Homec4science
Diffusion lammps (lammm-master-deprecated) Browse

lammps/doc/src/fix_reaxc_species.txt
df885d59ff66lammm-master-deprecated

Last Change
Raw File

fix_reaxc_species.txt
View Options

"LAMMPS WWW Site"_lws - "LAMMPS Documentation"_ld - "LAMMPS Commands"_lc :c
:link(lws,http://lammps.sandia.gov)
:link(ld,Manual.html)
:link(lc,Section_commands.html#comm)
:line
fix reax/c/species command :h3
[Syntax:]
fix ID group-ID reax/c/species Nevery Nrepeat Nfreq filename keyword value ... :pre
ID, group-ID are documented in "fix"_fix.html command :ulb,l
reax/c/species = style name of this command :l
Nevery = sample bond-order every this many timesteps :l
Nrepeat = # of bond-order samples used for calculating averages :l
Nfreq = calculate average bond-order every this many timesteps :l
filename = name of output file :l
zero or more keyword/value pairs may be appended :l
keyword = {cutoff} or {element} or {position} :l
{cutoff} value = I J Cutoff
I, J = atom types
Cutoff = Bond-order cutoff value for this pair of atom types
{element} value = Element1, Element2, ...
{position} value = posfreq filepos
posfreq = write position files every this many timestep
filepos = name of position output file :pre
:ule
[Examples:]
fix 1 all reax/c/species 10 10 100 species.out
fix 1 all reax/c/species 1 2 20 species.out cutoff 1 1 0.40 cutoff 1 2 0.55
fix 1 all reax/c/species 1 100 100 species.out element Au O H position 1000 AuOH.pos :pre
[Description:]
Write out the chemical species information computed by the ReaxFF
potential specified by "pair_style reax/c"_pair_reax_c.html.
Bond-order values (either averaged or instantaneous, depending on
value of {Nrepeat}) are used to determine chemical bonds. Every
{Nfreq} timesteps, chemical species information is written to
{filename} as a two line output. The first line is a header
containing labels. The second line consists of the following:
timestep, total number of molecules, total number of distinct species,
number of molecules of each species. In this context, "species" means
a unique molecule. The chemical formula of each species is given in
the first line.
Optional keyword {cutoff} can be assigned to change the minimum
bond-order values used in identifying chemical bonds between pairs of
atoms. Bond-order cutoffs should be carefully chosen, as bond-order
cutoffs that are too small may include too many bonds (which will
result in an error), while cutoffs that are too large will result in
fragmented molecules. The default cutoff of 0.3 usually gives good
results.
The optional keyword {element} can be used to specify the chemical
symbol printed for each LAMMPS atom type. The number of symbols must
match the number of LAMMPS atom types and each symbol must consist of
1 or 2 alphanumeric characters. Normally, these symbols should be
chosen to match the chemical identity of each LAMMPS atom type, as
specified using the "reax/c pair_coeff"_pair_reax_c.html command and
the ReaxFF force field file.
The optional keyword {position} writes center-of-mass positions of
each identified molecules to file {filepos} every {posfreq} timesteps.
The first line contains information on timestep, total number of
molecules, total number of distinct species, and box dimensions. The
second line is a header containing labels. From the third line
downward, each molecule writes a line of output containing the
following information: molecule ID, number of atoms in this molecule,
chemical formula, total charge, and center-of-mass xyz positions of
this molecule. The xyz positions are in fractional coordinates
relative to the box dimensions.
For the keyword {position}, the {filepos} is the name of the output
file. It can contain the wildcard character "*". If the "*"
character appears in {filepos}, then one file per snapshot is written
at {posfreq} and the "*" character is replaced with the timestep
value. For example, AuO.pos.* becomes AuO.pos.0, AuO.pos.1000, etc.
:line
The {Nevery}, {Nrepeat}, and {Nfreq} arguments specify on what
timesteps the bond-order values are sampled to get the average bond
order. The species analysis is performed using the average bond-order
on timesteps that are a multiple of {Nfreq}. The average is over
{Nrepeat} bond-order samples, computed in the preceding portion of the
simulation every {Nevery} timesteps. {Nfreq} must be a multiple of
{Nevery} and {Nevery} must be non-zero even if {Nrepeat} is 1.
Also, the timesteps
contributing to the average bond-order cannot overlap,
i.e. Nrepeat*Nevery can not exceed Nfreq.
For example, if Nevery=2, Nrepeat=6, and Nfreq=100, then bond-order
values on timesteps 90,92,94,96,98,100 will be used to compute the
average bond-order for the species analysis output on timestep 100.
:line
[Restart, fix_modify, output, run start/stop, minimize info:]
No information about this fix is written to "binary restart
files"_restart.html. None of the "fix_modify"_fix_modify.html options
are relevant to this fix.
This fix computes both a global vector of length 2 and a per-atom
vector, either of which can be accessed by various "output
commands"_Section_howto.html#howto_15. The values in the global
vector are "intensive".
The 2 values in the global vector are as follows:
1 = total number of molecules
2 = total number of distinct species :ul
The per-atom vector stores the molecule ID for each atom as identified
by the fix. If an atom is not in a molecule, its ID will be 0.
For atoms in the same molecule, the molecule ID for all of them
will be the same and will be equal to the smallest atom ID of
any atom in the molecule.
No parameter of this fix can be used with the {start/stop} keywords of
the "run"_run.html command. This fix is not invoked during "energy
minimization"_minimize.html.
[Restrictions:]
The fix species currently only works with
"pair_style reax/c"_pair_reax_c.html and it requires that the "pair_style
reax/c"_pair_reax_c.html be invoked. This fix is part of the
USER-REAXC package. It is only enabled if LAMMPS was built with that
package. See the "Making LAMMPS"_Section_start.html#start_3 section
for more info.
It should be possible to extend it to other reactive pair_styles (such as
"rebo"_pair_airebo.html, "airebo"_pair_airebo.html,
"comb"_pair_comb.html, and "bop"_pair_bop.html), but this has not yet been done.
[Related commands:]
"pair_style reax/c"_pair_reax_c.html, "fix
reax/bonds"_fix_reax_bonds.html
[Default:]
The default values for bond-order cutoffs are 0.3 for all I-J pairs. The
default element symbols are C, H, O, N. Position files are not written
by default.
c4science · Help