<spanid="index-0"></span><h1>pair_style lubricateU command<aclass="headerlink"href="#pair-style-lubricateu-command"title="Permalink to this headline">¶</a></h1>
<p>where U represents the velocities and angular velocities of the
particles, U^*infty* represents the velocities and the angular
velocities of the undisturbed fluid, and E^*infty* represents the rate
of strain tensor of the undisturbed fluid flow with viscosity
<em>mu</em>. Again, note that this is dynamic viscosity which has units of
mass/distance/time, not kinematic viscosity. Volume fraction
corrections to R_FU are included if <em>flagVF</em> is set to 1 (default).</p>
<p>F*rest* represents the forces and torques due to all other types of
interactions, e.g. Brownian, electrostatic etc. Note that this
algorithm neglects the inertial terms, thereby removing the
restriction of resolving the small interial time scale, which may not
be of interest for colloidal particles. This pair style solves for
the velocity such that the hydrodynamic force balances all other types
of forces, thereby resulting in a net zero force (zero inertia limit).
When defining this pair style, it must be defined last so that when
this style is invoked all other types of forces have already been
computed. For the same reason, it won’t work if additional non-pair
styles are defined (such as bond or Kspace forces) as they are
calculated in LAMMPS after the pairwise interactions have been
computed.</p>
<divclass="admonition note">
<pclass="first admonition-title">Note</p>
<pclass="last">When using these styles, the these pair styles are designed to
be used with implicit time integration and a correspondingly larger
timestep. Thus either <aclass="reference internal"href="fix_nve_noforce.html"><em>fix nve/noforce</em></a> should
be used for spherical particles defined via <aclass="reference internal"href="atom_style.html"><em>atom_style sphere</em></a> or <aclass="reference internal"href="fix_nve_asphere_noforce.html"><em>fix nve/asphere/noforce</em></a> should be used for
spherical particles defined via <aclass="reference internal"href="atom_style.html"><em>atom_style ellipsoid</em></a>. This is because the velocity and angular
momentum of each particle is set by the pair style, and should not be
<em>lubricateU/poly</em> allows for polydisperse spherical particles.</p>
<p>If the suspension is sheared via the <aclass="reference internal"href="fix_deform.html"><em>fix deform</em></a>
command then the pair style uses the shear rate to adjust the
hydrodynamic interactions accordingly. Volume changes due to fix
deform are accounted for when computing the volume fraction
corrections to R_FU.</p>
<p>When computing the volume fraction corrections to R_FU, the presence
of walls (whether moving or stationary) will affect the volume
fraction available to colloidal particles. This is currently accounted
for with the following types of walls: <aclass="reference internal"href="fix_wall.html"><em>wall/lj93</em></a>,
<aclass="reference internal"href="fix_wall.html"><em>wall/lj126</em></a>, <aclass="reference internal"href="fix_wall.html"><em>wall/colloid</em></a>, and
“wall/harmonic_fix_wall.html”. For these wall styles, the correct
volume fraction will be used when walls do not coincide with the box
boundary, as well as when walls move and thereby cause a change in the
volume fraction. To use these wall styles with pair_style <em>lubricateU</em>
or <em>lubricateU/poly</em>, the <em>fld yes</em> option must be specified in the
fix wall command.</p>
<p>Since lubrication forces are dissipative, it is usually desirable to
thermostat the system at a constant temperature. If Brownian motion
(at a constant temperature) is desired, it can be set using the
<aclass="reference internal"href="pair_brownian.html"><em>pair_style brownian</em></a> command. These pair styles
and the brownian style should use consistent parameters for <em>mu</em>,
<em>flaglog</em>, <em>flagfld</em>, <em>cutinner</em>, <em>cutoff</em>, <em>flagHI</em> and <em>flagVF</em>.</p>
<hrclass="docutils"/>
<p>The following coefficients must be defined for each pair of atoms
types via the <aclass="reference internal"href="pair_coeff.html"><em>pair_coeff</em></a> command as in the examples
above, or in the data file or restart files read by the
<aclass="reference internal"href="read_data.html"><em>read_data</em></a> or <aclass="reference internal"href="read_restart.html"><em>read_restart</em></a>
commands, or by mixing as described below:</p>
<ulclass="simple">
<li>cutinner (distance units)</li>
<li>cutoff (distance units)</li>
</ul>
<p>The two coefficients are optional. If neither is specified, the two
cutoffs specified in the pair_style command are used. Otherwise both
<p>For atom type pairs I,J and I != J, the two cutoff distances for this
pair style can be mixed. The default mix value is <em>geometric</em>. See
the “pair_modify” command for details.</p>
<p>This pair style does not support the <aclass="reference internal"href="pair_modify.html"><em>pair_modify</em></a>
shift option for the energy of the pair interaction.</p>
<p>The <aclass="reference internal"href="pair_modify.html"><em>pair_modify</em></a> table option is not relevant
for this pair style.</p>
<p>This pair style does not support the <aclass="reference internal"href="pair_modify.html"><em>pair_modify</em></a>
tail option for adding long-range tail corrections to energy and
pressure.</p>
<p>This pair style writes its information to <aclass="reference internal"href="restart.html"><em>binary restart files</em></a>, so pair_style and pair_coeff commands do not need
to be specified in an input script that reads a restart file.</p>
<p>This pair style can only be used via the <em>pair</em> keyword of the
<aclass="reference internal"href="run_style.html"><em>run_style respa</em></a> command. It does not support the
<h2>Restrictions<aclass="headerlink"href="#restrictions"title="Permalink to this headline">¶</a></h2>
<p>These styles are part of the FLD package. They are only enabled if
LAMMPS was built with that package. See the <spanclass="xref std std-ref">Making LAMMPS</span> section for more info.</p>
<p>Currently, these pair styles assume that all other types of
forces/torques on the particles have been already been computed when
it is invoked. This requires this style to be defined as the last of
the pair styles, and that no fixes apply additional constraint forces.
One exception is the <aclass="reference internal"href="fix_wall.html"><em>fix wall/colloid</em></a> commands, which
has an “fld” option to apply their wall forces correctly.</p>
<p>Only spherical monodisperse particles are allowed for pair_style
lubricateU.</p>
<p>Only spherical particles are allowed for pair_style lubricateU/poly.</p>
<p>For sheared suspensions, it is assumed that the shearing is done in
the xy plane, with x being the velocity direction and y being the
velocity-gradient direction. In this case, one must use <aclass="reference internal"href="fix_deform.html"><em>fix deform</em></a> with the same rate of shear (erate).</p>
</div>
<divclass="section"id="related-commands">
<h2>Related commands<aclass="headerlink"href="#related-commands"title="Permalink to this headline">¶</a></h2>
Built with <ahref="http://sphinx-doc.org/">Sphinx</a> using a <ahref="https://github.com/snide/sphinx_rtd_theme">theme</a> provided by <ahref="https://readthedocs.org">Read the Docs</a>.