Homec4science
Diffusion lammps (lammps-icms) Browse

lammps/doc/src/compute_pair_local.txt
5abac962ed66lammps-icms

Last Change
Raw File

compute_pair_local.txt
View Options

"LAMMPS WWW Site"_lws - "LAMMPS Documentation"_ld - "LAMMPS Commands"_lc :c
:link(lws,http://lammps.sandia.gov)
:link(ld,Manual.html)
:link(lc,Section_commands.html#comm)
:line
compute pair/local command :h3
[Syntax:]
compute ID group-ID pair/local value1 value2 ... keyword args ... :pre
ID, group-ID are documented in "compute"_compute.html command :ulb,l
pair/local = style name of this compute command :l
one or more values may be appended :l
value = {dist} or {eng} or {force} or {fx} or {fy} or {fz} or {pN} :l
{dist} = pairwise distance
{eng} = pairwise energy
{force} = pairwise force
{fx},{fy},{fz} = components of pairwise force
{pN} = pair style specific quantities for allowed N values :pre
zero or more keyword/arg pairs may be appended :l
keyword = {cutoff} :l
{cutoff} arg = {type} or {radius} :pre
:ule
[Examples:]
compute 1 all pair/local eng
compute 1 all pair/local dist eng force
compute 1 all pair/local dist eng fx fy fz
compute 1 all pair/local dist fx fy fz p1 p2 p3 :pre
[Description:]
Define a computation that calculates properties of individual pairwise
interactions. The number of datums generated, aggregated across all
processors, equals the number of pairwise interactions in the system.
The local data stored by this command is generated by looping over the
pairwise neighbor list. Info about an individual pairwise interaction
will only be included if both atoms in the pair are in the specified
compute group, and if the current pairwise distance is less than the
force cutoff distance for that interaction, as defined by the
"pair_style"_pair_style.html and "pair_coeff"_pair_coeff.html
commands.
The value {dist} is the distance bewteen the pair of atoms.
The value {eng} is the interaction energy for the pair of atoms.
The value {force} is the force acting between the pair of atoms, which
is positive for a repulsive force and negative for an attractive
force. The values {fx}, {fy}, and {fz} are the xyz components of
{force} on atom I.
A pair style may define additional pairwise quantities which can be
accessed as {p1} to {pN}, where N is defined by the pair style. Most
pair styles do not define any additional quantities, so N = 0. An
example of ones that do are the "granular pair styles"_pair_gran.html
which calculate the tangential force between two particles and return
its components and magnitude acting on atom I for N = 1,2,3,4. See
individual pair styles for detils.
The value {dist} will be in distance "units"_units.html. The value
{eng} will be in energy "units"_units.html. The values {force}, {fx},
{fy}, and {fz} will be in force "units"_units.html. The values {pN}
will be in whatever units the pair style defines.
The optional {cutoff} keyword determines how the force cutoff distance
for an interaction is determined. For the default setting of {type},
the pairwise cutoff defined by the "pair_style"_pair_style.html
command for the types of the two atoms is used. For the {radius}
setting, the sum of the radii of the two particles is used as a
cutoff. For example, this is appropriate for granular particles which
only interact when they are overlapping, as computed by "granular pair
styles"_pair_gran.txt.
Note that as atoms migrate from processor to processor, there will be
no consistent ordering of the entries within the local vector or array
from one timestep to the next. The only consistency that is
guaranteed is that the ordering on a particular timestep will be the
same for local vectors or arrays generated by other compute commands.
For example, pair output from the "compute
property/local"_compute_property_local.html command can be combined
with data from this command and output by the "dump local"_dump.html
command in a consistent way.
Here is an example of how to do this:
compute 1 all property/local patom1 patom2
compute 2 all pair/local dist eng force
dump 1 all local 1000 tmp.dump index c_1\[1\] c_1\[2\] c_2\[1\] c_2\[2\] c_2\[3\] :pre
NOTE: For pairs, if two atoms I,J are involved in 1-2, 1-3, 1-4
interactions within the molecular topology, their pairwise interaction
may be turned off, and thus they may not appear in the neighbor list,
and will not be part of the local data created by this command. More
specifically, this will be true of I,J pairs with a weighting factor
of 0.0; pairs with a non-zero weighting factor are included. The
weighting factors for 1-2, 1-3, and 1-4 pairwise interactions are set
by the "special_bonds"_special_bonds.html command. An exception is if
long-range Coulombics are being computed via the
"kspace_style"_kspace_style.html command, then atom pairs with
weighting factors of zero are still included in the neighbor list, so
that a portion of the long-range interaction contribution can be
computed in the pair style. Hence in that case, those atom pairs will
be part of the local data created by this command.
[Output info:]
This compute calculates a local vector or local array depending on the
number of keywords. The length of the vector or number of rows in the
array is the number of pairs. If a single keyword is specified, a
local vector is produced. If two or more keywords are specified, a
local array is produced where the number of columns = the number of
keywords. The vector or array can be accessed by any command that
uses local values from a compute as input. See "this
section"_Section_howto.html#howto_15 for an overview of LAMMPS output
options.
The output for {dist} will be in distance "units"_units.html. The
output for {eng} will be in energy "units"_units.html. The output for
{force}, {fx}, {fy}, and {fz} will be in force "units"_units.html.
The outpur for {pN} will be in whatever units the pair style defines.
[Restrictions:] none
[Related commands:]
"dump local"_dump.html, "compute
property/local"_compute_property_local.html
[Default:]
The keyword default is cutoff = type.
c4science · Help