data_format.html
b611b8e05617master

data_format.html
View Options

			<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
			<HTML>
			<HEAD>
			<META NAME="Generator" CONTENT="Cosmo Create 1.0.3">
			</HEAD>
			<BODY>
			<H2>
			LAMMPS Data Format</H2>
			<P>
			<A HREF="README.html">Return</A> to top-level of LAMMPS documentation</P>
			<P>
			This file describes the format of the data file read into LAMMPS with
			the "read data" command. The data file contains basic
			information about the size of the problem to be run, the initial atomic
			coordinates, molecular topology, and (optionally) force-field
			coefficients. It will be easiest to understand this file if you read it
			while looking at a sample data file from the examples.</P>
			<P>
			This page has 2 sections:</P>
			<UL>
			<LI>
			<A HREF="#_cch3_930958962">Rules for formatting the Data File</A>
			<LI>
			<A HREF="#_cch3_930958969">Sample file with Annotations</A>
			</UL>
			<HR>
			<H3>
			<A NAME="_cch3_930958962">Rules for formatting the Data File: </A></H3>
			<P>
			Blank lines are important. After the header section, new entries are
			separated by blank lines. </P>
			<P>
			Indentation and space between words/numbers on one line is not
			important except that entry keywords (e.g. Masses, Bond Coeffs) must be
			left-justified and capitalized as shown. </P>
			<P>
			The header section (thru box bounds) must appear first in the file, the
			remaining entries (Masses, various Coeffs, Atoms, Bonds, etc) can come
			in any order. </P>
			<P>
			These entries must be in the file: header section, Masses, Atoms. </P>
			<P>
			These entries must be in the file if there are a non-zero number of
			them: Bonds, Angles, Dihedrals, Impropers, Bond Coeffs, Angle Coeffs,
			Dihedral Coeffs, Improper Coeffs. Cross-term coefficients for a
			particular kind of interaction (e.g. BondAngle Coeffs for bonds) must
			appear if class II force fields have been turned on in the input
			command file via a "style" command. </P>
			<P>
			The Nonbond Coeffs entry contains one line for each atom type. These
			are the coefficients for an interaction between 2 atoms of the same
			type. The cross-type coeffs are computed by the appropriate class I or
			class II mixing rules, or can be specified explicitly using the
			"nonbond coeff" command in the input command script. See the <A
			HREF="force_fields.html">force_fields</A> page for more information. </P>
			<P>
			The Nonbond Coeffs and Bond Coeffs entries are optional since they can
			be specified from the input command script. This is not true if bond
			style is set to class II since those coeffs can only be specified in
			this data file. </P>
			<P>
			In the Atoms entry, the atoms can be in any order so long as there are
			N entries. The 1st number on the line is the atom-tag (number from 1 to
			N) which is used to identify the atom throughout the simulation. The
			molecule-tag is a second identifier which is attached to the atom; it
			can be 0, or a counter for the molecule the atom is part of, or any
			other number you wish. The q value is the charge of the atom in
			electron units (e.g. +1 for a proton). The xyz values are the initial
			position of the atom. For 2-d simulations specify z as 0.0.</P>
			<P>
			The final 3 nx,ny,nz values on a line of the Atoms entry are optional.
			LAMMPS only reads them if the "true flag" command is
			specified in the input command script. Otherwise they are initialized
			to 0 by LAMMPS. Their meaning, for each dimension, is that
			"n" box-lengths are added to xyz to get the atom's
			"true" un-remapped position. This can be useful in pre- or
			post-processing to enable the unwrapping of long-chained molecules
			which wrap thru the periodic box one or more times. The value of
			"n" can be positive, negative, or zero. For 2-d simulations
			specify nz as 0. </P>
			<P>
			For simulations with periodic boundary conditions, xyz are remapped
			into the periodic box (from as far away as needed), so the initial
			coordinates need not be inside the box. The nx,ny,nz values (as read in
			or as set to zero by LAMMPS) are appropriately adjusted by this
			remapping. </P>
			<P>
			The number of coefficients specified on each line of coefficient
			entries (Nonbond Coeffs, Bond Coeffs, etc) depends on the
			"style" of interaction. This is specified in the input
			command script, unless the default is used. See the <A
			HREF="input_commands.html">input_commands</A> page for a description
			of the various style options. The <A HREF="input_commands.html">input_commands</A>
			and <A HREF="force_fields.html">force_fields</A> pages explain the
			meaning and valid ranges for each of the coefficients. </P>
			<HR>
			<H3>
			<A NAME="_cch3_930958969">Sample file with Annotations</A></H3>
			<P>
			Here is a sample file with annotations in parenthesis and lengthy
			sections replaced by dots (...). Note that the blank lines are
			important in this example.</P>
			<PRE>

