Homec4science
Diffusion lammps (master) Browse

lammps/doc/src/compute_centro_atom.txt
b1b4a52b14e2master

Last Change
Raw File

compute_centro_atom.txt
View Options

"LAMMPS WWW Site"_lws - "LAMMPS Documentation"_ld - "LAMMPS Commands"_lc :c
:link(lws,http://lammps.sandia.gov)
:link(ld,Manual.html)
:link(lc,Section_commands.html#comm)
:line
compute centro/atom command :h3
[Syntax:]
compute ID group-ID centro/atom lattice keyword value ... :pre
ID, group-ID are documented in "compute"_compute.html command
centro/atom = style name of this compute command
lattice = {fcc} or {bcc} or N = # of neighbors per atom to include :l
zero or more keyword/value pairs may be appended :l
keyword = {axes} :l
{axes} value = {no} or {yes}
{no} = do not calculate 3 symmetry axes
{yes} = calculate 3 symmetry axes :pre
:ule
[Examples:]
compute 1 all centro/atom fcc :pre
compute 1 all centro/atom 8 :pre
[Description:]
Define a computation that calculates the centro-symmetry parameter for
each atom in the group, for either FCC or BCC lattices, depending on
the choice of the {lattice} argument. In solid-state systems the
centro-symmetry parameter is a useful measure of the local lattice
disorder around an atom and can be used to characterize whether the
atom is part of a perfect lattice, a local defect (e.g. a dislocation
or stacking fault), or at a surface.
The value of the centro-symmetry parameter will be 0.0 for atoms not
in the specified compute group.
This parameter is computed using the following formula from
"(Kelchner)"_#Kelchner
:c,image(Eqs/centro_symmetry.jpg)
where the {N} nearest neighbors of each atom are identified and Ri and
Ri+N/2 are vectors from the central atom to a particular pair of
nearest neighbors. There are N*(N-1)/2 possible neighbor pairs that
can contribute to this formula. The quantity in the sum is computed
for each, and the N/2 smallest are used. This will typically be for
pairs of atoms in symmetrically opposite positions with respect to the
central atom; hence the i+N/2 notation.
{N} is an input parameter, which should be set to correspond to the
number of nearest neighbors in the underlying lattice of atoms. If
the keyword {fcc} or {bcc} is used, {N} is set to 12 and 8
respectively. More generally, {N} can be set to a positive, even
integer.
For an atom on a lattice site, surrounded by atoms on a perfect
lattice, the centro-symmetry parameter will be 0. It will be near 0
for small thermal perturbations of a perfect lattice. If a point
defect exists, the symmetry is broken, and the parameter will be a
larger positive value. An atom at a surface will have a large
positive parameter. If the atom does not have {N} neighbors (within
the potential cutoff), then its centro-symmetry parameter is set to
0.0.
If the keyword {axes} has the setting {yes}, then this compute also
estimates three symmetry axes for each atom's local neighborhood. The
first two of these are the vectors joining the two pairs of neighbor
atoms with smallest contributions to the centrosymmetry parameter,
i.e. the two most symmetric pairs of atoms. The third vector is
normal to the first two by the right-hand rule. All three vectors are
normalized to unit length. For FCC crystals, the first two vectors
will lie along a <110> direction, while the third vector will lie
along either a <100> or <111> direction. For HCP crystals, the first
two vectors will lie along <1000> directions, while the third vector
will lie along <0001>. This provides a simple way to measure local
orientation in HCP structures. In general, the {axes} keyword can be
used to estimate the orientation of symmetry axes in the neighborhood
of any atom.
Only atoms within the cutoff of the pairwise neighbor list are
considered as possible neighbors. Atoms not in the compute group are
included in the {N} neighbors used in this calculation.
The neighbor list needed to compute this quantity is constructed each
time the calculation is performed (e.g. each time a snapshot of atoms
is dumped). Thus it can be inefficient to compute/dump this quantity
too frequently or to have multiple compute/dump commands, each with a
{centro/atom} style.
[Output info:]
By default, this compute calculates the centrosymmetry value for each
atom as a per-atom vector, which can be accessed by any command that
uses per-atom values from a compute as input. See "Section
6.15"_Section_howto.html#howto_15 for an overview of LAMMPS output
options.
If the {axes} keyword setting is {yes}, then a per-atom array is
calculated. The first column is the centrosymmetry parameter. The
next three columns are the x, y, and z components of the first
symmetry axis, followed by the second, and third symmetry axes in
columns 5-7 and 8-10.
The centrosymmetry values are unitless values >= 0.0. Their magnitude
depends on the lattice style due to the number of contributing neighbor
pairs in the summation in the formula above. And it depends on the
local defects surrounding the central atom, as described above. For
the {axes yes} case, the vector components are also unitless, since
they represent spatial directions.
Here are typical centro-symmetry values, from a nanoindentation
simulation into gold (FCC). These were provided by Jon Zimmerman
(Sandia):
Bulk lattice = 0
Dislocation core ~ 1.0 (0.5 to 1.25)
Stacking faults ~ 5.0 (4.0 to 6.0)
Free surface ~ 23.0 :pre
These values are *not* normalized by the square of the lattice
parameter. If they were, normalized values would be:
Bulk lattice = 0
Dislocation core ~ 0.06 (0.03 to 0.075)
Stacking faults ~ 0.3 (0.24 to 0.36)
Free surface ~ 1.38 :pre
For BCC materials, the values for dislocation cores and free surfaces
would be somewhat different, due to their being only 8 neighbors instead
of 12.
[Restrictions:] none
[Related commands:]
"compute cna/atom"_compute_cna_atom.html
[Default:]
The default value for the optional keyword is axes = no.
:line
:link(Kelchner)
[(Kelchner)] Kelchner, Plimpton, Hamilton, Phys Rev B, 58, 11085 (1998).
c4science · Help