Homec4science
Diffusion lammps (lammps-icms) Browse

lammps/doc/pair_srp.txt
28bf73fbf744lammps-icms

Last Change
Raw File

pair_srp.txt
View Options

"LAMMPS WWW Site"_lws - "LAMMPS Documentation"_ld - "LAMMPS Commands"_lc :c
:link(lws,http://lammps.sandia.gov)
:link(ld,Manual.html)
:link(lc,Section_commands.html#comm)
:line
pair_style srp command :h3
[Syntax:]
pair_style srp cutoff btype dist keyword value ...
cutoff = global cutoff for SRP interactions (distance units) :ulb,l
btype = bond type to apply SRP interactions to (can be wildcard, see below) :l
distance = {min} or {mid} :l
zero or more keyword/value pairs may be appended :l
keyword = {exclude} :l
{bptype} value = atom type for bond particles
{exclude} value = {yes} or {no} :pre
:ule
[Examples:]
pair_style hybrid dpd 1.0 1.0 12345 srp 0.8 1 mid exclude yes
pair_coeff 1 1 dpd 60.0 4.5 1.0
pair_coeff 1 2 none
pair_coeff 2 2 srp 100.0 0.8 :pre
pair_style hybrid dpd 1.0 1.0 12345 srp 0.8 * min exclude yes
pair_coeff 1 1 dpd 60.0 50 1.0
pair_coeff 1 2 none
pair_coeff 2 2 srp 40.0 :pre
pair_style hybrid srp 0.8 2 mid
pair_coeff 1 1 none
pair_coeff 1 2 none
pair_coeff 2 2 srp 100.0 0.8 :pre
[Description:]
Style {srp} computes a soft segmental repulsive potential (SRP) that
acts between pairs of bonds. This potential is useful for preventing
bonds from passing through one another when a soft non-bonded
potential acts between beads in, for example, DPD polymer chains. An
example input script that uses this command is provided in
examples/USER/srp.
Bonds of specified type {btype} interact with one another through a
bond-pairwise potential, such that the force on bond {i} due to bond
{j} is as follows
:c,image(Eqs/pair_srp1.jpg)
where {r} and {rij} are the distance and unit vector between the two
bonds. Note that {btype} can be specified as an asterisk "*", which
case the interaction is applied to all bond types. The {mid} option
computes {r} and {rij} from the midpoint distance between bonds. The
{min} option computes {r} and {rij} from the minimum distance between
bonds. The force acting on a bond is mapped onto the two bond atoms
according to the lever rule,
:c,image(Eqs/pair_srp2.jpg)
where {L} is the normalized distance from the atom to the point of
closest approach of bond {i} and {j}. The {mid} option takes {L} as
0.5 for each interaction as described in "(Sirk)"_#Sirk.
The following coefficients must be defined via the
"pair_coeff"_pair_coeff.html command as in the examples above, or in
the data file or restart file read by the "read_data"_read_data.html
or "read_restart"_read_restart.html commands:
{C} (force units)
{rc} (distance units) :ul
The last coefficient is optional. If not specified, the global cutoff
is used.
NOTE: Pair style srp considers each bond of type {btype} to be a
fictitious "particle" of type {bptype}, where {bptype} is either the
largest atom type in the system, or the type set by the {bptype} flag.
Any actual existing particles with this atom type will be deleted at
the beginning of a run. This means you must specify the number of
types in your system accordingly; usually to be one larger than what
would normally be the case, e.g. via the "create_box"_create_box.html
or by changing the header in your "data file"_read_data.html. The
ficitious "bond particles" are inserted at the beginning of the run,
and serve as placeholders that define the position of the bonds. This
allows neighbor lists to be constructed and pairwise interactions to
be computed in almost the same way as is done for actual particles.
Because bonds interact only with other bonds, "pair_style
hybrid"_pair_hybrid.html should be used to turn off interactions
between atom type {bptype} and all other types of atoms. An error
will be flagged if "pair_style hybrid"_pair_hybrid.html is not used.
The optional {exclude} keyword determines if forces are computed
between first neighbor (directly connected) bonds. For a setting of
{no}, first neighbor forces are computed; for {yes} they are not
computed. A setting of {no} cannot be used with the {min} option for
distance calculation because the the minimum distance between directly
connected bonds is zero.
Pair style {srp} turns off normalization of thermodynamic properties
by particle number, as if the command "thermo_modify norm
no"_thermo_modify.html had been issued.
The pairwise energy associated with style {srp} is shifted to be zero
at the cutoff distance {rc}.
:line
[Mixing, shift, table, tail correction, restart, rRESPA info]:
This pair styles does not support mixing.
This pair style does not support the "pair_modify"_pair_modify.html
shift option for the energy of the pair interaction. Note that as
discussed above, the energy term is already shifted to be 0.0 at the
cutoff distance {rc}.
The "pair_modify"_pair_modify.html table option is not relevant for
this pair style.
This pair style does not support the "pair_modify"_pair_modify.html
tail option for adding long-range tail corrections to energy and
pressure.
This pair style writes global and per-atom information to "binary
restart files"_restart.html. Pair srp should be used with "pair_style
hybrid"_pair_hybrid.html, thus the pair_coeff commands need to be
specified in the input script when reading a restart file.
This pair style can only be used via the {pair} keyword of the
"run_style respa"_run_style.html command. It does not support the
{inner}, {middle}, {outer} keywords.
:line
[Restrictions:]
This pair style is part of the USER-MISC package. It is only enabled
if LAMMPS was built with that package. See the Making LAMMPS section
for more info.
This pair style must be used with "pair_style
hybrid"_pair_hybrid.html.
This pair style requires the "newton"_newton.html command to be {on}
for non-bonded interactions.
[Related commands:]
"pair_style hybrid"_pair_hybrid.html, "pair_coeff"_pair_coeff.html,
"pair dpd"_pair_dpd.html
[Default:]
The default keyword value is exclude = yes.
:line
:link(Sirk)
[(Sirk)] Sirk TW, Sliozberg YR, Brennan JK, Lisal M, Andzelm JW, J
Chem Phys, 136 (13) 134903, 2012.
c4science · Help