Homec4science
Diffusion lammps (lammm-master-deprecated) Browse

lammps/doc/fix_wall_piston.txt
c6213f36d34clammm-master-deprecated

Last Change
Raw File

fix_wall_piston.txt
View Options

"LAMMPS WWW Site"_lws - "LAMMPS Documentation"_ld - "LAMMPS Commands"_lc :c
:link(lws,http://lammps.sandia.gov)
:link(ld,Manual.html)
:link(lc,Section_commands.html#comm)
:line
fix wall/piston command :h3
[Syntax:]
fix ID group-ID wall/piston face ... keyword value ... :pre
ID, group-ID are documented in "fix"_fix.html command :ulb,l
wall/piston = style name of this fix command :l
face = {zlo} :l
zero or more keyword/value pairs may be appended :l
keyword = {pos} or {vel} or {ramp} or {units} :l
{pos} args = z
z = z coordinate at which the piston begins (distance units)
{vel} args = vz
vz = final velocity of the piston (velocity units)
{ramp} = use a linear velocity ramp from 0 to vz
{temp} args = target damp seed extent
target = target velocity for region immediately ahead of the piston
damp = damping paramter (time units)
seed = random number seed for langevin kicks
extent = extent of thermostated region (distance units)
{units} value = {lattice} or {box}
{lattice} = the wall position is defined in lattice units
{box} = the wall position is defined in simulation box units :pre
:ule
[Examples:]
fix xwalls all wall/piston zlo
fix walls all wall/piston zlo pos 1.0 vel 10.0 units box
fix top all wall/piston zlo vel 10.0 ramp :pre
[Description:]
Bound the simulation with a moving wall which reflect particles in the
specified group and drive the system with an effective infinite-mass
piston capable of driving shock waves.
A momentum mirror technique is used, which means that if an atom (or
the wall) moves such that an atom is outside the wall on a timestep by
a distance delta (e.g. due to "fix nve"_fix_nve.html), then it is put
back inside the face by the same delta, and the velocity relative to
the moving wall is flipped in z. For instance, a stationary particle
hit with a piston wall with velocity vz, will end the timestep with a
velocity of 2*vz.
Currently the {face} keyword can only be {zlo}. This creates a piston
moving in the positive z direction. Particles with z coordinate less
than the wall position are reflected to a z coordinate greater than
the wall position. If the piston velocity is vpz and the particle
velocity before reflection is vzi, the particle velocity after
reflection is -vzi + 2*vpz.
The initial position of the wall can be specified by the {pos} keyword.
The final velocity of the wall can be specified by the {vel} keyword
The {ramp} keyword will cause the wall/piston to adjust the velocity
linearly from zero velocity to {vel} over the course of the run. If
the {ramp} keyword is omitted then the wall/piston moves at a constant
velocity defined by {vel}.
The {temp} keyword will cause the region immediately in front of the
wall/piston to be thermostated with a Langevin thermostat. This
region moves with the piston. The damping and kicking are measured in
the reference frame of the piston. So, a temperature of zero would
mean all particles were moving at exactly the speed of the
wall/piston.
The {units} keyword determines the meaning of the distance units used
to define a wall position, but only when a numeric constant is used.
A {box} value selects standard distance units as defined by the
"units"_units.html command, e.g. Angstroms for units = real or metal.
A {lattice} value means the distance units are in lattice spacings.
The "lattice"_lattice.html command must have been previously used to
define the lattice spacings.
:line
[Restart, fix_modify, output, run start/stop, minimize info:]
No information about this fix is written to "binary restart
files"_restart.html. None of the "fix_modify"_fix_modify.html options
are relevant to this fix. No global or per-atom quantities are stored
by this fix for access by various "output
commands"_Section_howto.html#howoto_15. No parameter of this fix can
be used with the {start/stop} keywords of the "run"_run.html command.
This fix is not invoked during "energy minimization"_minimize.html.
[Restrictions:]
This fix style is part of the SHOCK package. It is only enabled if
LAMMPS was built with that package. See the "Making
LAMMPS"_Section_start.html#start_3 section for more info.
The face that has the wall/piston must be boundary type 's'
(shrink-wrapped). The opposing face can be
any boundary type other than periodic.
A wall/piston should not be used with rigid bodies such as those
defined by a "fix rigid" command. This is because the wall/piston
displaces atoms directly rather than exerting a force on them.
[Related commands:]
"fix wall/reflect"_fix_wall.html command, "fix
append/atoms"_fix_append_atoms.html command
[Default:]
The keyword defaults are pos = 0, vel = 0, units = lattice.
c4science · Help