<li>zero or more keyword/arg pairs may be appended</li>
<li>keyword = <em>mode</em> or <em>file</em> or <em>ave</em> or <em>start</em> or <em>off</em> or <em>overwrite</em> or <em>title1</em> or <em>title2</em> or <em>title3</em></li>
</ul>
<preclass="literal-block">
<em>mode</em> arg = <em>scalar</em> or <em>vector</em>
scalar = all input values are global scalars
vector = all input values are global vectors or global arrays
<em>ave</em> args = <em>one</em> or <em>running</em> or <em>window M</em>
one = output a new average value every Nfreq steps
running = output cummulative average of all previous Nfreq steps
window M = output average of M most recent Nfreq steps
<em>start</em> args = Nstart
Nstart = start averaging on this timestep
<em>off</em> arg = M = do not average this value
M = value # from 1 to Nvalues
<em>file</em> arg = filename
filename = name of file to output time averages to
<em>overwrite</em> arg = none = overwrite output file with only latest output
<em>format</em> arg = string
string = C-style format string
<em>title1</em> arg = string
string = text to print as 1st line of output file
<em>title2</em> arg = string
string = text to print as 2nd line of output file
<em>title3</em> arg = string
string = text to print as 3rd line of output file, only for vector mode
<p>Use one or more global values as inputs every few timesteps, and
average them over longer timescales. The resulting averages can be
used by other <aclass="reference internal"href="Section_howto.html#howto-15"><spanclass="std std-ref">output commands</span></a> such as
<aclass="reference internal"href="thermo_style.html"><spanclass="doc">thermo_style custom</span></a>, and can also be written to a
file. Note that if no time averaging is done, this command can be
used as a convenient way to simply output one or more global values to
a file.</p>
<p>The group specified with this command is ignored. However, note that
specified values may represent calculations performed by computes and
fixes which store their own “group” definitions.</p>
<p>Each listed value can be the result of a <aclass="reference internal"href="compute.html"><spanclass="doc">compute</span></a> or
<aclass="reference internal"href="fix.html"><spanclass="doc">fix</span></a> or the evaluation of an equal-style or vector-style
<aclass="reference internal"href="variable.html"><spanclass="doc">variable</span></a>. In each case, the compute, fix, or variable
must produce a global quantity, not a per-atom or local quantity. If
you wish to spatial- or time-average or histogram per-atom quantities
from a compute, fix, or variable, then see the <aclass="reference internal"href="fix_ave_chunk.html"><spanclass="doc">fix ave/chunk</span></a>, <aclass="reference internal"href="fix_ave_atom.html"><spanclass="doc">fix ave/atom</span></a>,
or <aclass="reference internal"href="fix_ave_histo.html"><spanclass="doc">fix ave/histo</span></a> commands. If you wish to sum a
per-atom quantity into a single global quantity, see the <aclass="reference internal"href="compute_reduce.html"><spanclass="doc">compute reduce</span></a> command.</p>
<p><aclass="reference internal"href="compute.html"><spanclass="doc">Computes</span></a> that produce global quantities are those which
do not have the word <em>atom</em> in their style name. Only a few
<aclass="reference internal"href="fix.html"><spanclass="doc">fixes</span></a> produce global quantities. See the doc pages for
individual fixes for info on which ones produce such values.
<aclass="reference internal"href="variable.html"><spanclass="doc">Variables</span></a> of style <em>equal</em> and <em>vector</em> are the only
ones that can be used with this fix. Variables of style <em>atom</em> cannot
be used, since they produce per-atom values.</p>
<p>The input values must either be all scalars or all vectors depending
on the setting of the <em>mode</em> keyword. In both cases, the averaging is
performed independently on each input value. I.e. each input scalar
is averaged independently or each element of each input vector is
averaged independently.</p>
<p>If <em>mode</em> = scalar, then the input values must be scalars, or vectors
with a bracketed term appended, indicating the Ith value of the vector
is used.</p>
<p>If <em>mode</em> = vector, then the input values must be vectors, or arrays
with a bracketed term appended, indicating the Ith column of the array
is used. All vectors must be the same length, which is the length of
the vector or number of rows in the array.</p>
<p>Note that for values from a compute or fix, the bracketed index I can
be specified using a wildcard asterisk with the index to effectively
specify multiple values. This takes the form “*” or “<em>n” or “n</em>” or
“m*n”. If N = the size of the vector (for <em>mode</em> = scalar) or the
number of columns in the array (for <em>mode</em> = vector), then an asterisk
with no numeric values means all indices from 1 to N. A leading
asterisk means all indices from 1 to n (inclusive). A trailing
asterisk means all indices from n to N (inclusive). A middle asterisk
means all indices from m to n (inclusive).</p>
<p>Using a wildcard is the same as if the individual elements of the
vector or columns of the array had been listed one by one. E.g. these
2 fix ave/time commands are equivalent, since the <aclass="reference internal"href="compute_rdf.html"><spanclass="doc">compute rdf</span></a> command creates, in this case, a global array
<p>The <em>Nevery</em>, <em>Nrepeat</em>, and <em>Nfreq</em> arguments specify on what
timesteps the input values will be used in order to contribute to the
average. The final averaged quantities are generated on timesteps
that are a mlutiple of <em>Nfreq</em>. The average is over <em>Nrepeat</em>
quantities, computed in the preceding portion of the simulation every
<em>Nevery</em> timesteps. <em>Nfreq</em> must be a multiple of <em>Nevery</em> and
<em>Nevery</em> must be non-zero even if <em>Nrepeat</em> is 1. Also, the timesteps
contributing to the average value cannot overlap,