			LAMMPS Description (1st line of file)

			100 atoms (this must be the 3rd line, 1st 2 lines are ignored)
			95 bonds (# of bonds to be simulated)
			50 angles (include these lines even if number = 0)
			30 dihedrals
			20 impropers

			5 atom types (# of nonbond atom types)
			10 bond types (# of bond types = sets of bond coefficients)
			18 angle types
			20 dihedral types (do not include a bond,angle,dihedral,improper type
			2 improper types line if number of bonds,angles,etc is 0)

			-0.5 0.5 xlo xhi (for periodic systems this is box size,
			-0.5 0.5 ylo yhi for non-periodic it is min/max extent of atoms)
			-0.5 0.5 zlo zhi (do not include this line for 2-d simulations)

			Masses

			1 mass
			...
			N mass (N = # of atom types)

			Nonbond Coeffs

			1 coeff1 coeff2 ...
			...
			N coeff1 coeff2 ... (N = # of atom types)

			Bond Coeffs

			1 coeff1 coeff2 ...
			...
			N coeff1 coeff2 ... (N = # of bond types)

			Angle Coeffs

			1 coeff1 coeff2 ...
			...
			N coeff1 coeff2 ... (N = # of angle types)

			Dihedral Coeffs

			1 coeff1 coeff2 ...
			...
			N coeff1 coeff2 ... (N = # of dihedral types)

			Improper Coeffs

			1 coeff1 coeff2 ...
			...
			N coeff1 coeff2 ... (N = # of improper types)

			BondBond Coeffs

			1 coeff1 coeff2 ...
			...
			N coeff1 coeff2 ... (N = # of angle types)

			BondAngle Coeffs

			1 coeff1 coeff2 ...
			...
			N coeff1 coeff2 ... (N = # of angle types)

			MiddleBondTorsion Coeffs

			1 coeff1 coeff2 ...
			...
			N coeff1 coeff2 ... (N = # of dihedral types)

			EndBondTorsion Coeffs

			1 coeff1 coeff2 ...
			...
			N coeff1 coeff2 ... (N = # of dihedral types)

			AngleTorsion Coeffs

			1 coeff1 coeff2 ...
			...
			N coeff1 coeff2 ... (N = # of dihedral types)

			AngleAngleTorsion Coeffs

			1 coeff1 coeff2 ...
			...
			N coeff1 coeff2 ... (N = # of dihedral types)

			BondBond13 Coeffs

			1 coeff1 coeff2 ...
			...
			N coeff1 coeff2 ... (N = # of dihedral types)

			AngleAngle Coeffs

			1 coeff1 coeff2 ...
			...
			N coeff1 coeff2 ... (N = # of improper types)

			Atoms

			1 molecule-tag atom-type q x y z nx ny nz (nx,ny,nz are optional -
			... see "true flag" input command)
			...
			N molecule-tag atom-type q x y z nx ny nz (N = # of atoms)

			Bonds

			1 bond-type atom-1 atom-2
			...
			N bond-type atom-1 atom-2 (N = # of bonds)

			Angles

			1 angle-type atom-1 atom-2 atom-3 (atom-2 is the center atom in angle)
			...
			N angle-type atom-1 atom-2 atom-3 (N = # of angles)

			Dihedrals

			1 dihedral-type atom-1 atom-2 atom-3 atom-4 (atoms 2-3 form central bond)
			...
			N dihedral-type atom-1 atom-2 atom-3 atom-4 (N = # of dihedrals)

			Impropers

			1 improper-type atom-1 atom-2 atom-3 atom-4 (atom-1 is central atom)
			...
			N improper-type atom-1 atom-2 atom-3 atom-4 (N = # of impropers)
			</PRE>
			</BODY>
			</HTML>

lammps/doc/html/99/data_format.htmlb611b8e05617master

data_format.htmlView Options

lammps/doc/html/99/data_format.html
b611b8e05617master

data_format.html
View Options