Homec4science
Diffusion lammps (lammm-master) Browse

lammps/examples/USER/atc/thermal/in.bar1d_combined
666de878addclammm-master

Last Change
Raw File

in.bar1d_combined
View Options

#AtC Thermal Coupling
# This benchmark tests heat conducting into an MD region at a fixed temperature at one end. The
# temperature is intially 20 everywhere and the left boundary BC is fixed at
# 40.# The result should show heat diffusing through the FEM to the MD and back
# out # to the FEM on the right. Insufficient time is captured to reach the
# linear # steady state, but heat crossing the boundaries should be observed,
# as should the interaction of the two themostat types.
#echo both
units real
atom_style atomic
# create domain
#lattice type reduced density rho* = 4*(sigma/a)^3, where N=4 for fcc, s = 3.405 A (Wagner) and a = 5.25 A (Ashcroft & Mermin, p. 70)
# NOTE following 3 lines added for restart
boundary f p p
pair_style lj/cut 13.5
read_data temp.init
lattice fcc 5.405 origin 0.25 0.25 0.25
region simRegion block -16 4 -3 3 -3 3
# create atoms, NOTE commented out for restart
#region mdRegion block -5 5 -3 3 -3 3
#boundary f p p
#create_box 1 mdRegion
#create_atoms 1 region mdRegion
#mass 1 39.95
# specify interal/ghost atoms
region mdInternal block -4 4 -3 3 -3 3
group internal region mdInternal
region mdGhost block -5 -4 -3 3 -3 3
group ghost region mdGhost
# velocities have Vcm = 0, NOTE next four lines commented out for restart
#velocity internal create 40. 87287 mom yes loop geom
#pair_style lj/cut 13.5
##pair_coeff 1 1 0.010323166 3.405 13.5
#pair_coeff 1 1 .238 3.405 13.5
neighbor 5. bin
neigh_modify every 10 delay 0 check no
#write_restart tinit.dat
# ID group atc PhysicsType ParameterFile
fix AtC internal atc thermal Ar_thermal.mat
fix_modify AtC boundary ghost
fix_modify AtC time_integration fractional_step
fix_modify AtC internal_quadrature off
# ID part keywords nx ny nz region
fix_modify AtC mesh create 10 1 1 simRegion f p p
fix_modify AtC mesh create_faceset ibndy box -4.0 40.0 -INF INF -INF INF in
fix_modify AtC mesh create_faceset obndy box -4.0 40.0 -INF INF -INF INF outward
# fix a temperature
fix_modify AtC fix temperature all 20.
# turn on thermostat
fix_modify AtC control thermal rescale 10
variable xdof equal 3*count(ghost)
compute_modify thermo_temp extra ${xdof}
thermo_style custom step cpu etotal pe f_AtC[1] temp f_AtC[2]
thermo_modify format 1 %6i format 2 %7.2g
# equilibrate MD field
#fix_modify AtC output bar1dfe_combined_init 100
timestep 5
thermo 10
run 400
# change thermostat to flux
fix_modify AtC unfix temperature all
fix_modify AtC control thermal flux faceset obndy
#fix_modify AtC control thermal hoover
fix_modify AtC control localized_lambda on
#fix_modify AtC control tolerance 1.e-16 # this tolerance seems necessary to prevent noticeable drift
# add nodesets
# ID mesh create_nodeset tag xmin xmax ymin ymax zmin zmax
fix_modify AtC mesh create_nodeset lbc -16.1 -15.9 -INF INF -INF INF
fix_modify AtC mesh create_nodeset rbc 3.9 4.1 -INF INF -INF INF
fix_modify AtC fix temperature lbc 40.
fix_modify AtC fix temperature rbc 20.
# equilibrate filter
fix_modify AtC filter type exponential
fix_modify AtC filter scale 1000.0
#fix_modify AtC filter on
thermo 100
#run 100
# set up output, should be before a "run"
fix_modify AtC output bar1d_combinedFE 100 text
# ouput command
#dump D1 all atom 100 dump.bar1d_combined
# run with FE
reset_timestep 0
thermo 100
run 5000
c4science · Help