i.e. Nrepeat*Nevery can not exceed Nfreq.</p>
<p>For example, if Nevery=2, Nrepeat=6, and Nfreq=100, then values on
timesteps 90,92,94,96,98,100 will be used to compute the final average
on timestep 100. Similarly for timesteps 190,192,194,196,198,200 on
timestep 200, etc. If Nrepeat=1 and Nfreq = 100, then no time
averaging is done; values are simply generated on timesteps
100,200,etc.</p>
<hrclass="docutils"/>
<p>If a value begins with “<ahref="#id1"><spanclass="problematic"id="id2">c_</span></a>”, a compute ID must follow which has been
previously defined in the input script. If <em>mode</em> = scalar, then if
no bracketed term is appended, the global scalar calculated by the
compute is used. If a bracketed term is appended, the Ith element of
the global vector calculated by the compute is used. If <em>mode</em> =
vector, then if no bracketed term is appended, the global vector
calculated by the compute is used. If a bracketed term is appended,
the Ith column of the global array calculated by the compute is used.
See the discussion above for how I can be specified with a wildcard
asterisk to effectively specify multiple values.</p>
<p>Note that there is a <aclass="reference internal"href="compute_reduce.html"><spanclass="doc">compute reduce</span></a> command
which can sum per-atom quantities into a global scalar or vector which
can thus be accessed by fix ave/time. Or it can be a compute defined
not in your input script, but by <aclass="reference internal"href="thermo_style.html"><spanclass="doc">thermodynamic output</span></a> or other fixes such as <aclass="reference internal"href="fix_nh.html"><spanclass="doc">fix nvt</span></a> or <aclass="reference internal"href="fix_temp_rescale.html"><spanclass="doc">fix temp/rescale</span></a>. See
the doc pages for these commands which give the IDs of these computes.
Users can also write code for their own compute styles and <aclass="reference internal"href="Section_modify.html"><spanclass="doc">add them to LAMMPS</span></a>.</p>
<p>If a value begins with “<ahref="#id3"><spanclass="problematic"id="id4">f_</span></a>”, a fix ID must follow which has been
previously defined in the input script. If <em>mode</em> = scalar, then if
no bracketed term is appended, the global scalar calculated by the fix
is used. If a bracketed term is appended, the Ith element of the
global vector calculated by the fix is used. If <em>mode</em> = vector, then
if no bracketed term is appended, the global vector calculated by the
fix is used. If a bracketed term is appended, the Ith column of the
global array calculated by the fix is used. See the discussion above
for how I can be specified with a wildcard asterisk to effectively
specify multiple values.</p>
<p>Note that some fixes only produce their values on certain timesteps,
which must be compatible with <em>Nevery</em>, else an error will result.
Users can also write code for their own fix styles and <aclass="reference internal"href="Section_modify.html"><spanclass="doc">add them to LAMMPS</span></a>.</p>
<p>If a value begins with “<ahref="#id5"><spanclass="problematic"id="id6">v_</span></a>”, a variable name must follow which has
been previously defined in the input script. If <em>mode</em> = scalar, then
only equal-style or vector-style variables can be used, which both
produce global values. In this mode, a vector-style variable requires
a bracketed term to specify the Ith element of the vector calculated
by the variable. If <em>mode</em> = vector, then only a vector-style
variable can be used, without a bracketed term. See the
<aclass="reference internal"href="variable.html"><spanclass="doc">variable</span></a> command for details.</p>
<p>Note that variables of style <em>equal</em> and <em>vector</em> define a formula
which can reference individual atom properties or thermodynamic
keywords, or they can invoke other computes, fixes, or variables when
they are evaluated, so this is a very general means of specifying
quantities to time average.</p>
<hrclass="docutils"/>
<p>Additional optional keywords also affect the operation of this fix.</p>
<p>If the <em>mode</em> keyword is set to <em>scalar</em>, then all input values must
be global scalars, or elements of global vectors. If the <em>mode</em>
keyword is set to <em>vector</em>, then all input values must be global
vectors, or columns of global arrays. They can also be global arrays,
which are converted into a series of global vectors (one per column),
as explained above.</p>
<p>The <em>ave</em> keyword determines how the values produced every <em>Nfreq</em>
steps are averaged with values produced on previous steps that were
multiples of <em>Nfreq</em>, before they are accessed by another output
command or written to a file.</p>
<p>If the <em>ave</em> setting is <em>one</em>, then the values produced on timesteps
that are multiples of <em>Nfreq</em> are independent of each other; they are
output as-is without further averaging.</p>
<p>If the <em>ave</em> setting is <em>running</em>, then the values produced on
timesteps that are multiples of <em>Nfreq</em> are summed and averaged in a
cummulative sense before being output. Each output value is thus the
average of the value produced on that timestep with all preceding
values. This running average begins when the fix is defined; it can
only be restarted by deleting the fix via the <aclass="reference internal"href="unfix.html"><spanclass="doc">unfix</span></a>
command, or by re-defining the fix by re-specifying it.</p>
<p>If the <em>ave</em> setting is <em>window</em>, then the values produced on
timesteps that are multiples of <em>Nfreq</em> are summed and averaged within
a moving “window” of time, so that the last M values are used to
produce the output. E.g. if M = 3 and Nfreq = 1000, then the output
on step 10000 will be the average of the individual values on steps
8000,9000,10000. Outputs on early steps will average over less than M
values if they are not available.</p>
<p>The <em>start</em> keyword specifies what timestep averaging will begin on.
