Homec4science
Diffusion lammps (lammps-icms) Browse

lammps/doc/src/dihedral_nharmonic.txt
3759b7e2ddc5lammps-icms

Last Change
Raw File

dihedral_nharmonic.txt
View Options

"LAMMPS WWW Site"_lws - "LAMMPS Documentation"_ld - "LAMMPS Commands"_lc :c
:link(lws,http://lammps.sandia.gov)
:link(ld,Manual.html)
:link(lc,Section_commands.html#comm)
:line
dihedral_style nharmonic command :h3
dihedral_style nharmonic/omp command :h3
[Syntax:]
dihedral_style nharmonic :pre
[Examples:]
dihedral_style nharmonic
dihedral_coeff 3 10.0 20.0 30.0 :pre
[Description:]
The {nharmonic} dihedral style uses the potential:
:c,image(Eqs/dihedral_nharmonic.jpg)
The following coefficients must be defined for each dihedral type via the
"dihedral_coeff"_dihedral_coeff.html command as in the example above, or in
the data file or restart files read by the "read_data"_read_data.html
or "read_restart"_read_restart.html commands:
n (integer >=1)
A1 (energy)
A2 (energy)
...
An (energy) :ul
:line
Styles with a {cuda}, {gpu}, {intel}, {kk}, {omp}, or {opt} suffix are
functionally the same as the corresponding style without the suffix.
They have been optimized to run faster, depending on your available
hardware, as discussed in "Section_accelerate"_Section_accelerate.html
of the manual. The accelerated styles take the same arguments and
should produce the same results, except for round-off and precision
issues.
These accelerated styles are part of the USER-CUDA, GPU, USER-INTEL,
KOKKOS, USER-OMP and OPT packages, respectively. They are only
enabled if LAMMPS was built with those packages. See the "Making
LAMMPS"_Section_start.html#start_3 section for more info.
You can specify the accelerated styles explicitly in your input script
by including their suffix, or you can use the "-suffix command-line
switch"_Section_start.html#start_7 when you invoke LAMMPS, or you can
use the "suffix"_suffix.html command in your input script.
See "Section_accelerate"_Section_accelerate.html of the manual for
more instructions on how to use the accelerated styles effectively.
:line
[Restrictions:]
This angle style can only be used if LAMMPS was built with the
USER_MISC package. See the "Making LAMMPS"_Section_start.html#start_3
section for more info on packages.
[Related commands:]
"dihedral_coeff"_dihedral_coeff.html
[Default:] none
c4science · Help