script, e.g.</p>
<p>You must also use the <a class="reference internal" href="package.html"><em>package intel</em></a> command, unless the
“-sf intel” or “-pk intel” <a class="reference internal" href="Section_start.html#start-7"><span>command-line switches</span></a> were used. It specifies how many
coprocessors/node to use, as well as other OpenMP threading and
coprocessor options. The <a class="reference internal" href="package.html"><em>package</em></a> doc page explains how
to set the number of OpenMP threads via an environment variable if
desired.</p>
<p>If LAMMPS was also built with the USER-OMP package, you must also use
the <a class="reference internal" href="package.html"><em>package omp</em></a> command to enable that package, unless
the “-sf hybrid intel omp” or “-pk omp” <a class="reference internal" href="Section_start.html#start-7"><span>command-line switches</span></a> were used. It specifies how many
OpenMP threads per MPI task to use (should be same as the setting for
the USER-INTEL package), as well as other options. Its doc page
explains how to set the number of OpenMP threads via an environment
variable if desired.</p>
<p><strong>Speed-ups to expect:</strong></p>
<p>If LAMMPS was not built with coprocessor support (CPU only) when
including the USER-INTEL package, then acclerated styles will run on
the CPU using vectorization optimizations and the specified precision.
This may give a substantial speed-up for a pair style, particularly if
mixed or single precision is used.</p>
<p>If LAMMPS was built with coproccesor support, the pair styles will run
on one or more Intel(R) Xeon Phi(TM) coprocessors (per node). The
performance of a Xeon Phi versus a multi-core CPU is a function of
your hardware, which pair style is used, the number of
atoms/coprocessor, and the precision used on the coprocessor (double,
single, mixed).</p>
<p>See the <a class="reference external" href="http://lammps.sandia.gov/bench.html">Benchmark page</a> of the
LAMMPS web site for performance of the USER-INTEL package on different
hardware.</p>
<div class="admonition note">
<p class="first admonition-title">Note</p>
<p class="last">Setting core affinity is often used to pin MPI tasks and OpenMP
threads to a core or group of cores so that memory access can be
uniform. Unless disabled at build time, affinity for MPI tasks and
OpenMP threads on the host (CPU) will be set by default on the host
when using offload to a coprocessor. In this case, it is unnecessary
to use other methods to control affinity (e.g. taskset, numactl,
I_MPI_PIN_DOMAIN, etc.). This can be disabled in an input script with
the <em>no_affinity</em> option to the <a class="reference internal" href="package.html"><em>package intel</em></a> command
or by disabling the option at build time (by adding
-DINTEL_OFFLOAD_NOAFFINITY to the CCFLAGS line of your Makefile).
Disabling this option is not recommended, especially when running on a
machine with hyperthreading disabled.</p>
</div>
<p><strong>Guidelines for best performance on an Intel(R) Xeon Phi(TM)
coprocessor:</strong></p>
<ul class="simple">
<li>The default for the <a class="reference internal" href="package.html"><em>package intel</em></a> command is to have
all the MPI tasks on a given compute node use a single Xeon Phi(TM)
coprocessor. In general, running with a large number of MPI tasks on
each node will perform best with offload. Each MPI task will
automatically get affinity to a subset of the hardware threads
available on the coprocessor. For example, if your card has 61 cores,
with 60 cores available for offload and 4 hardware threads per core
(240 total threads), running with 24 MPI tasks per node will cause
each MPI task to use a subset of 10 threads on the coprocessor. Fine
tuning of the number of threads to use per MPI task or the number of
threads to use per core can be accomplished with keyword settings of
the <a class="reference internal" href="package.html"><em>package intel</em></a> command.</li>
<li>If desired, only a fraction of the pair style computation can be
offloaded to the coprocessors. This is accomplished by using the
<em>balance</em> keyword in the <a class="reference internal" href="package.html"><em>package intel</em></a> command. A
balance of 0 runs all calculations on the CPU. A balance of 1 runs
all calculations on the coprocessor. A balance of 0.5 runs half of
the calculations on the coprocessor. Setting the balance to -1 (the
default) will enable dynamic load balancing that continously adjusts
the fraction of offloaded work throughout the simulation. This option
typically produces results within 5 to 10 percent of the optimal fixed
balance.</li>
<li>When using offload with CPU hyperthreading disabled, it may help
performance to use fewer MPI tasks and OpenMP threads than available
cores. This is due to the fact that additional threads are generated
internally to handle the asynchronous offload tasks.</li>
<li>If running short benchmark runs with dynamic load balancing, adding a
short warm-up run (10-20 steps) will allow the load-balancer to find a
near-optimal setting that will carry over to additional runs.</li>
<li>If pair computations are being offloaded to an Intel(R) Xeon Phi(TM)
coprocessor, a diagnostic line is printed to the screen (not to the
log file), during the setup phase of a run, indicating that offload
mode is being used and indicating the number of coprocessor threads
per MPI task. Additionally, an offload timing summary is printed at
the end of each run. When offloading, the frequency for <a class="reference internal" href="atom_modify.html"><em>atom sorting</em></a> is changed to 1 so that the per-atom data is
effectively sorted at every rebuild of the neighbor lists.</li>
<li>For simulations with long-range electrostatics or bond, angle,
dihedral, improper calculations, computation and data transfer to the
coprocessor will run concurrently with computations and MPI
communications for these calculations on the host CPU. The USER-INTEL
package has two modes for deciding which atoms will be handled by the
coprocessor. This choice is controlled with the <em>ghost</em> keyword of
the <a class="reference internal" href="package.html"><em>package intel</em></a> command. When set to 0, ghost atoms
(atoms at the borders between MPI tasks) are not offloaded to the
card. This allows for overlap of MPI communication of forces with
computation on the coprocessor when the <a class="reference internal" href="newton.html"><em>newton</em></a> setting
is “on”. The default is dependent on the style being used, however,
better performance may be achieved by setting this option
explictly.</li>
</ul>
<div class="section" id="restrictions">
<h2>Restrictions<a class="headerlink" href="#restrictions" title="Permalink to this headline">¶</a></h2>
<p>When offloading to a coprocessor, <a class="reference internal" href="pair_hybrid.html"><em>hybrid</em></a> styles
that require skip lists for neighbor builds cannot be offloaded.
Using <a class="reference internal" href="pair_hybrid.html"><em>hybrid/overlay</em></a> is allowed. Only one intel
accelerated style may be used with hybrid styles.
<a class="reference internal" href="special_bonds.html"><em>Special_bonds</em></a> exclusion lists are not currently
supported with offload, however, the same effect can often be
accomplished by setting cutoffs for excluded atom types to 0. None of
the pair styles in the USER-INTEL package currently support the
“inner”, “middle”, “outer” options for rRESPA integration via the
<a class="reference internal" href="run_style.html"><em>run_style respa</em></a> command; only the “pair” option is
Built with <a href="http://sphinx-doc.org/">Sphinx</a> using a <a href="https://github.com/snide/sphinx_rtd_theme">theme</a> provided by <a href="https://readthedocs.org">Read the Docs</a>.