The default is step 0. Often input values can be 0.0 at time 0, so
setting <em>start</em> to a larger value can avoid including a 0.0 in a
running or windowed average.</p>
<p>The <em>off</em> keyword can be used to flag any of the input values. If a
value is flagged, it will not be time averaged. Instead the most
recent input value will always be stored and output. This is useful
if one of more of the inputs produced by a compute or fix or variable
are effectively constant or are simply current values. E.g. they are
being written to a file with other time-averaged values for purposes
of creating well-formatted output.</p>
<p>The <em>file</em> keyword allows a filename to be specified. Every <em>Nfreq</em>
steps, one quantity or vector of quantities is written to the file for
each input value specified in the fix ave/time command. For <em>mode</em> =
scalar, this means a single line is written each time output is
performed. Thus the file ends up to be a series of lines, i.e. one
column of numbers for each input value. For <em>mode</em> = vector, an array
of numbers is written each time output is performed. The number of
rows is the length of the input vectors, and the number of columns is
the number of values. Thus the file ends up to be a series of these
array sections.</p>
<p>The <em>overwrite</em> keyword will continuously overwrite the output file
with the latest output, so that it only contains one timestep worth of
output. This option can only be used with the <em>ave running</em> setting.</p>
<p>The <em>format</em> keyword sets the numeric format of each value when it is
printed to a file via the <em>file</em> keyword. Note that all values are
floating point quantities. The default format is %g. You can specify
a higher precision if desired, e.g. %20.16g.</p>
<p>The <em>title1</em> and <em>title2</em> and <em>title3</em> keywords allow specification of
the strings that will be printed as the first 2 or 3 lines of the
output file, assuming the <em>file</em> keyword was used. LAMMPS uses
default values for each of these, so they do not need to be specified.</p>
<p>By default, these header lines are as follows for <em>mode</em> = scalar:</p>
<divclass="highlight-default"><divclass="highlight"><pre><span></span><spanclass="c1"># Time-averaged data for fix ID</span>
<h2>Restart, fix_modify, output, run start/stop, minimize info</h2>
<p>No information about this fix is written to <aclass="reference internal"href="restart.html"><spanclass="doc">binary restart files</span></a>. None of the <aclass="reference internal"href="fix_modify.html"><spanclass="doc">fix_modify</span></a> options
are relevant to this fix.</p>
<p>This fix produces a global scalar or global vector or global array
which can be accessed by various <aclass="reference internal"href="Section_howto.html#howto-15"><spanclass="std std-ref">output commands</span></a>. The values can only be
accessed on timesteps that are multiples of <em>Nfreq</em> since that is when
averaging is performed.</p>
<p>A scalar is produced if only a single input value is averaged and
<em>mode</em> = scalar. A vector is produced if multiple input values are
averaged for <em>mode</em> = scalar, or a single input value for <em>mode</em> =
vector. In the first case, the length of the vector is the number of
inputs. In the second case, the length of the vector is the same as
the length of the input vector. An array is produced if multiple
input values are averaged and <em>mode</em> = vector. The global array has #
of rows = length of the input vectors and # of columns = number of
inputs.</p>
<p>If the fix prouduces a scalar or vector, then the scalar and each
element of the vector can be either “intensive” or “extensive”,
depending on whether the values contributing to the scalar or vector
element are “intensive” or “extensive”. If the fix produces an array,
then all elements in the array must be the same, either “intensive” or
“extensive”. If a compute or fix provides the value being time
averaged, then the compute or fix determines whether the value is
intensive or extensive; see the doc page for that compute or fix for
further info. Values produced by a variable are treated as intensive.</p>
<p>No parameter of this fix can be used with the <em>start/stop</em> keywords of
the <aclass="reference internal"href="run.html"><spanclass="doc">run</span></a> command. This fix is not invoked during <aclass="reference internal"href="minimize.html"><spanclass="doc">energy minimization</span></a>.</p>
Built with <ahref="http://sphinx-doc.org/">Sphinx</a> using a <ahref="https://github.com/snide/sphinx_rtd_theme">theme</a> provided by <ahref="https://readthedocs.org">Read the Docs</a>.