Homec4science
Diffusion lammps (lammm-master-deprecated) Browse

lammps/doc/angle_class2.html
b704a82dafc5lammm-master-deprecated

Last Change
Raw File

angle_class2.html
View Options

<HTML>
<CENTER><A HREF = "http://lammps.sandia.gov">LAMMPS WWW Site</A> - <A HREF = "Manual.html">LAMMPS Documentation</A> - <A HREF = "Section_commands.html#comm">LAMMPS Commands</A>
</CENTER>
<HR>
<H3>angle_style class2 command
</H3>
<P><B>Syntax:</B>
</P>
<PRE>angle_style class2
</PRE>
<P><B>Examples:</B>
</P>
<PRE>angle_style class2
angle_coeff * 75.0
</PRE>
<P><B>Description:</B>
</P>
<P>The <I>class2</I> angle style uses the potential
</P>
<CENTER><IMG SRC = "Eqs/angle_class2.jpg">
</CENTER>
<P>where Ea is the angle term, Ebb is a bond-bond term, and Eba is a
bond-angle term. Theta0 is the equilibrium angle and r1 and r2 are
the equilibrium bond lengths.
</P>
<P>See <A HREF = "#Sun">(Sun)</A> for a description of the COMPASS class2 force field.
</P>
<P>For this style, only coefficients for the Ea formula can be specified
in the input script. These are the 4 coefficients:
</P>
<UL><LI>theta0 (degrees)
<LI>K2 (energy/radian^2)
<LI>K3 (energy/radian^2)
<LI>K4 (energy/radian^2)
</UL>
<P>Theta0 is specified in degrees, but LAMMPS converts it to radians
internally; hence the units of K are in energy/radian^2.
</P>
<P>Coefficients for the Ebb and Eba formulas must be specified in the
data file.
</P>
<P>For the Ebb formula, the coefficients are listed under a "BondBond
Coeffs" heading and each line lists 3 coefficients:
</P>
<UL><LI>M (energy/distance^2)
<LI>r1 (distance)
<LI>r2 (distance)
</UL>
<P>For the Eba formula, the coefficients are listed under a "BondAngle
Coeffs" heading and each line lists 4 coefficients:
</P>
<UL><LI>N1 (energy/distance^2)
<LI>N2 (energy/distance^2)
<LI>r1 (distance)
<LI>r2 (distance)
</UL>
<P>The theta0 value in the Eba formula is not specified, since it is the
same value from the Ea formula.
</P>
<P><B>Restrictions:</B>
</P>
<P>This angle style is part of the "class2" package. It is only enabled
if LAMMPS was built with that package. See the <A HREF = "Section_start.html#2_2">Making
LAMMPS</A> section for more info.
</P>
<P><B>Related commands:</B>
</P>
<P><A HREF = "angle_coeff.html">angle_coeff</A>
</P>
<P><B>Default:</B> none
</P>
<HR>
<A NAME = "Sun"></A>
<P><B>(Sun)</B> Sun, J Phys Chem B 102, 7338-7364 (1998).
</P>
</HTML>
c4science · Help